nixos-riscv/patches/alveo-uart-sbi-hack.patch

diff --git a/include/sbi_utils/serial/alveo_uart.h b/include/sbi_utils/serial/alveo_uart.h
new file mode 100644
index 0000000..0b6408c
--- /dev/null
+++ b/include/sbi_utils/serial/alveo_uart.h
@@ -0,0 +1,13 @@
+/*
+ * SPDX-License-Identifier: BSD-2-Clause
+ */
+
+#ifndef __SERIAL_ALVEO_UART_H__
+#define __SERIAL_ALVEO_UART_H__
+
+#include <sbi/sbi_types.h>
+
+int alveo_uart_init(unsigned long base, u32 in_freq, u32 baudrate, u32 reg_shift,
+		  u32 reg_width, u32 reg_offset);
+
+#endif
diff --git a/lib/utils/serial/Kconfig b/lib/utils/serial/Kconfig
index e3589ca..b754c7c 100644
--- a/lib/utils/serial/Kconfig
+++ b/lib/utils/serial/Kconfig
@@ -84,6 +84,10 @@ config SERIAL_UART8250
 	bool "8250 UART support"
 	default n
 
+config SERIAL_ALVEO_UART
+	bool "ALveo UART support"
+	default n
+
 config SERIAL_XILINX_UARTLITE
 	bool "Xilinx UART Lite support"
 	default n
diff --git a/lib/utils/serial/alveo_uart.c b/lib/utils/serial/alveo_uart.c
new file mode 100644
index 0000000..a351741
--- /dev/null
+++ b/lib/utils/serial/alveo_uart.c
@@ -0,0 +1,123 @@
+/*
+ * SPDX-License-Identifier: BSD-2-Clause
+ */
+
+#include <sbi/riscv_io.h>
+#include <sbi/sbi_console.h>
+#include <sbi_utils/serial/alveo_uart.h>
+
+/* clang-format off */
+
+#define UART_RBR_OFFSET		0	/* In:  Recieve Buffer Register */
+#define UART_THR_OFFSET		0	/* Out: Transmitter Holding Register */
+#define UART_DLL_OFFSET		0	/* Out: Divisor Latch Low */
+#define UART_IER_OFFSET		1	/* I/O: Interrupt Enable Register */
+#define UART_DLM_OFFSET		1	/* Out: Divisor Latch High */
+#define UART_FCR_OFFSET		2	/* Out: FIFO Control Register */
+#define UART_IIR_OFFSET		2	/* I/O: Interrupt Identification Register */
+#define UART_LCR_OFFSET		3	/* Out: Line Control Register */
+#define UART_MCR_OFFSET		4	/* Out: Modem Control Register */
+#define UART_LSR_OFFSET		5	/* In:  Line Status Register */
+#define UART_MSR_OFFSET		6	/* In:  Modem Status Register */
+#define UART_SCR_OFFSET		7	/* I/O: Scratch Register */
+#define UART_MDR1_OFFSET	8	/* I/O:  Mode Register */
+
+#define UART_LSR_FIFOE		0x80	/* Fifo error */
+#define UART_LSR_TEMT		0x40	/* Transmitter empty */
+#define UART_LSR_THRE		0x20	/* Transmit-hold-register empty */
+#define UART_LSR_BI		0x10	/* Break interrupt indicator */
+#define UART_LSR_FE		0x08	/* Frame error indicator */
+#define UART_LSR_PE		0x04	/* Parity error indicator */
+#define UART_LSR_OE		0x02	/* Overrun error indicator */
+#define UART_LSR_DR		0x01	/* Receiver data ready */
+#define UART_LSR_BRK_ERROR_BITS	0x1E	/* BI, FE, PE, OE bits */
+
+/* clang-format on */
+
+static volatile char *alveo_uart_base;
+static u32 alveo_uart_in_freq;
+static u32 alveo_uart_baudrate;
+static u32 alveo_uart_reg_width;
+static u32 alveo_uart_reg_shift;
+
+static u32 get_reg(u32 num)
+{
+	u32 offset = num << alveo_uart_reg_shift;
+
+	if (alveo_uart_reg_width == 1)
+		return readb(alveo_uart_base + offset);
+	else if (alveo_uart_reg_width == 2)
+		return readw(alveo_uart_base + offset);
+	else
+		return readl(alveo_uart_base + offset);
+}
+
+static void set_reg(u32 num, u32 val)
+{
+	u32 offset = num << alveo_uart_reg_shift;
+
+	if (alveo_uart_reg_width == 1)
+		writeb(val, alveo_uart_base + offset);
+	else if (alveo_uart_reg_width == 2)
+		writew(val, alveo_uart_base + offset);
+	else
+		writel(val, alveo_uart_base + offset);
+}
+
+static void alveo_uart_putc(char ch)
+{
+	while (!(get_reg(UART_LSR_OFFSET) & UART_LSR_TEMT))
+		;
+
+	set_reg(UART_THR_OFFSET, ch);
+}
+
+static int alveo_uart_getc(void)
+{
+	if (get_reg(UART_LSR_OFFSET) & UART_LSR_DR)
+		return get_reg(UART_RBR_OFFSET);
+	return -1;
+}
+
+static struct sbi_console_device alveo_uart_console = {
+	.name = "alveo_uart",
+	.console_putc = alveo_uart_putc,
+	.console_getc = alveo_uart_getc
+};
+
+int alveo_uart_init(unsigned long base, u32 in_freq, u32 baudrate, u32 reg_shift,
+		  u32 reg_width, u32 reg_offset)
+{
+	u16 bdiv = 0;
+
+	alveo_uart_base      = (volatile char *)base + reg_offset;
+	alveo_uart_reg_shift = reg_shift;
+	alveo_uart_reg_width = reg_width;
+	alveo_uart_in_freq   = in_freq;
+	alveo_uart_baudrate  = baudrate;
+
+	if (alveo_uart_baudrate) {
+		bdiv = alveo_uart_in_freq / (16 * alveo_uart_baudrate);
+	}
+
+	/* Disable all interrupts */
+	set_reg(UART_IER_OFFSET, 0x00);
+	/* Enable DLAB */
+	set_reg(UART_LCR_OFFSET, 0x80);
+
+	if (bdiv) {
+		/* Set divisor low byte */
+		set_reg(UART_DLL_OFFSET, bdiv & 0xff);
+		/* Set divisor high byte */
+		set_reg(UART_DLM_OFFSET, (bdiv >> 8) & 0xff);
+	}
+
+	/* 8 bits, no parity, one stop bit */
+	set_reg(UART_LCR_OFFSET, 0x03); // previous was 0x0B
+    /* Disable all interrupts*/
+    set_reg(UART_IER_OFFSET, 0x00);
+
+	sbi_console_set_device(&alveo_uart_console);
+
+	return 0;
+}
diff --git a/lib/utils/serial/objects.mk b/lib/utils/serial/objects.mk
index 1e6bd2e..0268bdf 100644
--- a/lib/utils/serial/objects.mk
+++ b/lib/utils/serial/objects.mk
@@ -44,5 +44,6 @@ libsbiutils-objs-$(CONFIG_SERIAL_SHAKTI) += serial/shakti-uart.o
 libsbiutils-objs-$(CONFIG_SERIAL_SIFIVE) += serial/sifive-uart.o
 libsbiutils-objs-$(CONFIG_SERIAL_LITEX) += serial/litex-uart.o
 libsbiutils-objs-$(CONFIG_SERIAL_UART8250) += serial/uart8250.o
+libsbiutils-objs-$(CONFIG_SERIAL_ALVEO_UART) += serial/alveo_uart.o
 libsbiutils-objs-$(CONFIG_SERIAL_XILINX_UARTLITE) += serial/xlnx-uartlite.o
 libsbiutils-objs-$(CONFIG_SERIAL_SEMIHOSTING) += serial/semihosting.o
diff --git a/platform/fpga/sargantana_alveo/Kconfig b/platform/fpga/sargantana_alveo/Kconfig
new file mode 100644
index 0000000..bf3e7e6
--- /dev/null
+++ b/platform/fpga/sargantana_alveo/Kconfig
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: BSD-2-Clause
+
+config PLATFORM_SARGANTANA_ALVEO_FPGA
+	bool
+	select FDT
+	select IPI_MSWI
+	select IRQCHIP_PLIC
+	select SERIAL_ALVEO_UART
+	select TIMER_MTIMER
+	default y
diff --git a/platform/fpga/sargantana_alveo/configs/defconfig b/platform/fpga/sargantana_alveo/configs/defconfig
new file mode 100644
index 0000000..e69de29
diff --git a/platform/fpga/sargantana_alveo/objects.mk b/platform/fpga/sargantana_alveo/objects.mk
new file mode 100644
index 0000000..d444abe
--- /dev/null
+++ b/platform/fpga/sargantana_alveo/objects.mk
@@ -0,0 +1,87 @@
+#
+# SPDX-License-Identifier: BSD-2-Clause
+#
+# Copyright (c) 2019 Western Digital Corporation or its affiliates.
+#
+
+# Compiler pre-processor flags
+platform-cppflags-y =
+
+# C Compiler and assembler flags.
+platform-cflags-y =
+platform-asflags-y =
+
+# Linker flags: additional libraries and object files that the platform
+# code needs can be added here
+platform-ldflags-y =
+
+#
+# Command for platform specific "make run"
+# Useful for development and debugging on plaftform simulator (such as QEMU)
+#
+# platform-runcmd = your_platform_run.sh
+
+#
+# Platform RISC-V XLEN, ABI, ISA and Code Model configuration.
+# These are optional parameters but platforms can optionaly provide it.
+# Some of these are guessed based on GCC compiler capabilities
+#
+PLATFORM_RISCV_XLEN = 64
+PLATFORM_RISCV_ABI = lp64d
+PLATFORM_RISCV_ISA = rv64imafd
+PLATFORM_RISCV_CODE_MODEL = medany
+
+# Space separated list of object file names to be compiled for the platform
+platform-objs-y += platform.o
+
+#
+# If the platform support requires a builtin device tree file, the name of
+# the device tree compiled file should be specified here. The device tree
+# source file be in the form <dt file name>.dts
+#
+# platform-objs-y += <dt file name>.o
+
+# Firmware load address configuration. This is mandatory.
+FW_TEXT_START=0x80000000
+
+# Optional parameter for path to external FDT
+# FW_FDT_PATH="path to platform flattened device tree file"
+
+#
+# Dynamic firmware configuration.
+# Optional parameters are commented out. Uncomment and define these parameters
+# as needed.
+#
+FW_DYNAMIC=n
+
+#
+# Jump firmware configuration.
+# Optional parameters are commented out. Uncomment and define these parameters
+# as needed.
+#
+FW_JUMP=n
+# This needs to be 4MB aligned for 32-bit support
+# This needs to be 2MB aligned for 64-bit support
+# ifeq ($(PLATFORM_RISCV_XLEN), 32)
+# FW_JUMP_ADDR=0x80400000
+# else
+# FW_JUMP_ADDR=0x80200000
+# endif
+# FW_JUMP_FDT_ADDR=0x82200000
+
+#
+# Firmware with payload configuration.
+# Optional parameters are commented out. Uncomment and define these parameters
+# as needed.
+#
+FW_PAYLOAD=y
+# This needs to be 4MB aligned for 32-bit support
+# This needs to be 2MB aligned for 64-bit support
+ifeq ($(PLATFORM_RISCV_XLEN), 32)
+FW_PAYLOAD_OFFSET=0x400000
+else
+FW_PAYLOAD_OFFSET=0x200000
+endif
+FW_PAYLOAD_ALIGN=0x1000
+# FW_PAYLOAD_PATH="path to next boot stage binary image file"
+# FW_PAYLOAD_FDT_ADDR=0x82200000
diff --git a/platform/fpga/sargantana_alveo/platform.c b/platform/fpga/sargantana_alveo/platform.c
new file mode 100644
index 0000000..a359b34
--- /dev/null
+++ b/platform/fpga/sargantana_alveo/platform.c
@@ -0,0 +1,146 @@
+/*
+ * SPDX-License-Identifier: BSD-2-Clause
+ *
+ * Copyright (c) 2019 Western Digital Corporation or its affiliates.
+ */
+
+#include <sbi/riscv_asm.h>
+#include <sbi/riscv_encoding.h>
+#include <sbi/sbi_const.h>
+#include <sbi/sbi_platform.h>
+
+/*
+ * Include these files as needed.
+ * See objects.mk SARGANTANA_ALVEO_xxx configuration parameters.
+ */
+
+#include <sbi_utils/serial/alveo_uart.h>
+#include <sbi/sbi_timer.h>
+
+#define SARGANTANA_ALVEO_HART_COUNT		1
+
+#define SARGANTANA_ALVEO_UART_BASE_ADDR	0x40000000
+#define SARGANTANA_ALVEO_UART_OFFSET		0x1000
+//#define SARGANTANA_ALVEO_UART_ADDR			SARGANTANA_ALVEO_UART_BASE_ADDR + SARGANTANA_ALVEO_UART_XLNX_OFFSET
+#define SARGANTANA_ALVEO_UART_INPUT_FREQ	50000000
+#define SARGANTANA_ALVEO_UART_BAUDRATE		115200
+
+#define SARGANTANA_ALVEO_TIMER_BASE		0x40170000
+#define ADDR_TIME_L 					0x0u // 32 lower bits of the time register
+#define ADDR_TIME_H 					0x1u // 32 higher bits of the time register
+#define ADDR_TIMECMP_L 					0x2u // 32 lower bits of the time comparator
+#define ADDR_TIMECMP_H 					0x3u // 32 higher bits of the time comparator
+
+volatile uint32_t *timer_base_ptr = (uint32_t *)(SARGANTANA_ALVEO_TIMER_BASE);
+
+/*
+ * Platform early initialization.
+ */
+static int sargantana_alveo_early_init(bool cold_boot)
+{
+	return 0;
+}
+
+/*
+ * Platform final initialization.
+ */
+static int sargantana_alveo_final_init(bool cold_boot)
+{
+	return 0;
+}
+
+/*
+ * Initialize the platform console.
+ */
+static int sargantana_alveo_console_init(void)
+{
+	return alveo_uart_init(SARGANTANA_ALVEO_UART_BASE_ADDR,
+						SARGANTANA_ALVEO_UART_INPUT_FREQ,
+			     		SARGANTANA_ALVEO_UART_BAUDRATE,
+						2, 4,
+						SARGANTANA_ALVEO_UART_OFFSET);
+}
+
+/*
+ * Initialize the platform interrupt controller for current HART.
+ */
+static int sargantana_alveo_irqchip_init(bool cold_boot)
+{
+	u32 hartid = current_hartid();
+	return hartid;
+}
+
+/*
+ * Initialize IPI for current HART.
+ */
+static int sargantana_alveo_ipi_init(bool cold_boot)
+{
+	return 0;
+}
+
+/*
+ * Get platform timer value.
+ */
+static u64 sargantana_alveo_timer_value(void)
+{
+	return ((u64)*(timer_base_ptr + ADDR_TIME_H) << 32) + *(timer_base_ptr + ADDR_TIME_L);
+}
+
+/*
+ * Start platform timer event for current HART.
+ */
+static void sargantana_alveo_timer_event_start(u64 next_event)
+{
+	*(timer_base_ptr + ADDR_TIMECMP_H) = next_event >> 32;
+    *(timer_base_ptr + ADDR_TIMECMP_L) = next_event;
+}
+
+/*
+ * Stop platform timer event for current HART.
+ */
+static void sargantana_alveo_timer_event_stop(void)
+{
+
+    *(timer_base_ptr + ADDR_TIMECMP_H) = 0;
+    *(timer_base_ptr + ADDR_TIMECMP_L) = 0;
+}
+
+static struct sbi_timer_device mtimer = {
+	.name = "generic_timer", // TODO Where the timer comes from? I would prefer a better name :p
+	.timer_freq = SARGANTANA_ALVEO_UART_INPUT_FREQ,
+	.timer_value = sargantana_alveo_timer_value,
+	.timer_event_start = sargantana_alveo_timer_event_start,
+	.timer_event_stop = sargantana_alveo_timer_event_stop
+};
+
+/*
+ * Initialize platform timer for current HART.
+ */
+static int sargantana_alveo_timer_init(bool cold_boot)
+{
+	*(timer_base_ptr + ADDR_TIMECMP_H) = 0;
+    *(timer_base_ptr + ADDR_TIMECMP_L) = 0;
+	sbi_timer_set_device(&mtimer);
+	return 0;
+}
+
+/*
+ * Platform descriptor.
+ */
+const struct sbi_platform_operations sargantana_alveo_ops = {
+	.early_init		= sargantana_alveo_early_init,
+	.final_init		= sargantana_alveo_final_init,
+	.console_init	= sargantana_alveo_console_init,
+	.irqchip_init	= sargantana_alveo_irqchip_init,
+	.ipi_init		= sargantana_alveo_ipi_init,
+	.timer_init		= sargantana_alveo_timer_init
+};
+const struct sbi_platform platform = {
+	.opensbi_version	= OPENSBI_VERSION,
+	.platform_version	= SBI_PLATFORM_VERSION(0x0, 0x01),
+	.name				= "Sargantana (for Xilinx Alveo FPGA)",
+	.features			= SBI_PLATFORM_DEFAULT_FEATURES,
+	.hart_count			= SARGANTANA_ALVEO_HART_COUNT,
+	.hart_stack_size	= SBI_PLATFORM_DEFAULT_HART_STACK_SIZE,
+	.platform_ops_addr	= (unsigned long)&sargantana_alveo_ops
+};