1715 lines
71 KiB
Markdown
1715 lines
71 KiB
Markdown
## 2024-07-02
|
|
|
|
Aleix provided some notes on how to trace the kernel using tracepoints that are
|
|
printed to the console:
|
|
|
|
```
|
|
BOOT TIME TRACING
|
|
- compile with CONFIG_BOOTTIME_TRACING=y
|
|
- add to kernel parameters:
|
|
trace_options=sym-addr trace_event=initcall:* tp_printk trace_buf_size=1M ftrace=function ftrace_filter="vfs*"
|
|
trace_options=sym-addr trace_event=sched:* tp_printk trace_buf_size=1M
|
|
- tp_printk sends tracepoint (TRACE_EVENT) to printk buffer
|
|
- trace_event=[subsytem:event]; accepts
|
|
- *:<event_name>
|
|
- <subsystem>:*
|
|
- *:* all
|
|
- many more options at https://www.kernel.org/doc/html/latest/trace/boottime-trace.html
|
|
```
|
|
|
|
Start with:
|
|
|
|
```
|
|
trace_options=sym-addr trace_event=sched:* tp_printk trace_buf_size=1M loglevel=7
|
|
```
|
|
|
|
Can it be caused by the D extension? If I set the ISA to:
|
|
|
|
```
|
|
riscv,isa = "rv64imaf";
|
|
```
|
|
|
|
It locks the stage1 script without providing any output. Let see trying again.
|
|
Locked again.
|
|
|
|
I can disable the FPU in the kernel, and then it will act as a detector of any
|
|
floating point instruction.
|
|
|
|
Then I just need to rebuild busybox without support for double instructions.
|
|
|
|
Let see if I can build busybox with double instruction
|
|
|
|
Nope, the u-boot is reporting the d extension is in the isa:
|
|
|
|
> riscv,isa = "rv64imafd";
|
|
|
|
## 2024-07-03<!--{{{-->
|
|
|
|
I cannot switch to `gcc.arch = rv64ima` because rust fails to build.
|
|
|
|
**Assumption**: The extensions F and D work well and don't cause a hang in the<!--{{{-->
|
|
CPU.
|
|
|
|
Let's go back and try to get the initrd shell, so we can systematically hang it
|
|
in the `switch_root`
|
|
<!--}}}-->
|
|
### OBSERVATION: The riscv-timer seems to be causing interrupts with IRQ 5:<!--{{{-->
|
|
|
|
```
|
|
[ 62.439060] irq_handler_entry: irq=5 name=riscv-timer
|
|
[ 62.444980] irq_handler_exit: irq=5 ret=handled
|
|
```
|
|
<!--}}}-->
|
|
### OBSERVATION: Rohan reports the serial startup routine being running *after* <!--{{{-->
|
|
the init begins.
|
|
<!--}}}-->
|
|
### OBSERVATION: Only interrupts in timer, others are zero.<!--{{{-->
|
|
|
|
With:
|
|
|
|
commit 4c656bd8ddd2e41ccaa976ff8d6bd9209175a632 (HEAD -> lagarto-ox)
|
|
Author: Rodrigo Arias Mallo <rodrigo.arias@bsc.es>
|
|
Date: Wed Jul 3 13:21:04 2024 +0200
|
|
|
|
Add busybox patch to see debug lines
|
|
|
|
The switch_root command seems to hang in the execv() syscall.
|
|
|
|
I can see this:
|
|
|
|
~ # cat /proc/interrupts ; sleep 10 ; cat /proc/interrupts
|
|
CPU0
|
|
10: 42926 RISC-V INTC 5 Edge riscv-timer
|
|
IPI0: 0 Rescheduling interrupts
|
|
IPI1: 0 Function call interrupts
|
|
IPI2: 0 CPU stop interrupts
|
|
IPI3: 0 CPU stop (for crash dump) interrupts
|
|
IPI4: 0 IRQ work interrupts
|
|
IPI5: 0 Timer broadcast interrupts
|
|
CPU0
|
|
10: 46023 RISC-V INTC 5 Edge riscv-timer
|
|
IPI0: 0 Rescheduling interrupts
|
|
IPI1: 0 Function call interrupts
|
|
IPI2: 0 CPU stop interrupts
|
|
IPI3: 0 CPU stop (for crash dump) interrupts
|
|
IPI4: 0 IRQ work interrupts
|
|
IPI5: 0 Timer broadcast interrupts
|
|
<!--}}}-->
|
|
### OBSERVATION: There is a timer configured in 0x40170000 but in the device<!--{{{-->
|
|
tree we only have one at `timer@40002000`.
|
|
|
|
#define OX_ALVEO_TIMER_BASE 0x40170000
|
|
#define ADDR_TIME_L 0x0u // 32 lower bits of the time register
|
|
#define ADDR_TIME_H 0x1u // 32 higher bits of the time register
|
|
#define ADDR_TIMECMP_L 0x2u // 32 lower bits of the time comparator
|
|
#define ADDR_TIMECMP_H 0x3u // 32 higher bits of the time comparator
|
|
|
|
https://gitlab.bsc.es/hwdesign/bsc-linux/-/blob/d6d194bd30d9a8fe49c2a278ffb3c3ae7852e75d/bsc_tree/patches/ox_alveo/opensbi/0001-opensbi-ox_alveo-platform.patch#L63
|
|
<!--}}}-->
|
|
### OBSERVATION: When the serial console starts, the speed of the serial port<!--{{{-->
|
|
changes to 9600:
|
|
|
|
[ 6.845400] io scheduler mq-deadline registered
|
|
[ 6.851500] io scheduler kyber registered
|
|
[ 17.644460] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
|
|
[ 18.141160] printk: console [ttyS0] disabled
|
|
[ 18.229480] 40001000.serial: ttyS0 at MMIO 0x40001000 (irq = 11, base_baud = 3125000) is a 16550
|
|
|
|
*** baud: 230400 ***
|
|
|
|
*** baud: 460800 ***
|
|
|
|
*** baud: 500000 ***
|
|
|
|
*** baud: 576000 ***
|
|
|
|
*** baud: 500000 ***
|
|
|
|
*** baud: 460800 ***
|
|
|
|
*** baud: 230400 ***
|
|
|
|
*** baud: 115200 ***
|
|
|
|
*** baud: 57600 ***
|
|
|
|
*** baud: 38400 ***
|
|
|
|
*** baud: 19200 ***
|
|
faaa0?xx
|
|
<ffa
|
|
fx3fÆf
|
|
ff
|
|
~3xf03faaa0?~3<3<`<~<f<`<憆3~fÆf̆x3fff
|
|
|
|
*** baud: 9600 ***
|
|
|
|
*** baud: 19200 ***
|
|
|
|
*** baud: 38400 ***
|
|
xxxxxx<xx<xx<xx<xxxxxxxx
|
|
*** baud: 57600 ***
|
|
|
|
*** baud: 38400 ***
|
|
xxxxxxx<x<xx<xx<xx<xx<x<xxxxxxx<xxx<x<x<xxx<xxxxxx<xx<xxxxx<x<xxxxxxxxxxxxxx<xxxxxxxx<xxxxx<x
|
|
*** baud: 19200 ***
|
|
faaa??~3fx3x3憆`?3f
|
|
ff3f<ffa<xÞ?<?f<x<x<`<`<f<x??`?`<怘
|
|
|
|
*** baud: 9600 ***
|
|
[ 77.929980] stage-1-init: [Thu Jan 1 00:01:17 UTC 1970] + ln -sfn /proc/self/fd/1 /dev/stdout
|
|
[ 79.258380] stage-1-init: [Thu Jan 1 00:01:18 UTC 1970] + ln -sfn /proc/self/fd/2 /dev/stderr
|
|
[ 80.212360] stage-1-init: [Thu Jan 1 00:01:19 UTC 1970] + mkdir -p /etc/systemd
|
|
[ 81.224900] stage-1-init: [Thu Jan 1 00:01:20 UTC 1970] + ln -sfn /nix/store/r4ycv0ymw9wrnalh0sdgkp39nwy3szqz-link-units /etc/systemd/network
|
|
[ 82.270000] stage-1-init: [Thu Jan 1 00:01:21 UTC 1970] + mkdir -p /etc/udev
|
|
[ 83.249640] stage-1-init: [Thu Jan 1 00:01:22 UTC 1970] + ln -sfn /nix/store/lx1q7j61dldj8bv0p33v42q0nldb6sd7-udev-rules /etc/udev/rules.d
|
|
[ 84.304940] stage-1-init: [Thu Jan 1 00:01:23 UTC 1970] + mkdir -p /dev/.mdadm
|
|
[ 85.221060] stage-1-init: [Thu Jan 1 00:01:24 UTC 1970] + systemd-udevd --daemon
|
|
[ 86.157320] stage-1-init: [Thu Jan 1 00:01:25 UTC 1970] Starting systemd-udevd version 254.3
|
|
[ 87.130060] stage-1-init: [Thu Jan 1 00:01:26 UTC 1970] + udevadm trigger '--action=add'
|
|
|
|
*** break sent ***
|
|
[ 158.281900] stage-1-init: [Thu Jan 1 00:02:37 UTC 1970] + udevadm settle
|
|
|
|
*** break sent ***
|
|
|
|
*** break sent ***
|
|
[ 214.524500] stage-1-init: [Thu Jan 1 00:03:33 UTC 1970] + kbd_mode -u -C /dev/console
|
|
[ 215.392960] stage-1-init: [Thu Jan 1 00:03:34 UTC 1970] kbd_mode: KDSKBMODE: Inappropriate ioctl for device
|
|
|
|
That was my mistake as I need to put the baud speed in the ttyS0, like this:
|
|
|
|
console=ttyS0,115200n8
|
|
<!--}}}-->
|
|
### OBSERVATION: Trying to read from the serial console /dev/ttyS0 causes no<!--{{{-->
|
|
more messages in the console (or a hang).
|
|
<!--}}}-->
|
|
### QUESTION: Can we make a heartbeat for the kernel? <!--{{{-->
|
|
The idea is to keep a counter in some memory of the kernel so we can see it from
|
|
the host being moved.
|
|
<!--}}}-->
|
|
### QUESTION: Can we disable the serial driver 8250 from loading?<!--{{{-->
|
|
|
|
initcall_blacklist=<driver_init>
|
|
|
|
I need to know the 8250 init function name:
|
|
|
|
drivers/tty/serial/8250/8250_core.c:static int __init serial8250_init(void)
|
|
|
|
So...
|
|
|
|
initcall_blacklist=serial8250_init
|
|
|
|
Yes, but that doesn't seem to do anything. It is hanging:
|
|
|
|
+ modprobe dm_mod
|
|
[ 627.473580] stage-1-init: [Thu Jan 1 00:10:26 UTC 1970] + echo init /nix/store/v6pi2mqfgshxdsbyxlvpm9nvawxrpijv-nixos-system-nixos-riscv-23.11pre-git/init
|
|
[ 628.249440] stage-1-init: [Thu Jan 1 00:10:27 UTC 1970] + set -- init /nix/store/v6pi2mqfgshxdsbyxlvpm9nvawxrpijv-nixos-system-nixos-riscv-23.11pre-git/init
|
|
[ 629.004840] stage-1-init: [Thu Jan 1 00:10:28 UTC 1970] + stage2Init=/nix/store/v6pi2mqfgshxdsbyxlvpm9nvawxrpijv-nixos-system-nixos-riscv-23.11pre-git/init
|
|
[ 629.733920] stage-1-init: [Thu Jan 1 00:10:29 UTC 1970] + echo /nix/store/snvvqpxmryw1szlllk0bxpm37p8vj8sw-extra-utils/bin/modprobe
|
|
|
|
<!--}}}-->
|
|
### QUESTION: What happens if we remap the interruptions?<!--{{{-->
|
|
|
|
- Move the serial from 0 to 1
|
|
- Move the plic from 3 to 2 and remove 7
|
|
|
|
Now we have one context only:
|
|
|
|
[ 0.000000] riscv-intc: 64 local interrupts mapped
|
|
[ 0.000000] plic: plic@40800000: mapped 3 interrupts with 0 handlers for 1 contexts.
|
|
[ 0.000000] riscv: providing IPIs using SBI IPI extension
|
|
|
|
Rather than two:
|
|
|
|
[ 0.000000] riscv-intc: 64 local interrupts mapped
|
|
[ 0.000000] plic: plic@40800000: mapped 3 interrupts with 0 handlers for 2 contexts.
|
|
[ 0.000000] riscv: providing IPIs using SBI IPI extension
|
|
<!--}}}-->
|
|
### QUESTION: What happens if we block the `sbi_ipi` driver?<!--{{{-->
|
|
|
|
initcall_blacklist=sbi_ipi_init
|
|
|
|
Nothing, it cannot be disabled it seems. I will remove SMP support so it won't
|
|
be compiled in.
|
|
<!--}}}-->
|
|
### OBSERVATION: Searching for 'riscv,plic0' only matches irq-sifive-plic driver.<!--{{{-->
|
|
|
|
hut% rg 'riscv,plic0'
|
|
Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
|
|
72: - const: riscv,plic0
|
|
|
|
drivers/irqchip/irq-sifive-plic.c
|
|
572:IRQCHIP_DECLARE(riscv_plic0, "riscv,plic0", plic_init); /* for legacy systems */
|
|
|
|
So it looks that the only driver that setups the plic is the one used by SiFive.
|
|
Here is the doc: https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf
|
|
<!--}}}-->
|
|
### OBSERVATION: The number of handlers is 0, so there are no interruptions.<!--{{{-->
|
|
|
|
It seems the number next to the phandle of the interrupts-extended attribute in
|
|
the plic follows a different convention of values. Using 9 and 11:
|
|
|
|
plic: plic@40800000: mapped 3 interrupts with 1 handlers for 2 contexts.
|
|
<!--}}}-->
|
|
**Remark**: The key combination to run Magic SysRq using the HVC console is<!--{{{-->
|
|
Ctrl-O and then the SysRq key. It only works it the console is being actively
|
|
polled, otherwise it hangs.<!--}}}-->
|
|
<!--}}}-->
|
|
## 2024-07-04<!--{{{-->
|
|
|
|
### OBSERVATION: I saw they changed this option in Cinco Ranch DTS for the<!--{{{-->
|
|
serial:
|
|
|
|
> reg-shift = <0>; // regs are spaced on 8 bit boundary (modified from Xilinx UART16550 to be ns16550 compatible)
|
|
|
|
Tested booting with debug1 and the ttyS0 console, and it goes extremely slow
|
|
(but still outputs at 115200) and then continues to fail to read keyboard input.
|
|
<!--}}}-->
|
|
### QUESTION: Let's try setting the console in poll mode.<!--{{{-->
|
|
|
|
setenv bootargs "root=/dev/ram0 loglevel=7 debug rw earlycon=uart,io,0x40001000,115200n8 boot.trace console=uart,io,0x40001000,115200n8 debug1 init=/nix/store/wavmnv6wjj8y10ha07wxd5f0sqacivj8-nixos-system-nixos-riscv-23.11pre-git/init"
|
|
|
|
[ 5.909360] io scheduler mq-deadline registered
|
|
[ 5.914900] io scheduler kyber registered
|
|
[ 14.405980] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
|
|
[ 14.856040] 40001000.serial: ttyS0 at MMIO 0x40001000 (irq = 2, base_baud = 3125000) is a 16550
|
|
[ 15.059680] nd_pmem namespace0.0: unable to guarantee persistence of writes
|
|
...
|
|
[ 40.250100] clk: Disabling unused clocks
|
|
[ 40.256220] Warning: unable to open an initial console. <---- SEE THIS
|
|
[ 40.618300] Freeing unused kernel image (initmem) memory: 5592K
|
|
[ 40.728300] Checked W+X mappings: passed, no W+X pages found
|
|
[ 40.735540] Run /init as init process
|
|
[ 40.740080] with arguments:
|
|
[ 40.743920] /init
|
|
[ 40.746660] with environment:
|
|
[ 40.750740] HOME=/
|
|
[ 40.754020] TERM=linux
|
|
[ 46.569960] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100
|
|
[ 46.578100] CPU: 0 PID: 1 Comm: init Not tainted 6.6.1 #1-NixOS
|
|
[ 46.584600] Hardware name: Barcelona Supercomputing Center - Lagarto Ox (NixOS) (DT)
|
|
[ 46.592740] Call Trace:
|
|
[ 46.595640] [<ffffffff80006688>] dump_backtrace+0x38/0x48
|
|
[ 46.601760] [<ffffffff80a96a04>] show_stack+0x50/0x68
|
|
[ 46.607540] [<ffffffff80aa3f74>] dump_stack_lvl+0x3c/0x5c
|
|
[ 46.613660] [<ffffffff80aa3fb4>] dump_stack+0x20/0x30
|
|
[ 46.619400] [<ffffffff80a970dc>] panic+0x158/0x374
|
|
[ 46.624900] [<ffffffff8001c18c>] do_exit+0x9e8/0x9f0
|
|
[ 46.630580] [<ffffffff8001c3b0>] do_group_exit+0x44/0xb0
|
|
[ 46.636600] [<ffffffff8001c454>] __wake_up_parent+0x0/0x40
|
|
[ 46.642780] [<ffffffff80aa4eac>] do_trap_ecall_u+0x14c/0x168
|
|
[ 46.649140] [<ffffffff800035ec>] ret_from_exception+0x0/0xac
|
|
[ 46.655500] Kernel Offset: 0x0 from 0xffffffff80000000
|
|
[ 46.661160] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100 ]---
|
|
|
|
Also found: `no_console_suspend`
|
|
<!--}}}-->
|
|
### OBSERVATION: There are messages of address space being assigned to<!--{{{-->
|
|
registers:
|
|
|
|
Slave segment '/MEEP_uart_0/S_AXI/Reg' is being assigned into address space '/m_axi_uart0' at <0x0000_0000 [ 4K ]>.
|
|
Slave segment '/MEEP_uart_1/S_AXI/Reg' is being assigned into address space '/m_axi_uart1' at <0x0000_0000 [ 4K ]>.
|
|
<!--}}}-->
|
|
### QUESTION: What happens if I enable `CONFIG_CONSOLE_POLL`?<!--{{{-->
|
|
|
|
With `console=ttyS0,115200n8 debug1` I cannot type.
|
|
<!--}}}-->
|
|
### OBSERVATION: I can dump iomem memory with the tool devmem:<!--{{{-->
|
|
|
|
But it seems I cannot dump the registers of the serial io mapped region:
|
|
|
|
~ # cat /proc/iomem
|
|
40001000-400010ff : serial
|
|
60000000-7fffffff : Reserved
|
|
80000000-ffefffff : System RAM
|
|
80201000-81fa0b87 : Kernel image
|
|
80201000-80cb177f : Kernel code
|
|
81400000-819fffff : Kernel rodata
|
|
81c00000-81f18747 : Kernel data
|
|
81f19000-81fa0b87 : Kernel bss
|
|
100000000-1bfffffff : namespace0.0
|
|
|
|
~ # devmem 0x40001000
|
|
devmem: mmap: Operation not permitted
|
|
|
|
It looks like the following options may be required to be disabled to allow
|
|
user-space tools read those regions.
|
|
|
|
~ # zcat /proc/config.gz | grep CONFIG_STRICT_DEVMEM
|
|
CONFIG_STRICT_DEVMEM=y
|
|
~ # zcat /proc/config.gz | grep CONFIG_IO_STRICT_DEVMEM
|
|
CONFIG_IO_STRICT_DEVMEM=y
|
|
|
|
Let's try disabling `CONFIG_STRICT_DEVMEM` and see if we can read the serial
|
|
registers.
|
|
|
|
It works!
|
|
|
|
~ # cat /proc/iomem
|
|
40001000-400010ff : serial
|
|
60000000-7fffffff : Reserved
|
|
80000000-ffefffff : System RAM
|
|
80201000-81fa0b87 : Kernel image
|
|
80201000-80cb159f : Kernel code
|
|
81400000-819fffff : Kernel rodata
|
|
81c00000-81f18707 : Kernel data
|
|
81f19000-81fa0b87 : Kernel bss
|
|
100000000-1bfffffff : namespace0.0
|
|
~ # devmem 0x40001000
|
|
0x0000006E
|
|
~ # devmem 0x40001000
|
|
0x0000006C
|
|
~ # devmem 0x40001000
|
|
0x00000072
|
|
~ # devmem 0x40001000
|
|
0x0000000D
|
|
<!--}}}-->
|
|
### OBSERVATION: The interrupt register of the serial console is 0x0:<!--{{{-->
|
|
|
|
Assuming the console registers follow AXI UART 16550, here is the IER:
|
|
|
|
> 0x1004 IER R/W Interrupt Enable Register
|
|
|
|
Which is zero:
|
|
|
|
~ # devmem 0x40001004
|
|
0x00000000
|
|
|
|
The line control register is 0x3:
|
|
|
|
~ # devmem 0x4000100C
|
|
0x00000003
|
|
<!--}}}-->
|
|
### QUESTION: Can I write to some memory address and see the result from the host?<!--{{{-->
|
|
|
|
For that I would need to find some address that is mapped to the DMA or to the
|
|
pmem. Xavi recommended `0x6000_0000` as it is uncached.
|
|
|
|
It seems to have some content already:
|
|
|
|
~ # devmem 0x60000000
|
|
0x00000093
|
|
~ # devmem 0x60000004
|
|
0x00000113
|
|
~ # devmem 0x60000008
|
|
0x00000193
|
|
~ # devmem 0x60000010
|
|
0x00000293
|
|
~ # devmem 0x60000014
|
|
0x00000313
|
|
~ # devmem 0x60000018
|
|
0x00000393
|
|
|
|
Writing test seems to work:
|
|
|
|
~ # devmem 0x60000000 32 0x11223344
|
|
~ # devmem 0x60000000
|
|
0x11223344
|
|
|
|
So, technically we should be using the `/dev/qdma34000-MM-0` device, as we
|
|
already use the other one to map the memory.
|
|
|
|
[bsc015557@fpgan02 nixos]$ for i in {0..16}; do addr=$(($i * 0x10000000)); \
|
|
printf "addr 0x%09x: " $addr; dd if=/dev/qdma34000-MM-0 count=16 bs=1 skip=$addr 2>/dev/null | xxd; done
|
|
addr 0x000000000: 00000000: 4444 4444 4444 4444 4444 4444 4444 4444 DDDDDDDDDDDDDDDD
|
|
addr 0x010000000: 00000000: 0000 0000 0000 0000 0000 0000 0000 0000 ................
|
|
addr 0x020000000: 00000000: 3333 3333 3333 3333 3333 3333 3333 3333 3333333333333333
|
|
addr 0x030000000: 00000000: cccc cccc cccc cccc cccc cccc cccc cccc ................
|
|
addr 0x040000000: 00000000: cccc cccc cccc cccc cccc cccc cccc cccc ................
|
|
addr 0x050000000: 00000000: 0000 0000 0000 0000 0000 0000 0000 0000 ................
|
|
addr 0x060000000: 00000000: 0000 0000 0000 0000 0000 0000 0000 0000 ................
|
|
addr 0x070000000: 00000000: 0000 0000 0000 0000 0000 0000 0000 0000 ................
|
|
addr 0x080000000: 00000000: 3333 3333 3333 3333 3333 3333 3333 3333 3333333333333333
|
|
addr 0x090000000: 00000000: 0000 0000 0000 0000 0000 0000 0000 0000 ................
|
|
addr 0x0a0000000: 00000000: 0000 0000 0000 0000 0000 0000 0000 0000 ................
|
|
addr 0x0b0000000: 00000000: 2f2f 2f2f 2f2f 2f2f 2f2f 2f2f 2f2f 2f2f ////////////////
|
|
addr 0x0c0000000: 00000000: 6e6e 6e6e 6e6e 6e6e 6e6e 6e6e 6e6e 6e6e nnnnnnnnnnnnnnnn
|
|
addr 0x0d0000000: 00000000: 2020 2020 2020 2020 2020 2020 2020 2020
|
|
addr 0x0e0000000: 00000000: 6c6c 6c6c 6c6c 6c6c 6c6c 6c6c 6c6c 6c6c llllllllllllllll
|
|
addr 0x0f0000000: 00000000: 6767 6767 6767 6767 6767 6767 6767 6767 gggggggggggggggg
|
|
addr 0x100000000: 00000000: 2424 2424 2424 2424 2424 2424 2424 2424 $$$$$$$$$$$$$$$$
|
|
|
|
[bsc015557@fpgan02 nixos]$ for i in {0..16}; do addr=$(($i * 0x10000000)); \
|
|
printf "addr 0x%09x: " $addr; dd if=/dev/qdma34000-MM-1 count=16 bs=1 skip=$addr 2>/dev/null | xxd; done
|
|
addr 0x000000000: 00000000: 4444 4444 4444 4444 4444 4444 4444 4444 DDDDDDDDDDDDDDDD
|
|
addr 0x010000000: 00000000: 0000 0000 0000 0000 0000 0000 0000 0000 ................
|
|
addr 0x020000000: 00000000: 3333 3333 3333 3333 3333 3333 3333 3333 3333333333333333
|
|
addr 0x030000000: 00000000: cccc cccc cccc cccc cccc cccc cccc cccc ................
|
|
addr 0x040000000: 00000000: cccc cccc cccc cccc cccc cccc cccc cccc ................
|
|
addr 0x050000000: 00000000: 0000 0000 0000 0000 0000 0000 0000 0000 ................
|
|
addr 0x060000000: 00000000: 0000 0000 0000 0000 0000 0000 0000 0000 ................
|
|
addr 0x070000000: 00000000: 0000 0000 0000 0000 0000 0000 0000 0000 ................
|
|
addr 0x080000000: 00000000: 3333 3333 3333 3333 3333 3333 3333 3333 3333333333333333
|
|
addr 0x090000000: 00000000: 0000 0000 0000 0000 0000 0000 0000 0000 ................
|
|
addr 0x0a0000000: 00000000: 0000 0000 0000 0000 0000 0000 0000 0000 ................
|
|
addr 0x0b0000000: 00000000: 2f2f 2f2f 2f2f 2f2f 2f2f 2f2f 2f2f 2f2f ////////////////
|
|
addr 0x0c0000000: 00000000: 6e6e 6e6e 6e6e 6e6e 6e6e 6e6e 6e6e 6e6e nnnnnnnnnnnnnnnn
|
|
addr 0x0d0000000: 00000000: 2020 2020 2020 2020 2020 2020 2020 2020
|
|
addr 0x0e0000000: 00000000: 6c6c 6c6c 6c6c 6c6c 6c6c 6c6c 6c6c 6c6c llllllllllllllll
|
|
addr 0x0f0000000: 00000000: 6767 6767 6767 6767 6767 6767 6767 6767 gggggggggggggggg
|
|
addr 0x100000000: 00000000: 2424 2424 2424 2424 2424 2424 2424 2424 $$$$$$$$$$$$$$$$
|
|
|
|
None of the two queues seem to have the value 0x11223344 at any multiple of `0x1000_0000`.
|
|
|
|
Let's verify first that this method works. The kernel is loaded here:
|
|
|
|
[bsc015557@fpgan02 nixos]$ printf '0x%x\n' $FPGACTL_KERNEL_ADDR
|
|
0x24000000
|
|
|
|
So we should see the same values as the kernel file:
|
|
|
|
[bsc015557@fpgan02 nixos]$ dd if=kernel.bin count=16 bs=1 2>/dev/null| xxd
|
|
00000000: 6f00 400d 0000 0000 0000 2000 0000 0000 o.@....... .....
|
|
|
|
But we don't see the same:
|
|
|
|
[bsc015557@fpgan02 nixos]$ dd if=/dev/qdma34000-MM-1 count=16 bs=1 skip=$FPGACTL_KERNEL_ADDR 2>/dev/null | xxd
|
|
00000000: 9797 9797 9797 9797 9797 9797 9797 9797 ................
|
|
[bsc015557@fpgan02 nixos]$ dd if=/dev/qdma34000-MM-0 count=16 bs=1 skip=$FPGACTL_KERNEL_ADDR 2>/dev/null | xxd
|
|
00000000: 9797 9797 9797 9797 9797 9797 9797 9797 ................
|
|
|
|
<!--}}}-->
|
|
### QUESTION: Missing forward M to S via Mideleg?<!--{{{-->
|
|
|
|
Can it be happening that he MEDELEG is not forwarding the interruptions to the
|
|
Supervisor (kernel)?
|
|
|
|
Boot HART MIDELEG : 0x0000000000000222
|
|
Boot HART MEDELEG : 0x000000000000b109
|
|
|
|
<!--}}}-->
|
|
### QUESTION: Can we add a timer to the PLIC to test the interrupts?<!--{{{-->
|
|
|
|
<!--}}}-->
|
|
### OBSERVATION: Here is the PLIC register dump:<!--{{{-->
|
|
|
|
~ # for i in `seq 0 16`; do addr=$((0x40600000 + $i)); printf '%08x: ' $addr; devmem $addr; done
|
|
40600000: 0x00010002
|
|
40600001: 0x09000000
|
|
40600002: 0x00090000
|
|
40600003: 0x00000900
|
|
40600004: 0x00010009
|
|
40600005: 0x00000000
|
|
40600006: 0x00000000
|
|
40600007: 0x00000000
|
|
40600008: 0x00000000
|
|
40600009: 0x00000000
|
|
4060000a: 0x00000000
|
|
4060000b: 0x00000000
|
|
4060000c: 0x00000000
|
|
4060000d: 0x00000000
|
|
4060000e: 0x00000000
|
|
4060000f: 0x00000000
|
|
40600010: 0x00000000
|
|
<!--}}}-->
|
|
### QUESTION: Can we boot with the new bitstream that includes the second UART?<!--{{{-->
|
|
|
|
The interruptions are enabled for the UART 1, not the default UART 0.
|
|
|
|
<!--}}}-->
|
|
### OBSERVATION: I'm using 0x100 not 0x1000 in the serial range:<!--{{{-->
|
|
|
|
reg = <0x0 0x40003000 0x0 0x100>;
|
|
reg = <0x0 0x40003000 0x0 0x1000>;
|
|
|
|
Can this produce any problem?
|
|
|
|
It doesn't seem to change anything, still unable to send any bytes.
|
|
|
|
<!--}}}-->
|
|
### QUESTION: Can we use virtio to mount a FS in the DMA shared memory?<!--{{{-->
|
|
|
|
<!--}}}-->
|
|
<!--}}}-->
|
|
## 2024-07-05<!--{{{-->
|
|
|
|
### OBSERVATION: The kernel continues working when the console hangs.<!--{{{-->
|
|
|
|
Switching to 0x100000000 as 0x60000000 shows:
|
|
|
|
~ # devmem 0x6000000
|
|
0xBADCAB1E
|
|
|
|
With the following loop:
|
|
|
|
~ # i=0; while [ 1 ]; do let i=$i+1; devmem 0x100000000 32 $i; done &
|
|
~ # cat /dev/ttyS0
|
|
(hangs)
|
|
|
|
Shows the kernel works:
|
|
|
|
[bsc015557@fpgan02 nixos]$ while [ 1 ]; do xxd -s $((0x100000000 - 0x60000000)) -l 4 /dev/qdma34000-MM-1; sleep 0.2; done
|
|
...
|
|
a0000000: 6400 0000 d...
|
|
a0000000: 6500 0000 e...
|
|
a0000000: 6600 0000 f...
|
|
a0000000: 6700 0000 g...
|
|
a0000000: 6800 0000 h...
|
|
a0000000: 6900 0000 i...
|
|
|
|
<!--}}}-->
|
|
### QUESTION: Can we reproduce it with `switch_root`?<!--{{{-->
|
|
|
|
For that I would have to ensure the process continues to operate, even if we
|
|
exit the console. Maybe I can make a double fork?
|
|
|
|
I cannot use `0x1000_0000` as that is where the pmem will be. But I can try to
|
|
use an address in the end, as we are not filling the whole space.
|
|
|
|
[0x1_0000_0000, 0x1_c000_0000) -> PMEM (3072 MiB)
|
|
|
|
Maybe `0x1_bfff_0000`? Let's try first from the initrd shell.
|
|
|
|
i=0; while [ 1 ]; do let i=$i+1; devmem 0x1bfff0000 32 $i; done &
|
|
|
|
Then
|
|
|
|
while [ 1 ]; do xxd -s $((0x1bfff0000 - 0x60000000)) -l 4 /dev/qdma34000-MM-1; sleep 0.2; done
|
|
|
|
Yes, it seems to be working. Let's load the rootfs too.
|
|
|
|
I added a loop in the stage1 script.<!--}}}-->
|
|
### QUESTION: Can we see any clock in memory?<!--{{{-->
|
|
|
|
This will allow us to check if the AXI still works.
|
|
<!--}}}-->
|
|
### OBSERVATION: The kernel stops updating the counter in the mount phase.<!--{{{-->
|
|
|
|
Managed to reach the mount and hang there:
|
|
|
|
[ 337.504740] stage-1-init: [Thu Jan 1 00:05:36 UTC 1970] + '[' -d
|
|
/dev/disk/by-label/NIXOS_SD ]
|
|
[ 338.284560] stage-1-init: [Thu Jan 1 00:05:37 UTC 1970] + mkdir -m 0755 -p
|
|
/mnt-root/
|
|
[ 339.017420] stage-1-init: [Thu Jan 1 00:05:38 UTC 1970] + local 'n=0'
|
|
[ 339.752560] stage-1-init: [Thu Jan 1 00:05:39 UTC 1970] + true
|
|
[ 340.488960] stage-1-init: [Thu Jan 1 00:05:39 UTC 1970] + mount /mnt-root/
|
|
|
|
After almost 6 minutes, with 571 beats:
|
|
|
|
$ xxd -s 5905514496 -l 4 /dev/qdma34000-MM-1
|
|
5fff0000: 3b02 0000 ;...
|
|
|
|
It looks like the kernel is the one getting stuck *or* at least is unable to
|
|
propagate the heartbeat changes to the host. It would be nice to monitor a
|
|
hardware clock from the DMA region too, so we can discard problems in the AXI.
|
|
|
|
<!--}}}-->
|
|
### OBSERVATION: There is an ioctl failed for /dev/console<!--{{{-->
|
|
|
|
[ 177.009540] stage-1-init: [Thu Jan 1 00:02:56 UTC 1970] + udevadm settle
|
|
+ kbd_mode -u -C /dev/console
|
|
kbd_mode: KDSKBMODE: Inappropriate ioctl for device
|
|
+ printf '\033%%G'
|
|
+ loadkmap
|
|
[ 266.301040] stage-1-init: [Thu Jan 1 00:04:25 UTC 1970] + kbd_mode -u -C /dev/console
|
|
|
|
<!--}}}-->
|
|
### ASSUMPTION: The kernel hangs.<!--{{{-->
|
|
|
|
If the kernel hangs, there must be an instruction or sequence of instructions
|
|
that causes it. First I need to determine what is being executed by the kernel.
|
|
For that I could use `ftrace` to see which program is running at the time it
|
|
hangs.
|
|
|
|
trace_options=sym-addr trace_event=initcall:* tp_printk trace_buf_size=1M
|
|
|
|
(prev_comm != 2 && next_comm != 2)
|
|
|
|
So, we can just enable the `tp_printk` but not the tracer. Then in the initrd
|
|
script, I enable the function tracer and the filter.
|
|
|
|
<!--}}}-->
|
|
### OBSERVATION: It takes a long time to init the pty:<!--{{{-->
|
|
|
|
Interesting timing:
|
|
|
|
[ 12.612620] initcall_start: func=pty_init+0x0/0x3f4
|
|
[ 20.962640] initcall_finish: func=pty_init+0x0/0x3f4 ret=0
|
|
|
|
<!--}}}-->
|
|
### OBSERVATION: The kcompactd0 daemon is using the CPU:<!--{{{-->
|
|
|
|
[ 290.394920] sched_switch: prev_comm=devmem prev_pid=129 prev_prio=120 prev_state=R ==> next_comm=init next_pid=69 next_prio=120
|
|
[ 290.408160] sched_switch: prev_comm=init prev_pid=69 prev_prio=120 prev_state=R ==> next_comm=tee next_pid=68 next_prio=120
|
|
[ 290.420720] sched_switch: prev_comm=tee prev_pid=68 prev_prio=120 prev_state=R+ ==> next_comm=ksoftirqd/0 next_pid=12 next_prio=120
|
|
[ 290.433960] sched_switch: prev_comm=ksoftirqd/0 prev_pid=12 prev_prio=120 prev_state=R ==> next_comm=init next_pid=1 next_prio=120
|
|
[ 290.447100] sched_switch: prev_comm=init prev_pid=1 prev_prio=120 prev_state=R ==> next_comm=kcompactd0 next_pid=22 next_prio=120
|
|
[ 290.460180] sched_switch: prev_comm=kcompactd0 prev_pid=22 prev_prio=120 prev_state=R ==> next_comm=khvcd next_pid=31 next_prio=120
|
|
[ 290.473400] sched_switch: prev_comm=khvcd prev_pid=31 prev_prio=120 prev_state=R ==> next_comm=kworker/u2:2 next_pid=19 next_prio=120
|
|
[ 290.486960] sched_switch: prev_comm=kworker/u2:2 prev_pid=19 prev_prio=120 prev_state=R ==> next_comm=khungtaskd next_pid=18 next_prio=120
|
|
[ 290.500800] sched_switch: prev_comm=khungtaskd prev_pid=18 prev_prio=120 prev_state=R ==> next_comm=kworker/0:1 next_pid=13 next_prio=120
|
|
[ 290.514560] sched_switch: prev_comm=kworker/0:1 prev_pid=13 prev_prio=120 prev_state=R ==> next_comm=tee next_pid=68 next_prio=120
|
|
[ 290.527720] sched_switch: prev_comm=tee prev_pid=68 prev_prio=120 prev_state=R+ ==> next_comm=init next_pid=69 next_prio=120
|
|
[ 290.540360] sched_switch: prev_comm=init prev_pid=69 prev_prio=120 prev_state=R ==> next_comm=devmem next_pid=129 next_prio=120
|
|
[ 290.553280] sched_switch: prev_comm=devmem prev_pid=129 prev_prio=120 prev_state=R ==> next_comm=ksoftirqd/0 next_pid=12 next_prio=120
|
|
[ 290.566780] sched_switch: prev_comm=ksoftirqd/0 prev_pid=12 prev_prio=120 prev_state=R ==> next_comm=kcompactd0 next_pid=22 next_prio=120
|
|
[ 290.580500] sched_switch: prev_comm=kcompactd0 prev_pid=22 prev_prio=120 prev_state=R ==> next_comm=init next_pid=1 next_prio=120
|
|
[ 290.593740] sched_switch: prev_comm=init prev_pid=1 prev_prio=120 prev_state=R ==> next_comm=khvcd next_pid=31 next_prio=120
|
|
[ 290.606340] sched_switch: prev_comm=khvcd prev_pid=31 prev_prio=120 prev_state=R ==> next_comm=kworker/u2:2 next_pid=19 next_prio=120
|
|
[ 290.619780] sched_switch: prev_comm=kworker/u2:2 prev_pid=19 prev_prio=120 prev_state=R ==> next_comm=khungtaskd next_pid=18 next_prio=120
|
|
[ 290.633620] sched_switch: prev_comm=khungtaskd prev_pid=18 prev_prio=120 prev_state=R ==> next_comm=tee next_pid=68 next_prio=120
|
|
[ 290.646700] sched_switch: prev_comm=tee prev_pid=68 prev_prio=120 prev_state=R+ ==> next_comm=init next_pid=69 next_prio=120
|
|
[ 290.659320] sched_switch: prev_comm=init prev_pid=69 prev_prio=120 prev_state=R ==> next_comm=kworker/0:1 next_pid=13 next_prio=120
|
|
[ 290.672560] sched_switch: prev_comm=kworker/0:1 prev_pid=13 prev_prio=120 prev_state=R ==> next_comm=devmem next_pid=129 next_prio=120
|
|
[ 290.686080] sched_switch: prev_comm=devmem prev_pid=129 prev_prio=120 prev_state=R ==> next_comm=ksoftirqd/0 next_pid=12 next_prio=120
|
|
[ 290.699720] sched_switch: prev_comm=ksoftirqd/0 prev_pid=12 prev_prio=120 prev_state=R ==> next_comm=init next_pid=1 next_prio=120
|
|
[ 290.712880] sched_switch: prev_comm=init prev_pid=1 prev_prio=120 prev_state=R ==> next_comm=khvcd next_pid=31 next_prio=120
|
|
[ 290.725500] sched_switch: prev_comm=khvcd prev_pid=31 prev_prio=120 prev_state=R ==> next_comm=kcompactd0 next_pid=22 next_prio=120
|
|
|
|
<!--}}}-->
|
|
### QUESTION: Can we reproduce this hang with 6.9.7?<!--{{{-->
|
|
|
|
Disabling clang as it is failing to build:
|
|
|
|
hut% nix develop '.#lagarto-ox'
|
|
error: builder for '/nix/store/x1nfa792pv28px70kvfakm3aalcfbdyw-clang-epi-479518d.drv' failed with exit code 2;
|
|
last 10 log lines:
|
|
> | ^~~~~~~~~~~~~~~
|
|
> 2 errors generated.
|
|
> make[2]: *** [lib/Support/CMakeFiles/LLVMSupport.dir/build.make:1868: lib/Support/CMakeFiles/LLVMSupport.dir/Signals.cpp.o] Error 1
|
|
> make[2]: *** Waiting for unfinished jobs....
|
|
> [ 9%] Built target obj.clang-tblgen
|
|
> 1 warning generated.
|
|
> make[1]: *** [CMakeFiles/Makefile2:9468: lib/Support/CMakeFiles/LLVMSupport.dir/all] Error 2
|
|
> make[1]: *** Waiting for unfinished jobs....
|
|
> [ 9%] Built target obj.llvm-tblgen
|
|
> make: *** [Makefile:156: all] Error 2
|
|
For full logs, run 'nix log /nix/store/x1nfa792pv28px70kvfakm3aalcfbdyw-clang-epi-479518d.drv'.
|
|
error: 1 dependencies of derivation '/nix/store/m54sxxyi3cg062djrcddcawp10z7r49l-riscv64-unknown-linux-gnu-clang-epi-wrapper-479518d.drv' failed to build
|
|
error: 1 dependencies of derivation '/nix/store/yl26dbqqj0snl807c0wjabg4dpbq5gvp-stdenv-linux.drv' failed to build
|
|
error: 1 dependencies of derivation '/nix/store/h6180fcl30kqy3apaqjsbkkik2p1spmr-rvb-riscv64-unknown-linux-gnu-da202d6.drv' failed to build
|
|
error: 1 dependencies of derivation '/nix/store/b13shgqj7128rdsdzzp4qicqbzl0wnfw-system-path.drv' failed to build
|
|
error: 1 dependencies of derivation '/nix/store/6qghlihqcyg6155309ldj5xm9m0v835i-nixos-system-nixos-riscv-24.11pre-git.drv' failed to build
|
|
error: 1 dependencies of derivation '/nix/store/l2x18cih29r1kn6vi8imwhkyk98yhw4i-nix-shell-riscv64-unknown-linux-gnu-env.drv' failed to build
|
|
|
|
<!--}}}-->
|
|
### QUESTION: Missing cache information may affect?<!--{{{-->
|
|
|
|
Other CPUs report the cache details in the DT. For example this one
|
|
https://github.com/torvalds/linux/blob/master/arch/riscv/boot/dts/sifive/fu540-c000.dtsi#L45
|
|
|
|
cpu1: cpu@1 {
|
|
compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
|
|
d-cache-block-size = <64>;
|
|
d-cache-sets = <64>;
|
|
d-cache-size = <32768>;
|
|
d-tlb-sets = <1>;
|
|
d-tlb-size = <32>;
|
|
device_type = "cpu";
|
|
i-cache-block-size = <64>;
|
|
i-cache-sets = <64>;
|
|
i-cache-size = <32768>;
|
|
i-tlb-sets = <1>;
|
|
i-tlb-size = <32>;
|
|
mmu-type = "riscv,sv39";
|
|
reg = <1>;
|
|
riscv,isa = "rv64imafdc";
|
|
riscv,isa-base = "rv64i";
|
|
riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr",
|
|
"zifencei", "zihpm";
|
|
tlb-split;
|
|
next-level-cache = <&l2cache>;
|
|
cpu1_intc: interrupt-controller {
|
|
#interrupt-cells = <1>;
|
|
compatible = "riscv,cpu-intc";
|
|
interrupt-controller;
|
|
};
|
|
};
|
|
|
|
We may want to add it to our DT to be sure that it has no effect.<!--}}}-->
|
|
### OBSERVATION: Arrived to stage 2!<!--{{{-->
|
|
|
|
+ kill -9 74
|
|
+ readlink /proc/75/exe
|
|
[ 374.961120] stage-1-init: [Thu Jan 1 00:06:14 UTC 1970] + test 0 -ge 8
|
|
+ '[' 75 -eq 1 ]
|
|
+ kill -9 75
|
|
+ readlink /proc/102/exe
|
|
+ '[' 102 -eq 1 ]
|
|
+ kill -9 102
|
|
+ readlink /proc/137/exe
|
|
+ continue
|
|
+ readlink /proc/674/exe
|
|
+ continue
|
|
+ readlink /proc/675/exe
|
|
+ continue
|
|
+ test -n
|
|
+ echo /sbin/modprobe
|
|
+ '[' '!' -e /mnt-root//nix/store/xwqaqpc66ijvay9wxnm5nqmi30f2lp1i-nixos-system-nixos-riscv-24.11pre-git/init ]
|
|
+ mkdir -m 0755 -p /mnt-root/proc /mnt-root/sys /mnt-root/dev /mnt-root/run
|
|
+ mount --move /proc /mnt-root/proc
|
|
+ mount --move /sys /mnt-root/sys
|
|
+ mount --move /dev /mnt-root/dev
|
|
+ mount --move /run /mnt-root/run
|
|
+ type -P switch_root
|
|
+ exec env -i /nix/store/988axh0bq3wqp90gms4b4a0hkfwvkd3i-extra-utils/bin/switch_root /mnt-root /nix/store/xwqaqpc66ijvay9wxnm5nqmi30f2lp1i-nixos-system-nixos-riscv-24.11pre-git/init
|
|
|
|
<<< NixOS Stage 2 >>>
|
|
|
|
[ 384.203680] EXT4-fs (pmem0p2): re-mounted 44444444-4444-4444-8888-888888888888 r/w. Quota mode: none.
|
|
[ 384.287600] booting system configuration /nix/store/xwqaqpc66ijvay9wxnm5nqmi30f2lp1i-nixos-system-nixos-riscv-24.11pre-git
|
|
running activation script...
|
|
[ 388.163860] stage-2-init: running activation script...
|
|
[ 391.643500] random: perl: uninitialized urandom read (4 bytes read)
|
|
[ 391.884800] random: perl: uninitialized urandom read (4 bytes read)
|
|
[ 425.302000] random: perl: uninitialized urandom read (4 bytes read)
|
|
|
|
But then it hangs.
|
|
<!--}}}-->
|
|
<!--}}}-->
|
|
## 2024-07-08
|
|
|
|
### QUESTION: Who sets the plic interrupts?<!--{{{-->
|
|
|
|
Shouldn't OpenSBI read the DT and do some configuration in the PLIC while in
|
|
machine mode?
|
|
|
|
<!--}}}-->
|
|
### OBSERVATION: Semi-stack trace from CincoRanch<!--{{{-->
|
|
|
|
hvc_remove?
|
|
console_unlock <-- only called from hvc_remove()
|
|
prb_read_valid
|
|
desc_read_finalized_seq
|
|
__memcpy (multiple times)
|
|
get_data
|
|
do_trap_break
|
|
report_bug
|
|
is_valid_bugaddr
|
|
copy_from_kernel_nofault
|
|
copy_from_kernel_nofault_allowed
|
|
find_bug
|
|
_printk
|
|
vprintk
|
|
vprintk_default
|
|
vprintk_emit
|
|
vprintk_store
|
|
sched_clock
|
|
vsnprintf
|
|
format_decode
|
|
__memcpy
|
|
printk_parse_prefix
|
|
prb_reserve
|
|
do_page_fault
|
|
fixup_exception
|
|
search_exception_tables
|
|
search_extable
|
|
cmp_ex_search (multiple times)
|
|
search_module_extables
|
|
__module_address
|
|
no_context.part.0
|
|
die_kernel_fault <-- last frame(?)
|
|
|
|
<!--}}}-->
|
|
### QUESTION: Can we place a trace point in `hvc_remove`?<!--{{{-->
|
|
|
|
If we are getting stuck in the same place, we should be able to see the
|
|
backtrace (assuming the console still works) just before we try to remove the
|
|
console device.
|
|
|
|
Placed, but still unable to see anything in any hang. Here is a hang in the
|
|
Stage 2:
|
|
|
|
<<< NixOS Stage 2 >>>
|
|
|
|
[ 404.158340] EXT4-fs (pmem0p2): re-mounted 44444444-4444-4444-8888-888888888888 r/w. Quota mode: none.
|
|
[ 404.242500] booting system configuration /nix/store/0za1vqh5alk7mxqs59qxx8izmwmf21w6-nixos-system-nixos-riscv-24.11pre-git
|
|
running activation script...
|
|
[ 408.148380] stage-2-init: running activation script...
|
|
[ 411.612240] random: perl: uninitialized urandom read (4 bytes read)
|
|
[ 411.866440] random: perl: uninitialized urandom read (4 bytes read)
|
|
[ 447.588880] random: perl: uninitialized urandom read (4 bytes read)
|
|
|
|
Still, it may be hang in a similar way, causing a loop of page faults just
|
|
while trying to printk to the console, which would explain why we don't see
|
|
anything and why the heartbeat stops.
|
|
|
|
<!--}}}-->
|
|
|
|
Fran has created another bitstream with two consoles enabled
|
|
(`ox_u55c_a234c132.bit`), let see if I manage to boot with it.
|
|
|
|
First I will need to enable the consoles on the DTS.
|
|
|
|
It doesn't seem to produce any output in the UART. I cannot see OpenSBI while
|
|
loading it on each baud rate:
|
|
|
|
Type [C-a] [C-h] to see available commands
|
|
Terminal ready
|
|
|
|
*** baud: 57600 ***
|
|
|
|
*** baud: 38400 ***
|
|
|
|
*** baud: 19200 ***
|
|
|
|
*** baud: 9600 ***
|
|
|
|
[...]
|
|
|
|
*** baud: 230400 ***
|
|
|
|
*** baud: 460800 ***
|
|
|
|
Let's keep the bitstream files in a repository, so I can carefully track them
|
|
with git too.
|
|
|
|
### OBSERVATION: The new bitstream requires a bootrom to start
|
|
|
|
I added it to the bitstream repository, as it is a binary blob too. Now I need
|
|
to update the load addresses:
|
|
|
|
https://gitlab.bsc.es/hwdesign/fpga/integration-lab/fpga-tools/-/blob/6a63bcea6d1d59df3c7d62311aa4935efd54d3a3/boot_riscv/boot_sa.sh#L36-40
|
|
|
|
Continues to hang just after those perl messages:
|
|
|
|
+ mount --move /proc /mnt-root/proc
|
|
+ mount --move /sys /mnt-root/sys
|
|
+ mount --move /dev /mnt-root/dev
|
|
+ mount --move /run /mnt-root/run
|
|
+ type -P switch_root
|
|
+ exec env -i /nix/store/988axh0bq3wqp90gms4b4a0hkfwvkd3i-extra-utils/bin/switch_root /mnt-root /nix/store/0za1vqh5alk7mxqs59qxx8izmwmf21w6-nixos-system-nixos-riscv-24.11pre-git/init
|
|
|
|
<<< NixOS Stage 2 >>>
|
|
|
|
[ 541.559320] EXT4-fs (pmem0p2): re-mounted 44444444-4444-4444-8888-888888888888 r/w. Quota mode: none.
|
|
[ 541.641280] booting system configuration /nix/store/0za1vqh5alk7mxqs59qxx8izmwmf21w6-nixos-system-nixos-riscv-24.11pre-git
|
|
running activation script...
|
|
[ 545.569700] stage-2-init: running activation script...
|
|
[ 549.019380] random: perl: uninitialized urandom read (4 bytes read)
|
|
[ 549.274940] random: perl: uninitialized urandom read (4 bytes read)
|
|
|
|
### QUESTION: What happens if we disable `CONFIG_BUG`
|
|
|
|
May be a long shot, but if we are experiencing the same page fault loop as in
|
|
cincoranch we may as well try.
|
|
|
|
## 2024-07-09
|
|
|
|
### QUESTION: Maybe we can try without out-of-order?
|
|
|
|
I made a small tool in C to view and change the CSR register that controls the
|
|
in-order/out-of-order. Maybe we can try with the "in-order" setting.
|
|
|
|
We arrive to execute `systemd`:
|
|
|
|
|
|
Starting interactive shell...
|
|
+ setsid /nix/store/xm3mpj9aldz5r4s5yb7p08jdjv98hj4w-extra-utils/bin/ash -c 'exec /nix/store/xm3mpj9aldz5r4s5yb7p08jdjv98hj4w-extra-utils/bin/ash < /dev/hvc0 >/dev/hvc0 2>/dev/hvc0'
|
|
[ 90.077300] stage-1-init: [Thu Jan 1 00:01:27 UTC 1970] + '[' -n 1 -a i '=' f ]
|
|
[ 90.639760] stage-1-init: [Thu Jan 1 00:01:28 UTC 1970] + '[' -n 1 -a i '=' i ]
|
|
~ # [ 90.967260] stage-1-init: [Thu Jan 1 00:01:28 UTC 1970] + echo 'Starting interactive shell...'
|
|
[ 91.234980] stage-1-init: [Thu Jan 1 00:01:28 UTC 1970] Starting interactive shell...
|
|
[ 91.569580] stage-1-init: [Thu Jan 1 00:01:29 UTC 1970] + setsid /nix/store/xm3mpj9aldz5r4s5yb7p08jdjv98hj4w-extra-utils/bin/ash -c 'exec /nix/store/xm3mpj9aldz5r4s5yb7p08jdjv98hj4w-extr
|
|
a-utils/bin/ash < /dev/hvc0 >/dev/hvc0 2>/dev/hvc0'
|
|
which csrtool
|
|
/nix/store/xm3mpj9aldz5r4s5yb7p08jdjv98hj4w-extra-utils/bin/csrtool
|
|
~ # csrtool
|
|
CSR 0x801 = 0u
|
|
~ # csrtool o
|
|
unknown 'o', use: mem-in-order, all-in-order or all-out-of-order
|
|
~ # csrtool all-in-order
|
|
CSR 0x801 = 7u
|
|
~ # csrtool
|
|
CSR 0x801 = 7u
|
|
~ #
|
|
+ IFS='='
|
|
+ echo init /nix/store/xmagm60y90pfh3yvqanvmaswa0m3cb0a-nixos-system-nixos-riscv-24.11pre-git/init
|
|
+ set -- init /nix/store/xmagm60y90pfh3yvqanvmaswa0m3cb0a-nixos-system-nixos-riscv-24.11pre-git/init
|
|
+ stage2Init=/nix/store/xmagm60y90pfh3yvqanvmaswa0m3cb0a-nixos-system-nixos-riscv-24.11pre-git/init
|
|
+ echo /nix/store/xm3mpj9aldz5r4s5yb7p08jdjv98hj4w-extra-utils/bin/modprobe
|
|
+ basename dm_mod
|
|
[...]
|
|
+ echo /sbin/modprobe
|
|
+ '[' '!' -e /mnt-root//nix/store/xmagm60y90pfh3yvqanvmaswa0m3cb0a-nixos-system-nixos-riscv-24.11pre-git/init ]
|
|
+ mkdir -m 0755 -p /mnt-root/proc /mnt-root/sys /mnt-root/dev /mnt-root/run
|
|
+ mount --move /proc /mnt-root/proc
|
|
+ mount --move /sys /mnt-root/sys
|
|
+ mount --move /dev /mnt-root/dev
|
|
+ mount --move /run /mnt-root/run
|
|
+ type -P switch_root
|
|
+ exec env -i /nix/store/xm3mpj9aldz5r4s5yb7p08jdjv98hj4w-extra-utils/bin/switch_root /mnt-root /nix/store/xmagm60y90pfh3yvqanvmaswa0m3cb0a-nixos-system-nixos-riscv-24.11pre-git/init
|
|
|
|
<<< NixOS Stage 2 >>>
|
|
|
|
[ 967.703320] EXT4-fs (pmem0p2): re-mounted 44444444-4444-4444-8888-888888888888 r/w. Quota mode: none.
|
|
[ 967.928020] booting system configuration /nix/store/xmagm60y90pfh3yvqanvmaswa0m3cb0a-nixos-system-nixos-riscv-24.11pre-git
|
|
running activation script...
|
|
[ 977.608980] stage-2-init: running activation script...
|
|
bbbbbbbbbbbbbbbbbbbbsetting up /etc...
|
|
[ 1084.376420] stage-2-init: setting up /etc...
|
|
starting systemd...
|
|
|
|
Not sure if it is a good reproducer, as it is taking around 15 minutes to hang
|
|
in a very large piece of software, while when we have the out-of-order enabled,
|
|
we can hang in half of the time in some script.
|
|
|
|
Either way, we need to see a backtrace of where it is hanging to understand why
|
|
it does. We may also enable a stage-2 heartbeat to be sure that it is hanging
|
|
the kernel and not only the console.
|
|
|
|
Another idea is to arrive at a proper bash shell, where we can have debugging
|
|
tools, which may allow us to go slowly until we catch the bug.
|
|
|
|
### OBSERVATION: Setting memory in-order only causes a hang
|
|
|
|
Tested with:
|
|
|
|
$ csrtool mem-in-order
|
|
|
|
And it hangs just after exiting the tool.
|
|
|
|
### QUESTION: Can we see the printk buffer from the host?
|
|
|
|
If the problem that we are observing is somehow related to the recursive
|
|
segfault of the kernel in Cincoranch, we may be able to see the printk ring
|
|
buffer by directly poking at the memory from the host.
|
|
|
|
### QUESTION: Can we crash the CPU by exercising the memory?
|
|
|
|
I did a small tool `memtool` that performs allocations and
|
|
deallocations.
|
|
|
|
Good news, the tool has hang the console (potentially the kernel too).
|
|
|
|
~ # which memtool
|
|
/nix/store/amj11aclwx62d4mnvkhdgj19kq5gjb9y-extra-utils/bin/memtool
|
|
~ # memtool
|
|
iter 0, nblocks 1, nbytes 0.1M (A)
|
|
iter 1, nblocks 2, nbytes 3.5M (A)
|
|
iter 2, nblocks 3, nbytes 3.8M (A)
|
|
iter 3, nblocks 4, nbytes 5.7M (A)
|
|
iter 4, nblocks 5, nbytes 6.8M (A)
|
|
iter 5, nblocks 6, nbytes 10.7M (A)
|
|
iter 6, nblocks 5, nbytes 10.6M (D)
|
|
iter 7, nblocks 6, nbytes 13.9M (A)
|
|
iter 8, nblocks 7, nbytes 16.4M (A)
|
|
iter 9, nblocks 8, nbytes 19.8M (A)
|
|
iter 10, nblocks 9, nbytes 21.2M (A)
|
|
iter 11, nblocks 10, nbytes 24.3M (A)
|
|
iter 12, nblocks 11, nbytes 27.4M (A)
|
|
iter 13, nblocks 12, nbytes 28.3M (A)
|
|
iter 14, nblocks 13, nbytes 31.6M (A)
|
|
iter 15, nblocks 12, nbytes 28.2M (D)
|
|
iter 16, nblocks 13, nbytes 29.2M (A)
|
|
iter 17, nblocks 14, nbytes 30.8M (A)
|
|
iter 18, nblocks 15, nbytes 32.6M (A)
|
|
iter 19, nblocks 16, nbytes 32.8M (A)
|
|
iter 20, nblocks 17, nbytes 36.8M (A)
|
|
iter 21, nblocks 18, nbytes 39.6M (A)
|
|
iter 22, nblocks 19, nbytes 41.1M (A)
|
|
iter 23, nblocks 20, nbytes 44.1M (A)
|
|
iter 24, nblocks 21, nbytes 46.9M (A)
|
|
iter 25, nblocks 20, nbytes 46.5M (D)
|
|
iter 26, nblocks 21, nbytes 50.2M (A)
|
|
iter 27, nblocks 22, nbytes 53.8M (A)
|
|
|
|
Let's see if we can reproduce it again in the same position.
|
|
|
|
~ # memtool
|
|
iter 0, nblocks 1, nbytes 0.1M (A)
|
|
iter 1, nblocks 2, nbytes 3.5M (A)
|
|
iter 2, nblocks 3, nbytes 3.8M (A)
|
|
iter 3, nblocks 4, nbytes 5.7M (A)
|
|
iter 4, nblocks 5, nbytes 6.8M (A)
|
|
iter 5, nblocks 6, nbytes 10.7M (A)
|
|
iter 6, nblocks 5, nbytes 10.6M (D)
|
|
iter 7, nblocks 6, nbytes 13.9M (A)
|
|
iter 8, nblocks 7, nbytes 16.4M (A)
|
|
iter 9, nblocks 8, nbytes 19.8M (A)
|
|
iter 10, nblocks 9, nbytes 21.2M (A)
|
|
iter 11, nblocks 10, nbytes 24.3M (A)
|
|
iter 12, nblocks 11, nbytes 27.4M (A)
|
|
iter 13, nblocks 12, nbytes 28.3M (A)
|
|
iter 14, nblocks 13, nbytes 31.6M (A)
|
|
iter 15, nblocks 12, nbytes 28.2M (D)
|
|
iter 16, nblocks 13, nbytes 29.2M (A)
|
|
iter 17, nblocks 14, nbytes 30.8M (A)
|
|
iter 18, nblocks 15, nbytes 32.6M (A)
|
|
iter 19, nblocks 16, nbytes 32.8M (A)
|
|
iter 20, nblocks 17, nbytes 36.8M (A)
|
|
iter 21, nblocks 18, nbytes 39.6M (A)
|
|
iter 22, nblocks 19, nbytes 41.1M (A)
|
|
iter 23, nblocks 20, nbytes 44.1M (A)
|
|
iter 24, nblocks 21, nbytes 46.9M (A)
|
|
iter 25, nblocks 20, nbytes 46.5M (D)
|
|
iter 26, nblocks 21, nbytes 50.2M (A)
|
|
iter 27, nblocks 22, nbytes 53.8M (A)
|
|
|
|
Let's make it automatic, so we only need to boot and confirm that it
|
|
hangs. Just in case we can make it not hang by a miracle.
|
|
|
|
|
|
With blocks of up to 64K we hang in the ~50 M region.
|
|
|
|
iter=2042 nblocks=1577 allocated=50458K (A)
|
|
iter=2043 nblocks=1578 allocated=50489K (A)
|
|
iter=2044 nblocks=1579 allocated=50550K (A)
|
|
iter=2045 nblocks=1580 allocated=50605K (A)
|
|
|
|
With blocks of maxsize=512K it also hangs around ~57M.
|
|
|
|
memtool v1.0.0 maxsize=512K
|
|
iter=0 nblocks=1 allocated=88K (A)
|
|
iter=1 nblocks=2 allocated=464K (A)
|
|
...
|
|
iter=275 nblocks=218 allocated=56674K (A)
|
|
iter=276 nblocks=219 allocated=56787K (A)
|
|
iter=277 nblocks=220 allocated=57252K (A)
|
|
iter=278 nblocks=221 allocated=57493K (A)
|
|
iter=279 nblocks=222 allocated=57581K (A)
|
|
iter=280 nblocks=221 allocated=57416K (D)
|
|
iter=281 nblocks=222 allocated=57521K (A)
|
|
|
|
Maybe there is a problem in the memory segment? Can we reduce it to 1 GiB only
|
|
and see if it has any effect?
|
|
|
|
iter=289 nblocks=228 allocated=58636K (A)
|
|
iter=290 nblocks=227 allocated=58412K (D)
|
|
iter=291 nblocks=228 allocated=58480K (A)
|
|
iter=292 nblocks=229 allocated=58599K (A)
|
|
|
|
Has changed, but not much.
|
|
|
|
aaaiter=291 nblocks=228 allocated=58480K (A)
|
|
allocating...
|
|
filling...
|
|
aaaaaaaaiter=292 nblocks=229 allocated=58599K (A)
|
|
allocating...
|
|
aafilling...
|
|
|
|
It seems to be getting stuck in the filling phase. Can we trace it down with
|
|
ftrace? It should be generating page faults.
|
|
|
|
### 2024-07-10
|
|
|
|
So, if we manage to crash in the filling phase, we can further pinpoint the
|
|
issue and remove any effect of `malloc()`. It would be only related to a page
|
|
fault and the MMU at this point.
|
|
|
|
Let's make a much simpler program that only allocates once a buffer of N bytes
|
|
and then begins filling it, printing the progress in the output.
|
|
|
|
### OBSERVATION: Writing to a vector also stops around 58 MiB
|
|
|
|
+ memtool fill 536870912
|
|
memtool v0.0.1 - Rodrigo Arias Mallo <rodrigo.arias@bsc.es>
|
|
mode fill: nbytes=512M, n=134217728
|
|
written=0K, addr=0x3f9b800020 OK
|
|
written=4096K, addr=0x3f9bc00020 OK
|
|
written=8192K, addr=0x3f9c000020 OK
|
|
written=12288K, addr=0x3f9c400020 OK
|
|
written=16384K, addr=0x3f9c800020 OK
|
|
written=20480K, addr=0x3f9cc00020 OK
|
|
written=24576K, addr=0x3f9d000020 OK
|
|
written=28672K, addr=0x3f9d400020 OK
|
|
written=32768K, addr=0x3f9d800020 OK
|
|
written=36864K, addr=0x3f9dc00020 OK
|
|
written=40960K, addr=0x3f9e000020 OK
|
|
written=45056K, addr=0x3f9e400020 OK
|
|
written=49152K, addr=0x3f9e800020 OK
|
|
written=53248K, addr=0x3f9ec00020 OK
|
|
written=57344K, addr=0x3f9f000020 OK
|
|
|
|
Let's see if we can trace the page fault.
|
|
|
|
In today's meeting, Jonnatan suggests test the memtool program with all-in-order
|
|
configuration. I should also try to reproduce this hang with a "production"
|
|
bitstream (from master).
|
|
|
|
Also, Xavi reports that the memtool chain test continued to run until the memory
|
|
was exhausted using an old bistream.
|
|
|
|
Let's do the quick CSR test first, and then we go back to the ftrace testing,
|
|
which will take more time.
|
|
|
|
Here are the commands I was testing, but nothing comes out of the console, even
|
|
after booting with the `tp_printk trace_buf_size=1M` boot options:
|
|
|
|
mkdir -p /sys/kernel/debug/
|
|
mount -t debugfs none /sys/kernel/debug/
|
|
td=/sys/kernel/debug/tracing
|
|
echo nop > $td/current_tracer
|
|
echo 100 > $td/max_graph_depth
|
|
echo do_page_fault > $td/set_graph_function
|
|
echo function_graph > $td/current_tracer
|
|
|
|
### OBSERVATION: Using all-in-order causes the hang in the same place
|
|
|
|
After setting the CSR 0x801 register to 0x7, the all-in-order configuration, the
|
|
memtool fill tests continues to hang in the same position:
|
|
|
|
+ csrtool all-in-order
|
|
CSR 0x801 = 7u
|
|
+ memtool fill 536870912
|
|
memtool v0.0.1 - Rodrigo Arias Mallo <rodrigo.arias@bsc.es>
|
|
mode fill: nbytes=512M, n=134217728
|
|
written=0K, addr=0x3f8d600020 OK
|
|
written=4096K, addr=0x3f8da00020 OK
|
|
written=8192K, addr=0x3f8de00020 OK
|
|
written=12288K, addr=0x3f8e200020 OK
|
|
written=16384K, addr=0x3f8e600020 OK
|
|
written=20480K, addr=0x3f8ea00020 OK
|
|
written=24576K, addr=0x3f8ee00020 OK
|
|
written=28672K, addr=0x3f8f200020 OK
|
|
written=32768K, addr=0x3f8f600020 OK
|
|
written=36864K, addr=0x3f8fa00020 OK
|
|
written=40960K, addr=0x3f8fe00020 OK
|
|
written=45056K, addr=0x3f90200020 OK
|
|
written=49152K, addr=0x3f90600020 OK
|
|
written=53248K, addr=0x3f90a00020 OK
|
|
written=57344K, addr=0x3f90e00020 OK
|
|
|
|
It doesn't seem to have any observable effect with this test, other than going
|
|
more slow.
|
|
|
|
Interesting [article](https://wiki.osdev.org/RISC-V_Bare_Bones) on how to write
|
|
a simple bootrom that outputs some ASCII text into the console.
|
|
|
|
Regarding the `do_page_fault` filter, it seems that is no available. I need to
|
|
pick one from `available_filter_functions` instead. Let's try `handle_page_fault`.
|
|
|
|
It still doesn't seem to appear in the console. It is visible with a SysRq
|
|
request Ctrl+O then 'z'.
|
|
|
|
Maybe I can try disabling the huge pages, just to discard that it may be
|
|
related to it: `CONFIG_HUGETLBFS`.
|
|
|
|
Same hang with huge pages disabled, but a bit further ~70 MB.
|
|
|
|
### OBSERVATION: The Linux memtest fails in the first round
|
|
|
|
[ 0.000000] Linux version 6.9.7 (nixbld@localhost) (riscv64-unknown-linux-gnu-gcc (GCC) 13.3.0, GNU ld (GNU Binutils) 2.41) #1-NixOS Thu Jun 27 11:52:32 UTC 2024
|
|
[ 0.000000] Machine model: Barcelona Supercomputing Center - Lagarto Ox (NixOS)
|
|
[ 0.000000] SBI specification v2.0 detected
|
|
[ 0.000000] SBI implementation ID=0x1 Version=0x10004
|
|
[ 0.000000] SBI TIME extension detected
|
|
[ 0.000000] SBI IPI extension detected
|
|
[ 0.000000] SBI RFENCE extension detected
|
|
[ 0.000000] SBI DBCN extension detected
|
|
[ 0.000000] earlycon: sbi0 at I/O port 0x0 (options '')
|
|
[ 0.000000] printk: legacy bootconsole [sbi0] enabled
|
|
[ 0.000000] Reserved memory: created DMA memory pool at 0x0000000060000000, size 256 MiB
|
|
[ 0.000000] OF: reserved mem: initialized node dma_pool@60000000, compatible id shared-dma-pool
|
|
[ 0.000000] OF: reserved mem: 0x0000000060000000..0x000000006fffffff (262144 KiB) map non-reusable dma_pool@60000000
|
|
[ 0.000000] Reserved memory: created DMA memory pool at 0x0000000070000000, size 256 MiB
|
|
[ 0.000000] OF: reserved mem: initialized node dma_pool@70000000, compatible id shared-dma-pool
|
|
[ 0.000000] OF: reserved mem: 0x0000000070000000..0x000000007fffffff (262144 KiB) map non-reusable dma_pool@70000000
|
|
[ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000 on node -1
|
|
[ 0.000000] early_memtest: # of tests: 3
|
|
[ 0.000000] 0x0000000080000000 - 0x0000000080013000 pattern 5555555555555555
|
|
|
|
This is not suggesting that the problem is not in the virtual memory, but with
|
|
the actual physical memory.
|
|
|
|
I will try a similar test with uboot with the `mtest` command, but requires
|
|
enabling it first.
|
|
|
|
### OBSERVATION: Memory in the 0xb0000000..0xc0000000 range is bad
|
|
|
|
Reproduced from U-Boot:
|
|
|
|
=> mtest 0x80000000 0x90000000 0 2
|
|
Testing 80000000 ... 90000000:
|
|
Pattern FFFFFFFFFFFFFFFF Writing... Reading...Iteration: 2
|
|
Tested 2 iteration(s) with 0 errors.
|
|
=> mtest 0x90000000 0xa0000000 0 2
|
|
Testing 90000000 ... a0000000:
|
|
Pattern FFFFFFFFFFFFFFFF Writing... Reading...Iteration: 2
|
|
Tested 2 iteration(s) with 0 errors.
|
|
=> mtest 0xa0000000 0xb0000000 0 2
|
|
Testing a0000000 ... b0000000:
|
|
Pattern FFFFFFFFFFFFFFFF Writing... Reading...Iteration: 2
|
|
Tested 2 iteration(s) with 0 errors.
|
|
=> mtest 0xb0000000 0xc0000000 0 2
|
|
Testing b0000000 ... c0000000:
|
|
Pattern 0000000000000000 Writing...
|
|
|
|
Let's see if we can fix the boot hang by reducing the memory enough to avoid
|
|
this bad region.
|
|
|
|
## 2024-07-11
|
|
|
|
### OBSERVATION: U-Boot mtest hangs in the last 256 MiB
|
|
|
|
After reducing the size of the RAM segment, I run again the mtest, but this time
|
|
it fails in the last 256 MiB block.
|
|
|
|
I assume that U-Boot moves itself to the last part of the memory, and them mtest
|
|
overwrites the U-Boot code, causing a hang.
|
|
|
|
So, I simply changed the FDT from U-Boot to skip the first 2M:
|
|
|
|
fdt set /memory@80000000 reg <0x0 0x80200000 0x0 0x40000000>
|
|
|
|
And then I enabled the memtest in the kernel boot parameters:
|
|
|
|
=> fdt set /memory@80000000 reg <0x0 0x80200000 0x0 0x30000000>
|
|
=> setenv bootargs "root=/dev/ram0 loglevel=7 debug rw earlycon=sbi console=hvc0 boot.trace boot.tracedebug init=/nix/store/zxbq93zfg8ijkyq5cq5sb4742rczqfck-nixos-system-nixos-riscv-24.11pre-git/init"
|
|
=> setenv ramdisk_size 12611657
|
|
=> setenv bootargs "root=/dev/ram0 loglevel=7 debug rw earlycon=sbi console=hvc0 boot.trace boot.tracedebug memtest=3 init=/nix/store/zxbq93zfg8ijkyq5cq5sb4742rczqfck-nixos-system-nixos-risc=> 4.11pre-git/init"
|
|
=> booti ${kernel_addr_r} ${ramdisk_addr_r}:${ramdisk_size} ${fdtcontroladdr}
|
|
Moving Image from 0x84000000 to 0x80200000, end=8303c4d0
|
|
## Flattened Device Tree blob at 80013000
|
|
Booting using the fdt blob at 0x80013000
|
|
Working FDT set to 80013000
|
|
Using Device Tree in place at 0000000080013000, end 000000008001696f
|
|
Working FDT set to 80013000
|
|
|
|
Starting kernel ...
|
|
|
|
[ 0.000000] Linux version 6.9.7 (nixbld@localhost) (riscv64-unknown-linux-gnu-gcc (GCC) 13.3.0, GNU ld (GNU Binutils) 2.41) #1-NixOS Thu Jun 27 11:52:32 UTC 2024
|
|
[ 0.000000] Machine model: Barcelona Supercomputing Center - Lagarto Ox (NixOS)
|
|
[ 0.000000] SBI specification v2.0 detected
|
|
[ 0.000000] SBI implementation ID=0x1 Version=0x10004
|
|
[ 0.000000] SBI TIME extension detected
|
|
[ 0.000000] SBI IPI extension detected
|
|
[ 0.000000] SBI RFENCE extension detected
|
|
[ 0.000000] SBI DBCN extension detected
|
|
[ 0.000000] earlycon: sbi0 at I/O port 0x0 (options '')
|
|
[ 0.000000] printk: legacy bootconsole [sbi0] enabled
|
|
[ 0.000000] Reserved memory: created DMA memory pool at 0x0000000060000000, size 256 MiB
|
|
[ 0.000000] OF: reserved mem: initialized node dma_pool@60000000, compatible id shared-dma-pool
|
|
[ 0.000000] OF: reserved mem: 0x0000000060000000..0x000000006fffffff (262144 KiB) map non-reusable dma_pool@60000000
|
|
[ 0.000000] Reserved memory: created DMA memory pool at 0x0000000070000000, size 256 MiB
|
|
[ 0.000000] OF: reserved mem: initialized node dma_pool@70000000, compatible id shared-dma-pool
|
|
[ 0.000000] OF: reserved mem: 0x0000000070000000..0x000000007fffffff (262144 KiB) map non-reusable dma_pool@70000000
|
|
[ 0.000000] cma: Reserved 16 MiB at 0x00000000af000000 on node -1
|
|
[ 0.000000] early_memtest: # of tests: 3
|
|
[ 0.000000] 0x0000000083200000 - 0x000000008c300000 pattern 5555555555555555
|
|
[ 0.000000] 0x000000009e912000 - 0x00000000aeff9308 pattern 5555555555555555
|
|
[ 0.000000] 0x00000000aeff9337 - 0x00000000aeff9338 pattern 5555555555555555
|
|
[ 0.000000] 0x00000000aeff9367 - 0x00000000aeff9368 pattern 5555555555555555
|
|
[ 0.000000] 0x00000000aeffcffc - 0x00000000aeffd000 pattern 5555555555555555
|
|
[ 0.000000] 0x0000000083200000 - 0x000000008c300000 pattern ffffffffffffffff
|
|
[ 0.000000] 0x000000009e912000 - 0x00000000aeff9308 pattern ffffffffffffffff
|
|
[ 0.000000] 0x00000000aeff9337 - 0x00000000aeff9338 pattern ffffffffffffffff
|
|
[ 0.000000] 0x00000000aeff9367 - 0x00000000aeff9368 pattern ffffffffffffffff
|
|
[ 0.000000] 0x00000000aeffcffc - 0x00000000aeffd000 pattern ffffffffffffffff
|
|
[ 0.000000] 0x0000000083200000 - 0x000000008c300000 pattern 0000000000000000
|
|
[ 0.000000] 0x000000009e912000 - 0x00000000aeff9308 pattern 0000000000000000
|
|
[ 0.000000] 0x00000000aeff9337 - 0x00000000aeff9338 pattern 0000000000000000
|
|
[ 0.000000] 0x00000000aeff9367 - 0x00000000aeff9368 pattern 0000000000000000
|
|
[ 0.000000] 0x00000000aeffcffc - 0x00000000aeffd000 pattern 0000000000000000
|
|
[ 0.000000] Zone ranges:
|
|
[ 0.000000] DMA32 [mem 0x0000000080200000-0x00000000b01fffff]
|
|
[ 0.000000] Normal empty
|
|
[ 0.000000] Movable zone start for each node
|
|
[ 0.000000] Early memory node ranges
|
|
[ 0.000000] node 0: [mem 0x0000000080200000-0x00000000b01fffff]
|
|
|
|
That seems to pass the memtest fine, however the boot process hangs in different
|
|
stages.
|
|
|
|
### OBSERVATION: Cannot open /dev/ttyS0
|
|
|
|
~ # setserial -g /dev/ttyS1 -a
|
|
/dev/ttyS1, Line 1, UART: 16550, Port: 0x0000, IRQ: 1
|
|
Baud_base: 3125000, close_delay: 50, divisor: 0
|
|
closing_wait: 3000
|
|
Flags: spd_normal
|
|
|
|
~ # setserial -g /dev/ttyS0 -a
|
|
(hangs)
|
|
|
|
This page seems to have good resources on the serial console:
|
|
|
|
https://tldp.org/HOWTO/Serial-HOWTO-16.html
|
|
|
|
It seems that there are some differences in the way the serial port is handled
|
|
regarding 16550 and 16550A.
|
|
|
|
I can write to the UART console from U-Boot by directly writing in the
|
|
0x40001000 address (A = 0x41):
|
|
|
|
=> help mw
|
|
mw - memory write (fill)
|
|
|
|
Usage:
|
|
mw [.b, .w, .l, .q] address value [count]
|
|
=> mw 0x40001000 0x41
|
|
A=> mw 0x40001000 0x42
|
|
B=> mw 0x40001000 0x43
|
|
C=>
|
|
|
|
### OBSERVATION: I can type with the ttyS0 8250 driver
|
|
|
|
Tried to boot too, but hangs:
|
|
|
|
=> fdt set /memory@80000000 reg <0x0 0x80200000 0x0 0x30000000>
|
|
=> setenv bootargs "root=/dev/ram0 loglevel=7 debug rw earlycon=sbi console=ttyS0,115200n8 boot.trace boot.tracedebug init=/nix/store/zxbq93zfg8ijkyq5cq5sb4742rczqfck-nixos-
|
|
system-nixos-riscv-24.11pre-git/init"
|
|
=> setenv ramdisk_size 12611657
|
|
=> booti ${kernel_addr_r} ${ramdisk_addr_r}:${ramdisk_size} ${fdtcontroladdr}
|
|
...
|
|
[ 30.740740] riscv-plic 40800000.plic: mapped 3 interrupts with 1 handlers for 2 contexts.
|
|
[ 40.048300] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
|
|
[ 40.420000] of_serial 40001000.serial: error -ENXIO: IRQ index 0 not found
|
|
[ 40.496720] printk: legacy console [ttyS0] disabled
|
|
[ 40.558860] 40001000.serial: ttyS0 at MMIO 0x40001000 (irq = 0, base_baud = 3125000) is a 16550
|
|
[ 40.583940] printk: legacy console [ttyS0] enabled
|
|
[ 40.583940] printk: legacy console [ttyS0] enabled
|
|
[ 40.595760] printk: legacy bootconsole [sbi0] disabled
|
|
[ 40.595760] printk: legacy bootconsole [sbi0] disabled
|
|
[ 40.820380] 40003000.serial: ttyS1 at MMIO 0x40003000 (irq = 1, base_baud = 3125000) is a 16550
|
|
|
|
...
|
|
|
|
<<< NixOS Stage 2 >>>
|
|
|
|
[ 394.678980] EXT4-fs (pmem0p2): re-mounted 44444444-4444-4444-8888-888888888888 r/w. Quota mode: none.
|
|
[ 394.764620] booting system configuration /nix/store/zxbq93zfg8ijkyq5cq5sb4742rczqfck-nixos-system-nixos-riscv-24.11pre-git
|
|
runnin[ 398.543300] stage-2-init: running activation script...
|
|
g activation script...
|
|
|
|
So, if we observe a hang when writing to a bad memory segment, can there be a
|
|
problem in the place we are placing the pmem? Maybe we can test it with u-boot
|
|
first.
|
|
|
|
Another note, the serial device 16550 doesn't seem to use a FIFO, but the
|
|
16550A does.
|
|
|
|
We may want to switch to the A variant, as it seems to be supported by U-boot and
|
|
the kernel:
|
|
|
|
https://github.com/u-boot/u-boot/blob/master/drivers/serial/ns16550.c#L607-L619
|
|
https://github.com/torvalds/linux/blob/v6.9/drivers/tty/serial/8250/8250_of.c#L285
|
|
|
|
And defines a FIFO size of 16 bytes:
|
|
|
|
https://github.com/torvalds/linux/blob/v6.9/drivers/tty/serial/8250/8250_port.c#L74-L81
|
|
|
|
Still, we would have to wait for a bitstream that can forward the interrupts
|
|
from the host to the serial console to test it.
|
|
|
|
### OBSERVATION: The memory for the pmem seems to be ok
|
|
|
|
=> mtest 0x100000000 0x1c0000000 0 2
|
|
Testing 100000000 ... 1c0000000:
|
|
Pattern FFFFFFFFFFFFFFFF Writing... Reading...Iteration: 2
|
|
Tested 2 iteration(s) with 0 errors.
|
|
|
|
It may be worth enabling huge pages again, as there didn't seem to have any
|
|
effect.
|
|
|
|
### OBSERVATION: There are extra regions mapped by OpenSBI
|
|
|
|
In the OpenSBI 1.2 test from buildroot:
|
|
|
|
Domain0 Region00 : 0x0000000080000000-0x000000008003ffff ()
|
|
Domain0 Region01 : 0x0000000000000000-0xffffffffffffffff (R,W,X)
|
|
Domain0 Next Address : 0x0000000080200000
|
|
Domain0 Next Arg1 : 0x0000000080010000
|
|
|
|
But with OpenSBI 1.4:
|
|
|
|
Domain0 Region00 : 0x0000000040000000-0x0000000040000fff M: (I,R,W) S/U: (R,W)
|
|
Domain0 Region01 : 0x0000000080020000-0x000000008002ffff M: (R,W) S/U: ()
|
|
Domain0 Region02 : 0x0000000080000000-0x000000008001ffff M: (R,X) S/U: ()
|
|
Domain0 Region03 : 0x0000000000000000-0xffffffffffffffff M: () S/U: (R,W,X)
|
|
Domain0 Next Address : 0x0000000080200000
|
|
Domain0 Next Arg1 : 0x0000000080013000
|
|
|
|
## 2024-07-12
|
|
|
|
I find it strange that if we are writing to the 0x80000000 region from the
|
|
kernel and OpenSBI has mapped a segment for Machine mode only, there is no error
|
|
message about it in the console.
|
|
|
|
Let's update to OpenSBI 1.5 for now, and see if we get any more information.
|
|
|
|
It seems to be booting fine.
|
|
|
|
So, I observed the `udevadm settle` to take a lot of time, maybe I can get some
|
|
clues by enabling the debug mode.
|
|
|
|
If a trap is being issued, we may be able to modify OpenSBI to print some
|
|
information to the serial console so we can understand what is going on.
|
|
|
|
In the meanwhile, let's try a simple test. We can enable debug output of systemd
|
|
with the following boot options:
|
|
|
|
systemd.log_level=debug systemd.log_target=console
|
|
|
|
We will also need to run `csrtool all-in-order` to arrive to systemd.
|
|
|
|
### OBSERVATION: Hangs in `switch_root` again.
|
|
|
|
Technically, we cannot discard the hypothesis than only the console has crashed,
|
|
as when we switch to the stage 2 we don't have the heartbeat counter. We may as
|
|
well run it again before we arrive to systemd just to verify that userland
|
|
crashed.
|
|
|
|
On the other hand, I don't understand why we hang in such a way when we try to
|
|
write to the `0x8000_0000` area from the kernel memtest. I've been reading the
|
|
OpenSBI source code and they seem to have a trap handler that can emit verbose
|
|
information to the console when a problem with the trap is detected. I would
|
|
expect to see some error being dumped to the console in that case.
|
|
|
|
From the OpenSBI information, this line:
|
|
|
|
Domain0 Region02 : 0x0000000080000000-0x000000008001ffff M: (R,X) S/U: ()
|
|
|
|
Suggests that it registers a region with no write permission at `0x8000_0000`,
|
|
so it should fail right away from the kernel side. However, this is not reported
|
|
anywhere in the console.
|
|
|
|
As we have an easy way to trigger this situation, maybe we can use it as a test
|
|
to modify OpenSBI to report that problem to the console and verify that it is
|
|
working. With that information, we could rule out that a similar problem is
|
|
happening when we try to run systemd. Maybe we could also try to debug other
|
|
traps.
|
|
|
|
Another observation is that the memtest lines we see on the console are printed
|
|
*before* the actual test begins:
|
|
|
|
pr_info(" %pa - %pa pattern %016llx\n",
|
|
&this_start, &this_end, cpu_to_be64(pattern));
|
|
memtest(pattern, this_start, this_end - this_start);
|
|
|
|
So when this line is shown:
|
|
|
|
[ 0.000000] early_memtest: # of tests: 3
|
|
[ 0.000000] 0x0000000080000000 - 0x0000000080013000 pattern 5555555555555555
|
|
|
|
We an infer that the problem is located in that region, which agrees with the
|
|
hypothesis that is related with the OpenSBI regions.
|
|
|
|
This is the output I get with OpenSBI 1.5:
|
|
|
|
OpenSBI v1.5
|
|
____ _____ ____ _____
|
|
/ __ \ / ____| _ \_ _|
|
|
| | | |_ __ ___ _ __ | (___ | |_) || |
|
|
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
|
|
| |__| | |_) | __/ | | |____) | |_) || |_
|
|
\____/| .__/ \___|_| |_|_____/|____/_____|
|
|
| |
|
|
|_|
|
|
|
|
Platform Name : ox (Rodrigo NixOS version)
|
|
Platform Features : medeleg
|
|
Platform HART Count : 1
|
|
Platform IPI Device : ---
|
|
Platform Timer Device : axi_timer @ 50000000Hz
|
|
Platform Console Device : uart8250
|
|
Platform HSM Device : ---
|
|
Platform PMU Device : ---
|
|
Platform Reboot Device : ---
|
|
Platform Shutdown Device : ---
|
|
Platform Suspend Device : ---
|
|
Platform CPPC Device : ---
|
|
Firmware Base : 0x80000000
|
|
Firmware Size : 310 KB
|
|
Firmware RW Offset : 0x40000
|
|
Firmware RW Size : 54 KB
|
|
Firmware Heap Offset : 0x45000
|
|
Firmware Heap Size : 34 KB (total), 2 KB (reserved), 11 KB (used), 20 KB (free)
|
|
Firmware Scratch Size : 4096 B (total), 368 B (used), 3728 B (free)
|
|
Runtime SBI Version : 2.0
|
|
|
|
Domain0 Name : root
|
|
Domain0 Boot HART : 0
|
|
Domain0 HARTs : 0*
|
|
Domain0 Region00 : 0x0000000040000000-0x0000000040000fff M: (I,R,W) S/U: (R,W)
|
|
Domain0 Region01 : 0x0000000080040000-0x000000008004ffff M: (R,W) S/U: ()
|
|
Domain0 Region02 : 0x0000000080000000-0x000000008003ffff M: (R,X) S/U: ()
|
|
Domain0 Region03 : 0x0000000000000000-0xffffffffffffffff M: () S/U: (R,W,X)
|
|
Domain0 Next Address : 0x0000000080200000
|
|
Domain0 Next Arg1 : 0x0000000080017000
|
|
Domain0 Next Mode : S-mode
|
|
Domain0 SysReset : yes
|
|
Domain0 SysSuspend : yes
|
|
|
|
Boot HART ID : 0
|
|
Boot HART Domain : root
|
|
Boot HART Priv Version : v1.10
|
|
Boot HART Base ISA : rv64imafdc
|
|
Boot HART ISA Extensions : zicntr,zihpm,sdtrig
|
|
Boot HART PMP Count : 0
|
|
Boot HART PMP Granularity : 0 bits
|
|
Boot HART PMP Address Bits: 0
|
|
Boot HART MHPM Info : 29 (0xfffffff8)
|
|
Boot HART Debug Triggers : 0 triggers
|
|
Boot HART MIDELEG : 0x0000000000000222
|
|
Boot HART MEDELEG : 0x000000000000b109
|
|
|
|
<debug_uart>
|
|
Core: 12 devices, 8 uclasses, devicetree: board
|
|
Loading Environment from nowhere... OK
|
|
In: serial,usbkbd
|
|
Out: serial,vidconsole
|
|
Err: serial,vidconsole
|
|
No working controllers found
|
|
Net: No ethernet found.
|
|
Working FDT set to 80017000
|
|
Hit any key to stop autoboot: 0
|
|
|
|
Device 0: unknown device
|
|
|
|
Device 1: unknown device
|
|
scanning bus for devices...
|
|
|
|
Device 0: unknown device
|
|
starting USB...
|
|
No working controllers found
|
|
No ethernet found.
|
|
No ethernet found.
|
|
=>
|
|
|
|
Where now the regions are slightly off:
|
|
|
|
Domain0 Region00 : 0x0000000040000000-0x0000000040000fff M: (I,R,W) S/U: (R,W)
|
|
Domain0 Region01 : 0x0000000080040000-0x000000008004ffff M: (R,W) S/U: ()
|
|
Domain0 Region02 : 0x0000000080000000-0x000000008003ffff M: (R,X) S/U: ()
|
|
Domain0 Region03 : 0x0000000000000000-0xffffffffffffffff M: () S/U: (R,W,X)
|
|
|
|
I would assume that the region 1 is where OpenSBI places its own data, and
|
|
region 2 is where it places its own code. Then, in region 0 there is the serial
|
|
area.
|
|
|
|
Interestingly, I can read and write to the 0x80000000 - 0x81000000 from u-boot
|
|
without problems:
|
|
|
|
=> mtest 0x80000000 0x81000000 0 4
|
|
Testing 80000000 ... 81000000:
|
|
Pattern FFFFFFFFFFFFFFFF Writing... Reading...Iteration: 4
|
|
Tested 4 iteration(s) with 0 errors.
|
|
|
|
So I suspect that it disables those regions before jumping into U-Boot.
|
|
|
|
What I don't understand is why the MMIO region 0 is starting at 0x40000000 while
|
|
the UART port should be mapped in 0x40001000 as per the device tree. Maybe we
|
|
could try with the generic configuration of OpenSBI and see if it can load the
|
|
plic and the serial ports properly directly from the device tree.
|
|
|
|
Nice, with OpenSBI 1.5 I can see the console errors when trying the generic
|
|
configuration:
|
|
|
|
OpenSBI v1.5
|
|
____ _____ ____ _____
|
|
/ __ \ / ____| _ \_ _|
|
|
| | | |_ __ ___ _ __ | (___ | |_) || |
|
|
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
|
|
| |__| | |_) | __/ | | |____) | |_) || |_
|
|
\____/| .__/ \___|_| |_|_____/|____/_____|
|
|
| |
|
|
|_|
|
|
|
|
init_coldboot: timer init failed (error -3)
|
|
|
|
Seems to be failing in `sbi_timer_init()` with `cold_boot = true`.
|
|
|
|
And the -3 error seems to be:
|
|
|
|
#define SBI_ERR_INVALID_PARAM -3
|
|
|
|
I assume it is calling `fdt_timer_init()`.
|
|
|
|
Let's try removing the `reg-names` property, as it seems to cause it to enter a
|
|
different branch, but "control" is never matched there.
|
|
|
|
Still failing, the problem must be somewhere else.
|
|
|
|
Let's try with openpiton configuration instead.
|
|
|
|
Doesn't even start the UART:
|
|
|
|
GGGGGGGGG
|
|
|
|
These G's must be coming from the bootrom.
|
|
|
|
So let's go back to the generic platform and place some `printf()` calls to
|
|
determine where it is failing.
|
|
|
|
OpenSBI v1.5
|
|
____ _____ ____ _____
|
|
/ __ \ / ____| _ \_ _|
|
|
| | | |_ __ ___ _ __ | (___ | |_) || |
|
|
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
|
|
| |__| | |_) | __/ | | |____) | |_) || |_
|
|
\____/| .__/ \___|_| |_|_____/|____/_____|
|
|
| |
|
|
|_|
|
|
|
|
sbi_timer_init: begins
|
|
sbi_timer_init: got Zicntr extension
|
|
fdt_timer_cold_init: pos = 0
|
|
fdt_timer_cold_init: got match, name = riscv,clint0
|
|
fdt_timer_cold_init: enabled
|
|
fdt_timer_cold_init: drc->cold_init = -3
|
|
fdt_timer_init: fdt_timer_cold_init failed (-3)
|
|
sbi_platform_timer: sbi_platform_timer_init failed (-3)
|
|
init_coldboot: timer init failed (error -3)
|
|
|
|
Okay, now we can see where it failed. I wonder why aren't these messages enabled
|
|
by default. I'll guess this is the `timer_mtimer_cold_init()` function, so let's
|
|
add some more instrumentation there.
|
|
|
|
It seems that SiFive timer has a very long weird offset:
|
|
|
|
if (is_clint) { /* SiFive CLINT */
|
|
/* Set CLINT addresses */
|
|
mt->mtimecmp_addr = addr[0] + ACLINT_DEFAULT_MTIMECMP_OFFSET;
|
|
mt->mtimecmp_size = ACLINT_DEFAULT_MTIMECMP_SIZE;
|
|
if (!quirks->clint_without_mtime) {
|
|
mt->mtime_addr = addr[0] + ACLINT_DEFAULT_MTIME_OFFSET;
|
|
mt->mtime_size = size[0] - mt->mtimecmp_size;
|
|
/* Adjust MTIMER address and size for CLINT device */
|
|
mt->mtime_addr += quirks->clint_mtime_offset;
|
|
mt->mtime_size -= quirks->clint_mtime_offset;
|
|
} else {
|
|
mt->mtime_addr = mt->mtime_size = 0;
|
|
}
|
|
mt->mtimecmp_addr += quirks->clint_mtime_offset;
|
|
} else { /* RISC-V ACLINT MTIMER */
|
|
/* Set ACLINT MTIMER addresses */
|
|
mt->mtime_addr = addr[0];
|
|
mt->mtime_size = size[0];
|
|
mt->mtimecmp_addr = addr[1];
|
|
mt->mtimecmp_size = size[1];
|
|
}
|
|
|
|
We may want to use the ACLINT timer instead. Let's first see where the addresses
|
|
lay in memory, and then use that to verify we change it to 0x0 and 0x8.
|
|
|
|
GGGGGGGGG
|
|
OpenSBI v1.5
|
|
____ _____ ____ _____
|
|
/ __ \ / ____| _ \_ _|
|
|
| | | |_ __ ___ _ __ | (___ | |_) || |
|
|
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
|
|
| |__| | |_) | __/ | | |____) | |_) || |_
|
|
\____/| .__/ \___|_| |_|_____/|____/_____|
|
|
| |
|
|
|_|
|
|
|
|
sbi_timer_init: begins
|
|
sbi_timer_init: got Zicntr extension
|
|
fdt_timer_cold_init: pos = 0
|
|
fdt_timer_cold_init: got match, name = riscv,clint0
|
|
fdt_timer_cold_init: enabled
|
|
timer_mtimer_cold_init: begins, is_clint = 1
|
|
timer_mtimer_cold_init: mtime_addr = 0x4000dff8
|
|
timer_mtimer_cold_init: mtime_size = 0x000b4008
|
|
timer_mtimer_cold_init: mtime_addr = 0x40006000
|
|
timer_mtimer_cold_init: mtime_addr = 0x00007ff8
|
|
fdt_timer_cold_init: drc->cold_init = -3
|
|
fdt_timer_init: fdt_timer_cold_init failed (-3)
|
|
sbi_platform_timer: sbi_platform_timer_init failed (-3)
|
|
init_coldboot: timer init failed (error -3)
|
|
|
|
Yeah, those addresses are not what we want. Based on the device tree, the clint
|
|
must be at 0x40002000, so they should be 40002000 and 40002008. Also I made some
|
|
typos in the printf command, this is the patch:
|
|
|
|
+ sbi_printf("timer_mtimer_cold_init: mtime_addr = 0x%08lx\n", mt->mtime_addr);
|
|
+ sbi_printf("timer_mtimer_cold_init: mtime_size = 0x%08lx\n", mt->mtime_size);
|
|
+ sbi_printf("timer_mtimer_cold_init: mtime_addr = 0x%08lx\n", mt->mtimecmp_addr);
|
|
+ sbi_printf("timer_mtimer_cold_init: mtime_addr = 0x%08lx\n", mt->mtimecmp_size);
|
|
|
|
So, let's fix the patch and switch to the "riscv,aclint-mtimer" timer, which
|
|
doesn't set any quirk or weird offset.
|