diff --git a/JOURNAL.md b/JOURNAL.md
index 9a5b9df..f53252c 100644
--- a/JOURNAL.md
+++ b/JOURNAL.md
@@ -1712,3 +1712,43 @@ typos in the printf command, this is the patch:
 
 So, let's fix the patch and switch to the "riscv,aclint-mtimer" timer, which
 doesn't set any quirk or weird offset.
+
+    GGGGGGGGG
+    OpenSBI v1.5
+       ____                    _____ ____ _____
+      / __ \                  / ____|  _ \_   _|
+     | |  | |_ __   ___ _ __ | (___ | |_) || |
+     | |  | | '_ \ / _ \ '_ \ \___ \|  _ < | |
+     | |__| | |_) |  __/ | | |____) | |_) || |_
+      \____/| .__/ \___|_| |_|_____/|____/_____|
+            | |
+            |_|
+
+    sbi_timer_init: begins
+    sbi_timer_init: got Zicntr extension
+    fdt_timer_cold_init: pos = 0
+    fdt_timer_cold_init: got match, name = riscv,aclint-mtimer
+    fdt_timer_cold_init: enabled
+    timer_mtimer_cold_init: begins, is_clint = 0
+    timer_mtimer_cold_init: mtime_addr = 0x40002000
+    timer_mtimer_cold_init: mtime_size = 0x000c0000
+    timer_mtimer_cold_init: mtimecmp_addr = 0x00000000
+    timer_mtimer_cold_init: mtimecmp_size = 0x00000000
+    fdt_timer_cold_init: drc->cold_init = -3
+    fdt_timer_init: fdt_timer_cold_init failed (-3)
+    sbi_platform_timer: sbi_platform_timer_init failed (-3)
+    init_coldboot: timer init failed (error -3)
+
+So, now we have better addresses, but this is not what I would expect. The regs
+property is being used to set the mtime address and size, while I would expect
+it to set the `mtimecmp_addr` too, but it seems it is expecting two pairs of
+address and size in the regs:
+
+    reg = <0x0 0x40002000 0x0 0x000c0000>;
+
+So, first let's add the mtimecmp after the mtime registers and see if that
+clears the -3 error.
+
+I'll leave it at 0x40002000, but I suspect the address might be 0x40170000:
+
+    #define OX_ALVEO_TIMER_BASE		0x40170000
diff --git a/ox-plic.dts b/ox-plic.dts
index 1959cfb..1499c37 100644
--- a/ox-plic.dts
+++ b/ox-plic.dts
@@ -229,7 +229,8 @@
 		 * Documentation/devicetree/bindings/riscv/cpus.yaml
 		 */
 		clint: clint@40002000 {
-			reg = <0x0 0x40002000 0x0 0x000c0000>;
+			/* MTIME and MTIMECMP address and size pairs */
+			reg = <0x0 0x40002000 0x0 0x8>, <0x0 0x40002008 0x0 0x8>;
 			interrupts-extended = <&HLIC0 3>, <&HLIC0 7>;
 			/*<&CPU0      0x3>,      <&CPU0 0x7>,*/
 			/*<&onic_pool 0x3>, <&onic_pool 0x7>,*/