Update configuration for UPC network

For now we keep the two IP addresses for BSC and UPC networks, so we
don't lose connectivity.

flake.nix

@@ -18,7 +18,6 @@ in
   {
     nixosConfigurations = {
       hut     = mkConf "hut";
-      tent    = mkConf "tent";
       owl1    = mkConf "owl1";
       owl2    = mkConf "owl2";
       eudy    = mkConf "eudy";

m/bay/configuration.nix

@@ -2,7 +2,7 @@
 
 {
   imports = [
-    ../common/ssf.nix
+    ../common/xeon.nix
     ../module/monitoring.nix
   ];
 

m/common/base/ssh.nix

@@ -8,6 +8,17 @@ in
   # Enable the OpenSSH daemon.
   services.openssh.enable = true;
 
+  # Connect to intranet git hosts via proxy
+  programs.ssh.extraConfig = ''
+    Host bscpm02.bsc.es bscpm03.bsc.es bscpm04.bsc.es gitlab-internal.bsc.es alya.gitlab.bsc.es
+      User git
+      ProxyCommand nc -X connect -x hut:23080 %h %p
+
+    # Connect to BSC machines via hut proxy too
+    Host amdlogin1.bsc.es armlogin1.bsc.es hualogin1.bsc.es glogin1.bsc.es glogin2.bsc.es fpgalogin1.bsc.es
+      ProxyCommand nc -X connect -x hut:23080 %h %p
+  '';
+
   programs.ssh.knownHosts = hostsKeys // {
     "gitlab-internal.bsc.es".publicKey = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIF9arsAOSRB06hdy71oTvJHG2Mg8zfebADxpvc37lZo3";
     "bscpm03.bsc.es".publicKey = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIM2NuSUPsEhqz1j5b4Gqd+MWFnRqyqY57+xMvBUqHYUS";

m/common/base/users.nix

@@ -20,7 +20,6 @@
       rarias = {
         uid = 1880;
         isNormalUser = true;
-        linger = true;
         home = "/home/Computational/rarias";
         description = "Rodrigo Arias";
         group = "Computational";
@@ -40,7 +39,7 @@
         home = "/home/Computational/arocanon";
         description = "Aleix Roca";
         group = "Computational";
-        extraGroups = [ "wheel" "tracing" ];
+        extraGroups = [ "wheel" ];
         hashedPassword = "$6$hliZiW4tULC/tH7p$pqZarwJkNZ7vS0G5llWQKx08UFG9DxDYgad7jplMD8WkZh5k58i4dfPoWtnEShfjTO6JHiIin05ny5lmSXzGM/";
         openssh.authorizedKeys.keys = [
           "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIF3zeB5KSimMBAjvzsp1GCkepVaquVZGPYwRIzyzaCba aleix@bsc"
@@ -56,7 +55,7 @@
         home = "/home/Computational/rpenacob";
         description = "Raúl Peñacoba";
         group = "Computational";
-        hosts = [ "owl1" "owl2" "hut" "tent" ];
+        hosts = [ "owl1" "owl2" "hut" ];
         hashedPassword = "$6$TZm3bDIFyPrMhj1E$uEDXoYYd1z2Wd5mMPfh3DZAjP7ztVjJ4ezIcn82C0ImqafPA.AnTmcVftHEzLB3tbe2O4SxDyPSDEQgJ4GOtj/";
         openssh.authorizedKeys.keys = [
           "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFYfXg37mauGeurqsLpedgA2XQ9d4Nm0ZGo/hI1f7wwH rpenacob@bsc"
@@ -69,7 +68,7 @@
         home = "/home/Computational/anavarro";
         description = "Antoni Navarro";
         group = "Computational";
-        hosts = [ "hut" "tent" "raccoon" "fox" ];
+        hosts = [ "hut" "raccoon" "fox" ];
         hashedPassword = "$6$QdNDsuLehoZTYZlb$CDhCouYDPrhoiB7/seu7RF.Gqg4zMQz0n5sA4U1KDgHaZOxy2as9pbIGeF8tOHJKRoZajk5GiaZv0rZMn7Oq31";
         openssh.authorizedKeys.keys = [
           "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAILWjRSlKgzBPZQhIeEtk6Lvws2XNcYwHcwPv4osSgst5 anavarro@ssfhead"
@@ -82,7 +81,7 @@
         home = "/home/Computational/abonerib";
         description = "Aleix Boné";
         group = "Computational";
-        hosts = [ "owl1" "owl2" "hut" "tent" "raccoon" "fox" ];
+        hosts = [ "owl1" "owl2" "hut" "raccoon" "fox" ];
         hashedPassword = "$6$V1EQWJr474whv7XJ$OfJ0wueM2l.dgiJiiah0Tip9ITcJ7S7qDvtSycsiQ43QBFyP4lU0e0HaXWps85nqB4TypttYR4hNLoz3bz662/";
         openssh.authorizedKeys.keys = [
           "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIIIFiqXqt88VuUfyANkZyLJNiuroIITaGlOOTMhVDKjf abonerib@bsc"
@@ -108,7 +107,7 @@
         home = "/home/Computational/dbautist";
         description = "Dylan Bautista Cases";
         group = "Computational";
-        hosts = [ "hut" "tent" "raccoon" ];
+        hosts = [ "hut" ];
         hashedPassword = "$6$a2lpzMRVkG9nSgIm$12G6.ka0sFX1YimqJkBAjbvhRKZ.Hl090B27pdbnQOW0wzyxVWySWhyDDCILjQELky.HKYl9gqOeVXW49nW7q/";
         openssh.authorizedKeys.keys = [
           "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIAb+EQBoS98zrCwnGKkHKwMLdYABMTqv7q9E0+T0QmkS dbautist@bsc-848818791"
@@ -121,7 +120,7 @@
         home = "/home/Computational/dalvare1";
         description = "David Álvarez";
         group = "Computational";
-        hosts = [ "hut" "tent" "fox" ];
+        hosts = [ "hut" "fox" ];
         hashedPassword = "$6$mpyIsV3mdq.rK8$FvfZdRH5OcEkUt5PnIUijWyUYZvB1SgeqxpJ2p91TTe.3eQIDTcLEQ5rxeg.e5IEXAZHHQ/aMsR5kPEujEghx0";
         openssh.authorizedKeys.keys = [
           "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIGEfy6F4rF80r4Cpo2H5xaWqhuUZzUsVsILSKGJzt5jF dalvare1@ssfhead"
@@ -134,7 +133,7 @@
         home = "/home/Computational/varcila";
         description = "Vincent Arcila";
         group = "Computational";
-        hosts = [ "hut" "tent" "fox" ];
+        hosts = [ "hut" "fox" ];
         hashedPassword = "$6$oB0Tcn99DcM4Ch$Vn1A0ulLTn/8B2oFPi9wWl/NOsJzaFAWjqekwcuC9sMC7cgxEVb.Nk5XSzQ2xzYcNe5MLtmzkVYnRS1CqP39Y0";
         openssh.authorizedKeys.keys = [
           "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIKGt0ESYxekBiHJQowmKpfdouw0hVm3N7tUMtAaeLejK vincent@varch"
@@ -144,7 +143,6 @@
 
     groups = {
       Computational = { gid = 564; };
-      tracing = { };
     };
   };
 }

m/common/ssf.nix

@@ -1,9 +0,0 @@
-{
-  # Provides the base system for a xeon node in the SSF rack.
-  imports = [
-    ./xeon.nix
-    ./ssf/fs.nix
-    ./ssf/net.nix
-    ./ssf/ssh.nix
-  ];
-}

m/common/ssf/ssh.nix

@@ -1,8 +0,0 @@
-{
-  # Connect to intranet git hosts via proxy
-  programs.ssh.extraConfig = ''
-    # Connect to BSC machines via hut proxy too
-    Host amdlogin1.bsc.es armlogin1.bsc.es hualogin1.bsc.es glogin1.bsc.es glogin2.bsc.es fpgalogin1.bsc.es
-      ProxyCommand nc -X connect -x hut:23080 %h %p
-  '';
-}

m/common/xeon.nix

@@ -1,7 +1,9 @@
 {
-  # Provides the base system for a xeon node, not necessarily in the SSF rack.
+  # Provides the base system for a xeon node.
   imports = [
     ./base.nix
+    ./xeon/fs.nix
     ./xeon/console.nix
+    ./xeon/net.nix
   ];
 }

m/common/xeon/net.nix

@@ -85,6 +85,10 @@
       10.0.40.8               eudy xeon08 xeon08-eth0
       10.0.42.8               eudy-ib xeon08-ib0
       10.0.40.108             eudy-ipmi xeon08-ipmi0 xeon08-ipmi
+
+      # fox
+      10.0.40.26              fox
+      10.0.40.126             fox-ipmi
     '';
   };
 }

m/eudy/configuration.nix

@@ -2,7 +2,7 @@
 
 {
   imports = [
-    ../common/ssf.nix
+    ../common/xeon.nix
     #(modulesPath + "/installer/netboot/netboot-minimal.nix")
 
     ./kernel/kernel.nix

m/fox/configuration.nix

@@ -24,6 +24,11 @@
     nameservers = [ "8.8.8.8" ];
     hostName = "fox";
     interfaces.enp1s0f0np0.ipv4.addresses = [
+      {
+        # BSC network (to be removed)
+        address = "10.0.40.26";
+        prefixLength = 24;
+      }
       {
         # UPC network
         # Public IP configuration:
@@ -41,9 +46,25 @@
       }
     ];
     extraHosts = ''
+      # Fox UPC
       147.83.30.141   fox.ac.upc.edu
       147.83.35.27    fox-ipmi.ac.upc.edu
+      # Fox BSC
+      10.0.40.26      fox
+      10.0.40.126     fox-ipmi
+    '' +
+    # To be removed:
+    ''
+      # Hut BSC
+      10.0.40.7       hut
     '';
+
+    # To be removed:
+    proxy = {
+      default = "http://hut:23080/";
+      noProxy = "127.0.0.1,localhost,internal.domain,10.0.40.40,hut";
+      allProxy = null;
+    };
   };
 
   # Configure Nvidia driver to use with CUDA

m/hut/configuration.nix

@@ -2,7 +2,7 @@
 
 {
   imports = [
-    ../common/ssf.nix
+    ../common/xeon.nix
 
     ../module/ceph.nix
     ../module/debuginfod.nix

m/hut/monitoring.nix

@@ -3,10 +3,7 @@
 {
   imports = [
     ../module/slurm-exporter.nix
-    ../module/meteocat-exporter.nix
-    ../module/upc-qaire-exporter.nix
     ./gpfs-probe.nix
-    ./nix-daemon-exporter.nix
   ];
 
   age.secrets.grafanaJungleRobotPassword = {
@@ -111,9 +108,6 @@
             "127.0.0.1:${toString config.services.prometheus.exporters.smartctl.port}"
             "127.0.0.1:9341" # Slurm exporter
             "127.0.0.1:9966" # GPFS custom exporter
-            "127.0.0.1:9999" # Nix-daemon custom exporter
-            "127.0.0.1:9929" # Meteocat custom exporter
-            "127.0.0.1:9928" # UPC Qaire custom exporter
             "127.0.0.1:${toString config.services.prometheus.exporters.blackbox.port}"
           ];
         }];
@@ -169,9 +163,6 @@
             "8.8.8.8"
             "ssfhead"
             "anella-bsc.cesca.cat"
-            "upc-anella.cesca.cat"
-            "fox.ac.upc.edu"
-            "arenys5.ac.upc.edu"
           ];
         }];
         relabel_configs = [
@@ -267,6 +258,17 @@
           }
         ];
       }
+      {
+        job_name = "ipmi-fox";
+        metrics_path = "/ipmi";
+        static_configs = [
+          { targets = [ "127.0.0.1:9290" ]; }
+        ];
+        params = {
+          target = [ "fox-ipmi" ];
+          module = [ "fox" ];
+        };
+      }
     ];
   };
 }

m/hut/nix-daemon-builds.sh

@@ -1,26 +0,0 @@
-#!/bin/sh
-
-# Locate nix daemon pid
-nd=$(pgrep -o nix-daemon)
-
-# Locate children of nix-daemon
-pids1=$(tr ' ' '\n' < "/proc/$nd/task/$nd/children")
-
-# For each children, locate 2nd level children
-pids2=$(echo "$pids1" | xargs -I @ /bin/sh -c 'cat /proc/@/task/*/children' | tr ' ' '\n')
-
-cat <<EOF
-HTTP/1.1 200 OK
-Content-Type: text/plain; version=0.0.4; charset=utf-8; escaping=values
-
-# HELP nix_daemon_build Nix daemon derivation build state.
-# TYPE nix_daemon_build gauge
-EOF
-
-for pid in $pids2; do
-  name=$(cat /proc/$pid/environ 2>/dev/null | tr '\0' '\n' | rg "^name=(.+)" - --replace '$1' | tr -dc ' [:alnum:]_\-\.')
-  user=$(ps -o uname= -p "$pid")
-  if [ -n "$name" -a -n "$user" ]; then
-    printf 'nix_daemon_build{user="%s",name="%s"} 1\n' "$user" "$name"
-  fi
-done

m/hut/nix-daemon-exporter.nix

@@ -1,23 +0,0 @@
-{ pkgs, config, lib, ... }:
-let
-  script = pkgs.runCommand "nix-daemon-exporter.sh" { }
-    ''
-      cp ${./nix-daemon-builds.sh} $out;
-      chmod +x $out
-    ''
-  ;
-in
-{
-  systemd.services.nix-daemon-exporter = {
-    description = "Daemon to export nix-daemon metrics";
-    path = [ pkgs.procps pkgs.ripgrep ];
-    wantedBy = [ "default.target" ];
-    serviceConfig = {
-      Type = "simple";
-      ExecStart = "${pkgs.socat}/bin/socat TCP4-LISTEN:9999,fork EXEC:${script}";
-      # Needed root to read the environment, potentially unsafe
-      User = "root";
-      Group = "root";
-    };
-  };
-}

m/koro/configuration.nix

@@ -2,7 +2,7 @@
 
 {
   imports = [
-    ../common/ssf.nix
+    ../common/xeon.nix
     #(modulesPath + "/installer/netboot/netboot-minimal.nix")
 
     ../eudy/cpufreq.nix

m/lake2/configuration.nix

@@ -2,7 +2,7 @@
 
 {
   imports = [
-    ../common/ssf.nix
+    ../common/xeon.nix
     ../module/monitoring.nix
   ];
 

m/map.nix

@@ -1,70 +0,0 @@
-{
-  # In physical order from top to bottom (see note below)
-  ssf = {
-    # Switches for Ethernet and OmniPath
-    switch-C6-S1A-05 = { pos=42; size=1; model="Dell S3048-ON"; };
-    switch-opa = { pos=41; size=1; };
-
-    # SSF login
-    ssfhead = { pos=39; size=2; label="SSFHEAD"; board="R2208WTTYSR"; contact="operations@bsc.es"; };
-
-    # Storage
-    bay   = { pos=38; size=1; label="MDS01"; board="S2600WT2R"; sn="BQWL64850303"; contact="rodrigo.arias@bsc.es"; };
-    lake1 = { pos=37; size=1; label="OSS01"; board="S2600WT2R"; sn="BQWL64850234"; contact="rodrigo.arias@bsc.es"; };
-    lake2 = { pos=36; size=1; label="OSS02"; board="S2600WT2R"; sn="BQWL64850266"; contact="rodrigo.arias@bsc.es"; };
-
-    # Compute xeon
-    owl1   = { pos=35; size=1; label="SSF-XEON01"; board="S2600WTTR"; sn="BQWL64954172"; contact="rodrigo.arias@bsc.es"; };
-    owl2   = { pos=34; size=1; label="SSF-XEON02"; board="S2600WTTR"; sn="BQWL64756560"; contact="rodrigo.arias@bsc.es"; };
-    xeon03 = { pos=33; size=1; label="SSF-XEON03"; board="S2600WTTR"; sn="BQWL64750826"; contact="rodrigo.arias@bsc.es"; };
-    # Slot 34 empty
-    koro   = { pos=31; size=1; label="SSF-XEON05"; board="S2600WTTR"; sn="BQWL64954293"; contact="rodrigo.arias@bsc.es"; };
-    xeon06 = { pos=30; size=1; label="SSF-XEON06"; board="S2600WTTR"; sn="BQWL64750846"; contact="antoni.navarro@bsc.es"; };
-    hut    = { pos=29; size=1; label="SSF-XEON07"; board="S2600WTTR"; sn="BQWL64751184"; contact="rodrigo.arias@bsc.es"; };
-    eudy   = { pos=28; size=1; label="SSF-XEON08"; board="S2600WTTR"; sn="BQWL64756586"; contact="aleix.rocanonell@bsc.es"; };
-
-    # 16 KNL nodes, 4 per chassis
-    knl01_04 = { pos=26; size=2; label="KNL01..KNL04"; board="HNS7200APX"; };
-    knl05_08 = { pos=24; size=2; label="KNL05..KNL18"; board="HNS7200APX"; };
-    knl09_12 = { pos=22; size=2; label="KNL09..KNL12"; board="HNS7200APX"; };
-    knl13_16 = { pos=20; size=2; label="KNL13..KNL16"; board="HNS7200APX"; };
-
-    # Slot 19 empty
-
-    # EPI (hw team, guessed order)
-    epi01 = { pos=18; size=1; contact="joan.cabre@bsc.es"; };
-    epi02 = { pos=17; size=1; contact="joan.cabre@bsc.es"; };
-    epi03 = { pos=16; size=1; contact="joan.cabre@bsc.es"; };
-    anon  = { pos=14; size=2; }; # Unlabeled machine. Operative
-
-    # These are old and decommissioned (off)
-    power8    = { pos=12; size=2; label="BSCPOWER8N3";   decommissioned=true; };
-    powern1   = { pos=8;  size=4; label="BSCPOWERN1";    decommissioned=true; };
-    gustafson = { pos=7;  size=1; label="gustafson";     decommissioned=true; };
-    odap01    = { pos=3;  size=4; label="ODAP01";        decommissioned=true; };
-    amhdal    = { pos=2;  size=1; label="AMHDAL";        decommissioned=true; }; # sic
-    moore     = { pos=1;  size=1; label="moore (earth)"; decommissioned=true; };
-  };
-
-  bsc2218 = {
-    raccoon = { board="W2600CR"; sn="QSIP22500829"; contact="rodrigo.arias@bsc.es"; };
-    tent    = { label="SSF-XEON04"; board="S2600WTTR"; sn="BQWL64751229"; contact="rodrigo.arias@bsc.es"; };
-  };
-
-  upc = {
-    fox = { board="H13DSG-O-CPU"; sn="UM24CS600392"; prod="AS-4125GS-TNRT"; prod_sn="E508839X5103339"; contact="rodrigo.arias@bsc.es"; };
-  };
-
-  # NOTE: Position is specified in "U" units (44.45 mm) and starts at 1 from the
-  # bottom. Example:
-  #
-  #  |   ...  | - [pos+size] <--- Label in chassis
-  #  +--------+
-  #  |  node  | - [pos+1]
-  #  |   2U   | - [pos]
-  #  +------- +
-  #  |   ...  | - [pos-1]
-  #
-  # NOTE: The board and sn refers to the FRU information (Board Product and
-  # Board Serial) via `ipmitool fru print 0`.
-}

m/module/meteocat-exporter.nix

@@ -1,17 +0,0 @@
-{ config, lib, pkgs, ... }:
-
-with lib;
-
-{
-  systemd.services."prometheus-meteocat-exporter" = {
-    wantedBy = [ "multi-user.target" ];
-    after = [ "network.target" ];
-    serviceConfig = {
-      Restart = mkDefault "always";
-      PrivateTmp = mkDefault true;
-      WorkingDirectory = mkDefault "/tmp";
-      DynamicUser = mkDefault true;
-      ExecStart = "${pkgs.meteocat-exporter}/bin/meteocat-exporter";
-    };
-  };
-}

m/module/ssh-hut-extern.nix

@@ -1,9 +0,0 @@
-{
-  programs.ssh.extraConfig = ''
-    Host ssfhead
-      HostName ssflogin.bsc.es
-    Host hut
-      ProxyJump ssfhead
-      HostName xeon07
-  '';
-}

m/module/upc-qaire-exporter.nix

@@ -1,17 +0,0 @@
-{ config, lib, pkgs, ... }:
-
-with lib;
-
-{
-  systemd.services."prometheus-upc-qaire-exporter" = {
-    wantedBy = [ "multi-user.target" ];
-    after = [ "network.target" ];
-    serviceConfig = {
-      Restart = mkDefault "always";
-      PrivateTmp = mkDefault true;
-      WorkingDirectory = mkDefault "/tmp";
-      DynamicUser = mkDefault true;
-      ExecStart = "${pkgs.upc-qaire-exporter}/bin/upc-qaire-exporter";
-    };
-  };
-}

m/owl1/configuration.nix

@@ -2,7 +2,7 @@
 
 {
   imports = [
-    ../common/ssf.nix
+    ../common/xeon.nix
     ../module/ceph.nix
     ../module/emulation.nix
     ../module/slurm-client.nix

m/owl2/configuration.nix

@@ -2,7 +2,7 @@
 
 {
   imports = [
-    ../common/ssf.nix
+    ../common/xeon.nix
     ../module/ceph.nix
     ../module/emulation.nix
     ../module/slurm-client.nix

m/raccoon/configuration.nix

@@ -3,10 +3,6 @@
 {
   imports = [
     ../common/base.nix
-    ../module/emulation.nix
-    ../module/debuginfod.nix
-    ../module/ssh-hut-extern.nix
-    ../eudy/kernel/perf.nix
   ];
 
   # Don't install Grub on the disk yet
@@ -27,18 +23,6 @@
       address = "84.88.51.152";
       prefixLength = 25;
     } ];
-    interfaces.enp5s0f1.ipv4.addresses = [ {
-      address = "10.0.44.1";
-      prefixLength = 24;
-    } ];
-    nat = {
-      enable = true;
-      internalInterfaces = [ "enp5s0f1" ];
-      externalInterface = "eno0";
-    };
-    hosts = {
-      "10.0.44.4" = [ "tent" ];
-    };
   };
 
   nix.settings = {
@@ -46,9 +30,6 @@
     trusted-public-keys = [ "jungle.bsc.es:pEc7MlAT0HEwLQYPtpkPLwRsGf80ZI26aj29zMw/HH0=" ];
   };
 
-  # Enable performance governor
-  powerManagement.cpuFreqGovernor = "performance";
-
   # Configure Nvidia driver to use with CUDA
   hardware.nvidia.package = config.boot.kernelPackages.nvidiaPackages.production;
   hardware.graphics.enable = true;
@@ -56,18 +37,6 @@
   nixpkgs.config.nvidia.acceptLicense = true;
   services.xserver.videoDrivers = [ "nvidia" ];
 
-  # Disable garbage collection for now
-  nix.gc.automatic = lib.mkForce false;
-
-  services.openssh.settings.X11Forwarding = true;
-
-  services.prometheus.exporters.node = {
-    enable = true;
-    enabledCollectors = [ "systemd" ];
-    port = 9002;
-    listenAddress = "127.0.0.1";
-  };
-
   users.motd = ''
     ⠀⠀⠀⠀⠀⠀⠀⣀⣀⣄⣠⣀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
     ⠀⠀⠀⠀⠀⠀⢰⠇⡀⠀⠙⠻⡿⣦⣀⡀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⡀⠀⠀⠀⠀

m/tent/configuration.nix

@@ -1,70 +0,0 @@
-{ config, pkgs, lib, ... }:
-
-{
-  imports = [
-    ../common/xeon.nix
-    ../module/emulation.nix
-    ../module/debuginfod.nix
-    ../module/ssh-hut-extern.nix
-  ];
-
-  # Select the this using the ID to avoid mismatches
-  boot.loader.grub.device = "/dev/disk/by-id/wwn-0x55cd2e414d537675";
-
-  networking = {
-    hostName = "tent";
-    interfaces.eno1.ipv4.addresses = [
-      {
-        address = "10.0.44.4";
-        prefixLength = 24;
-      }
-    ];
-
-    # Only BSC DNSs seem to be reachable from the office VLAN
-    nameservers = [ "84.88.52.35" "84.88.52.36" ];
-    defaultGateway = "10.0.44.1";
-  };
-
-  nix.settings = {
-    substituters = [ "https://jungle.bsc.es/cache" ];
-    trusted-public-keys = [ "jungle.bsc.es:pEc7MlAT0HEwLQYPtpkPLwRsGf80ZI26aj29zMw/HH0=" ];
-  };
-
-  services.prometheus.exporters.node = {
-    enable = true;
-    enabledCollectors = [ "systemd" ];
-    port = 9002;
-    listenAddress = "127.0.0.1";
-  };
-
-  boot.swraid = {
-    enable = true;
-    mdadmConf = ''
-      DEVICE partitions
-      ARRAY /dev/md0 metadata=1.2 UUID=496db1e2:056a92aa:a544543f:40db379d
-      MAILADDR root
-    '';
-  };
-
-  fileSystems."/vault" = {
-    device = "/dev/disk/by-label/vault";
-    fsType = "ext4";
-  };
-
-  # Make a /vault/$USER directory for each user.
-  systemd.services.create-vault-dirs = let
-    # Take only normal users in tent
-    users = lib.filterAttrs (_: v: v.isNormalUser) config.users.users;
-    commands = lib.concatLists (lib.mapAttrsToList
-      (_: user: [
-        "install -d -o ${user.name} -g ${user.group} -m 0711 /vault/${user.name}"
-      ]) users);
-    script = pkgs.writeShellScript "create-vault-dirs.sh" (lib.concatLines commands);
-  in {
-    enable = true;
-    wants = [ "local-fs.target" ];
-    after = [ "local-fs.target" ];
-    wantedBy = [ "multi-user.target" ];
-    serviceConfig.ExecStart = script;
-  };
-}

pkgs/meteocat-exporter/default.nix

@@ -1,25 +0,0 @@
-{ python3Packages, lib }:
-
-python3Packages.buildPythonApplication rec {
-  pname = "meteocat-exporter";
-  version = "1.0";
-
-  src = ./.;
-
-  doCheck = false;
-
-  build-system = with python3Packages; [
-    setuptools
-  ];
-
-  dependencies = with python3Packages; [
-    beautifulsoup4
-    lxml
-    prometheus-client
-  ];
-
-  meta = with lib; {
-    description = "MeteoCat Prometheus Exporter";
-    platforms = platforms.linux;
-  };
-}

pkgs/meteocat-exporter/meteocat-exporter

@@ -1,54 +0,0 @@
-#!/usr/bin/env python3
-
-import time
-from prometheus_client import start_http_server, Gauge
-from bs4 import BeautifulSoup
-from urllib import request
-
-# Configuration -------------------------------------------
-meteo_station = "X8" # Barcelona - Zona Universitària
-listening_port = 9929
-update_period = 60 * 5 # Each 5 min
-# ---------------------------------------------------------
-
-metric_tmin = Gauge('meteocat_temp_min', 'Min temperature')
-metric_tmax = Gauge('meteocat_temp_max', 'Max temperature')
-metric_tavg = Gauge('meteocat_temp_avg', 'Average temperature')
-metric_srad = Gauge('meteocat_solar_radiation', 'Solar radiation')
-
-def update(st):
-    url = 'https://www.meteo.cat/observacions/xema/dades?codi=' + st
-    response = request.urlopen(url)
-    data = response.read()
-    soup = BeautifulSoup(data, 'lxml')
-    table = soup.find("table", {"class" : "tblperiode"})
-    rows = table.find_all('tr')
-    row = rows[-1] # Take the last row
-    row_data = []
-    header = row.find('th')
-    header_text = header.text.strip()
-    row_data.append(header_text)
-    for col in row.find_all('td'):
-        row_data.append(col.text)
-    try:
-        # Sometimes it will return '(s/d)' and fail to parse
-        metric_tavg.set(float(row_data[1]))
-        metric_tmax.set(float(row_data[2]))
-        metric_tmin.set(float(row_data[3]))
-        metric_srad.set(float(row_data[10]))
-        #print("ok: temp_avg={}".format(float(row_data[1])))
-    except:
-        print("cannot parse row: {}".format(row))
-        metric_tavg.set(float("nan"))
-        metric_tmax.set(float("nan"))
-        metric_tmin.set(float("nan"))
-        metric_srad.set(float("nan"))
-
-if __name__ == '__main__':
-    start_http_server(port=listening_port, addr="localhost")
-    while True:
-        try:
-            update(meteo_station)
-        except:
-            print("update failed")
-        time.sleep(update_period)

pkgs/meteocat-exporter/setup.py

@@ -1,11 +0,0 @@
-#!/usr/bin/env python
-
-from setuptools import setup, find_packages
-
-setup(name='meteocat-exporter',
-      version='1.0',
-      # Modules to import from other scripts:
-      packages=find_packages(),
-      # Executables
-      scripts=["meteocat-exporter"],
-     )

pkgs/overlay.nix

@@ -54,6 +54,4 @@ final: prev:
   });
 
   prometheus-slurm-exporter = prev.callPackage ./slurm-exporter.nix { };
-  meteocat-exporter = prev.callPackage ./meteocat-exporter/default.nix { };
-  upc-qaire-exporter = prev.callPackage ./upc-qaire-exporter/default.nix { };
 }

pkgs/upc-qaire-exporter/default.nix

@@ -1,24 +0,0 @@
-{ python3Packages, lib }:
-
-python3Packages.buildPythonApplication rec {
-  pname = "upc-qaire-exporter";
-  version = "1.0";
-
-  src = ./.;
-
-  doCheck = false;
-
-  build-system = with python3Packages; [
-    setuptools
-  ];
-
-  dependencies = with python3Packages; [
-    prometheus-client
-    requests
-  ];
-
-  meta = with lib; {
-    description = "UPC Qaire Prometheus Exporter";
-    platforms = platforms.linux;
-  };
-}

pkgs/upc-qaire-exporter/setup.py

@@ -1,11 +0,0 @@
-#!/usr/bin/env python
-
-from setuptools import setup, find_packages
-
-setup(name='upc-qaire-exporter',
-      version='1.0',
-      # Modules to import from other scripts:
-      packages=find_packages(),
-      # Executables
-      scripts=["upc-qaire-exporter"],
-     )

pkgs/upc-qaire-exporter/upc-qaire-exporter

@@ -1,74 +0,0 @@
-#!/usr/bin/env python3
-
-import time
-from prometheus_client import start_http_server, Gauge
-import requests, json
-from datetime import datetime, timedelta
-
-# Configuration -------------------------------------------
-listening_port = 9928
-update_period = 60 * 5 # Each 5 min
-# ---------------------------------------------------------
-
-metric_temp = Gauge('upc_c6_s302_temp', 'UPC C6 S302 temperature sensor')
-
-def genparams():
-    d = {}
-    d['topic'] = 'TEMPERATURE'
-    d['shift_dates_to'] = ''
-    d['datapoints'] = 301
-    d['devicesAndColors'] = '1148418@@@#40ACB6'
-
-    now = datetime.now()
-
-    d['fromDate'] = now.strftime('%d/%m/%Y')
-    d['toDate'] = now.strftime('%d/%m/%Y')
-    d['serviceFrequency'] = 'NONE'
-
-    # WTF!
-    for i in range(7):
-        for j in range(48):
-            key = 'week.days[{}].hours[{}].value'.format(i, j)
-            d[key] = 'OPEN'
-
-    return d
-
-def measure():
-    # First we need to load session
-    s = requests.Session()
-    r = s.get("https://upc.edu/sirena")
-    if r.status_code != 200:
-        print("bad HTTP status code on new session: {}".format(r.status_code))
-        return
-
-    if s.cookies.get("JSESSIONID") is None:
-        print("cannot get JSESSIONID")
-        return
-
-    # Now we can pull the data
-    url = "https://upcsirena.app.dexma.com/l_12535/analysis/by_datapoints/data.json"
-    r = s.post(url, data=genparams())
-
-    if r.status_code != 200:
-        print("bad HTTP status code on data: {}".format(r.status_code))
-        return
-
-    #print(r.text)
-    j = json.loads(r.content)
-
-    # Just take the last one
-    last = j['data']['chartElementList'][-1]
-    temp = last['values']['1148418-Temperatura']
-
-    return temp
-
-if __name__ == '__main__':
-    start_http_server(port=listening_port, addr="localhost")
-    while True:
-        try:
-            metric_temp.set(measure())
-        except:
-            print("measure failed")
-            metric_temp.set(float("nan"))
-
-        time.sleep(update_period)