nixos-riscv/fpga/upload.sh

#!/bin/sh

set -e
set -x

#dst=femu:nixos/
dst=fpgalogin1:nixos/

if [ "$1" != "" ]; then
  dst="$1"
fi

#rsync -a fpga/fpgactl "$dst"
#rsync -a fpga/boot.sh "$dst"
rsync -a fpga/env.sh "$dst"
#rsync "$OPENSBI/share/opensbi/lp64/fpga/openpiton/firmware/fw_payload.bin" "$dst/opensbi.bin"
rsync "$OPENSBI/share/opensbi/lp64d/fpga/ox_alveo/firmware/fw_payload.bin" "$dst/opensbi.bin"
rsync "$KERNEL/Image" "$dst/kernel.bin"
rsync "$INITRD/initrd" "$dst/initrd.bin"
rsync "$ROOTFS/sd-image/rootfs.img" "$dst/rootfs.img"
rsync "$UBOOT_ENV" "$dst/uboot.env"

echo "Now go to $dst and run ./boot.sh"
Add scripts to load FPGA system 2024-03-04 18:32:25 +01:00			`#!/bin/sh`

			`set -e`
			`set -x`

Remove unused PMEM regions Boots until the init, then fails with: [ 42.561840] Freeing unused kernel image (initmem) memory: 2448K [ 42.572360] Run /init as init process [ 42.577400] with arguments: [ 42.581780] /init [ 42.584520] with environment: [ 42.589320] HOME=/ [ 42.592140] TERM=linux [ 42.637580] init[1]: unhandled signal 4 code 0x1 at 0x0000003f966980d8 in ld-linux-riscv64-lp64d.so.1[3f96683000+23000] [ 42.650580] CPU: 0 PID: 1 Comm: init Not tainted 6.1.62 #1-NixOS [ 42.657720] Hardware name: Barcelona Supercomputing Center - Lagarto Ox (NixOS) (DT) [ 42.666760] epc : 0000003f966980d8 ra : 0000000000000000 sp : 0000003fe5c95db0 [ 42.675040] gp : ffffffff8197ea48 tp : 0000000000000000 t0 : 0000000000000000 [ 42.683320] t1 : 0000000000000000 t2 : 0000000000000000 s0 : 0000000000000000 [ 42.691600] s1 : 0000000000000000 a0 : 0000000000000000 a1 : 0000000000000000 [ 42.699880] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000 [ 42.708160] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000000 [ 42.716420] s2 : 0000000000000000 s3 : 0000000000000000 s4 : 0000000000000000 [ 42.724700] s5 : 0000000000000000 s6 : 0000000000000000 s7 : 0000000000000000 [ 42.733380] s8 : 0000000000000000 s9 : 0000000000000000 s10: 0000000000000000 [ 42.741660] s11: 0000000000000000 t3 : 0000000000000000 t4 : 0000000000000000 [ 42.749920] t5 : 0000000000000000 t6 : 0000000000000000 [ 42.756440] status: 0000000200004020 badaddr: 0000000000010513 cause: 0000000000000002 [ 42.767620] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 42.775720] CPU: 0 PID: 1 Comm: init Not tainted 6.1.62 #1-NixOS [ 42.782320] Hardware name: Barcelona Supercomputing Center - Lagarto Ox (NixOS) (DT) [ 42.790460] Call Trace: [ 42.793380] [<ffffffff800070c4>] dump_backtrace+0x38/0x48 [ 42.799520] [<ffffffff809f063c>] show_stack+0x50/0x68 [ 42.805280] [<ffffffff809fd1f8>] dump_stack_lvl+0x60/0x84 [ 42.811400] [<ffffffff809fd23c>] dump_stack+0x20/0x30 [ 42.817140] [<ffffffff809f0918>] panic+0x160/0x390 [ 42.822620] [<ffffffff80020184>] do_exit+0xa70/0xa78 [ 42.828260] [<ffffffff800203a4>] do_group_exit+0x44/0xb0 [ 42.834240] [<ffffffff80031eec>] get_signal+0x9b4/0xa00 [ 42.840140] [<ffffffff80005ca0>] do_work_pending+0x18c/0x610 [ 42.846480] [<ffffffff80003880>] resume_userspace_slow+0x10/0x14 [ 42.853420] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 ]--- 2024-06-28 14:36:32 +02:00			`#dst=femu:nixos/`
			`dst=fpgalogin1:nixos/`
Add scripts to load FPGA system 2024-03-04 18:32:25 +01:00
WIP 2024-05-28 18:12:14 +02:00			`if [ "$1" != "" ]; then`
			`dst="$1"`
			`fi`

Remove unused PMEM regions Boots until the init, then fails with: [ 42.561840] Freeing unused kernel image (initmem) memory: 2448K [ 42.572360] Run /init as init process [ 42.577400] with arguments: [ 42.581780] /init [ 42.584520] with environment: [ 42.589320] HOME=/ [ 42.592140] TERM=linux [ 42.637580] init[1]: unhandled signal 4 code 0x1 at 0x0000003f966980d8 in ld-linux-riscv64-lp64d.so.1[3f96683000+23000] [ 42.650580] CPU: 0 PID: 1 Comm: init Not tainted 6.1.62 #1-NixOS [ 42.657720] Hardware name: Barcelona Supercomputing Center - Lagarto Ox (NixOS) (DT) [ 42.666760] epc : 0000003f966980d8 ra : 0000000000000000 sp : 0000003fe5c95db0 [ 42.675040] gp : ffffffff8197ea48 tp : 0000000000000000 t0 : 0000000000000000 [ 42.683320] t1 : 0000000000000000 t2 : 0000000000000000 s0 : 0000000000000000 [ 42.691600] s1 : 0000000000000000 a0 : 0000000000000000 a1 : 0000000000000000 [ 42.699880] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000 [ 42.708160] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000000 [ 42.716420] s2 : 0000000000000000 s3 : 0000000000000000 s4 : 0000000000000000 [ 42.724700] s5 : 0000000000000000 s6 : 0000000000000000 s7 : 0000000000000000 [ 42.733380] s8 : 0000000000000000 s9 : 0000000000000000 s10: 0000000000000000 [ 42.741660] s11: 0000000000000000 t3 : 0000000000000000 t4 : 0000000000000000 [ 42.749920] t5 : 0000000000000000 t6 : 0000000000000000 [ 42.756440] status: 0000000200004020 badaddr: 0000000000010513 cause: 0000000000000002 [ 42.767620] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 42.775720] CPU: 0 PID: 1 Comm: init Not tainted 6.1.62 #1-NixOS [ 42.782320] Hardware name: Barcelona Supercomputing Center - Lagarto Ox (NixOS) (DT) [ 42.790460] Call Trace: [ 42.793380] [<ffffffff800070c4>] dump_backtrace+0x38/0x48 [ 42.799520] [<ffffffff809f063c>] show_stack+0x50/0x68 [ 42.805280] [<ffffffff809fd1f8>] dump_stack_lvl+0x60/0x84 [ 42.811400] [<ffffffff809fd23c>] dump_stack+0x20/0x30 [ 42.817140] [<ffffffff809f0918>] panic+0x160/0x390 [ 42.822620] [<ffffffff80020184>] do_exit+0xa70/0xa78 [ 42.828260] [<ffffffff800203a4>] do_group_exit+0x44/0xb0 [ 42.834240] [<ffffffff80031eec>] get_signal+0x9b4/0xa00 [ 42.840140] [<ffffffff80005ca0>] do_work_pending+0x18c/0x610 [ 42.846480] [<ffffffff80003880>] resume_userspace_slow+0x10/0x14 [ 42.853420] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 ]--- 2024-06-28 14:36:32 +02:00			`#rsync -a fpga/fpgactl "$dst"`
			`#rsync -a fpga/boot.sh "$dst"`
Add scripts to load FPGA system 2024-03-04 18:32:25 +01:00			`rsync -a fpga/env.sh "$dst"`
Remove unused PMEM regions Boots until the init, then fails with: [ 42.561840] Freeing unused kernel image (initmem) memory: 2448K [ 42.572360] Run /init as init process [ 42.577400] with arguments: [ 42.581780] /init [ 42.584520] with environment: [ 42.589320] HOME=/ [ 42.592140] TERM=linux [ 42.637580] init[1]: unhandled signal 4 code 0x1 at 0x0000003f966980d8 in ld-linux-riscv64-lp64d.so.1[3f96683000+23000] [ 42.650580] CPU: 0 PID: 1 Comm: init Not tainted 6.1.62 #1-NixOS [ 42.657720] Hardware name: Barcelona Supercomputing Center - Lagarto Ox (NixOS) (DT) [ 42.666760] epc : 0000003f966980d8 ra : 0000000000000000 sp : 0000003fe5c95db0 [ 42.675040] gp : ffffffff8197ea48 tp : 0000000000000000 t0 : 0000000000000000 [ 42.683320] t1 : 0000000000000000 t2 : 0000000000000000 s0 : 0000000000000000 [ 42.691600] s1 : 0000000000000000 a0 : 0000000000000000 a1 : 0000000000000000 [ 42.699880] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000 [ 42.708160] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000000 [ 42.716420] s2 : 0000000000000000 s3 : 0000000000000000 s4 : 0000000000000000 [ 42.724700] s5 : 0000000000000000 s6 : 0000000000000000 s7 : 0000000000000000 [ 42.733380] s8 : 0000000000000000 s9 : 0000000000000000 s10: 0000000000000000 [ 42.741660] s11: 0000000000000000 t3 : 0000000000000000 t4 : 0000000000000000 [ 42.749920] t5 : 0000000000000000 t6 : 0000000000000000 [ 42.756440] status: 0000000200004020 badaddr: 0000000000010513 cause: 0000000000000002 [ 42.767620] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 42.775720] CPU: 0 PID: 1 Comm: init Not tainted 6.1.62 #1-NixOS [ 42.782320] Hardware name: Barcelona Supercomputing Center - Lagarto Ox (NixOS) (DT) [ 42.790460] Call Trace: [ 42.793380] [<ffffffff800070c4>] dump_backtrace+0x38/0x48 [ 42.799520] [<ffffffff809f063c>] show_stack+0x50/0x68 [ 42.805280] [<ffffffff809fd1f8>] dump_stack_lvl+0x60/0x84 [ 42.811400] [<ffffffff809fd23c>] dump_stack+0x20/0x30 [ 42.817140] [<ffffffff809f0918>] panic+0x160/0x390 [ 42.822620] [<ffffffff80020184>] do_exit+0xa70/0xa78 [ 42.828260] [<ffffffff800203a4>] do_group_exit+0x44/0xb0 [ 42.834240] [<ffffffff80031eec>] get_signal+0x9b4/0xa00 [ 42.840140] [<ffffffff80005ca0>] do_work_pending+0x18c/0x610 [ 42.846480] [<ffffffff80003880>] resume_userspace_slow+0x10/0x14 [ 42.853420] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 ]--- 2024-06-28 14:36:32 +02:00			`#rsync "$OPENSBI/share/opensbi/lp64/fpga/openpiton/firmware/fw_payload.bin" "$dst/opensbi.bin"`
			`rsync "$OPENSBI/share/opensbi/lp64d/fpga/ox_alveo/firmware/fw_payload.bin" "$dst/opensbi.bin"`
Add scripts to load FPGA system 2024-03-04 18:32:25 +01:00			`rsync "$KERNEL/Image" "$dst/kernel.bin"`
			`rsync "$INITRD/initrd" "$dst/initrd.bin"`
Hangs in swtich_root in stage1 2024-07-01 10:14:39 +02:00			`rsync "$ROOTFS/sd-image/rootfs.img" "$dst/rootfs.img"`
Generate U-Boot commands 2024-03-07 16:49:48 +01:00			`rsync "$UBOOT_ENV" "$dst/uboot.env"`
Add scripts to load FPGA system 2024-03-04 18:32:25 +01:00
			`echo "Now go to $dst and run ./boot.sh"`