Rodrigo Arias Mallo
fcf4977a65
The AXI UART 16550 v2.0 from Xilinx only seem to require 32 bytes for the registes, but let's reduce the changes with the original DTS.
209 lines
6.4 KiB
Plaintext
209 lines
6.4 KiB
Plaintext
/dts-v1/;
|
|
/ {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>; /* 64 bits memory addresses */
|
|
compatible = "riscv,rv64i";
|
|
model = "Barcelona Supercomputing Center - Lagarto Ox (NixOS)";
|
|
// chosen {
|
|
// bootargs = "earlyprintk ignore_loglevel earlycon=sbi console=hvc0 root=/dev/pmem0p1 ro init=/bin/bash";
|
|
// };
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
/* Timer */
|
|
timebase-frequency = <50000>; /* 50 kHz */
|
|
CPU0: cpu@0 {
|
|
clock-frequency = <50000000>; /* 50 MHz */
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
status = "okay";
|
|
compatible = "riscv";
|
|
riscv,isa = "rv64imafd";
|
|
mmu-type = "riscv,sv39";
|
|
tlb-split;
|
|
phandle = <0x00000004>;
|
|
/* Hart-Level Interrupt Controller: Every interrupt is
|
|
* ultimately routed through a hart's HLIC before it
|
|
* interrupts that hart. */
|
|
HLIC0: interrupt-controller {
|
|
#interrupt-cells = <1>;
|
|
interrupt-controller; /* Receives interrupts */
|
|
compatible = "riscv,cpu-intc";
|
|
phandle = <0x5>;
|
|
};
|
|
};
|
|
cpu-map {
|
|
cluster0 {
|
|
core0 {
|
|
cpu = <&CPU0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
/* Memory layout:
|
|
*
|
|
* [0x0_6000_0000, 0x0_7000_0000) -> DMA pool (256 MiB)
|
|
* [0x0_7000_0000, 0x0_8000_0000) -> DMA pool (256 MiB)
|
|
* [0x0_8000_0000, 0x0_fff0_0000) -> RAM memory (2047 MiB)
|
|
* [0x0_fff0_0000, 0x1_0000_0000) -> Empty (1 MiB)
|
|
* [0x1_0000_0000, 0x1_c000_0000) -> PMEM (3072 MiB)
|
|
* [0x1_c000_0000, 0x2_8000_0000) -> Empty (3072 MiB)
|
|
*/
|
|
memory@80000000 {
|
|
device_type = "memory";
|
|
reg = <0x0 0x80000000 0x0 0x7ff00000>;
|
|
};
|
|
reserved-memory {
|
|
#address-cells = <2>; /* Starting address and size */
|
|
#size-cells = <2>; /* 64 bits memory addresses */
|
|
ranges;
|
|
eth_pool: dma_pool@60000000 {
|
|
reg = <0x0 0x60000000 0x0 0x10000000>;
|
|
compatible = "shared-dma-pool";
|
|
};
|
|
onic_pool: dma_pool@70000000 {
|
|
reg = <0x0 0x70000000 0x0 0x10000000>;
|
|
compatible = "shared-dma-pool";
|
|
};
|
|
};
|
|
// eth0_clk: eth0_clk {
|
|
// compatible = "fixed-clock";
|
|
// #clock-cells = <0x00000000>;
|
|
// clock-frequency = <0x09502f90>;
|
|
// phandle = <0x00000002>;
|
|
// };
|
|
pmem@100000000 {
|
|
/* volatile; This property indicates that this region is
|
|
* actually backed by non-persistent memory. This lets the OS
|
|
* know that it may skip the cache flushes required to ensure
|
|
* data is made persistent after a write. */
|
|
volatile;
|
|
compatible = "pmem-region";
|
|
reg = <0x1 0x00000000 0x0 0xc0000000>;
|
|
};
|
|
soc {
|
|
#address-cells = <0x00000002>;
|
|
#size-cells = <0x00000002>;
|
|
compatible = "BSC,Lagarto-ox-soc", "simple-bus";
|
|
ranges;
|
|
SERIAL: serial@40001000 {
|
|
compatible = "ns16550";
|
|
reg = <0x0 0x40001000 0x0 0x1000>;
|
|
interrupts = <1>; /* Output interrupt 1 */
|
|
interrupt-parent = <&PLIC>;
|
|
reg-shift = <2>;
|
|
/* This clock is the SERIAL_CLK */
|
|
clock-frequency = <50000000>;
|
|
current-speed = <115200>;
|
|
status = "okay";
|
|
};
|
|
|
|
// ethernet0 {
|
|
// xlnx,rxmem = <0x000005f2>;
|
|
// carv,mtu = <0x000005dc>;
|
|
// carv,no-mac;
|
|
// device_type = "network";
|
|
// local-mac-address = [02 05 00 01 00 05];
|
|
// axistream-connected = <0x000000fe>;
|
|
// compatible = "xlnx,xxv-ethernet-1.0-carv";
|
|
// memory-region = <ð_pool>;
|
|
// };
|
|
// dma@40400000 {
|
|
// xlnx,include-dre;
|
|
// phandle = <0x000000fe>;
|
|
// #dma-cells = <0x00000001>;
|
|
// compatible = "xlnx,axi-dma-1.00.a";
|
|
// clock-names = "s_axi_lite_aclk", "m_axi_mm2s_aclk", "m_axi_s2mm_aclk", "m_axi_sg_aclk";
|
|
// clocks = <ð0_clk>, <ð0_clk>, <ð0_clk>, <ð0_clk>;
|
|
// reg = <0x00000000 0x40400000 0x00000000 0x00400000>;
|
|
// interrupt-names = "mm2s_introut", "s2mm_introut";
|
|
// interrupt-parent = <&PLIC>;
|
|
// interrupts = <2 3>;
|
|
// xlnx,addrwidth = <0x00000028>;
|
|
// xlnx,include-sg;
|
|
// xlnx,sg-length-width = <0x00000017>;
|
|
// dma-channel@40400000 {
|
|
// compatible = "xlnx,axi-dma-mm2s-channel";
|
|
// dma-channels = <0x00000000>;
|
|
// interrupts = <0x00000002>;
|
|
// xlnx,datawidth = <0x00000040>;
|
|
// xlnx,device-id = <0x00000000>;
|
|
// xlnx,include-dre;
|
|
// };
|
|
// dma-channel@40400030 {
|
|
// compatible = "xlnx,axi-dma-s2mm-channel";
|
|
// dma-channels = <0x00000001>;
|
|
// interrupts = <0x00000003>;
|
|
// xlnx,datawidth = <0x00000040>;
|
|
// xlnx,device-id = <0x00000000>;
|
|
// xlnx,include-dre;
|
|
// };
|
|
// };
|
|
|
|
/* Platform-Level Interrupt Controller: Delivers interrupts to
|
|
* HARTs. */
|
|
PLIC: plic@40800000 {
|
|
compatible = "riscv,plic0";
|
|
interrupt-controller; /* Receives interrupts */
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
/* Sends interrupts to HART interrupt controllers */
|
|
|
|
/*
|
|
* From: linux-6.6.1/arch/riscv/include/asm/csr.h
|
|
*
|
|
* Interrupt causes (minus the high bit)
|
|
* #define IRQ_S_SOFT 1
|
|
* #define IRQ_VS_SOFT 2
|
|
* #define IRQ_M_SOFT 3
|
|
* #define IRQ_S_TIMER 5
|
|
* #define IRQ_VS_TIMER 6
|
|
* #define IRQ_M_TIMER 7
|
|
* #define IRQ_S_EXT 9
|
|
* #define IRQ_VS_EXT 10
|
|
* #define IRQ_M_EXT 11
|
|
* #define IRQ_S_GEXT 12
|
|
* #define IRQ_PMU_OVF 13
|
|
* #define IRQ_LOCAL_MAX (IRQ_PMU_OVF + 1)
|
|
* #define IRQ_LOCAL_MASK GENMASK((IRQ_LOCAL_MAX - 1), 0)
|
|
*/
|
|
interrupts-extended = <&HLIC0 11>, <&HLIC0 9>;
|
|
reg = < 0x0 0x40800000 0x0 0x00400000>;
|
|
riscv,ndev = <3>;
|
|
//riscv,max-priority = <0x7>;
|
|
phandle = <0x3>;
|
|
};
|
|
/* Core Local Interruptor: It directly connects to the timer and
|
|
* inter-processor interrupt lines of various HARTs (or CPUs) so
|
|
* RISC-V per-HART (or per-CPU) local interrupt controller is
|
|
* the parent interrupt controller for CLINT device. The clock
|
|
* frequency of CLINT is specified via "timebase-frequency" DT
|
|
* property of "/cpus" DT node. The "timebase-frequency" DT
|
|
* property is described in
|
|
* Documentation/devicetree/bindings/riscv/cpus.yaml
|
|
*/
|
|
timer@40002000 {
|
|
reg = <0x0 0x40002000 0x0 0x000c0000>;
|
|
reg-names = "control";
|
|
interrupts-extended = <&HLIC0 3>, <&HLIC0 7>;
|
|
/*<&CPU0 0x3>, <&CPU0 0x7>,*/
|
|
/*<&onic_pool 0x3>, <&onic_pool 0x7>,*/
|
|
/*<&SERIAL 0x3>, <&SERIAL 0x7>*/
|
|
compatible = "riscv,clint0";
|
|
};
|
|
|
|
/* Guesswork: There must be a timer at 0x40170000 as it is
|
|
* initialized in OpenSBI. It seems to drive the console. */
|
|
//SERIAL_CLK: timer@40170000 {
|
|
// clock-frequency = <100000000>;
|
|
// clocks = <&clk_bus_0>;
|
|
// compatible = "xlnx,xps-timer-1.00.a";
|
|
// interrupt-parent = <&axi_intc_1>;
|
|
// interrupts = <2 2>;
|
|
// reg = <0x41c00000 0x10000>;
|
|
// xlnx,count-width = <0x20>;
|
|
// xlnx,one-timer-only = <0x0>;
|
|
//};
|
|
};
|
|
};
|