Rodrigo Arias 6aba89a8a8 Rename trace-model.md to just trace.md

2024-09-17 13:31:46 +02:00

8.9 KiB

Raw Blame History

Trace specification v3

!!! Important

This document refers to the trace specification for
the version 3

The ovni instrumentation library libovni stores the information collected in a runtime trace following the specification of this document.

Structure

An ovni runtime trace (or simply, a trace) is composed of one or more streams, which are directories containing two mandatory files:

stream.json the stream metadata in JSON format.
stream.obs the binary stream with events.

Each stream is assigned to a single part in the part model, usually assigned to a given thread.

There are no imposed rules on how to organize the several streams into directories, but libovni uses the following approach for thread streams:

The complete trace is stored in a top-level directory named ovni. Inside this directory you will find the loom directories. The name of the loom directory is built from the loom parameter of ovni_proc_init(), prefixing it with loom..

Each loom directory contains one directory per process of that loom. The name is composed of the proc. prefix and the PID of the process specified in the pid argument to ovni_proc_init().

Inside each process there is one directory for each thread, composed by the thread. prefix and the TID, which are the streams. The files stream.json and stream.obs reside inside. Example:

ovni/loom.mio.nosv-u1000/proc.89719/thread.89719/stream.json
ovni/loom.mio.nosv-u1000/proc.89719/thread.89719/stream.obs

This structure prevents collisions among threads with the same TID among nodes, while allowing dumping events from a single thread, process or loom with ovnidump.

Stream metadata

The stream.json metadata file contains information about the part that the stream is assigned to. This is generally used to determine the hierarchy of the part model.

The JSON must be an object (dictionary) with the following mandatory keys:

version: a number specifying the version of the metadata format. Must have the value 3 for this version.

The rest of information is stored for each model.

In particular, the ovni model enforces the use of:

ovni.part: the type of part this stream is assigned to, usually thread.
ovni.require: a dictionary of model name and version which will determine which models are enabled at emulation and the required version.
ovni.finished: must be 1 to ensure the stream is complete (mandatory in all streams).

Thread stream metadata

For thread streams, the following attributes are used.

ovni.tid: the TID of the thread (mandatory, per-thread).
ovni.pid: the PID of the process that the thread belongs to (mandatory, per-thread).
ovni.app_id: the application ID of the process (optional, per-process).
ovni.rank: the rank of the MPI process (optional, per-process).
ovni.nranks: number of total MPI processes (optional, per-process).
ovni.loom: the name of the loom that the process belongs to (mandatory, per-process).
ovni.loom_cpus: the array of N CPUs available in the loom (mandatory, per-loom). Each element is a dictionary with the keys:
- index: containing the logical CPU index from 0 to N - 1.
- phyid: the number of the CPU as given by the operating system (which can exceed N).

Notice that some attributes don't need to be present in all thread streams. For example, per-process requires that at least one thread contains the attribute for each process. Similarly, per-loom requires that at least one thread of the loom emits the attribute.

The final attribute value will be computed by merging all the values from the children metadata. Simple values like numbers or strings must match exactly if they appear duplicated, arrays are appended.

Other attributes can be used for other models.

Here is an example of the stream.json file for a thread of a nOS-V program:

{
    "version": 3,
    "ovni": {
        "lib": {
            "version": "1.10.0",
            "commit": "dirty"
        },
        "part": "thread",
        "tid": 89719,
        "pid": 89719,
        "loom": "mio.nosv-u1000",
        "app_id": 1,
        "require": {
            "ovni": "1.1.0",
            "nosv": "2.3.0"
        },
        "loom_cpus": [
            { "index": 0, "phyid": 0 },
            { "index": 1, "phyid": 1 },
            { "index": 2, "phyid": 2 },
            { "index": 3, "phyid": 3 }
        ],
        "finished": 1
    },
    "nosv": {
        "can_breakdown": false,
        "lib_version": "2.3.1"
    }
}

Binary stream

!!! Important

Binary streams have version 1

A binary stream is a binary file named stream.obs that contains a succession of events with monotonically increasing clock values. They have a small header and the variable size events just after the header.

The header contains the magic 4 bytes of "ovni" and a version number of 4 bytes too. Here is a figure of the data stored in disk on a little endian machine:

Similarly, events have a fixed size header followed by an optional payload of varying size. The header has the following information:

Event flags
Payload size in a special format
Model, category and value codes
Time in nanoseconds

The event size can vary depending on the data stored in the payload. The payload size is specified using 4 bits, with the value 0x0 for no payload, or with value `v` for `v + 1` bytes of payload. This allows us to use 16 bytes of payload with value 0xf at the cost of sacrificing payloads of one byte.

There are two types of events, depending of the size needed for the payload:

Normal events: with a payload up to 16 bytes
Jumbo events: with a payload up to `2^{32}` bytes

Normal events

The normal events are composed of:

4 bits of flags
4 bits of payload size
3 bytes for the MCV
8 bytes for the clock
0 to 16 bytes of payload

Here is an example of a normal event without payload, a total of 12 bytes:

00 4f 48 65 01 c5 cf 1d  96 d0 12 00              |.OHe........|

And in the following figure you can see every field annotated:

Another example of a normal event with 16 bytes of payload, a total of 28 bytes:

0f 4f 48 78 58 c1 b0 b5  95 43 11 00 00 00 00 00  |.OHxX....C......|
ff ff ff ff 00 00 00 00  00 00 00 00              |............|

In the following figure you can see each field annotated:

Jumbo events

The jumbo events are just like normal events but they can hold large data. The size of the jumbo data is stored as a 32 bits integer as a normal payload, and the jumbo data just follows the event.

4 bits of flags
4 bits of payload size (always 4 with value 0x3)
3 bytes for the MCV
8 bytes for the clock
4 bytes of payload with the size of the jumbo data
0 to 2^32 bytes of jumbo data

Example of a jumbo event of 30 bytes in total, with 14 bytes of jumbo data:

13 56 59 63 eb c1 4b 1a  96 d0 12 00 0e 00 00 00  |.VYc..K.........|
01 00 00 00 74 65 73 74  74 79 70 65 31 00        |....testtype1.|

In the following figure you can see each field annotated:

Design considerations

The binary stream format has been designed to be very simple, so writing a parser library would take no more than 2 days for a single developer.

The size of the events has been designed to be small, with 12 bytes per event when no payload is used.

!!! Caution

The events are stored in disk following the endianness of the
machine where they are generated. So a stream generated with a
little endian machine would be different than on a big endian
machine. We assume the same endiannes is used to write the trace
at runtime and read it after, at the emulation process.

The events are designed to be easily identified when looking at the raw stream in binary, as the MCV codes can be read as ASCII characters:

00000000  6f 76 6e 69 01 00 00 00  0f 4f 48 78 08 ba 2e 5c  |ovni.....OHx...\|
00000010  b5 b0 00 00 00 00 00 00  ff ff ff ff 00 00 00 00  |................|
00000020  00 00 00 00 13 56 59 63  3c c2 2e 5c b5 b0 00 00  |.....VYc<..\....|
00000030  0e 00 00 00 01 00 00 00  74 65 73 74 74 79 70 65  |........testtype|
00000040  31 00 07 56 54 63 43 cc  2e 5c b5 b0 00 00 01 00  |1..VTcC..\......|
00000050  00 00 01 00 00 00 03 56  54 78 03 cd 2e 5c b5 b0  |.......VTx...\..|
00000060  00 00 01 00 00 00 03 56  54 70 2b 7d 37 5c b5 b0  |.......VTp+}7\..|
00000070  00 00 01 00 00 00 03 56  54 72 c3 4d 40 5c b5 b0  |.......VTr.M@\..|
00000080  00 00 01 00 00 00 03 56  54 65 03 36 49 5c b5 b0  |.......VTe.6I\..|
00000090  00 00 01 00 00 00 00 4f  48 65 f5 36 49 5c b5 b0  |.......OHe.6I\..|
000000a0  00 00                                             |..|

This allows a human to detect signs of corruption by visually inspecting the streams.

Limitations

The streams are designed to be read only forward, as they only contain the size of each event in the header.

8.9 KiB Raw Blame History