Add TAOpenCL

See: https://lkml.org/lkml/2025/4/9/1709

flake.lock

@@ -2,11 +2,11 @@
   "nodes": {
     "nixpkgs": {
       "locked": {
-        "lastModified": 1767634882,
+        "lastModified": 1764522689,
-        "narHash": "sha256-2GffSfQxe3sedHzK+sTKlYo/NTIAGzbFCIsNMUPAAnk=",
+        "narHash": "sha256-SqUuBFjhl/kpDiVaKLQBoD8TLD+/cTUzzgVFoaHrkqY=",
         "owner": "NixOS",
         "repo": "nixpkgs",
-        "rev": "3c9db02515ef1d9b6b709fc60ba9a540957f661c",
+        "rev": "8bb5646e0bed5dbd3ab08c7a7cc15b75ab4e1d0f",
         "type": "github"
       },
       "original": {

m/apex/configuration.nix

@@ -57,18 +57,6 @@
     };
   };
 
-  services.fail2ban = {
-    enable = true;
-    maxretry = 5;
-    bantime-increment = {
-      enable = true; # Double ban time on each attack
-      maxtime = "7d"; # Ban up to a week
-    };
-  };
-
-  # Disable SSH login with password, allow only keypair
-  services.openssh.settings.PasswordAuthentication = false;
-
   networking.firewall = {
     extraCommands = ''
       # Blackhole BSC vulnerability scanner (OpenVAS) as it is spamming our

m/bay/configuration.nix

@@ -24,7 +24,7 @@
       address = "10.0.40.40";
       prefixLength = 24;
     } ];
-    interfaces.ibs785.ipv4.addresses = [ {
+    interfaces.ibp5s0.ipv4.addresses = [ {
       address = "10.0.42.40";
       prefixLength = 24;
     } ];

m/common/base/env.nix

@@ -2,36 +2,11 @@
 
 {
   environment.systemPackages = with pkgs; [
-    cmake
+    vim wget git htop tmux pciutils tcpdump ripgrep nix-index nixos-option
-    ethtool
+    nix-diff ipmitool freeipmi ethtool lm_sensors cmake gnumake file tree
-    file
+    ncdu perf ldns pv
-    freeipmi
-    git
-    gnumake
-    home-manager
-    htop
-    ipmitool
-    ldns
-    lm_sensors
-    ncdu
-    nix-diff
-    nix-index
-    nix-output-monitor
-    nixfmt-tree
-    nixos-option
-    pciutils
-    perf
-    pv
-    ripgrep
-    tcpdump
-    tmux
-    tree
-    vim
-    wget
-
     # From jungle overlay
-    nixgen
+    osumb nixgen
-    osumb
   ];
 
   programs.direnv.enable = true;

m/common/base/users.nix

@@ -139,7 +139,6 @@
         openssh.authorizedKeys.keys = [
           "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIKGt0ESYxekBiHJQowmKpfdouw0hVm3N7tUMtAaeLejK vincent@varch"
         ];
-        shell = pkgs.zsh;
       };
 
       pmartin1 = {
@@ -194,32 +193,6 @@
           "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIOlRX7ZCnqtUJYCxKgWmgSrFCYuA2LHY96rVwqxXPl86 aaguirre@BSC-8488184117"
         ];
       };
-
-      emonteir = {
-        uid = 9656;
-        isNormalUser = true;
-        home = "/home/Computational/emonteir";
-        description = "Erwin Royson Monteiro";
-        group = "Computational";
-        hosts = [ "apex" "fox" ];
-        hashedPassword = "$6$0mU88zd3ZuK5NiJQ$DFWL5RMLH6esQM5UyhBCiiNryw4lDDmvJp7Usz3tmevnsiSJr6u0RsUKAnR/K8GRBFrV1.GocrgNjKjik5GY//";
-        openssh.authorizedKeys.keys = [
-          "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIOKZKot/Y3F5Wq9pQIXlCbyvQuVVeWMCsAC96Nd+LTcG erwin@Oreo"
-        ];
-      };
-
-      ssanzmar = {
-        uid = 9657;
-        isNormalUser = true;
-        home = "/home/Computational/ssanzmar";
-        description = "Sergio Sanz Martínez";
-        group = "Computational";
-        hosts = [ "apex" "fox" ];
-        hashedPassword = "$6$HUjNDJeJMmNQ6M64$laXSOZcXg6o4v2r8Jm8Xj9kmqw7veCY32po3TVDPRR4WlyxvOeqwoKr4NjlUlPPpKN55Oot3ZYHi.9iNXsH5E1";
-        openssh.authorizedKeys.keys = [
-          "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIIELrsRRHXryrdA2ZBx5XmdGxL4DC5bmJydhBeTWQ0SQ sergio.sanz.martinez@estudiantat.upc.edu"
-        ];
-      };
     };
 
     groups = {

m/eudy/kernel/perf.nix

@@ -1,6 +1,11 @@
-{ pkgs, lib, ... }:
+{ config, pkgs, lib, ... }:
 
 {
+  # add the perf tool
+  environment.systemPackages = with pkgs; [
+    config.boot.kernelPackages.perf
+  ];
+
   # allow non-root users to read tracing data from the kernel
   boot.kernel.sysctl."kernel.perf_event_paranoid" = -2;
   boot.kernel.sysctl."kernel.kptr_restrict" = 0;

m/hut/configuration.nix

@@ -45,7 +45,7 @@
       address = "10.0.40.7";
       prefixLength = 24;
     } ];
-    interfaces.ibs785.ipv4.addresses = [ {
+    interfaces.ibp5s0.ipv4.addresses = [ {
       address = "10.0.42.7";
       prefixLength = 24;
     } ];

m/hut/nginx.nix

@@ -4,8 +4,8 @@ let
     name = "jungle-web";
     src = pkgs.fetchgit {
       url = "https://jungle.bsc.es/git/rarias/jungle-website.git";
-      rev = "5f18335d14126d2fef134c0cd441771436f7dfa1";
+      rev = "52abaf4d71652a9ef77a0b098db14ca33bffff4c";
-      hash = "sha256-s9VBF91sQ7hg9+lrwNFPYgoXTTyXaQcAulCiGJgWERo=";
+      hash = "sha256-/ul9GazbOrOkmlvSgDz/+2W+V+ir5725Y7mVLc3rb0M=";
     };
     buildInputs = [ pkgs.hugo ];
     buildPhase = ''

m/lake2/configuration.nix

@@ -46,7 +46,7 @@
       address = "10.0.40.42";
       prefixLength = 24;
     } ];
-    interfaces.ibs785.ipv4.addresses = [ {
+    interfaces.ibp5s0.ipv4.addresses = [ {
       address = "10.0.42.42";
       prefixLength = 24;
     } ];

m/module/tc1-board.nix

@@ -1,27 +0,0 @@
-{ lib, pkgs, ... }:
-
-{
-  # Allow user access to FTDI USB device
-  services.udev.packages = lib.singleton (pkgs.writeTextFile {
-    # Needs to be < 73
-    name = "60-ftdi-tc1.rules";
-    text = ''
-      # Bus 003 Device 003: ID 0403:6011 Future Technology Devices International, Ltd FT4232H Quad HS USB-UART/FIFO IC
-      # Use := to make sure it doesn't get changed later
-      SUBSYSTEMS=="usb", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6011", MODE:="0666"
-    '';
-    destination = "/etc/udev/rules.d/60-ftdi-tc1.rules";
-  });
-
-  # Allow access to USB for docker in GitLab runner
-  services.gitlab-runner = {
-    services.gitlab-bsc-docker = {
-      registrationFlags = [
-        # We need raw access to the USB port to reboot the board
-        "--docker-devices /dev/bus/usb/003/003"
-        # And TTY access for the serial port
-        "--docker-devices /dev/ttyUSB2"
-      ];
-    };
-  };
-}

m/owl1/configuration.nix

@@ -20,7 +20,7 @@
       address = "10.0.40.1";
       prefixLength = 24;
     } ];
-    interfaces.ibs785.ipv4.addresses = [ {
+    interfaces.ibp5s0.ipv4.addresses = [ {
       address = "10.0.42.1";
       prefixLength = 24;
     } ];

m/owl2/configuration.nix

@@ -21,7 +21,7 @@
       prefixLength = 24;
     } ];
     # Watch out! The OmniPath device is not in the same place here:
-    interfaces.ibs801.ipv4.addresses = [ {
+    interfaces.ibp129s0.ipv4.addresses = [ {
       address = "10.0.42.2";
       prefixLength = 24;
     } ];

m/tent/configuration.nix

@@ -16,7 +16,6 @@
     ../module/p.nix
     ../module/vpn-dac.nix
     ../module/hut-substituter.nix
-    ../module/tc1-board.nix
   ];
 
   # Select the this using the ID to avoid mismatches

m/tent/gitea.nix

@@ -27,7 +27,4 @@
       };
     };
   };
-
-  # Allow gitea user to send mail
-  users.users.gitea.extraGroups = [ "mail-robot" ];
 }

m/tent/nginx.nix

@@ -4,8 +4,8 @@ let
     name = "jungle-web";
     src = pkgs.fetchgit {
       url = "https://jungle.bsc.es/git/rarias/jungle-website.git";
-      rev = "5f18335d14126d2fef134c0cd441771436f7dfa1";
+      rev = "52abaf4d71652a9ef77a0b098db14ca33bffff4c";
-      hash = "sha256-s9VBF91sQ7hg9+lrwNFPYgoXTTyXaQcAulCiGJgWERo=";
+      hash = "sha256-/ul9GazbOrOkmlvSgDz/+2W+V+ir5725Y7mVLc3rb0M=";
     };
     buildInputs = [ pkgs.hugo ];
     buildPhase = ''

overlay.nix

@@ -62,7 +62,14 @@ let
     tagaspi = callPackage ./pkgs/tagaspi/default.nix { };
     tampi = callPackage ./pkgs/tampi/default.nix { };
     upc-qaire-exporter = prev.callPackage ./pkgs/upc-qaire-exporter/default.nix { };
+    taopencl = callPackage ./pkgs/taopencl/default.nix { };
     wxparaver = callPackage ./pkgs/paraver/default.nix { };
+
+    _cuda = prev._cuda.extend (_: _prev: final.lib.recursiveUpdate _prev {
+      extensions = _prev.extensions ++ [(finalAttrs: _: {
+        tacuda = finalAttrs.callPackage ./pkgs/tacuda/default.nix { };
+      })];
+    });
   };
 
   tests = rec {

pkgs/tacuda/default.nix

@@ -0,0 +1,72 @@
+{
+  backendStdenv,
+  fetchFromGitHub,
+  automake,
+  autoconf,
+  libtool,
+  gnumake,
+  autoreconfHook,
+  boost,
+  cudatoolkit,
+  libcublas,
+  cuda_cudart,
+
+  useGit ? false,
+  gitUrl ? "git@gitlab-internal.bsc.es:task-awareness/tacuda/tacuda.git",
+  gitBranch ? "main",
+  gitCommit ? "35234f9445e6149a2bd38d119841e2485d6ee05e",
+}:
+
+let
+
+  release_ver = "2.1.0";
+  release = {
+    version = release_ver;
+    src = fetchFromGitHub {
+      owner = "bsc-pm";
+      repo = "tacuda";
+      rev = release_ver;
+      hash = "sha256-Cj3EiLVJSLvRv0ydeg7Vp4SpkniEqHkcWF+YOJQ8EcM=";
+    };
+  };
+
+  git = rec {
+    version = src.shortRev;
+    src = builtins.fetchGit {
+      url = gitUrl;
+      ref = gitBranch;
+      rev = gitCommit;
+    };
+  };
+
+  source = if (useGit) then git else release;
+
+in
+
+backendStdenv.mkDerivation {
+  pname = "tacuda";
+  inherit (source) src version;
+
+  enableParallelBuilding = true;
+  separateDebugInfo = true;
+  strictDeps = true;
+
+  nativeBuildInputs = [
+    autoreconfHook
+    automake
+    autoconf
+    libtool
+    gnumake
+  ];
+
+  patches = [ ./fix_config.patch ];
+
+  configureFlags = [ "--with-cuda-include=${cudatoolkit}/include" ];
+
+  buildInputs = [
+    boost
+    libcublas
+    cuda_cudart
+  ];
+
+}

pkgs/tacuda/fix_config.patch

@@ -0,0 +1,13 @@
+diff --git a/m4/cuda.m4 b/m4/cuda.m4
+index 23f5c94..8f9b534 100644
+--- a/m4/cuda.m4
++++ b/m4/cuda.m4
+@@ -40,7 +40,7 @@ search_libs="cuda cublas cudart"
+ required_libs=""
+ 
+ m4_foreach([function],
+-           [cuInit,
++           [
+ 	    cublasSgemm,
+             cudaStreamCreate,
+             cudaLaunchKernel,

pkgs/taopencl/default.nix

@@ -0,0 +1,48 @@
+{
+  stdenv,
+  automake,
+  autoconf,
+  libtool,
+  gnumake,
+  boost,
+  mpi,
+  autoreconfHook,
+  ocl-icd,
+  opencl-headers,
+}:
+
+stdenv.mkDerivation (finalAttrs: {
+  pname = "taopencl";
+  version = finalAttrs.src.shortRev;
+
+  src = builtins.fetchGit {
+    url = "git@gitlab-internal.bsc.es:task-awareness/taopencl/taopencl.git";
+    ref = "master";
+    rev = "c3b7b32ae8fa4af7ceff598532a881f8f1490aaf";
+  };
+
+  enableParallelBuilding = true;
+  separateDebugInfo = true;
+  strictDeps = true;
+
+  configureFlags = [
+    "--with-opencl-lib=${ocl-icd}/lib"
+    "--with-opencl-include=${opencl-headers}/include"
+  ];
+
+  nativeBuildInputs = [
+    autoreconfHook
+    automake
+    autoconf
+    libtool
+    gnumake
+  ];
+
+  buildInputs = [
+    boost
+    mpi
+  ];
+
+  dontDisableStatic = true;
+  hardeningDisable = [ "all" ];
+})