2.3 KiB
| title | author | date |
|---|---|---|
| Update 2023-09-12 | Rodrigo Arias Mallo | 2023-09-12 |
This is a summary of notable changes introduced in the jungle cluster in the last months.
New Ceph filesystem available
We have installed the latest Ceph filesystem (18.2.0) which stores three redundant copies of the data so a failure in one disk doesn't cause data loss. It is mounted in /ceph and available for use in the owl1, owl2 and hut nodes.
The throughput is limited by the 1 Gigabit Ethernet speed, but should be reasonably fast for most workloads. Here is a test with dd which reaches the network limit:
hut% dd if=/dev/urandom of=/ceph/rarias/urandom bs=1M count=1024
1024+0 records in
1024+0 records out
1073741824 bytes (1,1 GB, 1,0 GiB) copied, 8,98544 s, 119 MB/s
SLURM power save
The SLURM daemon has been configured to power down the nodes after one hour of idling. When a new job is allocated to a node that is powered off, it is automatically turned on and as soon as it becomes available it will execute the job. Here is an example with two nodes that boot and execute a simple job that shows the date.
hut% date; srun -N 2 date
2023-09-12T17:36:09 CEST
2023-09-12T17:38:26 CEST
2023-09-12T17:38:18 CEST
You can expect a similar delay (around 2-3 min) while the nodes are starting. Notice that while the nodes are kept on, the delay is not noticeable:
hut% date; srun -N 2 date
2023-09-12T17:40:04 CEST
2023-09-12T17:40:04 CEST
2023-09-12T17:40:04 CEST
Power and temperature monitoring
In the cluster, we monitor the temperature and the power draw of all nodes. This allows us to understand which machines are not being used and turn them off to save energy that otherwise would be wasted. Here is an example where some nodes are powered off to save energy:
We also configured the nodes to work at low CPU frequencies, so the temperature is kept low to increase the lifespan of the node components. Towards these goals, we have configured two alerts that trigger when the CPUs of a node exceeds the limit temperature of 80 °C or when the power draw exceeds 350 W.
By keeping the power consumption and temperatures controlled, we can safely incorporate more machines that will only be used on demand.