nixos-riscv/fpga/lagarto_hun.dts

=> fdt print
/ {
	#address-cells = <0x00000002>;
	#size-cells = <0x00000002>;
	compatible = "BSC,Lagarto-bare-dev";
	model = "BSC,Lagarto-bare";
	chosen {
	};
	cpus {
		#address-cells = <0x00000001>;
		#size-cells = <0x00000000>;
		timebase-frequency = <0x0005f5e1>;
		cpu@0 {
			clock-frequency = <0x02faf080>;
			device_type = "cpu";
			reg = <0x00000000>;
			status = "okay";
			compatible = "BSC, Lagarto", "riscv";
			riscv,isa = "rv64imafdcv";
			mmu-type = "riscv,sv39";
			tlb-split;
			interrupt-controller {
				#interrupt-cells = <0x00000001>;
				interrupt-controller;
				compatible = "riscv,cpu-intc";
				phandle = <0x00000004>;
			};
		};
		cpu@1 {
			clock-frequency = <0x02faf080>;
			device_type = "cpu";
			reg = <0x00000001>;
			status = "okay";
			compatible = "BSC, Lagarto", "riscv";
			riscv,isa = "rv64imafdcv";
			mmu-type = "riscv,sv39";
			tlb-split;
			interrupt-controller {
				#interrupt-cells = <0x00000001>;
				interrupt-controller;
				compatible = "riscv,cpu-intc";
				phandle = <0x00000005>;
			};
		};
		cpu@2 {
			clock-frequency = <0x02faf080>;
			device_type = "cpu";
			reg = <0x00000002>;
			status = "okay";
			compatible = "BSC, Lagarto", "riscv";
			riscv,isa = "rv64imafdcv";
			mmu-type = "riscv,sv39";
			tlb-split;
			interrupt-controller {
				#interrupt-cells = <0x00000001>;
				interrupt-controller;
				compatible = "riscv,cpu-intc";
				phandle = <0x00000006>;
			};
		};
		cpu@3 {
			clock-frequency = <0x02faf080>;
			device_type = "cpu";
			reg = <0x00000003>;
			status = "okay";
			compatible = "BSC, Lagarto", "riscv";
			riscv,isa = "rv64imafdcv";
			mmu-type = "riscv,sv39";
			tlb-split;
			interrupt-controller {
				#interrupt-cells = <0x00000001>;
				interrupt-controller;
				compatible = "riscv,cpu-intc";
				phandle = <0x00000007>;
			};
		};
	};
	memory@80000000 {
		device_type = "memory";
		reg = <0x00000000 0x80000000 0x00000001 0x80000000>;
	};
	reserved-memory {
		#address-cells = <0x00000002>;
		#size-cells = <0x00000002>;
		ranges;
		mmode_resv1@80000000 {
			reg = <0x00000000 0x80000000 0x00000000 0x00040000>;
			no-map;
		};
		mmode_resv0@80040000 {
			reg = <0x00000000 0x80040000 0x00000000 0x00020000>;
			no-map;
		};
		eth_pool_node {
			reg = <0x00000080 0x40000000 0x00000000 0x10000000>;
			compatible = "shared-dma-pool";
			phandle = <0x00000002>;
		};
		onic_pool_node {
			reg = <0x00000080 0x70000000 0x00000000 0x10000000>;
			compatible = "shared-dma-pool";
		};
	};
	eth0_clk {
		compatible = "fixed-clock";
		#clock-cells = <0x00000000>;
		clock-frequency = <0x09502f90>;
		phandle = <0x00000003>;
	};
	soc {
		#address-cells = <0x00000002>;
		#size-cells = <0x00000002>;
		compatible = "BSC,Lagarto-bare-soc", "simple-bus";
		ranges;
		uart@fff0c2c000 {
			compatible = "ns16550";
			reg = <0x000000ff 0xf0c2c000 0x00000000 0x000d4000>;
			clock-frequency = <0x02faf080>;
			current-speed = <0x0001c200>;
			device_type = "serial";
			interrupt-parent = <0x00000001>;
			interrupts = <0x00000001>;
			reg-offset = <0x00001000>;
			reg-shift = <0x00000000>;
		};
		ethernet0 {
			xlnx,rxmem = <0x000005f2>;
			carv,mtu = <0x000005dc>;
			carv,no-mac;
			device_type = "network";
			local-mac-address = [00 0a 35 23 07 84];
			axistream-connected = <0x000000fe>;
			compatible = "xlnx,xxv-ethernet-1.0-carv";
			memory-region = <0x00000002>;
		};
		dma@fff0800000 {
			xlnx,include-dre;
			phandle = <0x000000fe>;
			#dma-cells = <0x00000001>;
			compatible = "xlnx,axi-dma-1.00.a";
			clock-names = "s_axi_lite_aclk", "m_axi_mm2s_aclk", "m_axi_s2mm_aclk", "m_axi_sg_aclk";
			clocks = <0x00000003 0x00000003 0x00000003 0x00000003>;
			reg = <0x000000ff 0xf0800000 0x00000000 0x00400000>;
			interrupt-names = "mm2s_introut", "s2mm_introut";
			interrupt-parent = <0x00000001>;
			interrupts = <0x00000002 0x00000003>;
			xlnx,addrwidth = <0x00000028>;
			xlnx,include-sg;
			xlnx,sg-length-width = <0x00000017>;
			dma-channel@fff0800000 {
				compatible = "xlnx,axi-dma-mm2s-channel";
				dma-channels = <0x00000001>;
				interrupts = <0x00000002>;
				xlnx,datawidth = <0x00000040>;
				xlnx,device-id = <0x00000000>;
				xlnx,include-dre;
			};
			dma-channel@fff0800030 {
				compatible = "xlnx,axi-dma-s2mm-channel";
				dma-channels = <0x00000001>;
				interrupts = <0x00000003>;
				xlnx,datawidth = <0x00000040>;
				xlnx,device-id = <0x00000000>;
				xlnx,include-dre;
			};
		};
		clint@fff1020000 {
			compatible = "riscv,clint0";
			interrupts-extended = <0x00000004 0x00000003 0x00000004 0x00000007 0x00000005 0x00000003 0x00000005 0x00000007 0x00000006 0x00000003 0x00000006 0x00000007 0x00000007 0x00000003 0x00000007 0x00000007>;
			reg = <0x000000ff 0xf1020000 0x00000000 0x000c0000>;
			reg-names = "control";
		};
		plic@fff1100000 {
			#address-cells = <0x00000000>;
			#interrupt-cells = <0x00000001>;
			compatible = "riscv,plic0";
			interrupt-controller;
			interrupts-extended = <0x00000004 0xffffffff 0x00000004 0x00000009 0x00000005 0xffffffff 0x00000005 0x00000009 0x00000006 0xffffffff 0x00000006 0x00000009 0x00000007 0xffffffff 0x00000007 0x00000009>;
			reg = <0x000000ff 0xf1100000 0x00000000 0x04000000>;
			riscv,max-priority = <0x00000007>;
			riscv,ndev = <0x00000003>;
			phandle = <0x00000001>;
		};
	};
};