Fetch website from its own git repository

Reviewed-by: Aleix Boné <abonerib@bsc.es>

doc/trim.sh

@@ -0,0 +1,46 @@
+#!/bin/sh
+
+# Trims the jungle repository by moving the website to its own repository and
+# removing it from jungle. It also removes big pdf files and kernel
+# configurations so the jungle repository is small.
+
+set -e
+
+if [ -e oldjungle -o -e newjungle -o -e website ]; then
+  echo "remove oldjungle/, newjungle/ and website/ first"
+  exit 1
+fi
+
+# Clone the old jungle repo
+git clone gitea@tent:rarias/jungle.git oldjungle
+
+# First split the website into a new repository
+mkdir website && git -C website init -b master
+git-filter-repo \
+  --path web \
+  --subdirectory-filter web \
+  --source oldjungle \
+  --target website
+
+# Then remove the website, pdf files and big kernel configs
+mkdir newjungle && git -C newjungle init -b master
+git-filter-repo \
+  --invert-paths \
+  --path web \
+  --path-glob 'doc*.pdf' \
+  --path-glob '**/kernel/configs/lockdep' \
+  --path-glob '**/kernel/configs/defconfig' \
+  --source oldjungle \
+  --target newjungle
+
+set -x
+
+du -sh oldjungle newjungle website
+#  57M  oldjungle
+# 2,3M  newjungle
+# 6,4M  website
+
+du -sh --exclude=.git oldjungle newjungle website
+#  30M  oldjungle
+# 700K  newjungle
+# 3,5M  website

flake.lock

@@ -10,11 +10,11 @@
         "systems": "systems"
       },
       "locked": {
-        "lastModified": 1723293904,
+        "lastModified": 1750173260,
-        "narHash": "sha256-b+uqzj+Wa6xgMS9aNbX4I+sXeb5biPDi39VgvSFqFvU=",
+        "narHash": "sha256-9P1FziAwl5+3edkfFcr5HeGtQUtrSdk/MksX39GieoA=",
         "owner": "ryantm",
         "repo": "agenix",
-        "rev": "f6291c5935fdc4e0bef208cfc0dcab7e3f7a1c41",
+        "rev": "531beac616433bac6f9e2a19feb8e99a22a66baf",
         "type": "github"
       },
       "original": {
@@ -30,11 +30,11 @@
         ]
       },
       "locked": {
-        "lastModified": 1732868163,
+        "lastModified": 1749650500,
-        "narHash": "sha256-qck4h298AgcNI6BnGhEwl26MTLXjumuJVr+9kak7uPo=",
+        "narHash": "sha256-2MHfVPV6RA7qPSCtXh4+KK0F0UjN+J4z8//+n6NK7Xs=",
         "ref": "refs/heads/master",
-        "rev": "6782fc6c5b5a29e84a7f2c2d1064f4bcb1288c0f",
+        "rev": "9d1944c658929b6f98b3f3803fead4d1b91c4405",
-        "revCount": 952,
+        "revCount": 961,
         "type": "git",
         "url": "https://git.sr.ht/~rodarima/bscpkgs"
       },
@@ -51,11 +51,11 @@
         ]
       },
       "locked": {
-        "lastModified": 1700795494,
+        "lastModified": 1744478979,
-        "narHash": "sha256-gzGLZSiOhf155FW7262kdHo2YDeugp3VuIFb4/GGng0=",
+        "narHash": "sha256-dyN+teG9G82G+m+PX/aSAagkC+vUv0SgUw3XkPhQodQ=",
         "owner": "lnl7",
         "repo": "nix-darwin",
-        "rev": "4b9b83d5a92e8c1fbfd8eb27eda375908c11ec4d",
+        "rev": "43975d782b418ebf4969e9ccba82466728c2851b",
         "type": "github"
       },
       "original": {
@@ -73,11 +73,11 @@
         ]
       },
       "locked": {
-        "lastModified": 1703113217,
+        "lastModified": 1745494811,
-        "narHash": "sha256-7ulcXOk63TIT2lVDSExj7XzFx09LpdSAPtvgtM7yQPE=",
+        "narHash": "sha256-YZCh2o9Ua1n9uCvrvi5pRxtuVNml8X2a03qIFfRKpFs=",
         "owner": "nix-community",
         "repo": "home-manager",
-        "rev": "3bfaacf46133c037bb356193bd2f1765d9dc82c1",
+        "rev": "abfad3d2958c9e6300a883bd443512c55dfeb1be",
         "type": "github"
       },
       "original": {
@@ -88,16 +88,16 @@
     },
     "nixpkgs": {
       "locked": {
-        "lastModified": 1736867362,
+        "lastModified": 1752436162,
-        "narHash": "sha256-i/UJ5I7HoqmFMwZEH6vAvBxOrjjOJNU739lnZnhUln8=",
+        "narHash": "sha256-Kt1UIPi7kZqkSc5HVj6UY5YLHHEzPBkgpNUByuyxtlw=",
         "owner": "NixOS",
         "repo": "nixpkgs",
-        "rev": "9c6b49aeac36e2ed73a8c472f1546f6d9cf1addc",
+        "rev": "dfcd5b901dbab46c9c6e80b265648481aafb01f8",
         "type": "github"
       },
       "original": {
         "owner": "NixOS",
-        "ref": "nixos-24.11",
+        "ref": "nixos-25.05",
         "repo": "nixpkgs",
         "type": "github"
       }

flake.nix

@@ -1,6 +1,6 @@
 {
   inputs = {
-    nixpkgs.url = "github:NixOS/nixpkgs/nixos-24.11";
+    nixpkgs.url = "github:NixOS/nixpkgs/nixos-25.05";
     agenix.url = "github:ryantm/agenix";
     agenix.inputs.nixpkgs.follows = "nixpkgs";
     bscpkgs.url = "git+https://git.sr.ht/~rodarima/bscpkgs";
@@ -27,6 +27,8 @@ in
       lake2   = mkConf "lake2";
       raccoon = mkConf "raccoon";
       fox     = mkConf "fox";
+      apex    = mkConf "apex";
+      weasel  = mkConf "weasel";
     };
 
     packages.x86_64-linux = self.nixosConfigurations.hut.pkgs // {

keys.nix

@@ -2,25 +2,28 @@
 # here all the public keys
 rec {
   hosts = {
-    hut   = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAICO7jIp6JRnRWTMDsTB/aiaICJCl4x8qmKMPSs4lCqP1 hut";
+    hut     = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAICO7jIp6JRnRWTMDsTB/aiaICJCl4x8qmKMPSs4lCqP1 hut";
-    owl1  = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIMqMEXO0ApVsBA6yjmb0xP2kWyoPDIWxBB0Q3+QbHVhv owl1";
+    owl1    = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIMqMEXO0ApVsBA6yjmb0xP2kWyoPDIWxBB0Q3+QbHVhv owl1";
-    owl2  = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIHurEYpQzNHqWYF6B9Pd7W8UPgF3BxEg0BvSbsA7BAdK owl2";
+    owl2    = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIHurEYpQzNHqWYF6B9Pd7W8UPgF3BxEg0BvSbsA7BAdK owl2";
-    eudy  = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIL+WYPRRvZupqLAG0USKmd/juEPmisyyJaP8hAgYwXsG eudy";
+    eudy    = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIL+WYPRRvZupqLAG0USKmd/juEPmisyyJaP8hAgYwXsG eudy";
-    koro  = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIImiTFDbxyUYPumvm8C4mEnHfuvtBY1H8undtd6oDd67 koro";
+    koro    = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIImiTFDbxyUYPumvm8C4mEnHfuvtBY1H8undtd6oDd67 koro";
-    bay   = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAICvGBzpRQKuQYHdlUQeAk6jmdbkrhmdLwTBqf3el7IgU bay";
+    bay     = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAICvGBzpRQKuQYHdlUQeAk6jmdbkrhmdLwTBqf3el7IgU bay";
-    lake2 = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAINo66//S1yatpQHE/BuYD/Gfq64TY7ZN5XOGXmNchiO0 lake2";
+    lake2   = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAINo66//S1yatpQHE/BuYD/Gfq64TY7ZN5XOGXmNchiO0 lake2";
-    fox   = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIDwItIk5uOJcQEVPoy/CVGRzfmE1ojrdDcI06FrU4NFT fox";
+    fox     = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIDwItIk5uOJcQEVPoy/CVGRzfmE1ojrdDcI06FrU4NFT fox";
-    tent  = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFAtTpHtdYoelbknD/IcfBlThwLKJv/dSmylOgpg3FRM tent";
+    tent    = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFAtTpHtdYoelbknD/IcfBlThwLKJv/dSmylOgpg3FRM tent";
+    apex    = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIBvUFjSfoxXnKwXhEFXx5ckRKJ0oewJ82mRitSMNMKjh apex";
+    weasel  = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFLJrQ8BF6KcweQV8pLkSbFT+tbDxSG9qxrdQE65zJZp weasel";
+    raccoon = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIGNQttFvL0dNEyy7klIhLoK4xXOeM2/K9R7lPMTG3qvK raccoon";
   };
 
   hostGroup = with hosts; rec {
-    untrusted  = [ fox ];
+    compute    = [ owl1 owl2 fox raccoon ];
-    compute    = [ owl1 owl2 ];
+    playground = [ eudy koro weasel ];
-    playground = [ eudy koro ];
     storage    = [ bay lake2 ];
     monitor    = [ hut ];
+    login      = [ apex ];
 
-    system     = storage ++ monitor;
+    system     = storage ++ monitor ++ login;
     safe       = system ++ compute;
     all        = safe ++ playground;
   };
@@ -28,6 +31,7 @@ rec {
   admins = {
     "rarias@hut"  = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIE1oZTPtlEXdGt0Ak+upeCIiBdaDQtcmuWoTUCVuSVIR rarias@hut";
     "rarias@tent" = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIIwlWSBTZi74WTz5xn6gBvTmCoVltmtIAeM3RMmkh4QZ rarias@tent";
+    "rarias@fox"  = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIDSbw3REAKECV7E2c/e2XJITudJQWq2qDSe2N1JHqHZd rarias@fox";
     root          = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIII/1TNArcwA6D47mgW4TArwlxQRpwmIGiZDysah40Gb root@hut";
   };
 }

m/apex/configuration.nix

@@ -0,0 +1,69 @@
+{ lib, config, pkgs, ... }:
+
+{
+  imports = [
+    ../common/xeon.nix
+    ../common/ssf/hosts.nix
+    ../module/ceph.nix
+    ../module/hut-substituter.nix
+    ../module/slurm-server.nix
+    ./nfs.nix
+    ./wireguard.nix
+  ];
+
+  # Don't install grub MBR for now
+  boot.loader.grub.device = "nodev";
+
+  boot.initrd.kernelModules = [
+    "megaraid_sas" # For HW RAID
+  ];
+
+  environment.systemPackages = with pkgs; [
+    storcli # To manage HW RAID
+  ];
+
+  fileSystems."/home" = {
+    device = "/dev/disk/by-label/home";
+    fsType = "ext4";
+  };
+
+  # No swap, there is plenty of RAM
+  swapDevices = lib.mkForce [];
+
+  networking = {
+    hostName = "apex";
+    defaultGateway = "84.88.53.233";
+    nameservers = [ "8.8.8.8" ];
+
+    # Public facing interface
+    interfaces.eno1.ipv4.addresses = [ {
+      address = "84.88.53.236";
+      prefixLength = 29;
+    } ];
+
+    # Internal LAN to our Ethernet switch
+    interfaces.eno2.ipv4.addresses = [ {
+      address = "10.0.40.30";
+      prefixLength = 24;
+    } ];
+
+    # Infiniband over Omnipath switch (disconnected for now)
+    # interfaces.ibp5s0 = {};
+
+    nat = {
+      enable = true;
+      internalInterfaces = [ "eno2" ];
+      externalInterface = "eno1";
+    };
+  };
+
+  networking.firewall = {
+    extraCommands = ''
+      # Blackhole BSC vulnerability scanner (OpenVAS) as it is spamming our
+      # logs. Insert as first position so we also protect SSH.
+      iptables -I nixos-fw 1 -p tcp -s 192.168.8.16 -j nixos-fw-refuse
+      # Same with opsmonweb01.bsc.es which seems to be trying to access via SSH
+      iptables -I nixos-fw 2 -p tcp -s 84.88.52.176 -j nixos-fw-refuse
+    '';
+  };
+}

m/apex/nfs.nix

@@ -0,0 +1,48 @@
+{ ... }:
+
+{
+  services.nfs.server = {
+    enable = true;
+    lockdPort = 4001;
+    mountdPort = 4002;
+    statdPort = 4000;
+    exports = ''
+      /home 10.0.40.0/24(rw,async,no_subtree_check,no_root_squash)
+      /home 10.106.0.0/24(rw,async,no_subtree_check,no_root_squash)
+    '';
+  };
+  networking.firewall = {
+    # Check with `rpcinfo -p`
+    extraCommands = ''
+      # Accept NFS traffic from compute nodes but not from the outside
+      iptables -A nixos-fw -p tcp -s 10.0.40.0/24 --dport 111   -j nixos-fw-accept
+      iptables -A nixos-fw -p tcp -s 10.0.40.0/24 --dport 2049  -j nixos-fw-accept
+      iptables -A nixos-fw -p tcp -s 10.0.40.0/24 --dport 4000  -j nixos-fw-accept
+      iptables -A nixos-fw -p tcp -s 10.0.40.0/24 --dport 4001  -j nixos-fw-accept
+      iptables -A nixos-fw -p tcp -s 10.0.40.0/24 --dport 4002  -j nixos-fw-accept
+      iptables -A nixos-fw -p tcp -s 10.0.40.0/24 --dport 20048 -j nixos-fw-accept
+      # Same but UDP
+      iptables -A nixos-fw -p udp -s 10.0.40.0/24 --dport 111   -j nixos-fw-accept
+      iptables -A nixos-fw -p udp -s 10.0.40.0/24 --dport 2049  -j nixos-fw-accept
+      iptables -A nixos-fw -p udp -s 10.0.40.0/24 --dport 4000  -j nixos-fw-accept
+      iptables -A nixos-fw -p udp -s 10.0.40.0/24 --dport 4001  -j nixos-fw-accept
+      iptables -A nixos-fw -p udp -s 10.0.40.0/24 --dport 4002  -j nixos-fw-accept
+      iptables -A nixos-fw -p udp -s 10.0.40.0/24 --dport 20048 -j nixos-fw-accept
+
+      # Accept NFS traffic from wg0
+      iptables -A nixos-fw -p tcp -i wg0 -s 10.106.0.0/24 --dport 111   -j nixos-fw-accept
+      iptables -A nixos-fw -p tcp -i wg0 -s 10.106.0.0/24 --dport 2049  -j nixos-fw-accept
+      iptables -A nixos-fw -p tcp -i wg0 -s 10.106.0.0/24 --dport 4000  -j nixos-fw-accept
+      iptables -A nixos-fw -p tcp -i wg0 -s 10.106.0.0/24 --dport 4001  -j nixos-fw-accept
+      iptables -A nixos-fw -p tcp -i wg0 -s 10.106.0.0/24 --dport 4002  -j nixos-fw-accept
+      iptables -A nixos-fw -p tcp -i wg0 -s 10.106.0.0/24 --dport 20048 -j nixos-fw-accept
+      # Same but UDP
+      iptables -A nixos-fw -p udp -i wg0 -s 10.106.0.0/24 --dport 111   -j nixos-fw-accept
+      iptables -A nixos-fw -p udp -i wg0 -s 10.106.0.0/24 --dport 2049  -j nixos-fw-accept
+      iptables -A nixos-fw -p udp -i wg0 -s 10.106.0.0/24 --dport 4000  -j nixos-fw-accept
+      iptables -A nixos-fw -p udp -i wg0 -s 10.106.0.0/24 --dport 4001  -j nixos-fw-accept
+      iptables -A nixos-fw -p udp -i wg0 -s 10.106.0.0/24 --dport 4002  -j nixos-fw-accept
+      iptables -A nixos-fw -p udp -i wg0 -s 10.106.0.0/24 --dport 20048 -j nixos-fw-accept
+    '';
+  };
+}

m/apex/wireguard.nix

@@ -0,0 +1,42 @@
+{ config, ... }:
+
+{
+  networking.firewall = {
+    allowedUDPPorts = [ 666 ];
+  };
+
+  age.secrets.wgApex.file = ../../secrets/wg-apex.age;
+
+  # Enable WireGuard
+  networking.wireguard.enable = true;
+  networking.wireguard.interfaces = {
+    # "wg0" is the network interface name. You can name the interface arbitrarily.
+    wg0 = {
+      ips = [ "10.106.0.30/24" ];
+      listenPort = 666;
+      privateKeyFile = config.age.secrets.wgApex.path;
+      # Public key: VwhcN8vSOzdJEotQTpmPHBC52x3Hbv1lkFIyKubrnUA=
+      peers = [
+        {
+          name = "fox";
+          publicKey = "VfMPBQLQTKeyXJSwv8wBhc6OV0j2qAxUpX3kLHunK2Y=";
+          allowedIPs = [ "10.106.0.1/32" ];
+          endpoint = "fox.ac.upc.edu:666";
+          # Send keepalives every 25 seconds. Important to keep NAT tables alive.
+          persistentKeepalive = 25;
+        }
+        {
+          name = "raccoon";
+          publicKey = "QUfnGXSMEgu2bviglsaSdCjidB51oEDBFpnSFcKGfDI=";
+          allowedIPs = [ "10.106.0.236/32" "192.168.0.0/16" "10.0.44.0/24" ];
+        }
+      ];
+    };
+  };
+
+  networking.hosts = {
+    "10.106.0.1" = [ "fox" ];
+    "10.106.0.236" = [ "raccoon" ];
+    "10.0.44.4" = [ "tent" ];
+  };
+}

m/bay/configuration.nix

@@ -3,6 +3,7 @@
 {
   imports = [
     ../common/ssf.nix
+    ../module/hut-substituter.nix
     ../module/monitoring.nix
   ];
 

m/common/base.nix

@@ -3,6 +3,7 @@
   # Includes the basic configuration for an Intel server.
   imports = [
     ./base/agenix.nix
+    ./base/always-power-on.nix
     ./base/august-shutdown.nix
     ./base/boot.nix
     ./base/env.nix

m/common/base/always-power-on.nix

@@ -0,0 +1,8 @@
+{
+  imports = [
+    ../../module/power-policy.nix
+  ];
+
+  # Turn on as soon as we have power
+  power.policy = "always-on";
+}

m/common/base/august-shutdown.nix

@@ -1,12 +1,12 @@
 {
-  # Shutdown all machines on August 2nd at 11:00 AM, so we can protect the
+  # Shutdown all machines on August 3rd at 22:00, so we can protect the
   # hardware from spurious electrical peaks on the yearly electrical cut for
   # manteinance that starts on August 4th.
   systemd.timers.august-shutdown = {
-    description = "Shutdown on August 2nd for maintenance";
+    description = "Shutdown on August 3rd for maintenance";
     wantedBy = [ "timers.target" ];
     timerConfig = {
-      OnCalendar = "*-08-02 11:00:00";
+      OnCalendar = "*-08-03 22:00:00";
       RandomizedDelaySec = "10min";
       Unit = "systemd-poweroff.service";
     };

m/common/base/env.nix

@@ -3,8 +3,8 @@
 {
   environment.systemPackages = with pkgs; [
     vim wget git htop tmux pciutils tcpdump ripgrep nix-index nixos-option
-    nix-diff ipmitool freeipmi ethtool lm_sensors ix cmake gnumake file tree
+    nix-diff ipmitool freeipmi ethtool lm_sensors cmake gnumake file tree
-    ncdu config.boot.kernelPackages.perf ldns
+    ncdu config.boot.kernelPackages.perf ldns pv
     # From bsckgs overlay
     osumb
   ];

m/common/base/net.nix

@@ -1,4 +1,4 @@
-{ pkgs, ... }:
+{ pkgs, lib, ... }:
 
 {
   networking = {
@@ -10,10 +10,14 @@
       allowedTCPPorts = [ 22 ];
     };
 
+    # Make sure we use iptables
+    nftables.enable = lib.mkForce false;
+
     hosts = {
       "84.88.53.236" = [ "ssfhead.bsc.es" "ssfhead" ];
-      "84.88.51.152" = [ "raccoon" ];
       "84.88.51.142" = [ "raccoon-ipmi" ];
+      "192.168.11.12" = [ "bscpm04.bsc.es" ];
+      "192.168.11.15" = [ "gitlab-internal.bsc.es" ];
     };
   };
 }

m/common/base/nix.nix

@@ -6,6 +6,8 @@
     (import ../../../pkgs/overlay.nix)
   ];
 
+  nixpkgs.config.allowUnfree = true;
+
   nix = {
     nixPath = [
       "nixpkgs=${nixpkgs}"

m/common/base/users.nix

@@ -56,7 +56,7 @@
         home = "/home/Computational/rpenacob";
         description = "Raúl Peñacoba";
         group = "Computational";
-        hosts = [ "owl1" "owl2" "hut" "tent" "fox" ];
+        hosts = [ "apex" "owl1" "owl2" "hut" "tent" "fox" ];
         hashedPassword = "$6$TZm3bDIFyPrMhj1E$uEDXoYYd1z2Wd5mMPfh3DZAjP7ztVjJ4ezIcn82C0ImqafPA.AnTmcVftHEzLB3tbe2O4SxDyPSDEQgJ4GOtj/";
         openssh.authorizedKeys.keys = [
           "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFYfXg37mauGeurqsLpedgA2XQ9d4Nm0ZGo/hI1f7wwH rpenacob@bsc"
@@ -69,10 +69,10 @@
         home = "/home/Computational/anavarro";
         description = "Antoni Navarro";
         group = "Computational";
-        hosts = [ "hut" "tent" "raccoon" "fox" ];
+        hosts = [ "apex" "hut" "tent" "raccoon" "fox" "weasel" ];
-        hashedPassword = "$6$QdNDsuLehoZTYZlb$CDhCouYDPrhoiB7/seu7RF.Gqg4zMQz0n5sA4U1KDgHaZOxy2as9pbIGeF8tOHJKRoZajk5GiaZv0rZMn7Oq31";
+        hashedPassword = "$6$EgturvVYXlKgP43g$gTN78LLHIhaF8hsrCXD.O6mKnZSASWSJmCyndTX8QBWT6wTlUhcWVAKz65lFJPXjlJA4u7G1ydYQ0GG6Wk07b1";
         openssh.authorizedKeys.keys = [
-          "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAILWjRSlKgzBPZQhIeEtk6Lvws2XNcYwHcwPv4osSgst5 anavarro@ssfhead"
+          "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIMsbM21uepnJwPrRe6jYFz8zrZ6AYMtSEvvt4c9spmFP toni@delltoni"
         ];
       };
 
@@ -82,7 +82,7 @@
         home = "/home/Computational/abonerib";
         description = "Aleix Boné";
         group = "Computational";
-        hosts = [ "owl1" "owl2" "hut" "tent" "raccoon" "fox" ];
+        hosts = [ "apex" "owl1" "owl2" "hut" "tent" "raccoon" "fox" "weasel" ];
         hashedPassword = "$6$V1EQWJr474whv7XJ$OfJ0wueM2l.dgiJiiah0Tip9ITcJ7S7qDvtSycsiQ43QBFyP4lU0e0HaXWps85nqB4TypttYR4hNLoz3bz662/";
         openssh.authorizedKeys.keys = [
           "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIIIFiqXqt88VuUfyANkZyLJNiuroIITaGlOOTMhVDKjf abonerib@bsc"
@@ -95,7 +95,7 @@
         home = "/home/Computational/vlopez";
         description = "Victor López";
         group = "Computational";
-        hosts = [ "koro" ];
+        hosts = [ "apex" "koro" ];
         hashedPassword = "$6$0ZBkgIYE/renVqtt$1uWlJsb0FEezRVNoETTzZMx4X2SvWiOsKvi0ppWCRqI66S6TqMBXBdP4fcQyvRRBt0e4Z7opZIvvITBsEtO0f0";
         openssh.authorizedKeys.keys = [
           "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIGMwlUZRf9jfG666Qa5Sb+KtEhXqkiMlBV2su3x/dXHq victor@arch"
@@ -108,7 +108,7 @@
         home = "/home/Computational/dbautist";
         description = "Dylan Bautista Cases";
         group = "Computational";
-        hosts = [ "hut" "tent" "raccoon" ];
+        hosts = [ "apex" "hut" "tent" "raccoon" ];
         hashedPassword = "$6$a2lpzMRVkG9nSgIm$12G6.ka0sFX1YimqJkBAjbvhRKZ.Hl090B27pdbnQOW0wzyxVWySWhyDDCILjQELky.HKYl9gqOeVXW49nW7q/";
         openssh.authorizedKeys.keys = [
           "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIAb+EQBoS98zrCwnGKkHKwMLdYABMTqv7q9E0+T0QmkS dbautist@bsc-848818791"
@@ -121,7 +121,7 @@
         home = "/home/Computational/dalvare1";
         description = "David Álvarez";
         group = "Computational";
-        hosts = [ "hut" "tent" "fox" ];
+        hosts = [ "apex" "hut" "tent" "fox" ];
         hashedPassword = "$6$mpyIsV3mdq.rK8$FvfZdRH5OcEkUt5PnIUijWyUYZvB1SgeqxpJ2p91TTe.3eQIDTcLEQ5rxeg.e5IEXAZHHQ/aMsR5kPEujEghx0";
         openssh.authorizedKeys.keys = [
           "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIGEfy6F4rF80r4Cpo2H5xaWqhuUZzUsVsILSKGJzt5jF dalvare1@ssfhead"
@@ -134,7 +134,7 @@
         home = "/home/Computational/varcila";
         description = "Vincent Arcila";
         group = "Computational";
-        hosts = [ "hut" "tent" "fox" ];
+        hosts = [ "apex" "hut" "tent" "fox" ];
         hashedPassword = "$6$oB0Tcn99DcM4Ch$Vn1A0ulLTn/8B2oFPi9wWl/NOsJzaFAWjqekwcuC9sMC7cgxEVb.Nk5XSzQ2xzYcNe5MLtmzkVYnRS1CqP39Y0";
         openssh.authorizedKeys.keys = [
           "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIKGt0ESYxekBiHJQowmKpfdouw0hVm3N7tUMtAaeLejK vincent@varch"
@@ -154,6 +154,32 @@
           "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIIV5LEAII5rfe1hYqDYIIrhb1gOw7RcS1p2mhOTqG+zc pedro@pedro-ThinkPad-P14s-Gen-2a"
         ];
       };
+
+      csiringo = {
+        uid = 9653;
+        isNormalUser = true;
+        home = "/home/Computational/csiringo";
+        description = "Cesare Siringo";
+        group = "Computational";
+        hosts = [ ];
+        hashedPassword = "$6$0IsZlju8jFukLlAw$VKm0FUXbS.mVmPm3rcJeizTNU4IM5Nmmy21BvzFL.cQwvlGwFI1YWRQm6gsbd4nbg47mPDvYkr/ar0SlgF6GO1";
+        openssh.authorizedKeys.keys = [
+          "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIHA65zvvG50iuFEMf+guRwZB65jlGXfGLF4HO+THFaed csiringo@bsc.es"
+        ];
+      };
+
+      acinca = {
+        uid = 9654;
+        isNormalUser = true;
+        home = "/home/Computational/acinca";
+        description = "Arnau Cinca";
+        group = "Computational";
+        hosts = [ "apex" "hut" "fox" "owl1" "owl2" ];
+        hashedPassword = "$6$S6PUeRpdzYlidxzI$szyvWejQ4hEN76yBYhp1diVO5ew1FFg.cz4lKiXt2Idy4XdpifwrFTCIzLTs5dvYlR62m7ekA5MrhcVxR5F/q/";
+        openssh.authorizedKeys.keys = [
+          "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFmMqKqPg4uocNOr3O41kLbZMOMJn3m2ZdN1JvTR96z3 bsccns@arnau-bsc"
+        ];
+      };
     };
 
     groups = {

m/common/ssf.nix

@@ -3,7 +3,8 @@
   imports = [
     ./xeon.nix
     ./ssf/fs.nix
+    ./ssf/hosts.nix
+    ./ssf/hosts-remote.nix
     ./ssf/net.nix
-    ./ssf/ssh.nix
   ];
 }

m/common/ssf/hosts-remote.nix

@@ -0,0 +1,9 @@
+{ pkgs, ... }:
+
+{
+  networking.hosts = {
+    # Remote hosts visible from compute nodes
+    "10.106.0.236" = [ "raccoon" ];
+    "10.0.44.4" = [ "tent" ];
+  };
+}

m/common/ssf/hosts.nix

@@ -0,0 +1,23 @@
+{ pkgs, ... }:
+
+{
+  networking.hosts = {
+    # Login
+    "10.0.40.30" = [ "apex" ];
+
+    # Storage
+    "10.0.40.40" = [ "bay" ];   "10.0.42.40" = [ "bay-ib" ];    "10.0.40.141" = [ "bay-ipmi" ];
+    "10.0.40.41" = [ "oss01" ]; "10.0.42.41" = [ "oss01-ib0" ]; "10.0.40.142" = [ "oss01-ipmi" ];
+    "10.0.40.42" = [ "lake2" ]; "10.0.42.42" = [ "lake2-ib" ];  "10.0.40.143" = [ "lake2-ipmi" ];
+
+    # Xeon compute
+    "10.0.40.1" = [ "owl1" ];   "10.0.42.1" = [ "owl1-ib" ];   "10.0.40.101" = [ "owl1-ipmi" ];
+    "10.0.40.2" = [ "owl2" ];   "10.0.42.2" = [ "owl2-ib" ];   "10.0.40.102" = [ "owl2-ipmi" ];
+    "10.0.40.3" = [ "xeon03" ]; "10.0.42.3" = [ "xeon03-ib" ]; "10.0.40.103" = [ "xeon03-ipmi" ];
+    #"10.0.40.4" = [ "tent" ];   "10.0.42.4" = [ "tent-ib" ];   "10.0.40.104" = [ "tent-ipmi" ];
+    "10.0.40.5" = [ "koro" ];   "10.0.42.5" = [ "koro-ib" ];   "10.0.40.105" = [ "koro-ipmi" ];
+    "10.0.40.6" = [ "weasel" ]; "10.0.42.6" = [ "weasel-ib" ]; "10.0.40.106" = [ "weasel-ipmi" ];
+    "10.0.40.7" = [ "hut" ];    "10.0.42.7" = [ "hut-ib" ];    "10.0.40.107" = [ "hut-ipmi" ];
+    "10.0.40.8" = [ "eudy" ];   "10.0.42.8" = [ "eudy-ib" ];   "10.0.40.108" = [ "eudy-ipmi" ];
+  };
+}

m/common/ssf/net.nix

@@ -9,14 +9,6 @@
     defaultGateway = "10.0.40.30";
     nameservers = ["8.8.8.8"];
 
-    proxy = {
-      default = "http://hut:23080/";
-      noProxy = "127.0.0.1,localhost,internal.domain,10.0.40.40,hut";
-      # Don't set all_proxy as go complains and breaks the gitlab runner, see:
-      # https://github.com/golang/go/issues/16715
-      allProxy = null;
-    };
-
     firewall = {
       extraCommands = ''
         # Prevent ssfhead from contacting our slurmd daemon
@@ -27,64 +19,5 @@
         iptables -A nixos-fw -p tcp -s 10.0.40.0/24 --dport 60000:61000 -j nixos-fw-accept
       '';
     };
-
-    extraHosts = ''
-      10.0.40.30              ssfhead
-      
-      # Node Entry for node: mds01 (ID=72)
-      10.0.40.40              bay mds01 mds01-eth0
-      10.0.42.40              bay-ib mds01-ib0
-      10.0.40.141             bay-ipmi mds01-ipmi0 mds01-ipmi
-      
-      # Node Entry for node: oss01 (ID=73)
-      10.0.40.41              oss01 oss01-eth0
-      10.0.42.41              oss01-ib0
-      10.0.40.142             oss01-ipmi0 oss01-ipmi
-      
-      # Node Entry for node: oss02 (ID=74)
-      10.0.40.42              lake2 oss02 oss02-eth0
-      10.0.42.42              lake2-ib oss02-ib0
-      10.0.40.143             lake2-ipmi oss02-ipmi0 oss02-ipmi
-      
-      # Node Entry for node: xeon01 (ID=15)
-      10.0.40.1               owl1 xeon01 xeon01-eth0
-      10.0.42.1               owl1-ib xeon01-ib0
-      10.0.40.101             owl1-ipmi xeon01-ipmi0 xeon01-ipmi
-      
-      # Node Entry for node: xeon02 (ID=16)
-      10.0.40.2               owl2 xeon02 xeon02-eth0
-      10.0.42.2               owl2-ib xeon02-ib0
-      10.0.40.102             owl2-ipmi xeon02-ipmi0 xeon02-ipmi
-      
-      # Node Entry for node: xeon03 (ID=17)
-      10.0.40.3               xeon03 xeon03-eth0
-      10.0.42.3               xeon03-ib0
-      10.0.40.103             xeon03-ipmi0 xeon03-ipmi
-      
-      # Node Entry for node: xeon04 (ID=18)
-      10.0.40.4               xeon04 xeon04-eth0
-      10.0.42.4               xeon04-ib0
-      10.0.40.104             xeon04-ipmi0 xeon04-ipmi
-      
-      # Node Entry for node: xeon05 (ID=19)
-      10.0.40.5               koro xeon05 xeon05-eth0
-      10.0.42.5               koro-ib xeon05-ib0
-      10.0.40.105             koro-ipmi xeon05-ipmi0
-      
-      # Node Entry for node: xeon06 (ID=20)
-      10.0.40.6               xeon06 xeon06-eth0
-      10.0.42.6               xeon06-ib0
-      10.0.40.106             xeon06-ipmi0 xeon06-ipmi
-      
-      # Node Entry for node: xeon07 (ID=21)
-      10.0.40.7               hut xeon07 xeon07-eth0
-      10.0.42.7               hut-ib xeon07-ib0
-      10.0.40.107             hut-ipmi xeon07-ipmi0 xeon07-ipmi
-      
-      # Node Entry for node: xeon08 (ID=22)
-      10.0.40.8               eudy xeon08 xeon08-eth0
-      10.0.42.8               eudy-ib xeon08-ib0
-      10.0.40.108             eudy-ipmi xeon08-ipmi0 xeon08-ipmi
-    '';
   };
 }

m/common/ssf/ssh.nix

@@ -1,8 +0,0 @@
-{
-  # Connect to intranet git hosts via proxy
-  programs.ssh.extraConfig = ''
-    # Connect to BSC machines via hut proxy too
-    Host amdlogin1.bsc.es armlogin1.bsc.es hualogin1.bsc.es glogin1.bsc.es glogin2.bsc.es fpgalogin1.bsc.es
-      ProxyCommand nc -X connect -x hut:23080 %h %p
-  '';
-}

m/eudy/configuration.nix

@@ -9,6 +9,7 @@
     ./cpufreq.nix
     ./fs.nix
     ./users.nix
+    ../module/hut-substituter.nix
     ../module/debuginfod.nix
   ];
 

m/fox/configuration.nix

@@ -4,9 +4,18 @@
   imports = [
     ../common/base.nix
     ../common/xeon/console.nix
+    ../module/amd-uprof.nix
     ../module/emulation.nix
+    ../module/nvidia.nix
+    ../module/slurm-client.nix
+    ../module/hut-substituter.nix
+    ./wireguard.nix
   ];
 
+  # Don't turn off on August as UPC has different dates.
+  # Fox works fine on power cuts.
+  systemd.timers.august-shutdown.enable = false;
+
   # Select the this using the ID to avoid mismatches
   boot.loader.grub.device = "/dev/disk/by-id/wwn-0x500a07514b0c1103";
 
@@ -14,7 +23,7 @@
   swapDevices = lib.mkForce [];
 
   boot.initrd.availableKernelModules = [ "xhci_pci" "ahci" "nvme" "usbhid" "usb_storage" "sd_mod" ];
-  boot.kernelModules = [ "kvm-amd" "amd_uncore" ];
+  boot.kernelModules = [ "kvm-amd" "amd_uncore" "amd_hsmp" ];
 
   hardware.cpu.amd.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
   hardware.cpu.intel.updateMicrocode = lib.mkForce false;
@@ -22,14 +31,21 @@
   # Use performance for benchmarks
   powerManagement.cpuFreqGovernor = "performance";
 
+  services.amd-uprof.enable = true;
+
   # Disable NUMA balancing
   boot.kernel.sysctl."kernel.numa_balancing" = 0;
 
   # Expose kernel addresses
   boot.kernel.sysctl."kernel.kptr_restrict" = 0;
 
+  # Disable NMI watchdog to save one hw counter (for AMD uProf)
+  boot.kernel.sysctl."kernel.nmi_watchdog" = 0;
+
   services.openssh.settings.X11Forwarding = true;
 
+  services.fail2ban.enable = true;
+
   networking = {
     timeServers = [ "ntp1.upc.edu" "ntp2.upc.edu" ];
     hostName = "fox";
@@ -47,23 +63,20 @@
     interfaces.enp1s0f0np0.useDHCP = true;
   };
 
-  # Use hut for cache
+  # Recommended for new graphics cards
-  nix.settings = {
+  hardware.nvidia.open = true;
-    extra-substituters = [ "https://jungle.bsc.es/cache" ];
-    extra-trusted-public-keys = [ "jungle.bsc.es:pEc7MlAT0HEwLQYPtpkPLwRsGf80ZI26aj29zMw/HH0=" ];
-  };
-
-  # Configure Nvidia driver to use with CUDA
-  hardware.nvidia.package = config.boot.kernelPackages.nvidiaPackages.production;
-  hardware.graphics.enable = true;
-  nixpkgs.config.allowUnfree = true;
-  nixpkgs.config.nvidia.acceptLicense = true;
-  services.xserver.videoDrivers = [ "nvidia" ];
 
   # Mount NVME disks
   fileSystems."/nvme0" = { device = "/dev/disk/by-label/nvme0"; fsType = "ext4"; };
   fileSystems."/nvme1" = { device = "/dev/disk/by-label/nvme1"; fsType = "ext4"; };
 
+  # Mount the NFS home
+  fileSystems."/nfs/home" = {
+    device = "10.106.0.30:/home";
+    fsType = "nfs";
+    options = [ "nfsvers=3" "rsize=1024" "wsize=1024" "cto" "nofail" ];
+  };
+
   # Make a /nvme{0,1}/$USER directory for each user.
   systemd.services.create-nvme-dirs = let
     # Take only normal users in fox
@@ -80,4 +93,20 @@
     wantedBy = [ "multi-user.target" ];
     serviceConfig.ExecStart = script;
   };
+
+  # Only allow SSH connections from users who have a SLURM allocation
+  # See: https://slurm.schedmd.com/pam_slurm_adopt.html
+  security.pam.services.sshd.rules.account.slurm = {
+    control = "required";
+    enable = true;
+    modulePath = "${pkgs.slurm}/lib/security/pam_slurm_adopt.so";
+    args = [ "log_level=debug5" ];
+    order = 999999; # Make it last one
+  };
+
+  # Disable systemd session (pam_systemd.so) as it will conflict with the
+  # pam_slurm_adopt.so module. What happens is that the shell is first adopted
+  # into the slurmstepd task and then into the systemd session, which is not
+  # what we want, otherwise it will linger even if all jobs are gone.
+  security.pam.services.sshd.startSession = lib.mkForce false;
 }

m/fox/wireguard.nix

@@ -0,0 +1,53 @@
+{ config, ... }:
+
+{
+  networking.firewall = {
+    allowedUDPPorts = [ 666 ];
+  };
+
+  age.secrets.wgFox.file = ../../secrets/wg-fox.age;
+
+  networking.wireguard.enable = true;
+  networking.wireguard.interfaces = {
+    # "wg0" is the network interface name. You can name the interface arbitrarily.
+    wg0 = {
+      # Determines the IP address and subnet of the server's end of the tunnel interface.
+      ips = [ "10.106.0.1/24" ];
+
+      # The port that WireGuard listens to. Must be accessible by the client.
+      listenPort = 666;
+
+      # Path to the private key file.
+      privateKeyFile = config.age.secrets.wgFox.path;
+      # Public key: VfMPBQLQTKeyXJSwv8wBhc6OV0j2qAxUpX3kLHunK2Y=
+
+      peers = [
+        # List of allowed peers.
+        { 
+          name = "apex";
+          publicKey = "VwhcN8vSOzdJEotQTpmPHBC52x3Hbv1lkFIyKubrnUA=";
+          # List of IPs assigned to this peer within the tunnel subnet. Used to configure routing.
+          allowedIPs = [ "10.106.0.30/32" ];
+        }
+        {
+          name = "raccoon";
+          publicKey = "QUfnGXSMEgu2bviglsaSdCjidB51oEDBFpnSFcKGfDI=";
+          allowedIPs = [ "10.106.0.236/32" "192.168.0.0/16" "10.0.44.0/24" ];
+        }
+      ];
+    };
+  };
+
+  networking.hosts = {
+    "10.106.0.30" = [ "apex" ];
+    "10.106.0.236" = [ "raccoon" ];
+    "10.0.44.4" = [ "tent" ];
+  };
+
+  networking.firewall = {
+    extraCommands = ''
+      # Accept slurm connections to slurmd from apex (via wireguard)
+      iptables -A nixos-fw -p tcp -i wg0 -s 10.106.0.30/32 -d 10.106.0.1/32 --dport 6818 -j nixos-fw-accept
+    '';
+  };
+}

m/hut/blackbox.yml

@@ -3,160 +3,12 @@ modules:
     prober: http
     timeout: 5s
     http:
-      proxy_url: "http://127.0.0.1:23080"
-      skip_resolve_phase_with_proxy: true
-      follow_redirects: true
-      valid_status_codes: []  # Defaults to 2xx
-      method: GET
-  http_with_proxy:
-    prober: http
-    http:
-      proxy_url: "http://127.0.0.1:3128"
-      skip_resolve_phase_with_proxy: true
-  http_with_proxy_and_headers:
-    prober: http
-    http:
-      proxy_url: "http://127.0.0.1:3128"
-      proxy_connect_header:
-        Proxy-Authorization:
-          - Bearer token
-  http_post_2xx:
-    prober: http
-    timeout: 5s
-    http:
-      method: POST
-      headers:
-        Content-Type: application/json
-      body: '{}'
-  http_post_body_file:
-    prober: http
-    timeout: 5s
-    http:
-      method: POST
-      body_file: "/files/body.txt"
-  http_basic_auth_example:
-    prober: http
-    timeout: 5s
-    http:
-      method: POST
-      headers:
-        Host: "login.example.com"
-      basic_auth:
-        username: "username"
-        password: "mysecret"
-  http_2xx_oauth_client_credentials:
-    prober: http
-    timeout: 5s
-    http:
-      valid_http_versions: ["HTTP/1.1", "HTTP/2"]
       follow_redirects: true
       preferred_ip_protocol: "ip4"
-      valid_status_codes:
+      valid_status_codes: []  # Defaults to 2xx
-        - 200
-        - 201
-      oauth2:
-        client_id: "client_id"
-        client_secret: "client_secret"
-        token_url: "https://api.example.com/token"
-        endpoint_params:
-          grant_type: "client_credentials"
-  http_custom_ca_example:
-    prober: http
-    http:
       method: GET
-      tls_config:
-        ca_file: "/certs/my_cert.crt"
-  http_gzip:
-    prober: http
-    http:
-      method: GET
-      compression: gzip
-  http_gzip_with_accept_encoding:
-    prober: http
-    http:
-      method: GET
-      compression: gzip
-      headers:
-        Accept-Encoding: gzip
-  tls_connect:
-    prober: tcp
-    timeout: 5s
-    tcp:
-      tls: true
-  tcp_connect_example:
-    prober: tcp
-    timeout: 5s
-  imap_starttls:
-    prober: tcp
-    timeout: 5s
-    tcp:
-      query_response:
-        - expect: "OK.*STARTTLS"
-        - send: ". STARTTLS"
-        - expect: "OK"
-        - starttls: true
-        - send: ". capability"
-        - expect: "CAPABILITY IMAP4rev1"
-  smtp_starttls:
-    prober: tcp
-    timeout: 5s
-    tcp:
-      query_response:
-        - expect: "^220 ([^ ]+) ESMTP (.+)$"
-        - send: "EHLO prober\r"
-        - expect: "^250-STARTTLS"
-        - send: "STARTTLS\r"
-        - expect: "^220"
-        - starttls: true
-        - send: "EHLO prober\r"
-        - expect: "^250-AUTH"
-        - send: "QUIT\r"
-  irc_banner_example:
-    prober: tcp
-    timeout: 5s
-    tcp:
-      query_response:
-        - send: "NICK prober"
-        - send: "USER prober prober prober :prober"
-        - expect: "PING :([^ ]+)"
-          send: "PONG ${1}"
-        - expect: "^:[^ ]+ 001"
   icmp:
     prober: icmp
     timeout: 5s
     icmp:
       preferred_ip_protocol: "ip4"
-  dns_udp_example:
-    prober: dns
-    timeout: 5s
-    dns:
-      query_name: "www.prometheus.io"
-      query_type: "A"
-      valid_rcodes:
-        - NOERROR
-      validate_answer_rrs:
-        fail_if_matches_regexp:
-          - ".*127.0.0.1"
-        fail_if_all_match_regexp:
-          - ".*127.0.0.1"
-        fail_if_not_matches_regexp:
-          - "www.prometheus.io.\t300\tIN\tA\t127.0.0.1"
-        fail_if_none_matches_regexp:
-          - "127.0.0.1"
-      validate_authority_rrs:
-        fail_if_matches_regexp:
-          - ".*127.0.0.1"
-      validate_additional_rrs:
-        fail_if_matches_regexp:
-          - ".*127.0.0.1"
-  dns_soa:
-    prober: dns
-    dns:
-      query_name: "prometheus.io"
-      query_type: "SOA"
-  dns_tcp_example:
-    prober: dns
-    dns:
-      transport_protocol: "tcp" # defaults to "udp"
-      preferred_ip_protocol: "ip4" # defaults to "ip6"
-      query_name: "www.prometheus.io"

m/hut/configuration.nix

@@ -7,11 +7,9 @@
     ../module/ceph.nix
     ../module/debuginfod.nix
     ../module/emulation.nix
-    ../module/slurm-client.nix
     ./gitlab-runner.nix
     ./monitoring.nix
     ./nfs.nix
-    ./slurm-server.nix
     ./nix-serve.nix
     ./public-inbox.nix
     ./gitea.nix

m/hut/gpfs-probe.sh

@@ -2,20 +2,10 @@
 
 N=500
 
-t_proj=$(timeout 5 ssh bsc015557@glogin2.bsc.es "timeout 3 command time -f %e touch /gpfs/projects/bsc15/bsc015557/gpfs.{1..$N} 2>&1; rm -f /gpfs/projects/bsc15/bsc015557/gpfs.{1..$N}")
+t=$(timeout 5 ssh bsc015557@glogin2.bsc.es "timeout 3 command time -f %e touch /gpfs/projects/bsc15/bsc015557/gpfs.{1..$N} 2>&1; rm -f /gpfs/projects/bsc15/bsc015557/gpfs.{1..$N}")
-t_scratch=$(timeout 5 ssh bsc015557@glogin2.bsc.es "timeout 3 command time -f %e touch /gpfs/scratch/bsc15/rodrigo/probe/gpfs.{1..$N} 2>&1; rm -f /gpfs/scratch/bsc15/rodrigo/probe/gpfs.{1..$N}")
-t_home=$(timeout 5 ssh bsc015557@glogin2.bsc.es "timeout 3 command time -f %e touch /home/bsc/bsc015557/.gpfs/{1..$N} 2>&1; rm -f /home/bsc/bsc015557/.gpfs/{1..$N}")
 
-if [ -z "$t_proj" ]; then
+if [ -z "$t" ]; then
-  t_proj="5.00"
+  t="5.00"
-fi
-
-if [ -z "$t_scratch" ]; then
-  t_scratch="5.00"
-fi
-
-if [ -z "$t_home" ]; then
-  t_home="5.00"
 fi
 
 cat <<EOF
@@ -24,7 +14,5 @@ Content-Type: text/plain; version=0.0.4; charset=utf-8; escaping=values
 
 # HELP gpfs_touch_latency Time to create $N files.
 # TYPE gpfs_touch_latency gauge
-gpfs_touch_latency{partition="projects"} $t_proj
+gpfs_touch_latency $t
-gpfs_touch_latency{partition="home"} $t_home
-gpfs_touch_latency{partition="scratch"} $t_scratch
 EOF

m/hut/monitoring.nix

@@ -267,14 +267,6 @@
           }
         ];
       }
-      {
-        job_name = "tent";
-        static_configs = [
-          {
-            targets = [ "127.0.0.1:29002" ]; # Node exporter
-          }
-        ];
-      }
     ];
   };
 }

m/hut/nginx.nix

@@ -2,10 +2,13 @@
 let
   website = pkgs.stdenv.mkDerivation {
     name = "jungle-web";
-    src = theFlake;
+    src = pkgs.fetchgit {
+      url = "https://jungle.bsc.es/git/rarias/jungle-website.git";
+      rev = "739bf0175a7f05380fe7ad7023ff1d60db1710e1";
+      hash = "sha256-ea5DzhYTzZ9TmqD+x95rdNdLbxPnBluqlYH2NmBYmc4=";
+    };
     buildInputs = [ pkgs.hugo ];
     buildPhase = ''
-      cd web
       rm -rf public/
       hugo
     '';

m/hut/slurm-server.nix

@@ -1,7 +0,0 @@
-{ ... }:
-
-{
-  services.slurm = {
-    server.enable = true;
-  };
-}

m/hut/targets.yml

@@ -4,7 +4,7 @@
   - xeon03-ipmi
   - xeon04-ipmi
   - koro-ipmi
-  - xeon06-ipmi
+  - weasel-ipmi
   - hut-ipmi
   - eudy-ipmi
   # Storage

m/lake2/configuration.nix

@@ -4,6 +4,7 @@
   imports = [
     ../common/ssf.nix
     ../module/monitoring.nix
+    ../module/hut-substituter.nix
   ];
 
   boot.loader.grub.device = "/dev/disk/by-id/wwn-0x55cd2e414d53563a";

m/map.nix

@@ -6,7 +6,7 @@
     switch-opa = { pos=41; size=1; };
 
     # SSF login
-    ssfhead = { pos=39; size=2; label="SSFHEAD"; board="R2208WTTYSR"; contact="operations@bsc.es"; };
+    apex = { pos=39; size=2; label="SSFHEAD"; board="R2208WTTYSR"; contact="rodrigo.arias@bsc.es"; };
 
     # Storage
     bay   = { pos=38; size=1; label="MDS01"; board="S2600WT2R"; sn="BQWL64850303"; contact="rodrigo.arias@bsc.es"; };
@@ -19,7 +19,7 @@
     xeon03 = { pos=33; size=1; label="SSF-XEON03"; board="S2600WTTR"; sn="BQWL64750826"; contact="rodrigo.arias@bsc.es"; };
     # Slot 34 empty
     koro   = { pos=31; size=1; label="SSF-XEON05"; board="S2600WTTR"; sn="BQWL64954293"; contact="rodrigo.arias@bsc.es"; };
-    xeon06 = { pos=30; size=1; label="SSF-XEON06"; board="S2600WTTR"; sn="BQWL64750846"; contact="antoni.navarro@bsc.es"; };
+    weasel = { pos=30; size=1; label="SSF-XEON06"; board="S2600WTTR"; sn="BQWL64750846"; contact="antoni.navarro@bsc.es"; };
     hut    = { pos=29; size=1; label="SSF-XEON07"; board="S2600WTTR"; sn="BQWL64751184"; contact="rodrigo.arias@bsc.es"; };
     eudy   = { pos=28; size=1; label="SSF-XEON08"; board="S2600WTTR"; sn="BQWL64756586"; contact="aleix.rocanonell@bsc.es"; };
 

m/module/amd-uprof.nix

@@ -0,0 +1,49 @@
+{ config, lib, pkgs, ... }:
+
+{
+  options = {
+    services.amd-uprof = {
+      enable = lib.mkOption {
+        type = lib.types.bool;
+        default = false;
+        description = "Whether to enable AMD uProf.";
+      };
+    };
+  };
+
+  # Only setup amd-uprof if enabled
+  config = lib.mkIf config.services.amd-uprof.enable {
+
+    # First make sure that we add the module to the list of available modules
+    # in the kernel matching the same kernel version of this configuration.
+    boot.extraModulePackages = with config.boot.kernelPackages; [ amd-uprof-driver ];
+    boot.kernelModules = [ "AMDPowerProfiler" ];
+
+    # Make the userspace tools available in $PATH.
+    environment.systemPackages = with pkgs; [ amd-uprof ];
+
+    # The AMDPowerProfiler module doesn't create the /dev device nor it emits
+    # any uevents, so we cannot use udev rules to automatically create the
+    # device. Instead, we run a systemd unit that does it after loading the
+    # modules.
+    systemd.services.amd-uprof-device = {
+      description = "Create /dev/AMDPowerProfiler device";
+      after = [ "systemd-modules-load.service" ];
+      wantedBy = [ "multi-user.target" ];
+      unitConfig.ConditionPathExists = [
+          "/proc/AMDPowerProfiler/device"
+          "!/dev/AMDPowerProfiler"
+      ];
+      serviceConfig = {
+        Type = "oneshot";
+        RemainAfterExit = true;
+        ExecStart = pkgs.writeShellScript "add-amd-uprof-dev.sh" ''
+          mknod /dev/AMDPowerProfiler -m 666 c $(< /proc/AMDPowerProfiler/device) 0
+        '';
+        ExecStop = pkgs.writeShellScript "remove-amd-uprof-dev.sh" ''
+          rm -f /dev/AMDPowerProfiler
+        '';
+      };
+    };
+  };
+}

m/module/hut-substituter.nix

@@ -6,5 +6,8 @@
     {
       extra-substituters = [ "http://hut/cache" ];
       extra-trusted-public-keys = [ "jungle.bsc.es:pEc7MlAT0HEwLQYPtpkPLwRsGf80ZI26aj29zMw/HH0=" ];
+
+      # Set a low timeout in case hut is down
+      connect-timeout = 3; # seconds
     };
 }

m/module/nvidia.nix

@@ -0,0 +1,20 @@
+{ lib, config, pkgs, ... }:
+{
+  # Configure Nvidia driver to use with CUDA
+  hardware.nvidia.package = config.boot.kernelPackages.nvidiaPackages.production;
+  hardware.nvidia.open = lib.mkDefault (builtins.abort "hardware.nvidia.open not set");
+  hardware.graphics.enable = true;
+  nixpkgs.config.nvidia.acceptLicense = true;
+  services.xserver.videoDrivers = [ "nvidia" ];
+
+  # enable support for derivations which require nvidia-gpu to be available
+  # > requiredSystemFeatures = [ "cuda" ];
+  programs.nix-required-mounts.enable = true;
+  programs.nix-required-mounts.presets.nvidia-gpu.enable = true;
+  # They forgot to add the symlink
+  programs.nix-required-mounts.allowedPatterns.nvidia-gpu.paths = [
+    config.systemd.tmpfiles.settings.graphics-driver."/run/opengl-driver"."L+".argument
+  ];
+
+  environment.systemPackages = [ pkgs.cudainfo ];
+}

m/module/power-policy.nix

@@ -0,0 +1,33 @@
+{ config, lib, pkgs, ... }:
+
+with lib;
+
+let
+  cfg = config.power.policy;
+in
+{
+  options = {
+    power.policy = mkOption {
+      type = types.nullOr (types.enum [ "always-on" "previous" "always-off" ]);
+      default = null;
+      description = "Set power policy to use via IPMI.";
+    };
+  };
+
+  config = mkIf (cfg != null) {
+    systemd.services."power-policy" = {
+      description = "Set power policy to use via IPMI";
+      wantedBy = [ "multi-user.target" ];
+      unitConfig = {
+        StartLimitBurst = "10";
+        StartLimitIntervalSec = "10m";
+      };
+      serviceConfig = {
+        ExecStart = "${pkgs.ipmitool}/bin/ipmitool chassis policy ${cfg}";
+        Type = "oneshot";
+        Restart = "on-failure";
+        RestartSec = "5s";
+      };
+    };
+  };
+}

m/module/slurm-client.nix

@@ -1,33 +1,10 @@
-{ config, pkgs, lib, ... }:
+{ lib, ... }:
 
-let
+{
-  suspendProgram = pkgs.writeScript "suspend.sh" ''
+  imports = [
-    #!/usr/bin/env bash
+    ./slurm-common.nix
-    exec 1>>/var/log/power_save.log 2>>/var/log/power_save.log
+  ];
-    set -x
-    export "PATH=/run/current-system/sw/bin:$PATH"
-    echo "$(date) Suspend invoked $0 $*" >> /var/log/power_save.log
-    hosts=$(scontrol show hostnames $1)
-    for host in $hosts; do
-      echo Shutting down host: $host
-      ipmitool -I lanplus -H ''${host}-ipmi -P "" -U "" chassis power off
-    done
-  '';
 
-  resumeProgram = pkgs.writeScript "resume.sh" ''
-    #!/usr/bin/env bash
-    exec 1>>/var/log/power_save.log 2>>/var/log/power_save.log
-    set -x
-    export "PATH=/run/current-system/sw/bin:$PATH"
-    echo "$(date) Suspend invoked $0 $*" >> /var/log/power_save.log
-    hosts=$(scontrol show hostnames $1)
-    for host in $hosts; do
-      echo Starting host: $host
-      ipmitool -I lanplus -H ''${host}-ipmi -P "" -U "" chassis power on
-    done
-  '';
-
-in {
   systemd.services.slurmd.serviceConfig = {
     # Kill all processes in the control group on stop/restart. This will kill
     # all the jobs running, so ensure that we only upgrade when the nodes are
@@ -35,92 +12,13 @@ in {
     # https://github.com/NixOS/nixpkgs/commit/ae93ed0f0d4e7be0a286d1fca86446318c0c6ffb
     # https://bugs.schedmd.com/show_bug.cgi?id=2095#c24
     KillMode = lib.mkForce "control-group";
+
+    # If slurmd fails to contact the control server it will fail, causing the
+    # node to remain out of service until manually restarted. Always try to
+    # restart it.
+    Restart = "always";
+    RestartSec = "30s";
   };
 
-  services.slurm = {
+  services.slurm.client.enable = true;
-    client.enable = true;
-    controlMachine = "hut";
-    clusterName = "jungle";
-    nodeName = [
-      "owl[1,2]  Sockets=2 CoresPerSocket=14 ThreadsPerCore=2 Feature=owl"
-      "hut       Sockets=2 CoresPerSocket=14 ThreadsPerCore=2"
-    ];
-
-    partitionName = [
-      "owl Nodes=owl[1-2]     Default=YES DefaultTime=01:00:00 MaxTime=INFINITE State=UP"
-    ];
-
-    # See slurm.conf(5) for more details about these options.
-    extraConfig = ''
-      # Use PMIx for MPI by default. It works okay with MPICH and OpenMPI, but
-      # not with Intel MPI. For that use the compatibility shim libpmi.so
-      # setting I_MPI_PMI_LIBRARY=$pmix/lib/libpmi.so while maintaining the PMIx
-      # library in SLURM (--mpi=pmix). See more details here:
-      # https://pm.bsc.es/gitlab/rarias/jungle/-/issues/16
-      MpiDefault=pmix
-
-      # When a node reboots return that node to the slurm queue as soon as it
-      # becomes operative again.
-      ReturnToService=2
-
-      # Track all processes by using a cgroup
-      ProctrackType=proctrack/cgroup
-
-      # Enable task/affinity to allow the jobs to run in a specified subset of
-      # the resources. Use the task/cgroup plugin to enable process containment.
-      TaskPlugin=task/affinity,task/cgroup
-
-      # Power off unused nodes until they are requested
-      SuspendProgram=${suspendProgram}
-      SuspendTimeout=60
-      ResumeProgram=${resumeProgram}
-      ResumeTimeout=300
-      SuspendExcNodes=hut
-
-      # Turn the nodes off after 1 hour of inactivity
-      SuspendTime=3600
-
-      # Reduce port range so we can allow only this range in the firewall
-      SrunPortRange=60000-61000
-
-      # Use cores as consumable resources. In SLURM terms, a core may have
-      # multiple hardware threads (or CPUs).
-      SelectType=select/cons_tres
-
-      # Ignore memory constraints and only use unused cores to share a node with
-      # other jobs.
-      SelectTypeParameters=CR_Core
-
-      # Required for pam_slurm_adopt, see https://slurm.schedmd.com/pam_slurm_adopt.html
-      # This sets up the "extern" step into which ssh-launched processes will be
-      # adopted. Alloc runs the prolog at job allocation (salloc) rather than
-      # when a task runs (srun) so we can ssh early.
-      PrologFlags=Alloc,Contain,X11
-
-      # LaunchParameters=ulimit_pam_adopt will set RLIMIT_RSS in processes
-      # adopted by the external step, similar to tasks running in regular steps
-      # LaunchParameters=ulimit_pam_adopt
-      SlurmdDebug=debug5
-      #DebugFlags=Protocol,Cgroup
-    '';
-
-    extraCgroupConfig = ''
-      CgroupPlugin=cgroup/v2
-      #ConstrainCores=yes
-    '';
-  };
-
-  # Place the slurm config in /etc as this will be required by PAM
-  environment.etc.slurm.source = config.services.slurm.etcSlurm;
-
-  age.secrets.mungeKey = {
-    file = ../../secrets/munge-key.age;
-    owner = "munge";
-    group = "munge";
-  };
-
-  services.munge = {
-    enable = true;
-    password = config.age.secrets.mungeKey.path;
-  };
 }

m/module/slurm-common.nix

@@ -0,0 +1,115 @@
+{ config, pkgs, ... }:
+
+let
+  suspendProgram = pkgs.writeShellScript "suspend.sh" ''
+    exec 1>>/var/log/power_save.log 2>>/var/log/power_save.log
+    set -x
+    export "PATH=/run/current-system/sw/bin:$PATH"
+    echo "$(date) Suspend invoked $0 $*" >> /var/log/power_save.log
+    hosts=$(scontrol show hostnames $1)
+    for host in $hosts; do
+      echo Shutting down host: $host
+      ipmitool -I lanplus -H ''${host}-ipmi -P "" -U "" chassis power off
+    done
+  '';
+
+  resumeProgram = pkgs.writeShellScript "resume.sh" ''
+    exec 1>>/var/log/power_save.log 2>>/var/log/power_save.log
+    set -x
+    export "PATH=/run/current-system/sw/bin:$PATH"
+    echo "$(date) Suspend invoked $0 $*" >> /var/log/power_save.log
+    hosts=$(scontrol show hostnames $1)
+    for host in $hosts; do
+      echo Starting host: $host
+      ipmitool -I lanplus -H ''${host}-ipmi -P "" -U "" chassis power on
+    done
+  '';
+
+in {
+  services.slurm = {
+    controlMachine = "apex";
+    clusterName = "jungle";
+    nodeName = [
+      "owl[1,2]  Sockets=2 CoresPerSocket=14 ThreadsPerCore=2 Feature=owl"
+      "fox       Sockets=8 CoresPerSocket=24 ThreadsPerCore=1"
+    ];
+
+    partitionName = [
+      "owl Nodes=owl[1-2]     Default=YES DefaultTime=01:00:00 MaxTime=INFINITE State=UP"
+      "fox Nodes=fox          Default=NO  DefaultTime=01:00:00 MaxTime=INFINITE State=UP"
+    ];
+
+    # See slurm.conf(5) for more details about these options.
+    extraConfig = ''
+      # Use PMIx for MPI by default. It works okay with MPICH and OpenMPI, but
+      # not with Intel MPI. For that use the compatibility shim libpmi.so
+      # setting I_MPI_PMI_LIBRARY=$pmix/lib/libpmi.so while maintaining the PMIx
+      # library in SLURM (--mpi=pmix). See more details here:
+      # https://pm.bsc.es/gitlab/rarias/jungle/-/issues/16
+      MpiDefault=pmix
+
+      # When a node reboots return that node to the slurm queue as soon as it
+      # becomes operative again.
+      ReturnToService=2
+
+      # Track all processes by using a cgroup
+      ProctrackType=proctrack/cgroup
+
+      # Enable task/affinity to allow the jobs to run in a specified subset of
+      # the resources. Use the task/cgroup plugin to enable process containment.
+      TaskPlugin=task/affinity,task/cgroup
+
+      # Power off unused nodes until they are requested
+      SuspendProgram=${suspendProgram}
+      SuspendTimeout=60
+      ResumeProgram=${resumeProgram}
+      ResumeTimeout=300
+      SuspendExcNodes=fox
+
+      # Turn the nodes off after 1 hour of inactivity
+      SuspendTime=3600
+
+      # Reduce port range so we can allow only this range in the firewall
+      SrunPortRange=60000-61000
+
+      # Use cores as consumable resources. In SLURM terms, a core may have
+      # multiple hardware threads (or CPUs).
+      SelectType=select/cons_tres
+
+      # Ignore memory constraints and only use unused cores to share a node with
+      # other jobs.
+      SelectTypeParameters=CR_Core
+
+      # Required for pam_slurm_adopt, see https://slurm.schedmd.com/pam_slurm_adopt.html
+      # This sets up the "extern" step into which ssh-launched processes will be
+      # adopted. Alloc runs the prolog at job allocation (salloc) rather than
+      # when a task runs (srun) so we can ssh early.
+      PrologFlags=Alloc,Contain,X11
+
+      # LaunchParameters=ulimit_pam_adopt will set RLIMIT_RSS in processes
+      # adopted by the external step, similar to tasks running in regular steps
+      # LaunchParameters=ulimit_pam_adopt
+      SlurmdDebug=debug5
+      #DebugFlags=Protocol,Cgroup
+    '';
+
+    extraCgroupConfig = ''
+      CgroupPlugin=cgroup/v2
+      #ConstrainCores=yes
+    '';
+  };
+
+  # Place the slurm config in /etc as this will be required by PAM
+  environment.etc.slurm.source = config.services.slurm.etcSlurm;
+
+  age.secrets.mungeKey = {
+    file = ../../secrets/munge-key.age;
+    owner = "munge";
+    group = "munge";
+  };
+
+  services.munge = {
+    enable = true;
+    password = config.age.secrets.mungeKey.path;
+  };
+}

m/module/slurm-server.nix

@@ -0,0 +1,23 @@
+{ ... }:
+
+{
+  imports = [
+    ./slurm-common.nix
+  ];
+
+  services.slurm.server.enable = true;
+
+  networking.firewall = {
+    extraCommands = ''
+      # Accept slurm connections to controller from compute nodes
+      iptables -A nixos-fw -p tcp -s 10.0.40.0/24 --dport 6817 -j nixos-fw-accept
+      # Accept slurm connections from compute nodes for srun
+      iptables -A nixos-fw -p tcp -s 10.0.40.0/24 --dport 60000:61000 -j nixos-fw-accept
+
+      # Accept slurm connections to controller from fox (via wireguard)
+      iptables -A nixos-fw -p tcp -i wg0 -s 10.106.0.1/32 --dport 6817 -j nixos-fw-accept
+      # Accept slurm connections from fox for srun (via wireguard)
+      iptables -A nixos-fw -p tcp -i wg0 -s 10.106.0.1/32 --dport 60000:61000 -j nixos-fw-accept
+    '';
+  };
+}

m/module/ssh-hut-extern.nix

@@ -1,9 +0,0 @@
-{
-  programs.ssh.extraConfig = ''
-    Host ssfhead
-      HostName ssflogin.bsc.es
-    Host hut
-      ProxyJump ssfhead
-      HostName xeon07
-  '';
-}

m/raccoon/configuration.nix

@@ -3,10 +3,13 @@
 {
   imports = [
     ../common/base.nix
+    ../common/ssf/hosts.nix
     ../module/emulation.nix
     ../module/debuginfod.nix
-    ../module/ssh-hut-extern.nix
+    ../module/nvidia.nix
     ../eudy/kernel/perf.nix
+    ./wireguard.nix
+    ../module/hut-substituter.nix
   ];
 
   # Don't install Grub on the disk yet
@@ -38,26 +41,21 @@
     };
     hosts = {
       "10.0.44.4" = [ "tent" ];
+      "84.88.53.236" = [ "apex" ];
     };
   };
 
-  nix.settings = {
+  # Mount the NFS home
-    extra-substituters = [ "https://jungle.bsc.es/cache" ];
+  fileSystems."/nfs/home" = {
-    extra-trusted-public-keys = [ "jungle.bsc.es:pEc7MlAT0HEwLQYPtpkPLwRsGf80ZI26aj29zMw/HH0=" ];
+    device = "10.106.0.30:/home";
+    fsType = "nfs";
+    options = [ "nfsvers=3" "rsize=1024" "wsize=1024" "cto" "nofail" ];
   };
 
   # Enable performance governor
   powerManagement.cpuFreqGovernor = "performance";
 
-  # Configure Nvidia driver to use with CUDA
+  hardware.nvidia.open = false; # Maxwell is older than Turing architecture
-  hardware.nvidia.package = config.boot.kernelPackages.nvidiaPackages.production;
-  hardware.graphics.enable = true;
-  nixpkgs.config.allowUnfree = true;
-  nixpkgs.config.nvidia.acceptLicense = true;
-  services.xserver.videoDrivers = [ "nvidia" ];
-
-  # Disable garbage collection for now
-  nix.gc.automatic = lib.mkForce false;
 
   services.openssh.settings.X11Forwarding = true;
 

m/raccoon/wireguard.nix

@@ -0,0 +1,48 @@
+{ config, pkgs, ... }:
+
+{
+  networking.nat = {
+    enable = true;
+    enableIPv6 = false;
+    externalInterface = "eno0";
+    internalInterfaces = [ "wg0" ];
+  };
+
+  networking.firewall = {
+    allowedUDPPorts = [ 666 ];
+  };
+
+  age.secrets.wgRaccoon.file = ../../secrets/wg-raccoon.age;
+
+  # Enable WireGuard
+  networking.wireguard.enable = true;
+  networking.wireguard.interfaces = {
+    wg0 = {
+      ips = [ "10.106.0.236/24" ];
+      listenPort = 666;
+      privateKeyFile = config.age.secrets.wgRaccoon.path;
+      # Public key: QUfnGXSMEgu2bviglsaSdCjidB51oEDBFpnSFcKGfDI=
+      peers = [
+        {
+          name = "fox";
+          publicKey = "VfMPBQLQTKeyXJSwv8wBhc6OV0j2qAxUpX3kLHunK2Y=";
+          allowedIPs = [ "10.106.0.1/32" ];
+          endpoint = "fox.ac.upc.edu:666";
+          persistentKeepalive = 25;
+        }
+        {
+          name = "apex";
+          publicKey = "VwhcN8vSOzdJEotQTpmPHBC52x3Hbv1lkFIyKubrnUA=";
+          allowedIPs = [ "10.106.0.30/32" "10.0.40.0/24" ];
+          endpoint = "ssfhead.bsc.es:666";
+          persistentKeepalive = 25;
+        }
+      ];
+    };
+  };
+
+  networking.hosts = {
+    "10.106.0.1"  = [ "fox.wg" ];
+    "10.106.0.30" = [ "apex.wg" ];
+  };
+}

m/tent/configuration.nix

@@ -3,9 +3,9 @@
 {
   imports = [
     ../common/xeon.nix
+    ../common/ssf/hosts.nix
     ../module/emulation.nix
     ../module/debuginfod.nix
-    ../module/ssh-hut-extern.nix
     ./monitoring.nix
     ./nginx.nix
     ./nix-serve.nix
@@ -15,6 +15,7 @@
     ../hut/msmtp.nix
     ../module/p.nix
     ../module/vpn-dac.nix
+    ../module/hut-substituter.nix
   ];
 
   # Select the this using the ID to avoid mismatches
@@ -33,6 +34,10 @@
     nameservers = [ "84.88.52.35" "84.88.52.36" ];
     search = [ "bsc.es" "ac.upc.edu" ];
     defaultGateway = "10.0.44.1";
+    hosts = {
+      "84.88.53.236" = [ "apex" ];
+      "10.0.44.1" = [ "raccoon" ];
+    };
   };
 
   services.p.enable = true;

m/tent/nginx.nix

@@ -2,10 +2,13 @@
 let
   website = pkgs.stdenv.mkDerivation {
     name = "jungle-web";
-    src = theFlake;
+    src = pkgs.fetchgit {
+      url = "https://jungle.bsc.es/git/rarias/jungle-website.git";
+      rev = "739bf0175a7f05380fe7ad7023ff1d60db1710e1";
+      hash = "sha256-ea5DzhYTzZ9TmqD+x95rdNdLbxPnBluqlYH2NmBYmc4=";
+    };
     buildInputs = [ pkgs.hugo ];
     buildPhase = ''
-      cd web
       rm -rf public/
       hugo
     '';
@@ -67,6 +70,9 @@ in
         location /p/ {
           alias /var/lib/p/;
         }
+        location /pub/ {
+          alias /vault/pub/;
+        }
       '';
     };
   };

m/weasel/configuration.nix

@@ -0,0 +1,33 @@
+{ lib, ... }:
+
+{
+  imports = [
+    ../common/ssf.nix
+    ../module/hut-substituter.nix
+  ];
+
+  # Select this using the ID to avoid mismatches
+  boot.loader.grub.device = "/dev/disk/by-id/wwn-0x55cd2e414d5356ca";
+
+  # No swap, there is plenty of RAM
+  swapDevices = lib.mkForce [];
+
+  # Users with sudo access
+  users.groups.wheel.members = [ "abonerib" "anavarro" ];
+
+  # Run julia installed with juliaup using julia's own libraries:
+  # NIX_LD_LIBRARY_PATH=~/.julia/juliaup/${VERS}/lib/julia ~/.juliaup/bin/julia
+  programs.nix-ld.enable = true;
+
+  networking = {
+    hostName = "weasel";
+    interfaces.eno1.ipv4.addresses = [ {
+      address = "10.0.40.6";
+      prefixLength = 24;
+    } ];
+    interfaces.ibp5s0.ipv4.addresses = [ {
+      address = "10.0.42.6";
+      prefixLength = 24;
+    } ];
+  };
+}

pkgs/amd-uprof/default.nix

@@ -0,0 +1,89 @@
+{ stdenv
+, lib
+, curl
+, cacert
+, runCommandLocal
+, autoPatchelfHook
+, elfutils
+, glib
+, libGL
+, ncurses5
+, xorg
+, zlib
+, libxkbcommon
+, freetype
+, fontconfig
+, libGLU
+, dbus
+, rocmPackages
+, libxcrypt-legacy
+, numactl
+, radare2
+}:
+
+let
+  version = "5.1.701";
+  tarball = "AMDuProf_Linux_x64_${version}.tar.bz2";
+
+  # NOTE: Remember to update the radare2 patch below if AMDuProfPcm changes.
+  uprofSrc = runCommandLocal tarball {
+    nativeBuildInputs = [ curl ];
+    outputHash = "sha256-j9gxcBcIg6Zhc5FglUXf/VV9bKSo+PAKeootbN7ggYk=";
+    SSL_CERT_FILE="${cacert}/etc/ssl/certs/ca-bundle.crt";
+  } ''
+    curl \
+    -o $out \
+    'https://download.amd.com/developer/eula/uprof/uprof-5-1/${tarball}' \
+    -H 'User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:139.0) Gecko/20100101 Firefox/139.0' \
+    -H 'Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8' \
+    -H 'Accept-Language: en-US,en;q=0.5' \
+    -H 'Accept-Encoding: gzip, deflate, br, zstd' \
+    -H 'Referer: https://www.amd.com/' 2>&1 | tr '\r' '\n'
+  '';
+
+in
+  stdenv.mkDerivation {
+    pname = "AMD-uProf";
+    inherit version;
+    src = uprofSrc;
+    dontStrip = true;
+    phases = [ "installPhase" "fixupPhase" ];
+    nativeBuildInputs = [ autoPatchelfHook radare2 ];
+    buildInputs = [
+      stdenv.cc.cc.lib
+      ncurses5
+      elfutils
+      glib
+      libGL
+      libGLU
+      libxcrypt-legacy
+      xorg.libX11
+      xorg.libXext
+      xorg.libXi
+      xorg.libXmu
+      xorg.libxcb
+      xorg.xcbutilwm
+      xorg.xcbutilrenderutil
+      xorg.xcbutilkeysyms
+      xorg.xcbutilimage
+      fontconfig.lib
+      libxkbcommon
+      zlib
+      freetype
+      dbus
+      rocmPackages.rocprofiler
+      numactl
+    ];
+    installPhase = ''
+      set -x
+      mkdir -p $out
+      tar -x -v -C $out --strip-components=1 -f $src
+      rm $out/bin/AMDPowerProfilerDriverSource.tar.gz
+      patchelf --replace-needed libroctracer64.so.1 libroctracer64.so $out/bin/ProfileAgents/x64/libAMDGpuAgent.so
+      patchelf --add-needed libcrypt.so.1 --add-needed libstdc++.so.6 $out/bin/AMDuProfSys
+      echo "16334a51fcc48668307ad94e20482ca4  $out/bin/AMDuProfPcm" | md5sum -c -
+      radare2 -w -q -i ${./libnuma.r2} $out/bin/AMDuProfPcm
+      patchelf --add-needed libnuma.so $out/bin/AMDuProfPcm
+      set +x
+    '';
+  }

pkgs/amd-uprof/driver.nix

@@ -0,0 +1,33 @@
+{ stdenv
+, lib
+, amd-uprof
+, kernel
+, runCommandLocal
+}:
+
+let
+  version = amd-uprof.version;
+  tarball = amd-uprof.src;
+in stdenv.mkDerivation {
+  pname = "AMDPowerProfilerDriver";
+  inherit version;
+  src = runCommandLocal "AMDPowerProfilerDriverSource.tar.gz" { } ''
+    set -x
+    tar -x -f ${tarball} AMDuProf_Linux_x64_${version}/bin/AMDPowerProfilerDriverSource.tar.gz
+    mv AMDuProf_Linux_x64_${version}/bin/AMDPowerProfilerDriverSource.tar.gz $out
+    set +x
+  '';
+  hardeningDisable = [ "pic" "format" ];
+  nativeBuildInputs = kernel.moduleBuildDependencies;
+  patches = [ ./makefile.patch ./hrtimer.patch ];
+  makeFlags = [
+    "KERNEL_VERSION=${kernel.modDirVersion}"
+    "KERNEL_DIR=${kernel.dev}/lib/modules/${kernel.modDirVersion}/build"
+    "INSTALL_MOD_PATH=$(out)"
+  ];
+  meta = {
+    description = "AMD Power Profiler Driver";
+    homepage = "https://www.amd.com/es/developer/uprof.html";
+    platforms = lib.platforms.linux;
+  };
+}

pkgs/amd-uprof/hrtimer.patch

@@ -0,0 +1,31 @@
+--- a/src/PmcTimerConfig.c	2025-09-04 12:17:16.771707049 +0200
++++ b/src/PmcTimerConfig.c	2025-09-04 12:17:04.878515468 +0200
+@@ -99,7 +99,7 @@ static void PmcInitTimer(void* pInfo)
+ 
+     DRVPRINT("pTimerConfig(%p)", pTimerConfig);
+ 
+-    hrtimer_init(&pTimerConfig->m_hrTimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL_PINNED);
++    hrtimer_setup(&pTimerConfig->m_hrTimer, PmcTimerCallback, CLOCK_MONOTONIC, HRTIMER_MODE_REL_PINNED);
+ }
+ 
+ int PmcSetupTimer(ClientContext* pClientCtx)
+@@ -157,7 +157,6 @@ int PmcSetupTimer(ClientContext* pClient
+                 {
+                     /* Interval in ms */
+                     pTimerConfig->m_time = ktime_set(interval / 1000, interval * 1000000);
+-                    pTimerConfig->m_hrTimer.function = PmcTimerCallback;
+ 
+                     DRVPRINT("retVal(%d) m_time(%lld)", retVal, (long long int) pTimerConfig->m_time);
+                 }
+--- a/src/PwrProfTimer.c	2025-09-04 12:18:08.750544327 +0200
++++ b/src/PwrProfTimer.c	2025-09-04 12:18:28.557863382 +0200
+@@ -573,8 +573,7 @@ void InitHrTimer(uint32 cpu)
+     pCoreClientData = &per_cpu(g_coreClientData, cpu);
+ 
+     // initialize HR timer
+-    hrtimer_init(&pCoreClientData->m_hrTimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL_PINNED);
+-    pCoreClientData->m_hrTimer.function = &HrTimerCallback;
++    hrtimer_setup(&pCoreClientData->m_hrTimer, &HrTimerCallback, CLOCK_MONOTONIC, HRTIMER_MODE_REL_PINNED);
+ 
+     return;
+ } // InitHrTimer

pkgs/amd-uprof/libnuma.r2

@@ -0,0 +1,10 @@
+# Patch arguments to call sym std::string::find(char const*, unsigned long, unsigned long)
+# so it matches NixOS:
+#
+# Change OS name to NixOS
+wz NixOS @ 0x00550a43
+# And set the length to 5 characters
+wa mov ecx, 5 @0x00517930
+#
+# Then change the argument to dlopen() so it only uses libnuma.so
+wz libnuma.so @ 0x00562940

pkgs/amd-uprof/makefile.patch

@@ -0,0 +1,66 @@
+--- a/Makefile	2025-06-19 20:36:49.346693267 +0200
++++ b/Makefile	2025-06-19 20:42:29.778088660 +0200
+@@ -27,7 +27,7 @@ MODULE_VERSION=$(shell cat AMDPowerProfi
+ MODULE_NAME_KO=$(MODULE_NAME).ko
+ 
+ # check is module inserted
+-MODPROBE_OUTPUT=$(shell lsmod | grep $(MODULE_NAME))
++#MODPROBE_OUTPUT=$(shell lsmod | grep $(MODULE_NAME))
+ 
+ # check pcore dkms status
+ PCORE_DKMS_STATUS=$(shell dkms status | grep $(MODULE_NAME) | grep $(MODULE_VERSION))
+@@ -50,7 +50,7 @@ endif
+ # “-Wno-missing-attributes” is added for GCC version >= 9.0 and kernel version <= 5.00
+ G_VERSION=9
+ K_VERSION=5
+-KERNEL_MAJOR_VERSION=$(shell uname -r | cut -f1 -d.)
++KERNEL_MAJOR_VERSION=$(shell echo "$(KERNEL_VERSION)" | cut -f1 -d.)
+ GCCVERSION = $(shell gcc -dumpversion | cut -f1 -d.)
+ ifeq ($(G_VERSION),$(firstword $(sort $(GCCVERSION) $(G_VERSION))))
+ 	ifeq ($(K_VERSION),$(lastword $(sort $(KERNEL_MAJOR_VERSION) $(K_VERSION))))
+@@ -66,17 +66,7 @@ ${MODULE_NAME}-objs :=  src/PmcDataBuffe
+ 
+ # make
+ all:
+-	@chmod a+x ./AMDPPcert.sh
+-	@./AMDPPcert.sh 0 1; echo $$? > $(PWD)/sign_status;
+-	@SIGSTATUS1=`cat $(PWD)/sign_status | tr -d '\n'`; \
+-                if [ $$SIGSTATUS1 -eq 1 ]; then \
+-			exit 1; \
+-		fi
+-	@make -C /lib/modules/$(KERNEL_VERSION)/build M=$(PWD) $(MAKE_OPTS) EXTRA_CFLAGS="$(EXTRA_CFLAGS)" modules
+-	@SIGSTATUS3=`cat $(PWD)/sign_status | tr -d '\n'`; \
+-                if [ $$SIGSTATUS3 -eq 0 ]; then \
+-			./AMDPPcert.sh 1 $(MODULE_NAME_KO); \
+-		fi
++	make -C $(KERNEL_DIR) M=$(PWD) $(MAKE_OPTS) CFLAGS_MODULE="$(EXTRA_CFLAGS)" modules
+ 
+ # make clean
+ clean:
+@@ -84,23 +74,9 @@ clean:
+ 
+ # make install
+ install:
+-	@mkdir -p /lib/modules/`uname -r`/kernel/drivers/extra
+-	@rm  -f /lib/modules/`uname -r`/kernel/drivers/extra/$(MODULE_NAME_KO)
+-	@cp $(MODULE_NAME_KO) /lib/modules/`uname -r`/kernel/drivers/extra/
+-	@depmod -a
+-	@if [ ! -z "$(MODPROBE_OUTPUT)" ]; then \
+-		echo "Uninstalling AMDPowerProfiler Linux kernel module.";\
+-		rmmod $(MODULE_NAME);\
+-	fi
+-	@modprobe $(MODULE_NAME) 2> $(PWD)/sign_status1; \
+-		cat $(PWD)/sign_status1 | grep "Key was rejected by service"; \
+-		echo $$? > $(PWD)/sign_status; SIGSTATUS1=`cat $(PWD)/sign_status | tr -d '\n'`; \
+-                if [ $$SIGSTATUS1 -eq 0 ]; then \
+-			echo "ERROR: Secure Boot enabled, correct key is not yet enrolled in BIOS key table"; \
+-			exit 1; \
+-		else \
+-			cat $(PWD)/sign_status1; \
+-		fi
++	mkdir -p $(INSTALL_MOD_PATH)/lib/modules/$(KERNEL_VERSION)/kernel/drivers/extra/
++	cp -a $(MODULE_NAME_KO) $(INSTALL_MOD_PATH)/lib/modules/$(KERNEL_VERSION)/kernel/drivers/extra/
++
+ # make dkms
+ dkms:
+ 	@chmod a+x ./AMDPPcert.sh

pkgs/cudainfo/Makefile

@@ -0,0 +1,12 @@
+HOSTCXX  ?= g++
+NVCC     := nvcc -ccbin $(HOSTCXX)
+CXXFLAGS := -m64
+
+# Target rules
+all: cudainfo
+
+cudainfo: cudainfo.cpp
+	$(NVCC) $(CXXFLAGS) -o $@ $<
+
+clean:
+	rm -f cudainfo cudainfo.o

pkgs/cudainfo/cudainfo.cpp

@@ -0,0 +1,600 @@
+/*
+ * Copyright 1993-2015 NVIDIA Corporation.  All rights reserved.
+ *
+ * Please refer to the NVIDIA end user license agreement (EULA) associated
+ * with this source code for terms and conditions that govern your use of
+ * this software. Any use, reproduction, disclosure, or distribution of
+ * this software and related documentation outside the terms of the EULA
+ * is strictly prohibited.
+ *
+ */
+/* This sample queries the properties of the CUDA devices present in the system via CUDA Runtime API. */
+
+// Shared Utilities (QA Testing)
+
+// std::system includes
+#include <memory>
+#include <iostream>
+
+#include <cuda_runtime.h>
+
+// This will output the proper CUDA error strings in the event that a CUDA host call returns an error
+#define checkCudaErrors(val)           check ( (val), #val, __FILE__, __LINE__ )
+
+// CUDA Runtime error messages
+#ifdef __DRIVER_TYPES_H__
+static const char *_cudaGetErrorEnum(cudaError_t error)
+{
+    switch (error)
+    {
+        case cudaSuccess:
+            return "cudaSuccess";
+
+        case cudaErrorMissingConfiguration:
+            return "cudaErrorMissingConfiguration";
+
+        case cudaErrorMemoryAllocation:
+            return "cudaErrorMemoryAllocation";
+
+        case cudaErrorInitializationError:
+            return "cudaErrorInitializationError";
+
+        case cudaErrorLaunchFailure:
+            return "cudaErrorLaunchFailure";
+
+        case cudaErrorPriorLaunchFailure:
+            return "cudaErrorPriorLaunchFailure";
+
+        case cudaErrorLaunchTimeout:
+            return "cudaErrorLaunchTimeout";
+
+        case cudaErrorLaunchOutOfResources:
+            return "cudaErrorLaunchOutOfResources";
+
+        case cudaErrorInvalidDeviceFunction:
+            return "cudaErrorInvalidDeviceFunction";
+
+        case cudaErrorInvalidConfiguration:
+            return "cudaErrorInvalidConfiguration";
+
+        case cudaErrorInvalidDevice:
+            return "cudaErrorInvalidDevice";
+
+        case cudaErrorInvalidValue:
+            return "cudaErrorInvalidValue";
+
+        case cudaErrorInvalidPitchValue:
+            return "cudaErrorInvalidPitchValue";
+
+        case cudaErrorInvalidSymbol:
+            return "cudaErrorInvalidSymbol";
+
+        case cudaErrorMapBufferObjectFailed:
+            return "cudaErrorMapBufferObjectFailed";
+
+        case cudaErrorUnmapBufferObjectFailed:
+            return "cudaErrorUnmapBufferObjectFailed";
+
+        case cudaErrorInvalidHostPointer:
+            return "cudaErrorInvalidHostPointer";
+
+        case cudaErrorInvalidDevicePointer:
+            return "cudaErrorInvalidDevicePointer";
+
+        case cudaErrorInvalidTexture:
+            return "cudaErrorInvalidTexture";
+
+        case cudaErrorInvalidTextureBinding:
+            return "cudaErrorInvalidTextureBinding";
+
+        case cudaErrorInvalidChannelDescriptor:
+            return "cudaErrorInvalidChannelDescriptor";
+
+        case cudaErrorInvalidMemcpyDirection:
+            return "cudaErrorInvalidMemcpyDirection";
+
+        case cudaErrorAddressOfConstant:
+            return "cudaErrorAddressOfConstant";
+
+        case cudaErrorTextureFetchFailed:
+            return "cudaErrorTextureFetchFailed";
+
+        case cudaErrorTextureNotBound:
+            return "cudaErrorTextureNotBound";
+
+        case cudaErrorSynchronizationError:
+            return "cudaErrorSynchronizationError";
+
+        case cudaErrorInvalidFilterSetting:
+            return "cudaErrorInvalidFilterSetting";
+
+        case cudaErrorInvalidNormSetting:
+            return "cudaErrorInvalidNormSetting";
+
+        case cudaErrorMixedDeviceExecution:
+            return "cudaErrorMixedDeviceExecution";
+
+        case cudaErrorCudartUnloading:
+            return "cudaErrorCudartUnloading";
+
+        case cudaErrorUnknown:
+            return "cudaErrorUnknown";
+
+        case cudaErrorNotYetImplemented:
+            return "cudaErrorNotYetImplemented";
+
+        case cudaErrorMemoryValueTooLarge:
+            return "cudaErrorMemoryValueTooLarge";
+
+        case cudaErrorInvalidResourceHandle:
+            return "cudaErrorInvalidResourceHandle";
+
+        case cudaErrorNotReady:
+            return "cudaErrorNotReady";
+
+        case cudaErrorInsufficientDriver:
+            return "cudaErrorInsufficientDriver";
+
+        case cudaErrorSetOnActiveProcess:
+            return "cudaErrorSetOnActiveProcess";
+
+        case cudaErrorInvalidSurface:
+            return "cudaErrorInvalidSurface";
+
+        case cudaErrorNoDevice:
+            return "cudaErrorNoDevice";
+
+        case cudaErrorECCUncorrectable:
+            return "cudaErrorECCUncorrectable";
+
+        case cudaErrorSharedObjectSymbolNotFound:
+            return "cudaErrorSharedObjectSymbolNotFound";
+
+        case cudaErrorSharedObjectInitFailed:
+            return "cudaErrorSharedObjectInitFailed";
+
+        case cudaErrorUnsupportedLimit:
+            return "cudaErrorUnsupportedLimit";
+
+        case cudaErrorDuplicateVariableName:
+            return "cudaErrorDuplicateVariableName";
+
+        case cudaErrorDuplicateTextureName:
+            return "cudaErrorDuplicateTextureName";
+
+        case cudaErrorDuplicateSurfaceName:
+            return "cudaErrorDuplicateSurfaceName";
+
+        case cudaErrorDevicesUnavailable:
+            return "cudaErrorDevicesUnavailable";
+
+        case cudaErrorInvalidKernelImage:
+            return "cudaErrorInvalidKernelImage";
+
+        case cudaErrorNoKernelImageForDevice:
+            return "cudaErrorNoKernelImageForDevice";
+
+        case cudaErrorIncompatibleDriverContext:
+            return "cudaErrorIncompatibleDriverContext";
+
+        case cudaErrorPeerAccessAlreadyEnabled:
+            return "cudaErrorPeerAccessAlreadyEnabled";
+
+        case cudaErrorPeerAccessNotEnabled:
+            return "cudaErrorPeerAccessNotEnabled";
+
+        case cudaErrorDeviceAlreadyInUse:
+            return "cudaErrorDeviceAlreadyInUse";
+
+        case cudaErrorProfilerDisabled:
+            return "cudaErrorProfilerDisabled";
+
+        case cudaErrorProfilerNotInitialized:
+            return "cudaErrorProfilerNotInitialized";
+
+        case cudaErrorProfilerAlreadyStarted:
+            return "cudaErrorProfilerAlreadyStarted";
+
+        case cudaErrorProfilerAlreadyStopped:
+            return "cudaErrorProfilerAlreadyStopped";
+
+        /* Since CUDA 4.0*/
+        case cudaErrorAssert:
+            return "cudaErrorAssert";
+
+        case cudaErrorTooManyPeers:
+            return "cudaErrorTooManyPeers";
+
+        case cudaErrorHostMemoryAlreadyRegistered:
+            return "cudaErrorHostMemoryAlreadyRegistered";
+
+        case cudaErrorHostMemoryNotRegistered:
+            return "cudaErrorHostMemoryNotRegistered";
+
+        /* Since CUDA 5.0 */
+        case cudaErrorOperatingSystem:
+            return "cudaErrorOperatingSystem";
+
+        case cudaErrorPeerAccessUnsupported:
+            return "cudaErrorPeerAccessUnsupported";
+
+        case cudaErrorLaunchMaxDepthExceeded:
+            return "cudaErrorLaunchMaxDepthExceeded";
+
+        case cudaErrorLaunchFileScopedTex:
+            return "cudaErrorLaunchFileScopedTex";
+
+        case cudaErrorLaunchFileScopedSurf:
+            return "cudaErrorLaunchFileScopedSurf";
+
+        case cudaErrorSyncDepthExceeded:
+            return "cudaErrorSyncDepthExceeded";
+
+        case cudaErrorLaunchPendingCountExceeded:
+            return "cudaErrorLaunchPendingCountExceeded";
+
+        case cudaErrorNotPermitted:
+            return "cudaErrorNotPermitted";
+
+        case cudaErrorNotSupported:
+            return "cudaErrorNotSupported";
+
+        /* Since CUDA 6.0 */
+        case cudaErrorHardwareStackError:
+            return "cudaErrorHardwareStackError";
+
+        case cudaErrorIllegalInstruction:
+            return "cudaErrorIllegalInstruction";
+
+        case cudaErrorMisalignedAddress:
+            return "cudaErrorMisalignedAddress";
+
+        case cudaErrorInvalidAddressSpace:
+            return "cudaErrorInvalidAddressSpace";
+
+        case cudaErrorInvalidPc:
+            return "cudaErrorInvalidPc";
+
+        case cudaErrorIllegalAddress:
+            return "cudaErrorIllegalAddress";
+
+        /* Since CUDA 6.5*/
+        case cudaErrorInvalidPtx:
+            return "cudaErrorInvalidPtx";
+
+        case cudaErrorInvalidGraphicsContext:
+            return "cudaErrorInvalidGraphicsContext";
+
+        case cudaErrorStartupFailure:
+            return "cudaErrorStartupFailure";
+
+        case cudaErrorApiFailureBase:
+            return "cudaErrorApiFailureBase";
+    }
+
+    return "<unknown>";
+}
+#endif
+
+template< typename T >
+void check(T result, char const *const func, const char *const file, int const line)
+{
+    if (result)
+    {
+        fprintf(stderr, "CUDA error at %s:%d code=%d(%s) \"%s\" \n",
+                file, line, static_cast<unsigned int>(result), _cudaGetErrorEnum(result), func);
+        cudaDeviceReset();
+        // Make sure we call CUDA Device Reset before exiting
+        exit(EXIT_FAILURE);
+    }
+}
+
+int *pArgc = NULL;
+char **pArgv = NULL;
+
+#if CUDART_VERSION < 5000
+
+// CUDA-C includes
+#include <cuda.h>
+
+// This function wraps the CUDA Driver API into a template function
+template <class T>
+inline void getCudaAttribute(T *attribute, CUdevice_attribute device_attribute, int device)
+{
+    CUresult error =    cuDeviceGetAttribute(attribute, device_attribute, device);
+
+    if (CUDA_SUCCESS != error) {
+        fprintf(stderr, "cuSafeCallNoSync() Driver API error = %04d from file <%s>, line %i.\n",
+                error, __FILE__, __LINE__);
+
+        // cudaDeviceReset causes the driver to clean up all state. While
+        // not mandatory in normal operation, it is good practice.  It is also
+        // needed to ensure correct operation when the application is being
+        // profiled. Calling cudaDeviceReset causes all profile data to be
+        // flushed before the application exits
+        cudaDeviceReset();
+        exit(EXIT_FAILURE);
+    }
+}
+
+#endif /* CUDART_VERSION < 5000 */
+
+// Beginning of GPU Architecture definitions
+inline int ConvertSMVer2Cores(int major, int minor)
+{
+    // Defines for GPU Architecture types (using the SM version to determine the # of cores per SM
+    typedef struct {
+        int SM; // 0xMm (hexidecimal notation), M = SM Major version, and m = SM minor version
+        int Cores;
+    } sSMtoCores;
+
+    sSMtoCores nGpuArchCoresPerSM[] = {
+        { 0x20, 32 }, // Fermi Generation (SM 2.0) GF100 class
+        { 0x21, 48 }, // Fermi Generation (SM 2.1) GF10x class
+        { 0x30, 192}, // Kepler Generation (SM 3.0) GK10x class
+        { 0x32, 192}, // Kepler Generation (SM 3.2) GK10x class
+        { 0x35, 192}, // Kepler Generation (SM 3.5) GK11x class
+        { 0x37, 192}, // Kepler Generation (SM 3.7) GK21x class
+        { 0x50, 128}, // Maxwell Generation (SM 5.0) GM10x class
+        { 0x52, 128}, // Maxwell Generation (SM 5.2) GM20x class
+        {   -1, -1 }
+    };
+
+    int index = 0;
+
+    while (nGpuArchCoresPerSM[index].SM != -1) {
+        if (nGpuArchCoresPerSM[index].SM == ((major << 4) + minor)) {
+            return nGpuArchCoresPerSM[index].Cores;
+        }
+
+        index++;
+    }
+
+    // If we don't find the values, we default use the previous one to run properly
+    printf("MapSMtoCores for SM %d.%d is undefined.  Default to use %d Cores/SM\n", major, minor, nGpuArchCoresPerSM[index-1].Cores);
+    return nGpuArchCoresPerSM[index-1].Cores;
+}
+
+////////////////////////////////////////////////////////////////////////////////
+// Program main
+////////////////////////////////////////////////////////////////////////////////
+int
+main(int argc, char **argv)
+{
+    pArgc = &argc;
+    pArgv = argv;
+
+    printf("%s Starting...\n\n", argv[0]);
+    printf(" CUDA Device Query (Runtime API) version (CUDART static linking)\n\n");
+
+    int deviceCount = 0;
+    cudaError_t error_id = cudaGetDeviceCount(&deviceCount);
+
+    if (error_id != cudaSuccess) {
+        printf("cudaGetDeviceCount failed: %s (%d)\n",
+			cudaGetErrorString(error_id), (int) error_id);
+        printf("Result = FAIL\n");
+        exit(EXIT_FAILURE);
+    }
+
+    // This function call returns 0 if there are no CUDA capable devices.
+    if (deviceCount == 0)
+        printf("There are no available device(s) that support CUDA\n");
+    else
+        printf("Detected %d CUDA Capable device(s)\n", deviceCount);
+
+    int dev, driverVersion = 0, runtimeVersion = 0;
+
+    for (dev = 0; dev < deviceCount; ++dev) {
+        cudaSetDevice(dev);
+        cudaDeviceProp deviceProp;
+        cudaGetDeviceProperties(&deviceProp, dev);
+
+        printf("\nDevice %d: \"%s\"\n", dev, deviceProp.name);
+
+        // Console log
+        cudaDriverGetVersion(&driverVersion);
+        cudaRuntimeGetVersion(&runtimeVersion);
+        printf("  CUDA Driver Version / Runtime Version          %d.%d / %d.%d\n", driverVersion/1000, (driverVersion%100)/10, runtimeVersion/1000, (runtimeVersion%100)/10);
+        printf("  CUDA Capability Major/Minor version number:    %d.%d\n", deviceProp.major, deviceProp.minor);
+
+        printf("  Total amount of global memory:                 %.0f MBytes (%llu bytes)\n",
+                (float)deviceProp.totalGlobalMem/1048576.0f, (unsigned long long) deviceProp.totalGlobalMem);
+
+        printf("  (%2d) Multiprocessors, (%3d) CUDA Cores/MP:     %d CUDA Cores\n",
+               deviceProp.multiProcessorCount,
+               ConvertSMVer2Cores(deviceProp.major, deviceProp.minor),
+               ConvertSMVer2Cores(deviceProp.major, deviceProp.minor) * deviceProp.multiProcessorCount);
+        printf("  GPU Max Clock rate:                            %.0f MHz (%0.2f GHz)\n", deviceProp.clockRate * 1e-3f, deviceProp.clockRate * 1e-6f);
+
+
+#if CUDART_VERSION >= 5000
+        // This is supported in CUDA 5.0 (runtime API device properties)
+        printf("  Memory Clock rate:                             %.0f Mhz\n", deviceProp.memoryClockRate * 1e-3f);
+        printf("  Memory Bus Width:                              %d-bit\n",   deviceProp.memoryBusWidth);
+
+        if (deviceProp.l2CacheSize) {
+            printf("  L2 Cache Size:                                 %d bytes\n", deviceProp.l2CacheSize);
+        }
+
+#else
+        // This only available in CUDA 4.0-4.2 (but these were only exposed in the CUDA Driver API)
+        int memoryClock;
+        getCudaAttribute<int>(&memoryClock, CU_DEVICE_ATTRIBUTE_MEMORY_CLOCK_RATE, dev);
+        printf("  Memory Clock rate:                             %.0f Mhz\n", memoryClock * 1e-3f);
+        int memBusWidth;
+        getCudaAttribute<int>(&memBusWidth, CU_DEVICE_ATTRIBUTE_GLOBAL_MEMORY_BUS_WIDTH, dev);
+        printf("  Memory Bus Width:                              %d-bit\n", memBusWidth);
+        int L2CacheSize;
+        getCudaAttribute<int>(&L2CacheSize, CU_DEVICE_ATTRIBUTE_L2_CACHE_SIZE, dev);
+
+        if (L2CacheSize) {
+            printf("  L2 Cache Size:                                 %d bytes\n", L2CacheSize);
+        }
+
+#endif
+
+        printf("  Maximum Texture Dimension Size (x,y,z)         1D=(%d), 2D=(%d, %d), 3D=(%d, %d, %d)\n",
+               deviceProp.maxTexture1D   , deviceProp.maxTexture2D[0], deviceProp.maxTexture2D[1],
+               deviceProp.maxTexture3D[0], deviceProp.maxTexture3D[1], deviceProp.maxTexture3D[2]);
+        printf("  Maximum Layered 1D Texture Size, (num) layers  1D=(%d), %d layers\n",
+               deviceProp.maxTexture1DLayered[0], deviceProp.maxTexture1DLayered[1]);
+        printf("  Maximum Layered 2D Texture Size, (num) layers  2D=(%d, %d), %d layers\n",
+               deviceProp.maxTexture2DLayered[0], deviceProp.maxTexture2DLayered[1], deviceProp.maxTexture2DLayered[2]);
+
+
+        printf("  Total amount of constant memory:               %lu bytes\n", deviceProp.totalConstMem);
+        printf("  Total amount of shared memory per block:       %lu bytes\n", deviceProp.sharedMemPerBlock);
+        printf("  Total number of registers available per block: %d\n", deviceProp.regsPerBlock);
+        printf("  Warp size:                                     %d\n", deviceProp.warpSize);
+        printf("  Maximum number of threads per multiprocessor:  %d\n", deviceProp.maxThreadsPerMultiProcessor);
+        printf("  Maximum number of threads per block:           %d\n", deviceProp.maxThreadsPerBlock);
+        printf("  Max dimension size of a thread block (x,y,z): (%d, %d, %d)\n",
+               deviceProp.maxThreadsDim[0],
+               deviceProp.maxThreadsDim[1],
+               deviceProp.maxThreadsDim[2]);
+        printf("  Max dimension size of a grid size    (x,y,z): (%d, %d, %d)\n",
+               deviceProp.maxGridSize[0],
+               deviceProp.maxGridSize[1],
+               deviceProp.maxGridSize[2]);
+        printf("  Maximum memory pitch:                          %lu bytes\n", deviceProp.memPitch);
+        printf("  Texture alignment:                             %lu bytes\n", deviceProp.textureAlignment);
+        printf("  Concurrent copy and kernel execution:          %s with %d copy engine(s)\n", (deviceProp.deviceOverlap ? "Yes" : "No"), deviceProp.asyncEngineCount);
+        printf("  Run time limit on kernels:                     %s\n", deviceProp.kernelExecTimeoutEnabled ? "Yes" : "No");
+        printf("  Integrated GPU sharing Host Memory:            %s\n", deviceProp.integrated ? "Yes" : "No");
+        printf("  Support host page-locked memory mapping:       %s\n", deviceProp.canMapHostMemory ? "Yes" : "No");
+        printf("  Alignment requirement for Surfaces:            %s\n", deviceProp.surfaceAlignment ? "Yes" : "No");
+        printf("  Device has ECC support:                        %s\n", deviceProp.ECCEnabled ? "Enabled" : "Disabled");
+#if defined(WIN32) || defined(_WIN32) || defined(WIN64) || defined(_WIN64)
+        printf("  CUDA Device Driver Mode (TCC or WDDM):         %s\n", deviceProp.tccDriver ? "TCC (Tesla Compute Cluster Driver)" : "WDDM (Windows Display Driver Model)");
+#endif
+        printf("  Device supports Unified Addressing (UVA):      %s\n", deviceProp.unifiedAddressing ? "Yes" : "No");
+        printf("  Device PCI Domain ID / Bus ID / location ID:   %d / %d / %d\n", deviceProp.pciDomainID, deviceProp.pciBusID, deviceProp.pciDeviceID);
+
+        const char *sComputeMode[] = {
+            "Default (multiple host threads can use ::cudaSetDevice() with device simultaneously)",
+            "Exclusive (only one host thread in one process is able to use ::cudaSetDevice() with this device)",
+            "Prohibited (no host thread can use ::cudaSetDevice() with this device)",
+            "Exclusive Process (many threads in one process is able to use ::cudaSetDevice() with this device)",
+            "Unknown",
+            NULL
+        };
+        printf("  Compute Mode:\n");
+        printf("     < %s >\n", sComputeMode[deviceProp.computeMode]);
+    }
+
+    // If there are 2 or more GPUs, query to determine whether RDMA is supported
+    if (deviceCount >= 2)
+    {
+        cudaDeviceProp prop[64];
+        int gpuid[64]; // we want to find the first two GPU's that can support P2P
+        int gpu_p2p_count = 0;
+
+        for (int i=0; i < deviceCount; i++)
+        {
+            checkCudaErrors(cudaGetDeviceProperties(&prop[i], i));
+
+            // Only boards based on Fermi or later can support P2P
+            if ((prop[i].major >= 2)
+#if defined(WIN32) || defined(_WIN32) || defined(WIN64) || defined(_WIN64)
+                // on Windows (64-bit), the Tesla Compute Cluster driver for windows must be enabled to supprot this
+                && prop[i].tccDriver
+#endif
+               )
+            {
+                // This is an array of P2P capable GPUs
+                gpuid[gpu_p2p_count++] = i;
+            }
+        }
+
+        // Show all the combinations of support P2P GPUs
+        int can_access_peer_0_1, can_access_peer_1_0;
+
+        if (gpu_p2p_count >= 2)
+        {
+            for (int i = 0; i < gpu_p2p_count-1; i++)
+            {
+                for (int j = 1; j < gpu_p2p_count; j++)
+                {
+                    checkCudaErrors(cudaDeviceCanAccessPeer(&can_access_peer_0_1, gpuid[i], gpuid[j]));
+                    printf("> Peer access from %s (GPU%d) -> %s (GPU%d) : %s\n", prop[gpuid[i]].name, gpuid[i],
+                           prop[gpuid[j]].name, gpuid[j] ,
+                           can_access_peer_0_1 ? "Yes" : "No");
+                }
+            }
+
+            for (int j = 1; j < gpu_p2p_count; j++)
+            {
+                for (int i = 0; i < gpu_p2p_count-1; i++)
+                {
+                    checkCudaErrors(cudaDeviceCanAccessPeer(&can_access_peer_1_0, gpuid[j], gpuid[i]));
+                    printf("> Peer access from %s (GPU%d) -> %s (GPU%d) : %s\n", prop[gpuid[j]].name, gpuid[j],
+                           prop[gpuid[i]].name, gpuid[i] ,
+                           can_access_peer_1_0 ? "Yes" : "No");
+                }
+            }
+        }
+    }
+
+    // csv masterlog info
+    // *****************************
+    // exe and CUDA driver name
+    printf("\n");
+    std::string sProfileString = "deviceQuery, CUDA Driver = CUDART";
+    char cTemp[128];
+
+    // driver version
+    sProfileString += ", CUDA Driver Version = ";
+#if defined(WIN32) || defined(_WIN32) || defined(WIN64) || defined(_WIN64)
+    sprintf_s(cTemp, 10, "%d.%d", driverVersion/1000, (driverVersion%100)/10);
+#else
+    sprintf(cTemp, "%d.%d", driverVersion/1000, (driverVersion%100)/10);
+#endif
+    sProfileString +=  cTemp;
+
+    // Runtime version
+    sProfileString += ", CUDA Runtime Version = ";
+#if defined(WIN32) || defined(_WIN32) || defined(WIN64) || defined(_WIN64)
+    sprintf_s(cTemp, 10, "%d.%d", runtimeVersion/1000, (runtimeVersion%100)/10);
+#else
+    sprintf(cTemp, "%d.%d", runtimeVersion/1000, (runtimeVersion%100)/10);
+#endif
+    sProfileString +=  cTemp;
+
+    // Device count
+    sProfileString += ", NumDevs = ";
+#if defined(WIN32) || defined(_WIN32) || defined(WIN64) || defined(_WIN64)
+    sprintf_s(cTemp, 10, "%d", deviceCount);
+#else
+    sprintf(cTemp, "%d", deviceCount);
+#endif
+    sProfileString += cTemp;
+
+    // Print Out all device Names
+    for (dev = 0; dev < deviceCount; ++dev)
+    {
+#if defined(WIN32) || defined(_WIN32) || defined(WIN64) || defined(_WIN64)
+        sprintf_s(cTemp, 13, ", Device%d = ", dev);
+#else
+        sprintf(cTemp, ", Device%d = ", dev);
+#endif
+        cudaDeviceProp deviceProp;
+        cudaGetDeviceProperties(&deviceProp, dev);
+        sProfileString += cTemp;
+        sProfileString += deviceProp.name;
+    }
+
+    sProfileString += "\n";
+    printf("%s", sProfileString.c_str());
+
+    printf("Result = PASS\n");
+
+    // finish
+    // cudaDeviceReset causes the driver to clean up all state. While
+    // not mandatory in normal operation, it is good practice.  It is also
+    // needed to ensure correct operation when the application is being
+    // profiled. Calling cudaDeviceReset causes all profile data to be
+    // flushed before the application exits
+    cudaDeviceReset();
+    return 0;
+}

pkgs/cudainfo/default.nix

@@ -0,0 +1,43 @@
+{
+  stdenv
+, cudatoolkit
+, cudaPackages
+, autoAddDriverRunpath
+, strace
+}:
+
+stdenv.mkDerivation (finalAttrs: {
+  name = "cudainfo";
+  src = ./.;
+  buildInputs = [
+    cudatoolkit # Required for nvcc
+    cudaPackages.cuda_cudart.static # Required for -lcudart_static
+    autoAddDriverRunpath
+  ];
+  installPhase = ''
+    mkdir -p $out/bin
+    cp -a cudainfo $out/bin
+  '';
+  passthru.gpuCheck = stdenv.mkDerivation {
+    name = "cudainfo-test";
+    requiredSystemFeatures = [ "cuda" ];
+    dontBuild = true;
+    nativeCheckInputs = [
+      finalAttrs.finalPackage # The cudainfo package from above
+      strace # When it fails, it will show the trace
+    ];
+    dontUnpack = true;
+    doCheck = true;
+    checkPhase = ''
+      if ! cudainfo; then
+        set -x
+        cudainfo=$(command -v cudainfo)
+        ldd $cudainfo
+        readelf -d $cudainfo
+        strace -f $cudainfo
+        set +x
+      fi
+    '';
+    installPhase = "touch $out";
+  };
+})

pkgs/mpich-fix-hwtopo.patch

@@ -1,36 +0,0 @@
-diff --git a/src/util/mpir_hwtopo.c b/src/util/mpir_hwtopo.c
-index 33e88bc..ee3641c 100644
---- a/src/util/mpir_hwtopo.c
-+++ b/src/util/mpir_hwtopo.c
-@@ -200,18 +200,6 @@ int MPII_hwtopo_init(void)
- #ifdef HAVE_HWLOC
-     bindset = hwloc_bitmap_alloc();
-     hwloc_topology_init(&hwloc_topology);
--    char *xmlfile = MPIR_pmi_get_jobattr("PMI_hwloc_xmlfile");
--    if (xmlfile != NULL) {
--        int rc;
--        rc = hwloc_topology_set_xml(hwloc_topology, xmlfile);
--        if (rc == 0) {
--            /* To have hwloc still actually call OS-specific hooks, the
--             * HWLOC_TOPOLOGY_FLAG_IS_THISSYSTEM has to be set to assert that the loaded
--             * file is really the underlying system. */
--            hwloc_topology_set_flags(hwloc_topology, HWLOC_TOPOLOGY_FLAG_IS_THISSYSTEM);
--        }
--        MPL_free(xmlfile);
--    }
-
-     hwloc_topology_set_io_types_filter(hwloc_topology, HWLOC_TYPE_FILTER_KEEP_ALL);
-     if (!hwloc_topology_load(hwloc_topology)) 
-
---- a/src/mpi/init/local_proc_attrs.c
-+++ b/src/mpi/init/local_proc_attrs.c
-@@ -79,10 +79,6 @@ int MPII_init_local_proc_attrs(int *p_thread_required)
-     /* Set the number of tag bits. The device may override this value. */
-     MPIR_Process.tag_bits = MPIR_TAG_BITS_DEFAULT;
-
--    char *requested_kinds = MPIR_pmi_get_jobattr("PMI_mpi_memory_alloc_kinds");
--    MPIR_get_supported_memory_kinds(requested_kinds, &MPIR_Process.memory_alloc_kinds);
--    MPL_free(requested_kinds);
--
-     return mpi_errno;
- }

pkgs/overlay.nix

@@ -11,10 +11,6 @@ final: prev:
       paths = [ pmix.dev pmix.out ];
     };
   in prev.mpich.overrideAttrs (old: {
-    patches = (old.patches or []) ++ [
-      # See https://github.com/pmodels/mpich/issues/6946
-      ./mpich-fix-hwtopo.patch
-    ];
     buildInput = old.buildInputs ++ [
       libfabric
       pmixAll
@@ -56,4 +52,16 @@ final: prev:
   prometheus-slurm-exporter = prev.callPackage ./slurm-exporter.nix { };
   meteocat-exporter = prev.callPackage ./meteocat-exporter/default.nix { };
   upc-qaire-exporter = prev.callPackage ./upc-qaire-exporter/default.nix { };
+  cudainfo = prev.callPackage ./cudainfo/default.nix { };
+
+  amd-uprof = prev.callPackage ./amd-uprof/default.nix { };
+
+  # FIXME: Extend this to all linuxPackages variants. Open problem, see:
+  # https://discourse.nixos.org/t/whats-the-right-way-to-make-a-custom-kernel-module-available/4636
+  linuxPackages = prev.linuxPackages.extend (_final: _prev: {
+    amd-uprof-driver = _prev.callPackage ./amd-uprof/driver.nix { };
+  });
+  linuxPackages_latest = prev.linuxPackages_latest.extend(_final: _prev: {
+    amd-uprof-driver = _prev.callPackage ./amd-uprof/driver.nix { };
+  });
 }

secrets/ceph-user.age

@@ -1,19 +1,25 @@
 age-encryption.org/v1
--> ssh-ed25519 AY8zKw xeyzSqfio6SMS9SqywR+7II80D12Oha9T5zOgAIABSQ
+-> ssh-ed25519 AY8zKw /gmhFOFqOs8IobAImvQVKeM5Y6k0FpuR61/Cu5drVVI
-ST26VaF2G1xv9l7d3jWKG32ssOivfwx+p9jLLV7ZFnU
+g9FXJg2oIoien0zJ70FWHwSTM8SBwbpS188S3Swj7EM
--> ssh-ed25519 sgAamA HrRx+x7NjXKVDaealWFo+Q8zMAdzoj6nTBxw0KMi3jE
+-> ssh-ed25519 sgAamA opPjlWPhSiI0Rd5l7kd204S5FXFLcQcQftyKb7MDmnU
-nlcEVTDTe1mPeS16/t9GYRnSSkm5EjpeiBZPIC/2f8U
+3XrRDVnglCP+vBwvfd1rP5gHttsGDHyXwbf10a8/kKY
--> ssh-ed25519 HY2yRg NDp5vUeX35rDV78DFQi9fsc71pQNVE8YQ1StCp+YjTg
+-> ssh-ed25519 HY2yRg QKZbubM76C3tobPoyCFDRclA9Pzb2fC7s4WOoIgdORc
-MdUAWHd1k6Jed2pp7Wct/DgF6ShqXFwNxPaXeBOLAcs
+K5kckU0KhQFTE6SikJXFJgM41Tco5+VqOsaG0qLrY1Q
--> ssh-ed25519 tcumPQ d0zVVB8t7W9KUapOsnsrvpAj7LgM9zS0yCv8SQnF0g8
+-> ssh-ed25519 fw2Xhg +ohqts8dLFjvdHxrGHcOGxU0dm+V3N//giljHkobpDM
-aAPaWRTEBEQgmCkRG69NuWZ/lEva7vH+L8ifQSE0Z1I
+jR/UzGrfS9lrJ/VeolKLxfzeJAf2fIB2pdIn/6ukqNk
--> ssh-ed25519 JJ1LWg 4l8GZNdGOSbqKvmKq1q1aPvjeQIwpgbJj4DBYBse7x4
+-> ssh-ed25519 tcumPQ 3DPkDPIQQSVtXSLzIRETsIyXQ0k1o18Evn6vf+l/6R8
-rNhTiZlwzyOiCLzYRSzJ5AHebbv94dOgl1UyNmDJD8A
+bLXF62OmJjnOT1vvgq3+AcOKKSG5NonrK5EqCVc0Mwo
--> ssh-ed25519 CAWG4Q vGhwJDLJIAU8BpV6GP8Dnz2pvTAMufY4v4nvrr2O9yw
+-> ssh-ed25519 JJ1LWg 2Wefc7eLolMU5InEmCNTq21Mf71mI0a2N1HgDrlHvy4
-hNZZFDYUMPQNM5+qcc5arIgqQw0PXuqq1WWDTpE+EHo
+qXFW9CQBnrzubZ0mzS0Io2WGRrwGBkmeYndBTcZn/fM
--> ssh-ed25519 xA739A 8eEi9S5dMWPVR4fKVZdV5eHBOJVf2Ap+3qHSYtYHYgc
+-> ssh-ed25519 cDBabA oiH36AoIt/fFFYgnoxtH7OoetP+2/wjtn8qo3RJDSHc
-GcgzvJiqsNyZTVk12Z0FEnqB4LgfQ1xjKQwXdto1Hjs
+qKmkxy1aZGP4ZwC0iH7n7hiJ0+rFQYvjQb5O1a1Z0r4
--> ssh-ed25519 MSF3dg oUY9IjDR6hi1qbrCV5z5IcYj85cMppxO94iqkD60Eww
+-> ssh-ed25519 cK5kHw bX3RtO5StMejUYWAaA37fjHA5nO7Xs1vWDQk3yOjs2o
-cBzFGrhh+kWjIi0llw2RqACU1pa7XT9kqWkSeAY8VGI
+Egxmcf8FKAd+E5hMLmhV1yQsCo5rJyUazf1szOvpTAM
---- q7AaMOj7ZaS+Mf6trWK56o/1q/c2urrQBPAqk4PtATA
+-> ssh-ed25519 CAWG4Q oKqqRDJH0w8lsoQBQk0w8PO+z5gFNmSaGBUSumvDp1I
-~<7E><>k-/<2F>Xw<58><77><1D>V<EFBFBD>(<18><>Z<EFBFBD>d\<5C><>t<EFBFBD>'q<><71><EFBFBD>3<EFBFBD><33>R<EFBFBD>a\yFW<46>
+m1zWp9MfViAmtpbJhqOHraIokDaPKb0DvvO4vAGCTWI
+-> ssh-ed25519 xA739A G26kPOz6sbFATs+KAr7gbDvji13eA1smFusQAOJXMwA
+Sppvz7A103kZoNxoGsd6eXeCvVh7mBE2MRwLFj9O1dY
+-> ssh-ed25519 MSF3dg 55ekNcp+inbUd+GQ/VZ7BoBASaJ8YDqF74CVXy1PUxQ
+aTHLLAbzQPWWld/OT3BKebc6FcmsqMTaWCPBGm1UHic
+--- mVkAMnI9XQhS3fMiFuuXP/yLR9wEG9+Rr8pA4Uc0avY
+<04>DU <20><>s<EFBFBD><73><EFBFBD><EFBFBD>j<EFBFBD><6A>M<EFBFBD><4D>$<24>[<5B>M<EFBFBD><4D><EFBFBD><03>[_<>K7s<37>ju<>v<EFBFBD>D<EFBFBD>4<EFBFBD>g<EFBFBD><67>܄3<>Gn<47><6E><EFBFBD> ɽ<>P<EFBFBD>7~rZs<><73>

secrets/gitea-runner-token.age

@@ -1,11 +1,13 @@
 age-encryption.org/v1
--> ssh-ed25519 HY2yRg WUMWvyagPalsy7u1RaEFAwJvFowso1/quNBo+nAkxhQ
+-> ssh-ed25519 HY2yRg gKGxsjHfpiRDQ6Tuvcx7pjKgrVUGweotuplLYwCGvik
-OHcebB7koPKhy58A6qngEVNWckkWChyEK3dwgy8EL5o
+DSz9j/stVyB1lXpVP+kg+H+RDgSftREGFFLQZClC3kI
--> ssh-ed25519 CAWG4Q Yx/HLIryUNE2BaqTl84FrNRy4XLCY2TRkRgbA9k3qU4
+-> ssh-ed25519 cK5kHw 17DpKekfNVy4V742QSd61r2w6iawtOJR7Ct3UflDXio
-LZljfuLS5yMVVK6N57iC6cKEaFP6Hh2OkvWJjuFg8q0
+hsqTEPCYjHKvndMWPl4GpG23CzjGgVrS+cLIymISJHU
--> ssh-ed25519 xA739A DOXjPRttSWz51Sr7KfjgKfAtaIYMo3foB1Ywqw9HYDY
+-> ssh-ed25519 CAWG4Q oK01d4pbBqEZVsymSiKijPvJo714xsMSRMbzkssJKiw
-CA5puXK/1HDOitA2XHBI3OdKmZ7BzHst4DyuWGMC6hE
+hs0tVFkqtIHXg9jtC2iDgCtefFcWvGJkXB+HJUcqXQs
--> ssh-ed25519 MSF3dg +2LetdIiIZUk7wtHNS1tYsLo4ypwqZ9gpg77RQrnzHU
+-> ssh-ed25519 xA739A KxO+AawfLMERHwzt3YnZRwPFlCfGETma7fo8M+ZtsAY
-yIUu8BVbF3dhUx3531RR50/cJQd9gd8VfKUQzEeT/iQ
+eSn0+/rhLQxNKt5xKubKck8Nxun2Sh3eJqBU/hwgzZM
---- oY/wQ+RjZO2CmKZtbQ0yOVZ5fv2+AlvvkRu1UDfCNAA
+-> ssh-ed25519 MSF3dg OyaZBLB2kO8fU139lXbbC404gT7IzIWk+BMhYzabBDg
-_8`G<>=C7@x&<26><>\Ft<46>)<29><><EFBFBD><EFBFBD><EFBFBD>cPe<50><65>%<25>ֽ[zX-0<>[<11><><EFBFBD>ɲ<><C9B2>tz<74><7A>;%<25><><EFBFBD><EFBFBD><EFBFBD>~<7E>H0<48>؃*XD<58>;<3B><>
+/fiPFfBJcb+e40+fZbwCw7niF2hh+JxUPiKSiwUSOWg
+--- ycZyGX+Li+LsOuweF9OVPl8aoMaRgp/RdFbDrPszkUs
+<EFBFBD><EFBFBD><EFBFBD><EFBFBD>YM<EFBFBD><EFBFBD>:E O<><4F>2<EFBFBD>r=<15>&4<><04>CQΣ<51><CEA3>hC<68><43><EFBFBD>cb<63>^Sy<53><79>%	<09><>x-vC`g<><15><><EFBFBD><EFBFBD>W^<5E><>wVG<0B><><EFBFBD>

secrets/gitlab-runner-docker-token.age

@@ -1,11 +1,13 @@
 age-encryption.org/v1
--> ssh-ed25519 HY2yRg 6C5Cv7ILdBrpMkCTT/insUY0kyQWbfgU500Ai8ePOXY
+-> ssh-ed25519 HY2yRg U2KQWviZIVNemm9e8h7H+eOzoYNxXgLLS3hsZLMAuGk
-tMw6ehFrsq2dvDEXkLOJwrNZfI28trlr9uy3xW/fzpA
+6n5dH1McNzk3rscP4v2pqZYDWtUFMd15rZsEd/mqIFM
--> ssh-ed25519 CAWG4Q x/j+364IYURgt7fhIPBzabbWMEg08nX8MRrJM/1Q6RU
+-> ssh-ed25519 cK5kHw Ebrj/cpz1cFWAYAV9OxgyyH85OEMUnfUIV66p7jaoFY
-AL5Ut2rDr3UXcQXMZJ53ZMf5wMHmT83whx0ntJfW/WU
+6J7hWqODtS/fIF4BpxhxbrxZq5vbolvbLqRKqazT02M
--> ssh-ed25519 xA739A QjXftBsoGV1rVeHSKcsjp+HMpRVsaHOeeGdDcF6ZWg4
+-> ssh-ed25519 CAWG4Q mXqoQH9ycHF7u0y8mazCgynHxNLxTnrmQHke+2a5QCc
-ovVoYPaPn3liGPAxHWY37CBIUFjAXurv6jMWs2He3HQ
+mq6PdSF+KOqthuXwzTCsOQsi5KG0z1wHUck+bSTyOBY
--> ssh-ed25519 MSF3dg FG0CQOj9fRlneW5QrWiy5ksRpicUwHqX9QMpZWhDImw
+-> ssh-ed25519 xA739A TADeswueqDEroZWLjMw3RDNwVQ2xRD+JUMVZENovn0M
-L20n1vZRepsRPT4xM6TO6PcI/MJxw4mBLUF0EPv9Uhs
+KFlnSjVFbjc+ZsbY8Ed7edC5B01TJGzd/dSryiLArPc
---- DEi7iuzkniq0JPatJ5f2KhrhxWid7ojHpvNfUCGxFtk
+-> ssh-ed25519 MSF3dg Pq+ZD8AqJGDHDbd4PO1ngNFST8+6C2ghZkO/knKzzEc
-<EFBFBD><EFBFBD>%	n<><6E>!;^Q<>
rqG<71>:<3A>jC.8l<38>|<7C><>o<EFBFBD><1E><>$LYy<59>N<EFBFBD>b<EFBFBD><1E><>:<14>{<7B><><EFBFBD>fާxTS\<5C>t<04>U<EFBFBD><55>\F<>)%<25><><EFBFBD>KL<4B>㙇p<E39987>:><3E><><EFBFBD><EFBFBD>&<1B>)<0B>Q<EFBFBD>1<>H܃V<DC83>Sޑ<53>n<>
+wyiL/u38hdQMokmfTsBrY7CtYwc+31FG4EDaqVEn31U
+--- 1z4cOipayh0zYkvasEVEvGreajegE/dqBV7b6E7aFh0
+<EFBFBD><EFBFBD><EFBFBD><EFBFBD>R<EFBFBD>@<40>/i<>I'<27><><EFBFBD>Nx<4E>r"<1D>`<1E>O<EFBFBD><4F><EFBFBD>y<><79>8<EFBFBD><38> \/<2F><>I<19><17>D<EFBFBD>`<60>ߓ<EFBFBD><DF93><EFBFBD><1E><04>uy<75><79><EFBFBD>:9Lt<4C><1D><><EFBFBD>؋<EFBFBD><D88B><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>AU<41><55><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>`<60>;<3B>q8<71>GLU#<23>i<EFBFBD>y<EFBFBD><79>i<03>ڜ

secrets/secrets.nix

@@ -2,6 +2,9 @@ let
   keys = import ../keys.nix;
   adminsKeys = builtins.attrValues keys.admins;
   hut = [ keys.hosts.hut ] ++ adminsKeys;
+  fox = [ keys.hosts.fox ] ++ adminsKeys;
+  apex = [ keys.hosts.apex ] ++ adminsKeys;
+  raccoon = [ keys.hosts.raccoon ] ++ adminsKeys;
   mon = [ keys.hosts.hut keys.hosts.tent ] ++ adminsKeys;
   tent = [ keys.hosts.tent ] ++ adminsKeys;
   # Only expose ceph keys to safe nodes and admins
@@ -24,4 +27,8 @@ in
 
   "ceph-user.age".publicKeys = safe;
   "munge-key.age".publicKeys = safe;
+
+  "wg-fox.age".publicKeys = fox;
+  "wg-apex.age".publicKeys = apex;
+  "wg-raccoon.age".publicKeys = raccoon;
 }

secrets/tent-gitlab-runner-pm-shell-token.age

@@ -1,13 +1,13 @@
 age-encryption.org/v1
--> ssh-ed25519 G5LX5w V9bHLoGuY4stRwbzVS9Qa0L9yoY+UoCoXc+dJJQW/Ag
+-> ssh-ed25519 G5LX5w 1KfTmTRP3iSdcclf/FuIpFWpy1tgKs5ED+qSYWo7inY
-2ut9GfdJ3KBCqZRaloZCQsl8MLfaZAZxqj6JtPJzu2k
+RX6Q1nLFF/yiVLpkWrl0BI0PpLoBi753+y8l/AXjNE4
--> ssh-ed25519 CAWG4Q OAqnIfMECpKglZ7aF9tv/PQinG1Ou2+IEZ+nf4dtQjg
+-> ssh-ed25519 cK5kHw TP7+OQpQSNuyArnUo1C97J3P3oB0YtzCEPeVvlzsYHE
-dANdMLe4iI0d6Xd/dIMpZK+mgw2+VmJFQScHaIxD7WI
+Bsy5KPNHTVNHnF1sxOvlfJq3CNMVFaXdYkRG2vSj7qM
--> ssh-ed25519 xA739A nVNF4Y6VSa5PP6FFBJpVmoFYYseoFx5F2wJU+Pwk+Xk
+-> ssh-ed25519 CAWG4Q eQyzwNaH6CfaYIjs8abEuQxt6vxRXsGz69UletMUVDE
-A5CiuTSNlX9Y76qhYgblBdJl3zPhtjWho2oL5/sIKu0
+FDcynPO7xg4PWez5Z8gTg5LyE0Wgb3zT9i3Kon67QsU
--> ssh-ed25519 MSF3dg /WMsGnBGzquIMyw06gHKpSS4OUxheulT59kxi+/pxxU
+-> ssh-ed25519 xA739A 2JuLai2fUu3dZBydS8cMrLrEUIUkz4NNaiupoBOtTwU
-ppwcv7RLzUbQUM7j0Tb9rRVT9XyPMhqYr2fr4S0nTJY
+sdM3X+XRzysop7yqa76Z7FAwTHOj91STCtZvfIgCdB0
---- zOe0Ko0oxArbmxePMPDVAT0pDju7IeOAih7sNrDcoVs
+-> ssh-ed25519 MSF3dg fSPkiWnpInX1V5p3afPCoPotcGFoWFiOMPThtY927lc
-i<EFBFBD>k<EFBFBD>A
+8v7E/3l0xA2VWZPXzkN4NmnaA0KJutLMurn/ZXZmhxA
-hODV<44>w!<21><0C><>E݈<45><DD88>+<2B><>`<60><><EFBFBD><EFBFBD>C<><43>5<EFBFBD>L<EFBFBD>A<EFBFBD>t<1A>M^
<01>E<<1B>HI<48>_<EFBFBD>nn<6E><6E><EFBFBD>o<EFBFBD>?<3F>j-<05>
+--- MQkyBx9hT4ILYXKoZT18PWny1QbDFymcZr63zjMN/qQ
-A<1B>nԔί<1B>>Z<><5A>z<EFBFBD><7A><EFBFBD>dT<64><54>b"<22>(@<40><>{_ځC
+-b<>#<23><>M.<16>@<40>t<EFBFBD><74><EFBFBD>ŵ}+ό#@<40><><EFBFBD><EFBFBD><EFBFBD>k<EFBFBD>y<EFBFBD><79><EFBFBD>?v<><76>n<1F><>T<EFBFBD>+<2B><><EFBFBD>[<5B>Q<EFBFBD> gA<67><41><EFBFBD>

secrets/wg-fox.age

@@ -0,0 +1,14 @@
+age-encryption.org/v1
+-> ssh-ed25519 cDBabA heyW9/cxgwFX9IexQIXjAQDWGQPNcMXcArQp2Rxsqx4
+o9MQ7EH8PDDjsJdpH9F3Xq2zUoaDAJQlfFmYucSFs6Y
+-> ssh-ed25519 cK5kHw Sza4pos7K3qW3omEeyidI/jszJNf9smemSZnUJfCIww
+D6vazXki7hIYraIuSiGPS+FPbkFUwHhHWDf52OhEIMg
+-> ssh-ed25519 CAWG4Q YexIHueOIMmIN8JIDyNUOKBkyz/k18HqV3hTXh48KlM
+xh8UJzzWT6ByN+Dpn4JrMNsjGC/uc/v6LynwjBDz9NQ
+-> ssh-ed25519 xA739A KySG3TXdqfCMUkVEDGa74B0op745s3XGYxFLyAXSQAc
+5EI/yb5ctW9Qu18bHm3/sK97kwGcKzzmWvPSCWm89XA
+-> ssh-ed25519 MSF3dg MNxnNj0fHmri8ophexXPNjRUBUWrzcuk5S1mucxUMTE
+GVFWXtISEU8ZmlwL4nh4weAgfGrt2GHX0DTzbpS6zg8
+--- UdrqkYG2ZApAuwdZeNhC50NP2rkD/Ol6y8nJa4RHx7Y
+<EFBFBD>ܻ<EFBFBD>m(<28><><EFBFBD>><3E>H<48>Y87<><37>G<0F>+*<12><><EFBFBD><EFBFBD>9V<>.<2E><><EFBFBD><EFBFBD><03><><EFBFBD>p<EFBFBD>Oo<4F>=+哇<>P0<50><30>{<7B>)<29><17><><EFBFBD><EFBFBD>><3E>z3P^
+u

web/content/fox/_index.md

@@ -21,17 +21,28 @@ the detailed specifications:
 
 ## Access
 
-To access the machine, request a SLURM session from [hut](/hut) using the `fox`
+To access the machine, request a SLURM session from [apex](/apex) using the `fox`
-partition:
+partition. If you need the machine for performance measurements, use an
+exclusive reservation:
 
-    hut% salloc -p fox
+    apex% salloc -p fox --exclusive
 
-Then connect via ssh:
+Otherwise, specify the CPUs that you need so other users can also use the node
+at the same time:
 
-    hut% ssh fox
+    apex% salloc -p fox -c 8
+
+Then use srun to execute an interactive shell:
+
+    apex% srun --pty $SHELL
     fox%
 
-Follow [these steps](/access) if you don't have access to hut or fox.
+Make sure you get all CPUs you expect:
+
+    fox% grep Cpus_allowed_list /proc/self/status
+    Cpus_allowed_list:	0-191
+
+Follow [these steps](/access) if you don't have access to apex or fox.
 
 ## CUDA
 
@@ -85,13 +96,22 @@ Then just run `nix develop` from the same directory:
     Cuda compilation tools, release 12.4, V12.4.99
     Build cuda_12.4.r12.4/compiler.33961263_0
 
+## AMD uProf
+
+The [AMD uProf](https://www.amd.com/en/developer/uprof.html) performance
+analysis tool-suite is installed and ready to use.
+
+See the [AMD uProf user guide](https://docs.amd.com/r/en-US/57368-uProf-user-guide)
+([PDF backup for v5.1](https://jungle.bsc.es/pub/57368-uprof-user-guide.pdf))
+for more details on how to use the tools. To use the GUI make sure that you
+connect to fox using X11 forwarding.
+
 ## Filesystems
 
 The machine has several file systems available.
 
-- `$HOME`: Mounted via NFS across all nodes. It is slow and has low capacity.
+- `/nfs/home`: The `/home` from apex via NFS, which is also shared with other
-  Don't abuse.
+  xeon machines. It has about 2 ms of latency, so not suitable for quick random
-- `/ceph/home/$USER`: Shared Ceph file system across jungle nodes. Slow but high
+  access.
-  capacity. Stores three redundant copies of every file.
 - `/nvme{0,1}/$USER`: The two local NVME disks, very fast and large capacity.
 - `/tmp`: tmpfs, fast but not backed by a disk. Will be erased on reboot.

web/content/posts/2025-09-26/_index.md

@@ -0,0 +1,49 @@
+---
+title: "Update 2025-09-26"
+author: "Rodrigo Arias Mallo"
+date: 2025-09-26
+---
+
+This is a summary of notable changes introduced in the last two years. We
+continue to maintain all machines updated to the last NixOS release (currently
+NixOS 25.05).
+
+### New compute node: fox
+
+We have a new [fox machine](/fox), with two AMD Genoa 9684X CPUs and two NVIDIA
+RTX4000 GPUs. During the last months we have been doing some tests and it seems
+that most of the components work well. We have configured CUDA to use the NVIDIA
+GPUs, as well as AMD uProf to trace performance and energy counters from the
+CPUs.
+
+### Upgraded login node: apex
+
+We have upgraded the operating system on the login node to NixOS, which now runs
+Linux 6.15.6. During the upgrade, we have detected a problem with the storage
+disks. The `/` and `/home` partitions sit on a
+[RAID 5](https://en.wikipedia.org/wiki/Standard_RAID_levels#RAID_5),
+transparently handled by a RAID hardware controller which starts its own
+firmware before passing the control to the BIOS to continue the boot sequence. A
+problem during the startup of the firmware prevented the node to even reach the
+BIOS screen.
+
+After a long debugging session, we detected that the flash memory that stores
+the firmware of the hardware controller was likely to be the issue, since
+[memory cells](https://en.wikipedia.org/wiki/Flash_memory#Principles_of_operation)
+may lose charge over time and can end up corrupting the content. We flashed
+the latest firmware so the memory cells are charged again with the new bits and
+that fixed the problem. Hopefully we will be able to use it for some more years.
+
+The SLURM server has been moved to apex which allows users to also submit jobs
+to fox.
+
+### Migrated machines to BSC building
+
+The server room had a temperature issue that had been affecting our machines
+since the end of February of 2025. As the summer approached, the temperature
+exceeded the safe limits for our hardware, so we had to shutdown the cluster.
+
+![Room temperature](temp.png)
+
+Since then, we have moved the cluster to BSC premises, where it now rests at a
+stable temperature, so hopefully we won't have more unscheduled downtime.