Enable watchdog

The disk ID is different under NixOS.

.gitignore

@@ -0,0 +1,2 @@
+*.swp
+/result

doc/install.md

@@ -0,0 +1,152 @@
+# Installing NixOS in a new node
+
+This article shows the steps to install NixOS in a node following the
+configuration of the repo.
+
+## Enable the serial console
+
+By default, the nodes have the serial console disabled in the GRUB and also boot
+without the serial enabled.
+
+To enable the serial console in the GRUB, set in /etc/default/grub the following
+lines:
+
+```
+GRUB_TERMINAL="console serial"
+GRUB_SERIAL_COMMAND="serial --speed=115200 --unit=0 --word=8 --parity=no --stop=1"
+```
+
+To boot Linux with the serial enabled, so you can see the boot log and login via
+serial set:
+
+```
+GRUB_CMDLINE_LINUX="console=ttyS0,115200n8 console=tty0"
+```
+
+Then update the grub config:
+
+```
+# grub2-mkconfig -o /boot/grub2/grub.cfg
+```
+
+And reboot.
+
+## Prepare the disk
+
+Create a main partition and label it `nixos` following [the manual][1].
+
+[1]: https://nixos.org/manual/nixos/stable/index.html#sec-installation-manual-partitioning.
+
+```
+# disk=/dev/sdX
+# parted $disk -- mklabel msdos
+# parted $disk -- mkpart primary 1MB -8GB
+# parted $disk -- mkpart primary linux-swap -8GB 100%
+# parted $disk -- set 1 boot on
+```
+
+Then create an etx4 filesystem, labeled `nixos` where the system will be
+installed. **Ensure that no other partition has the same label.**
+
+```
+# mkfs.ext4 -L nixos "${disk}1"
+# mkswap -L swap "${disk}2"
+# mount ${disk}1 /mnt
+# lsblk -f $disk
+NAME   FSTYPE LABEL UUID                                 MOUNTPOINT
+sdX
+`-sdX1 ext4   nixos 10d73b75-809c-4fa3-b99d-4fab2f0d0d8e /mnt
+```
+
+## Prepare nix and nixos-install
+
+Mount the nix store from the hut node in read-only /nix.
+
+```
+# mkdir /nix
+# mount -o ro hut:/nix /nix
+```
+
+Get the nix binary and nixos-install tool from hut:
+
+```
+# ssh hut 'readlink -f $(which nix)'
+/nix/store/0sxbaj71c4c4n43qhdxm31f56gjalksw-nix-2.13.3/bin/nix
+# ssh hut 'readlink -f $(which nixos-install)'
+/nix/store/9yq8ps06ysr2pfiwiij39ny56yk3pdcs-nixos-install/bin/nixos-install
+```
+
+And add them to the PATH:
+
+```
+# export PATH=$PATH:/nix/store/0sxbaj71c4c4n43qhdxm31f56gjalksw-nix-2.13.3/bin
+# export PATH=$PATH:/nix/store/9yq8ps06ysr2pfiwiij39ny56yk3pdcs-nixos-install/bin/
+# nix --version
+nix (Nix) 2.13.3
+```
+
+## Adapt owl configuration
+
+Clone owl repo:
+
+```
+$ git clone git@bscpm03.bsc.es:rarias/owl.git
+$ cd owl
+```
+
+Edit the configuration to your needs.
+
+## Install from another Linux OS
+
+Install nixOS into the storage drive.
+
+```
+# nixos-install --flake --root /mnt .#xeon0X
+```
+
+At this point, the nixOS grub has been installed into the nixos device, which
+is not the default boot device. To keep both the old Linux and NixOS grubs, add
+an entry into the old Linux grub to jump into the new grub.
+
+```
+# echo "
+
+menuentry 'NixOS' {
+    insmod chain
+    search --no-floppy --label nixos --set root
+    configfile /boot/grub/grub.cfg
+} " >> /etc/grub.d/40_custom
+```
+
+Rebuild grub config.
+
+```
+# grub2-mkconfig -o /boot/grub/grub.cfg
+```
+
+To boot into NixOS manually, reboot and select NixOS in the grub menu to boot
+into NixOS.
+
+To temporarily boot into NixOS only on the next reboot run:
+
+```
+# grub2-reboot 'NixOS'
+```
+
+To permanently boot into NixOS as the default boot OS, edit `/etc/default/grub/`:
+
+```
+GRUB_DEFAULT='NixOS'
+```
+
+And update grub.
+
+```
+# grub2-mkconfig -o /boot/grub/grub.cfg
+```
+
+## Build the nixos kexec image
+
+```
+# nix build .#nixosConfigurations.xeon02.config.system.build.kexecTree -v
+```

flake.lock

@@ -0,0 +1,109 @@
+{
+  "nodes": {
+    "agenix": {
+      "inputs": {
+        "darwin": "darwin",
+        "home-manager": "home-manager",
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1690228878,
+        "narHash": "sha256-9Xe7JV0krp4RJC9W9W9WutZVlw6BlHTFMiUP/k48LQY=",
+        "owner": "ryantm",
+        "repo": "agenix",
+        "rev": "d8c973fd228949736dedf61b7f8cc1ece3236792",
+        "type": "github"
+      },
+      "original": {
+        "owner": "ryantm",
+        "repo": "agenix",
+        "type": "github"
+      }
+    },
+    "bscpkgs": {
+      "locked": {
+        "lastModified": 1690560045,
+        "narHash": "sha256-39ZP+FIzlWoN3c43hReBYpStg4RLYw/z7TdxCQmOvTM=",
+        "ref": "refs/heads/master",
+        "rev": "b4a20d7c3af854b39682484adfd1c7979319f439",
+        "revCount": 841,
+        "type": "git",
+        "url": "https://pm.bsc.es/gitlab/rarias/bscpkgs.git"
+      },
+      "original": {
+        "type": "git",
+        "url": "https://pm.bsc.es/gitlab/rarias/bscpkgs.git"
+      }
+    },
+    "darwin": {
+      "inputs": {
+        "nixpkgs": [
+          "agenix",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1673295039,
+        "narHash": "sha256-AsdYgE8/GPwcelGgrntlijMg4t3hLFJFCRF3tL5WVjA=",
+        "owner": "lnl7",
+        "repo": "nix-darwin",
+        "rev": "87b9d090ad39b25b2400029c64825fc2a8868943",
+        "type": "github"
+      },
+      "original": {
+        "owner": "lnl7",
+        "ref": "master",
+        "repo": "nix-darwin",
+        "type": "github"
+      }
+    },
+    "home-manager": {
+      "inputs": {
+        "nixpkgs": [
+          "agenix",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1682203081,
+        "narHash": "sha256-kRL4ejWDhi0zph/FpebFYhzqlOBrk0Pl3dzGEKSAlEw=",
+        "owner": "nix-community",
+        "repo": "home-manager",
+        "rev": "32d3e39c491e2f91152c84f8ad8b003420eab0a1",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-community",
+        "repo": "home-manager",
+        "type": "github"
+      }
+    },
+    "nixpkgs": {
+      "locked": {
+        "lastModified": 1692447944,
+        "narHash": "sha256-fkJGNjEmTPvqBs215EQU4r9ivecV5Qge5cF/QDLVn3U=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "d680ded26da5cf104dd2735a51e88d2d8f487b4d",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixos-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "root": {
+      "inputs": {
+        "agenix": "agenix",
+        "bscpkgs": "bscpkgs",
+        "nixpkgs": "nixpkgs"
+      }
+    }
+  },
+  "root": "root",
+  "version": 7
+}

flake.nix

@@ -0,0 +1,30 @@
+{
+  inputs = {
+    nixpkgs.url = "github:NixOS/nixpkgs/nixos-unstable";
+    agenix.url = "github:ryantm/agenix";
+    agenix.inputs.nixpkgs.follows = "nixpkgs";
+    bscpkgs.url = "git+https://pm.bsc.es/gitlab/rarias/bscpkgs.git";
+  };
+
+  outputs = { self, nixpkgs, agenix, bscpkgs, ... }:
+let
+  mkConf = name: nixpkgs.lib.nixosSystem {
+    system = "x86_64-linux";
+    specialArgs = { inherit nixpkgs bscpkgs agenix; theFlake = self; };
+    modules = [ "${self.outPath}/m/${name}/configuration.nix" ];
+  };
+in
+  {
+    nixosConfigurations = {
+      hut   = mkConf "hut";
+      owl1  = mkConf "owl1";
+      owl2  = mkConf "owl2";
+      eudy  = mkConf "eudy";
+      koro  = mkConf "koro";
+      bay   = mkConf "bay";
+      lake2 = mkConf "lake2";
+    };
+
+    packages.x86_64-linux.hut = self.nixosConfigurations.hut.pkgs;
+  };
+}

m/bay/configuration.nix

@@ -0,0 +1,98 @@
+{ config, pkgs, lib, ... }:
+
+{
+  imports = [
+    ../common/main.nix
+    ../common/monitoring.nix
+  ];
+
+  # Select the this using the ID to avoid mismatches
+  boot.loader.grub.device = "/dev/disk/by-id/wwn-0x55cd2e414d53562d";
+
+  environment.systemPackages = with pkgs; [
+    ceph
+  ];
+
+  services.slurm = {
+    client.enable = lib.mkForce false;
+  };
+
+  networking = {
+    hostName = "bay";
+    interfaces.eno1.ipv4.addresses = [ {
+      address = "10.0.40.40";
+      prefixLength = 24;
+    } ];
+    interfaces.ibp5s0.ipv4.addresses = [ {
+      address = "10.0.42.40";
+      prefixLength = 24;
+    } ];
+  };
+
+  services.ceph = {
+    enable = true;
+    global = {
+      fsid = "9c8d06e0-485f-4aaf-b16b-06d6daf1232b";
+      monHost = "10.0.42.40";
+      monInitialMembers = "10.0.42.40";
+      publicNetwork = "10.0.42.40/24";
+      clusterNetwork = "10.0.42.40/24";
+    };
+    extraConfig = {
+      # Only log to stderr so it appears in the journal
+      "log_file" = "/dev/null";
+      "mon_cluster_log_file" = "/dev/null";
+      "log_to_stderr" = "true";
+      "err_to_stderr" = "true";
+      "log_to_file" = "false";
+    };
+    mds = {
+      enable = true;
+      daemons = [ "mds0" "mds1" ];
+      extraConfig = {
+        "host" = "10.0.42.40";
+      };
+    };
+    mgr = {
+      enable = true;
+      daemons = [ "bay" ];
+    };
+    mon = {
+      enable = true;
+      daemons = [ "bay" ];
+    };
+    osd = {
+      enable = true;
+      # One daemon per NVME disk
+      daemons = [ "0" "1" "2" "3" ];
+      extraConfig = {
+        "osd crush chooseleaf type" = "0";
+        "osd journal size" = "10000";
+        "osd pool default min size" = "2";
+        "osd pool default pg num" = "200";
+        "osd pool default pgp num" = "200";
+        "osd pool default size" = "3";
+      };
+    };
+  };
+
+  # Missing service for volumes, see:
+  # https://www.reddit.com/r/ceph/comments/14otjyo/comment/jrd69vt/
+  systemd.services.ceph-volume = {
+    enable = true;
+    description = "Ceph Volume activation";
+    unitConfig = {
+      Type = "oneshot";
+      After = "local-fs.target";
+      Wants = "local-fs.target";
+    };
+    path = [ pkgs.ceph pkgs.util-linux pkgs.lvm2 pkgs.cryptsetup ];
+    serviceConfig = {
+      KillMode = "none";
+      Environment = "CEPH_VOLUME_TIMEOUT=10000";
+      ExecStart = "/bin/sh -c 'timeout $CEPH_VOLUME_TIMEOUT ${pkgs.ceph}/bin/ceph-volume lvm activate --all --no-systemd'";
+      TimeoutSec = "0";
+    };
+    wantedBy = [ "multi-user.target" ];
+  };
+}

m/common/boot.nix

@@ -0,0 +1,39 @@
+{ lib, pkgs, ... }:
+
+{
+  # Use the GRUB 2 boot loader.
+  boot.loader.grub.enable = lib.mkForce true;
+
+  # Enable GRUB2 serial console
+  boot.loader.grub.extraConfig = ''
+    serial --unit=0 --speed=115200 --word=8 --parity=no --stop=1
+    terminal_input --append serial
+    terminal_output --append serial
+  '';
+
+  # Enable serial console
+  boot.kernelParams = [
+    "console=tty1"
+    "console=ttyS0,115200"
+  ];
+
+  boot.kernel.sysctl = {
+    "kernel.perf_event_paranoid" = lib.mkDefault "-1";
+  };
+
+  boot.kernelPackages = pkgs.linuxPackages_latest;
+
+  #boot.kernelPatches = lib.singleton {
+  #  name = "osnoise-tracer";
+  #  patch = null;
+  #  extraStructuredConfig = with lib.kernel; {
+  #    OSNOISE_TRACER = yes;
+  #    HWLAT_TRACER = yes;
+  #  };
+  #};
+
+  boot.initrd.availableKernelModules = [ "ahci" "xhci_pci" "ehci_pci" "nvme" "usbhid" "sd_mod" ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ "kvm-intel" ];
+  boot.extraModulePackages = [ ];
+}

m/common/fs.nix

@@ -1,6 +1,15 @@
 { ... }:
 
 {
+  fileSystems."/" =
+    { device = "/dev/disk/by-label/nixos";
+      fsType = "ext4";
+    };
+
+  swapDevices =
+    [ { device = "/dev/disk/by-label/swap"; }
+    ];
+
   # Mount the home via NFS
   fileSystems."/home" = {
     device = "10.0.40.30:/home";

m/common/hw.nix

@@ -0,0 +1,14 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports =
+    [ (modulesPath + "/installer/scan/not-detected.nix")
+    ];
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+  powerManagement.cpuFreqGovernor = lib.mkDefault "powersave";
+  hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
+}

m/common/main.nix

@@ -1,21 +1,44 @@
-{ config, pkgs, ... }:
+{ config, pkgs, nixpkgs, bscpkgs, agenix, theFlake, ... }:
 
 {
   imports = [
-    ./hardware-configuration.nix
-
     ./boot.nix
     ./fs.nix
-    ./gitlab-runner.nix
+    ./hw.nix
-    ./monitoring.nix
     ./net.nix
-    ./nfs.nix
+    ./ntp.nix
-    ./overlays.nix
     ./slurm.nix
     ./ssh.nix
     ./users.nix
+    ./watchdog.nix
+  ];
 
-    <agenix/modules/age.nix>
+  nixpkgs.overlays = [
+    bscpkgs.bscOverlay
+    (import ../../pkgs/overlay.nix)
+  ];
+
+  nix.nixPath = [
+    "nixpkgs=${nixpkgs}"
+    "bscpkgs=${bscpkgs}"
+    "jungle=${theFlake.outPath}"
+  ];
+
+  nix.registry.nixpkgs.flake = nixpkgs;
+  nix.registry.bscpkgs.flake = bscpkgs;
+  nix.registry.jungle.flake = theFlake;
+
+  system.configurationRevision =
+    if theFlake ? rev
+    then theFlake.rev
+    else throw ("Refusing to build from a dirty Git tree!");
+
+  environment.systemPackages = with pkgs; [
+    vim wget git htop tmux pciutils tcpdump ripgrep nix-index nixos-option
+    nix-diff ipmitool freeipmi ethtool lm_sensors ix cmake gnumake file tree
+    ncdu config.boot.kernelPackages.perf ldns
+    # From bsckgs overlay
+    bsc.osumb
   ];
 
   systemd.services."serial-getty@ttyS0" = {
@@ -24,15 +47,19 @@
     serviceConfig.Restart = "always";
   };
 
+  # Increase limits
+  security.pam.loginLimits = [
+    {
+      domain = "*";
+      type = "-";
+      item = "memlock";
+      value = "1048576"; # 1 GiB of mem locked
+    }
+  ];
+
   time.timeZone = "Europe/Madrid";
   i18n.defaultLocale = "en_DK.UTF-8";
 
-  environment.systemPackages = with pkgs; [
-    vim wget git htop tmux pciutils tcpdump ripgrep nix-index nixos-option
-    nix-diff ipmitool freeipmi ethtool lm_sensors
-    (pkgs.callPackage <agenix/pkgs/agenix.nix> {})
-  ];
-
   environment.variables = {
     EDITOR = "vim";
     VISUAL = "vim";
@@ -43,14 +70,19 @@
   nix.settings.trusted-users = [ "@wheel" ];
   nix.gc.automatic = true;
   nix.gc.dates = "weekly";
+  nix.gc.options = "--delete-older-than 30d";
 
   programs.zsh.enable = true;
   programs.zsh.histSize = 100000;
 
+  programs.bash.promptInit = ''
+    PS1="\h\\$ "
+  '';
+
   # Copy the NixOS configuration file and link it from the resulting system
   # (/run/current-system/configuration.nix). This is useful in case you
   # accidentally delete configuration.nix.
-  system.copySystemConfiguration = true;
+  #system.copySystemConfiguration = true;
 
   # This value determines the NixOS release from which the default
   # settings for stateful data, like file locations and database versions

m/common/monitoring.nix

@@ -0,0 +1,25 @@
+{ config, lib, ... }:
+
+{
+  # We need access to the devices to monitor the disk space
+  systemd.services.prometheus-node-exporter.serviceConfig.PrivateDevices = lib.mkForce false;
+  systemd.services.prometheus-node-exporter.serviceConfig.ProtectHome = lib.mkForce "read-only";
+
+  # Required to allow the smartctl exporter to read the nvme0 character device,
+  # see the commit message on:
+  # https://github.com/NixOS/nixpkgs/commit/12c26aca1fd55ab99f831bedc865a626eee39f80
+  services.udev.extraRules = ''
+    SUBSYSTEM=="nvme", KERNEL=="nvme[0-9]*", GROUP="disk"
+  '';
+
+  services.prometheus = {
+    exporters = {
+      node = {
+        enable = true;
+        enabledCollectors = [ "systemd" ];
+        port = 9002;
+      };
+      smartctl.enable = true;
+    };
+  };
+}

m/common/net.nix

@@ -6,25 +6,16 @@
   boot.kernelModules = [ "ib_umad" "ib_ipoib" ];
 
   networking = {
-    hostName = "xeon07";
-
     enableIPv6 = false;
     useDHCP = false;
-    #defaultGateway = "10.0.40.30";
+    defaultGateway = "10.0.40.30";
     nameservers = ["8.8.8.8"];
-    interfaces.eno1.ipv4.addresses = [ {
-      address = "10.0.40.7";
-      prefixLength = 24;
-    } ];
-
-    interfaces.ibp5s0.ipv4.addresses = [ {
-      address = "10.0.42.7";
-      prefixLength = 24;
-    } ];
-
     proxy = {
       default = "http://localhost:23080/";
-      noProxy = "127.0.0.1,localhost,internal.domain";
+      noProxy = "127.0.0.1,localhost,internal.domain,10.0.40.40";
+      # Don't set all_proxy as go complains and breaks the gitlab runner, see:
+      # https://github.com/golang/go/issues/16715
+      allProxy = null;
     };
 
     firewall = {
@@ -40,7 +31,7 @@
       84.88.53.236    ssfhead.bsc.es ssfhead
       
       # Node Entry for node: mds01 (ID=72)
-      10.0.40.40              mds01 mds01-eth0
+      10.0.40.40              bay mds01 mds01-eth0
       10.0.42.40              mds01-ib0
       10.0.40.141             mds01-ipmi0
       
@@ -50,17 +41,17 @@
       10.0.40.142             oss01-ipmi0
       
       # Node Entry for node: oss02 (ID=74)
-      10.0.40.42              oss02 oss02-eth0
+      10.0.40.42              lake2 oss02 oss02-eth0
       10.0.42.42              oss02-ib0
       10.0.40.143             oss02-ipmi0
       
       # Node Entry for node: xeon01 (ID=15)
-      10.0.40.1               xeon01 xeon01-eth0
+      10.0.40.1               owl1 xeon01 xeon01-eth0
       10.0.42.1               xeon01-ib0
       10.0.40.101             xeon01-ipmi0
       
       # Node Entry for node: xeon02 (ID=16)
-      10.0.40.2               xeon02 xeon02-eth0
+      10.0.40.2               owl2 xeon02 xeon02-eth0
       10.0.42.2               xeon02-ib0
       10.0.40.102             xeon02-ipmi0
       
@@ -75,7 +66,7 @@
       10.0.40.104             xeon04-ipmi0
       
       # Node Entry for node: xeon05 (ID=19)
-      10.0.40.5               xeon05 xeon05-eth0
+      10.0.40.5               koro xeon05 xeon05-eth0
       10.0.42.5               xeon05-ib0
       10.0.40.105             xeon05-ipmi0
       
@@ -85,12 +76,12 @@
       10.0.40.106             xeon06-ipmi0
       
       # Node Entry for node: xeon07 (ID=21)
-      10.0.40.7               xeon07 xeon07-eth0
+      10.0.40.7               hut xeon07 xeon07-eth0
       10.0.42.7               xeon07-ib0
       10.0.40.107             xeon07-ipmi0
       
       # Node Entry for node: xeon08 (ID=22)
-      10.0.40.8               xeon08 xeon08-eth0
+      10.0.40.8               eudy xeon08 xeon08-eth0
       10.0.42.8               xeon08-ib0
       10.0.40.108             xeon08-ipmi0
     '';

m/common/ntp.nix

@@ -0,0 +1,9 @@
+{ pkgs, ... }:
+
+{
+  services.ntp.enable = true;
+
+  # Use the NTP server at BSC, as we don't have direct access
+  # to the outside world
+  networking.timeServers = [ "84.88.52.36" ];
+}

m/common/slurm.nix

@@ -0,0 +1,42 @@
+{ lib, ... }:
+
+{
+  systemd.services.slurmd.serviceConfig = {
+    # Kill all processes in the control group on stop/restart. This will kill
+    # all the jobs running, so ensure that we only upgrade when the nodes are
+    # not in use. See:
+    # https://github.com/NixOS/nixpkgs/commit/ae93ed0f0d4e7be0a286d1fca86446318c0c6ffb
+    # https://bugs.schedmd.com/show_bug.cgi?id=2095#c24
+    KillMode = lib.mkForce "control-group";
+  };
+  services.slurm = {
+    client.enable = true;
+    controlMachine = "hut";
+    clusterName = "jungle";
+    nodeName = [
+      "owl[1,2]  Sockets=2 CoresPerSocket=14 ThreadsPerCore=2 Feature=owl"
+      "hut       Sockets=2 CoresPerSocket=14 ThreadsPerCore=2"
+    ];
+
+    # See slurm.conf(5) for more details about these options.
+    extraConfig = ''
+      # Use PMIx for MPI by default. It works okay with MPICH and OpenMPI, but
+      # not with Intel MPI. For that use the compatibility shim libpmi.so
+      # setting I_MPI_PMI_LIBRARY=$pmix/lib/libpmi.so while maintaining the PMIx
+      # library in SLURM (--mpi=pmix). See more details here:
+      # https://pm.bsc.es/gitlab/rarias/jungle/-/issues/16
+      MpiDefault=pmix
+
+      # When a node reboots return that node to the slurm queue as soon as it
+      # becomes operative again.
+      ReturnToService=2
+
+      # Track all processes by using a cgroup
+      ProctrackType=proctrack/cgroup
+
+      # Enable task/affinity to allow the jobs to run in a specified subset of
+      # the resources. Use the task/cgroup plugin to enable process containment.
+      TaskPlugin=task/affinity,task/cgroup
+    '';
+  };
+}

m/common/ssh.nix

@@ -11,19 +11,13 @@
       ProxyCommand nc -X connect -x localhost:23080 %h %p
   '';
 
-  # Authorize keys
-  users.users = {
-    root.openssh.authorizedKeys.keys = [
-      "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIKBOf4r4lzQfyO0bx5BaREePREw8Zw5+xYgZhXwOZoBO ram@hop"
-      "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAINa0tvnNgwkc5xOwd6xTtaIdFi5jv0j2FrE7jl5MTLoE ram@mio"
-    ];
-    rarias.openssh.authorizedKeys.keys = [
-      "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIKBOf4r4lzQfyO0bx5BaREePREw8Zw5+xYgZhXwOZoBO ram@hop"
-      "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAINa0tvnNgwkc5xOwd6xTtaIdFi5jv0j2FrE7jl5MTLoE ram@mio"
-    ];
-  };
-
   programs.ssh.knownHosts = {
+    "hut".publicKey = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAICO7jIp6JRnRWTMDsTB/aiaICJCl4x8qmKMPSs4lCqP1";
+    "owl1".publicKey = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIMqMEXO0ApVsBA6yjmb0xP2kWyoPDIWxBB0Q3+QbHVhv";
+    "owl2".publicKey = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIHurEYpQzNHqWYF6B9Pd7W8UPgF3BxEg0BvSbsA7BAdK";
+    "eudy".publicKey = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIL+WYPRRvZupqLAG0USKmd/juEPmisyyJaP8hAgYwXsG";
+    "koro".publicKey = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIImiTFDbxyUYPumvm8C4mEnHfuvtBY1H8undtd6oDd67";
+
     "gitlab-internal.bsc.es".publicKey = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIF9arsAOSRB06hdy71oTvJHG2Mg8zfebADxpvc37lZo3";
     "bscpm03.bsc.es".publicKey = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIM2NuSUPsEhqz1j5b4Gqd+MWFnRqyqY57+xMvBUqHYUS";
   };

m/common/users.nix

@@ -0,0 +1,62 @@
+{ ... }:
+
+{
+  users = {
+    mutableUsers = false;
+    users = {
+      # Generate hashedPassword with `mkpasswd -m sha-512`
+
+      root.openssh.authorizedKeys.keys = [
+        "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIKBOf4r4lzQfyO0bx5BaREePREw8Zw5+xYgZhXwOZoBO ram@hop"
+        "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAINa0tvnNgwkc5xOwd6xTtaIdFi5jv0j2FrE7jl5MTLoE ram@mio"
+        "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIF3zeB5KSimMBAjvzsp1GCkepVaquVZGPYwRIzyzaCba aleix@bsc"
+        "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIII/1TNArcwA6D47mgW4TArwlxQRpwmIGiZDysah40Gb root@hut"
+      ];
+
+      rarias = {
+        uid = 1880;
+        isNormalUser = true;
+        home = "/home/Computational/rarias";
+        description = "Rodrigo Arias";
+        group = "Computational";
+        extraGroups = [ "wheel" ];
+        hashedPassword = "$6$u06tkCy13enReBsb$xiI.twRvvTfH4jdS3s68NZ7U9PSbGKs5.LXU/UgoawSwNWhZo2hRAjNL5qG0/lAckzcho2LjD0r3NfVPvthY6/";
+        openssh.authorizedKeys.keys = [
+          "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIKBOf4r4lzQfyO0bx5BaREePREw8Zw5+xYgZhXwOZoBO ram@hop"
+          "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAINa0tvnNgwkc5xOwd6xTtaIdFi5jv0j2FrE7jl5MTLoE ram@mio"
+          "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIGYcXIxe0poOEGLpk8NjiRozls7fMRX0N3j3Ar94U+Gl rarias@hal"
+        ];
+      };
+
+      arocanon = {
+        uid = 1042;
+        isNormalUser = true;
+        home = "/home/Computational/arocanon";
+        description = "Aleix Roca";
+        group = "Computational";
+        extraGroups = [ "wheel" ];
+        hashedPassword = "$6$hliZiW4tULC/tH7p$pqZarwJkNZ7vS0G5llWQKx08UFG9DxDYgad7jplMD8WkZh5k58i4dfPoWtnEShfjTO6JHiIin05ny5lmSXzGM/";
+        openssh.authorizedKeys.keys = [
+          "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIF3zeB5KSimMBAjvzsp1GCkepVaquVZGPYwRIzyzaCba aleix@bsc"
+          "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIGdphWxLAEekicZ/WBrvP7phMyxKSSuLAZBovNX+hZXQ aleix@kerneland"
+        ];
+      };
+
+      rpenacob = {
+        uid = 2761;
+        isNormalUser = true;
+        home = "/home/Computational/rpenacob";
+        description = "Raúl Peñacoba";
+        group = "Computational";
+        hashedPassword = "$6$TZm3bDIFyPrMhj1E$uEDXoYYd1z2Wd5mMPfh3DZAjP7ztVjJ4ezIcn82C0ImqafPA.AnTmcVftHEzLB3tbe2O4SxDyPSDEQgJ4GOtj/";
+        openssh.authorizedKeys.keys = [
+          "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFYfXg37mauGeurqsLpedgA2XQ9d4Nm0ZGo/hI1f7wwH rpenacob@bsc"
+        ];
+      };
+    };
+
+    groups = {
+      Computational = { gid = 564; };
+    };
+  };
+}

m/common/watchdog.nix

@@ -0,0 +1,9 @@
+{ ... }:
+
+{
+  # The boards have a BMC watchdog controlled by IPMI
+  boot.kernelModules = [ "ipmi_watchdog" ];
+
+  # Enable systemd watchdog with 30 s interval
+  systemd.watchdog.runtimeTime = "30s";
+}

m/eudy/configuration.nix

@@ -0,0 +1,37 @@
+{ config, pkgs, lib, modulesPath, ... }:
+
+{
+  imports = [
+    ../common/main.nix
+    #(modulesPath + "/installer/netboot/netboot-minimal.nix")
+
+    ./kernel/kernel.nix
+    ./cpufreq.nix
+    ./fs.nix
+    ./users.nix
+    ./slurm.nix
+  ];
+
+  # Select this using the ID to avoid mismatches
+  boot.loader.grub.device = "/dev/disk/by-id/wwn-0x55cd2e414d53564b";
+
+  # disable automatic garbage collector
+  nix.gc.automatic = lib.mkForce false;
+
+  # members of the tracing group can use the lttng-provided kernel events
+  # without root permissions
+  users.groups.tracing.members = [ "arocanon" ];
+
+  # set up both ethernet and infiniband ips
+  networking = {
+    hostName = "eudy";
+    interfaces.eno1.ipv4.addresses = [ {
+      address = "10.0.40.8";
+      prefixLength = 24;
+    } ];
+    interfaces.ibp5s0.ipv4.addresses = [ {
+      address = "10.0.42.8";
+      prefixLength = 24;
+    } ];
+  };
+}

m/eudy/cpufreq.nix

@@ -0,0 +1,40 @@
+{ lib, ... }:
+
+{
+  # Disable frequency boost by default. Use the intel_pstate driver instead of
+  # acpi_cpufreq driver because the acpi_cpufreq driver does not read the
+  # complete range of P-States [1]. Use the intel_pstate passive mode [2] to
+  # disable HWP, which allows a core to "select P-states by itself". Also, this
+  # disables intel governors, which confusingly, have the same names as the
+  # generic ones but behave differently [3].
+
+  # Essentially, we use the generic governors, but use the intel driver to read
+  # the P-state list.
+
+  # [1] - https://www.kernel.org/doc/html/latest/admin-guide/pm/intel_pstate.html#intel-pstate-vs-acpi-cpufreq
+  # [2] - https://www.kernel.org/doc/html/latest/admin-guide/pm/intel_pstate.html#passive-mode
+  # [3] - https://www.kernel.org/doc/html/latest/admin-guide/pm/intel_pstate.html#active-mode
+  # https://www.kernel.org/doc/html/latest/admin-guide/pm/cpufreq.html
+
+  # set intel_pstate to passive mode
+  boot.kernelParams = [
+    "intel_pstate=passive"
+  ];
+  # Disable frequency boost
+  system.activationScripts = {
+    disableFrequencyBoost.text = ''
+      echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo
+    '';
+  };
+
+  ## disable intel_pstate
+  #boot.kernelParams = [
+  #  "intel_pstate=disable"
+  #];
+  ## Disable frequency boost
+  #system.activationScripts = {
+  #  disableFrequencyBoost.text = ''
+  #    echo 0 > /sys/devices/system/cpu/cpufreq/boost
+  #  '';
+  #};
+}

m/eudy/fs.nix

@@ -0,0 +1,13 @@
+{ ... }:
+
+{
+  fileSystems."/nix" = {
+    device = "/dev/disk/by-label/optane";
+    fsType = "ext4";
+    neededForBoot = true;
+  };
+  fileSystems."/mnt/data" = {
+    device = "/dev/disk/by-label/data";
+    fsType = "ext4";
+  };
+}

m/eudy/kernel/kernel.nix

@@ -0,0 +1,92 @@
+{ pkgs, lib, ... }:
+
+let
+  #fcs-devel = pkgs.linuxPackages_custom {
+  #   version = "6.2.8";
+  #   src = /mnt/data/kernel/fcs/kernel/src;
+  #   configfile = /mnt/data/kernel/fcs/kernel/configs/defconfig;
+  #};
+
+  #fcsv1 = fcs-kernel "bc11660676d3d68ce2459b9fb5d5e654e3f413be" false;
+  #fcsv2 = fcs-kernel "db0f2eca0cd57a58bf456d7d2c7d5d8fdb25dfb1" false;
+  #fcsv1-lockdep = fcs-kernel "bc11660676d3d68ce2459b9fb5d5e654e3f413be" true;
+  #fcsv2-lockdep = fcs-kernel "db0f2eca0cd57a58bf456d7d2c7d5d8fdb25dfb1" true;
+  #fcs-kernel = gitCommit: lockdep: pkgs.linuxPackages_custom {
+  #   version = "6.2.8";
+  #   src = builtins.fetchGit {
+  #     url = "git@bscpm03.bsc.es:ompss-kernel/linux.git";
+  #     rev = gitCommit;
+  #     ref = "fcs";
+  #   };
+  #   configfile = if lockdep then ./configs/lockdep else ./configs/defconfig;
+  #};
+
+  kernel = nixos-fcsv3;
+
+  nixos-fcs-kernel = {gitCommit, lockStat ? false, preempt ? false, branch ? "fcs"}: pkgs.linuxPackagesFor (pkgs.buildLinux rec {
+    version = "6.2.8";
+    src = builtins.fetchGit {
+      url = "git@bscpm03.bsc.es:ompss-kernel/linux.git";
+      rev = gitCommit;
+      ref = branch;
+    };
+    structuredExtraConfig = with lib.kernel; {
+      # add general custom kernel options here
+    } // lib.optionalAttrs lockStat {
+      LOCK_STAT = yes;
+    } // lib.optionalAttrs preempt {
+      PREEMPT = lib.mkForce yes;
+      PREEMPT_VOLUNTARY = lib.mkForce no;
+    };
+    kernelPatches = [];
+    extraMeta.branch = lib.versions.majorMinor version;
+  });
+
+  nixos-fcsv1 = nixos-fcs-kernel {gitCommit = "bc11660676d3d68ce2459b9fb5d5e654e3f413be";};
+  nixos-fcsv2 = nixos-fcs-kernel {gitCommit = "db0f2eca0cd57a58bf456d7d2c7d5d8fdb25dfb1";};
+  nixos-fcsv3 = nixos-fcs-kernel {gitCommit = "6c17394890704c3345ac1a521bb547164b36b154";};
+
+  # always use fcs_sched_setaffinity
+  #nixos-debug = nixos-fcs-kernel {gitCommit = "7d0bf285fca92badc8df3c9907a9ab30db4418aa";};
+  # remove need_check_cgroup
+  #nixos-debug = nixos-fcs-kernel {gitCommit = "4cc4efaab5e4a0bfa3089e935215b981c1922919";};
+  # merge again fcs_wake and fcs_wait
+  #nixos-debug = nixos-fcs-kernel {gitCommit = "40c6f72f4ae54b0b636b193ac0648fb5730c810d";};
+  # start from scratch, this is the working version with split fcs_wake and fcs_wait
+  nixos-debug = nixos-fcs-kernel {gitCommit = "c9a39d6a4ca83845b4e71fcc268fb0a76aff1bdf"; branch = "fcs-test"; };
+
+  nixos-fcsv1-lockstat = nixos-fcs-kernel {
+    gitCommit = "bc11660676d3d68ce2459b9fb5d5e654e3f413be";
+    lockStat = true;
+  };
+  nixos-fcsv2-lockstat = nixos-fcs-kernel {
+    gitCommit = "db0f2eca0cd57a58bf456d7d2c7d5d8fdb25dfb1";
+    lockStat = true;
+  };
+  nixos-fcsv3-lockstat = nixos-fcs-kernel {
+    gitCommit = "6c17394890704c3345ac1a521bb547164b36b154";
+    lockStat = true;
+  };
+  nixos-fcsv3-lockstat-preempt = nixos-fcs-kernel {
+    gitCommit = "6c17394890704c3345ac1a521bb547164b36b154";
+    lockStat = true;
+    preempt = true;
+  };
+  latest = pkgs.linuxPackages_latest;
+
+in {
+  imports = [
+    ./lttng.nix
+    ./perf.nix
+  ];
+  boot.kernelPackages = lib.mkForce kernel;
+
+  # disable all cpu mitigations
+  boot.kernelParams = [
+    "mitigations=off"
+  ];
+  
+  # enable memory overcommit, needed to build a taglibc system using nix after
+  # increasing the openblas memory footprint
+  boot.kernel.sysctl."vm.overcommit_memory" = 1;
+}

m/eudy/kernel/lttng.nix

@@ -0,0 +1,43 @@
+{ config, pkgs, lib, ... }:
+
+let
+
+  # The lttng btrfs probe crashes at compile time because of an undefined
+  # function. This disables the btrfs tracepoints to avoid the issue.
+
+  # Also enable lockdep tracepoints, this is disabled by default because it
+  # does not work well on architectures other than x86_64 (i think that arm) as
+  # I was told on the mailing list.
+  lttng-modules-fixed = config.boot.kernelPackages.lttng-modules.overrideAttrs (finalAttrs: previousAttrs: {
+    patchPhase = (lib.optionalString (previousAttrs ? patchPhase) previousAttrs.patchPhase) + ''
+      # disable btrfs
+      substituteInPlace src/probes/Kbuild \
+        --replace "  obj-\$(CONFIG_LTTNG) += lttng-probe-btrfs.o" "  #obj-\$(CONFIG_LTTNG) += lttng-probe-btrfs.o"
+
+      # enable lockdep tracepoints
+      substituteInPlace src/probes/Kbuild \
+        --replace "#ifneq (\$(CONFIG_LOCKDEP),)"                  "ifneq (\$(CONFIG_LOCKDEP),)" \
+        --replace "#  obj-\$(CONFIG_LTTNG) += lttng-probe-lock.o" "  obj-\$(CONFIG_LTTNG) += lttng-probe-lock.o" \
+        --replace "#endif # CONFIG_LOCKDEP"                       "endif # CONFIG_LOCKDEP"
+    '';
+  });
+in {
+
+  # add the lttng tools and modules to the system environment
+  boot.extraModulePackages = [ lttng-modules-fixed ];
+  environment.systemPackages = with pkgs; [
+    lttng-tools lttng-ust babeltrace
+  ];
+
+  # start the lttng root daemon to manage kernel events
+  systemd.services.lttng-sessiond = {
+    wantedBy = [ "multi-user.target" ];
+    description = "LTTng session daemon for the root user";
+    serviceConfig = {
+      User = "root";
+      ExecStart = ''
+        ${pkgs.lttng-tools}/bin/lttng-sessiond
+      '';
+    };
+  };
+}

m/eudy/kernel/perf.nix

@@ -0,0 +1,22 @@
+{ config, pkgs, lib, ... }:
+
+{
+  # add the perf tool
+  environment.systemPackages = with pkgs; [
+    config.boot.kernelPackages.perf
+  ];
+
+  # allow non-root users to read tracing data from the kernel
+  boot.kernel.sysctl."kernel.perf_event_paranoid" = -2;
+  boot.kernel.sysctl."kernel.kptr_restrict" = 0;
+
+  # specify additionl options to the tracefs directory to allow members of the
+  # tracing group to access tracefs.
+  fileSystems."/sys/kernel/tracing" = {
+    options = [
+      "mode=755"
+      "gid=tracing"
+    ];
+  };
+}
+

m/eudy/slurm.nix

@@ -0,0 +1,7 @@
+{ lib, ... }:
+
+{
+  services.slurm = {
+    client.enable = lib.mkForce false;
+  };
+}

m/eudy/users.nix

@@ -0,0 +1,11 @@
+{ ... }:
+
+{
+  security.sudo.extraRules= [{
+    users = [ "arocanon" ];
+    commands = [{
+      command = "ALL" ;
+      options= [ "NOPASSWD" ]; # "SETENV" # Adding the following could be a good idea
+    }];
+  }];
+}

m/hut/ceph.nix

@@ -0,0 +1,24 @@
+{ config, pkgs, ... }:
+
+{
+  environment.systemPackages = with pkgs; [
+    ceph
+    ceph-client
+    fio # For benchmarks
+  ];
+
+  # We need the ceph module loaded as the mount.ceph binary fails to run the
+  # modprobe command.
+  boot.kernelModules = [ "ceph" ];
+
+  age.secrets."secrets/ceph-user".file = ./secrets/ceph-user.age;
+
+  fileSystems."/ceph" = {
+    fsType = "ceph";
+    device = "user@9c8d06e0-485f-4aaf-b16b-06d6daf1232b.cephfs=/";
+    options = [
+      "mon_addr=10.0.42.40"
+      "secretfile=${config.age.secrets."secrets/ceph-user".path}"
+    ];
+  };
+}

m/hut/configuration.nix

@@ -0,0 +1,34 @@
+{ config, pkgs, agenix, ... }:
+
+{
+  imports = [
+    ../common/main.nix
+
+    ./gitlab-runner.nix
+    ./monitoring.nix
+    ./nfs.nix
+    ./slurm-daemon.nix
+    ./ceph.nix
+    #./pxe.nix
+    agenix.nixosModules.default
+  ];
+
+  environment.systemPackages = [
+    agenix.packages.x86_64-linux.default
+  ];
+
+  # Select the this using the ID to avoid mismatches
+  boot.loader.grub.device = "/dev/disk/by-id/ata-INTEL_SSDSC2BB240G7_PHDV6462004Y240AGN";
+
+  networking = {
+    hostName = "hut";
+    interfaces.eno1.ipv4.addresses = [ {
+      address = "10.0.40.7";
+      prefixLength = 24;
+    } ];
+    interfaces.ibp5s0.ipv4.addresses = [ {
+      address = "10.0.42.7";
+      prefixLength = 24;
+    } ];
+  };
+}

m/hut/gitlab-runner.nix

@@ -6,6 +6,7 @@
 
   services.gitlab-runner = {
     enable = true;
+    settings.concurrent = 5;
     services = {
       ovni-shell = {
         registrationConfigFile = config.age.secrets."secrets/ovni-token".path;
@@ -29,7 +30,10 @@
         registrationConfigFile = config.age.secrets."secrets/nosv-token".path;
         dockerImage = "debian:stable";
         tagList = [ "docker" "xeon" ];
-        registrationFlags = [ "--docker-network-mode host" ];
+        registrationFlags = [
+          "--docker-network-mode host"
+          "--docker-cpus 56"
+        ];
         environmentVariables = {
           https_proxy = "http://localhost:23080";
           http_proxy = "http://localhost:23080";

m/hut/ipmi.yml

@@ -0,0 +1,13 @@
+modules:
+        default:
+                collectors:
+                - bmc
+                - ipmi
+                - chassis
+
+        lan:
+                collectors:
+                - ipmi
+                - chassis
+                user: ""
+                pass: ""

m/hut/monitoring.nix

@@ -0,0 +1,137 @@
+{ config, lib, ... }:
+
+{
+  services.grafana = {
+    enable = true;
+    settings = {
+      server = {
+        domain = "jungle.bsc.es";
+        root_url = "%(protocol)s://%(domain)s/grafana";
+        serve_from_sub_path = true;
+        http_port = 2342;
+        http_addr = "127.0.0.1";
+      };
+      feature_toggles.publicDashboards = true;
+    };
+  };
+
+  services.prometheus = {
+    enable = true;
+    port = 9001;
+    retentionTime = "1y";
+  };
+
+  systemd.services.prometheus-ipmi-exporter.serviceConfig.DynamicUser = lib.mkForce false;
+  systemd.services.prometheus-ipmi-exporter.serviceConfig.PrivateDevices = lib.mkForce false;
+
+  # We need access to the devices to monitor the disk space
+  systemd.services.prometheus-node-exporter.serviceConfig.PrivateDevices = lib.mkForce false;
+  systemd.services.prometheus-node-exporter.serviceConfig.ProtectHome = lib.mkForce "read-only";
+
+  virtualisation.docker.daemon.settings = {
+    metrics-addr = "127.0.0.1:9323";
+  };
+
+  # Required to allow the smartctl exporter to read the nvme0 character device,
+  # see the commit message on:
+  # https://github.com/NixOS/nixpkgs/commit/12c26aca1fd55ab99f831bedc865a626eee39f80
+  services.udev.extraRules = ''
+    SUBSYSTEM=="nvme", KERNEL=="nvme[0-9]*", GROUP="disk"
+  '';
+
+  services.prometheus = {
+
+    exporters = {
+      ipmi = {
+        enable = true;
+        group = "root";
+        user = "root";
+        configFile = ./ipmi.yml;
+        #extraFlags = [ "--log.level=debug" ];
+      };
+      node = {
+        enable = true;
+        enabledCollectors = [ "systemd" ];
+        port = 9002;
+      };
+      smartctl.enable = true;
+    };
+
+    scrapeConfigs = [
+      {
+        job_name = "xeon07";
+        static_configs = [{
+          targets = [
+            "127.0.0.1:${toString config.services.prometheus.exporters.node.port}"
+            "127.0.0.1:${toString config.services.prometheus.exporters.ipmi.port}"
+            "127.0.0.1:9323"
+            "127.0.0.1:9252"
+            "127.0.0.1:${toString config.services.prometheus.exporters.smartctl.port}"
+          ];
+        }];
+      }
+      {
+        job_name = "ceph";
+        static_configs = [{
+          targets = [
+            "10.0.40.40:9283" # Ceph statistics
+            "10.0.40.40:9002" # Node exporter
+            "10.0.40.42:9002" # Node exporter
+          ];
+        }];
+      }
+      {
+        # Scrape the IPMI info of the hosts remotely via LAN
+        job_name = "ipmi-lan";
+        scrape_interval = "1m";
+        scrape_timeout = "30s";
+        metrics_path = "/ipmi";
+        scheme = "http";
+        relabel_configs = [
+          {
+            # Takes the address and sets it in the "target=<xyz>" URL parameter
+            source_labels = [ "__address__" ];
+            separator = ";";
+            regex = "(.*)(:80)?";
+            target_label = "__param_target";
+            replacement = "\${1}";
+            action = "replace";
+          }
+          {
+            # Sets the "instance" label with the remote host we are querying
+            source_labels = [ "__param_target" ];
+            separator = ";";
+            regex = "(.*)";
+            target_label = "instance";
+            replacement = "\${1}";
+            action = "replace";
+          }
+          {
+            # Sets the fixed "module=lan" URL param
+            separator = ";";
+            regex = "(.*)";
+            target_label = "__param_module";
+            replacement = "lan";
+            action = "replace";
+          }
+          {
+            # Sets the target to query as the localhost IPMI exporter
+            separator = ";";
+            regex = ".*";
+            target_label = "__address__";
+            replacement = "127.0.0.1:9290";
+            action = "replace";
+          }
+        ];
+
+        # Load the list of targets from another file
+        file_sd_configs = [
+          {
+            files = [ "${./targets.yml}" ];
+            refresh_interval = "30s";
+          }
+        ];
+      }
+    ];
+  };
+}

m/hut/pxe.nix

@@ -0,0 +1,35 @@
+{ theFlake, pkgs, ... }:
+
+# This module describes a script that can launch the pixiecore daemon to serve a
+# NixOS image via PXE to a node to directly boot from there, without requiring a
+# working disk.
+
+let
+  # The host config must have the netboot-minimal.nix module too
+  host = theFlake.nixosConfigurations.lake2;
+  sys = host.config.system;
+  build = sys.build;
+  kernel = "${build.kernel}/bzImage";
+  initrd = "${build.netbootRamdisk}/initrd";
+  init = "${build.toplevel}/init";
+
+  script = pkgs.writeShellScriptBin "pixiecore-helper" ''
+    #!/usr/bin/env bash -x
+
+    ${pkgs.pixiecore}/bin/pixiecore \
+      boot ${kernel} ${initrd} --cmdline "init=${init} loglevel=4" \
+      --debug --dhcp-no-bind --port 64172 --status-port 64172 "$@"
+  '';
+in
+{
+  ## We need a DHCP server to provide the IP
+  #services.dnsmasq = {
+  #  enable = true;
+  #  settings = {
+  #    domain-needed = true;
+  #    dhcp-range = [ "192.168.0.2,192.168.0.254" ];
+  #  };
+  #};
+
+  environment.systemPackages = [ script ];
+}

m/hut/secrets.nix

@@ -0,0 +1,11 @@
+let
+  rarias  = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIE1oZTPtlEXdGt0Ak+upeCIiBdaDQtcmuWoTUCVuSVIR rarias@hut";
+  root    = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIII/1TNArcwA6D47mgW4TArwlxQRpwmIGiZDysah40Gb";
+  hut     = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAICO7jIp6JRnRWTMDsTB/aiaICJCl4x8qmKMPSs4lCqP1";
+  default = [ rarias root hut ];
+in
+{
+  "secrets/ovni-token.age".publicKeys = default;
+  "secrets/nosv-token.age".publicKeys = default;
+  "secrets/ceph-user.age".publicKeys = default;
+}

m/hut/secrets/ceph-user.age

@@ -0,0 +1,11 @@
+age-encryption.org/v1
+-> ssh-ed25519 CAWG4Q 35Ak+Mep9k5KnDLF1ywDbMD4l4mRFg6D0et19tqXxAw
+Wgr+CX4rzrPmUszSidtLAVSvgD80F2dqtd92hGZIFwo
+-> ssh-ed25519 MSF3dg OVFvpkAyWTowtxsafstX31H/hJpNZmnOCbvqMIN0+AQ
+VxjRcQmp+BadEh2y0PB96EeizIl3tTQpVu0CWHmsc1s
+-> ssh-ed25519 HY2yRg MJSQIpre9m0XnojgXuKQ/+hVBZNrZNGZqplwhqicpjI
+CLkE52iqpoqSnbzisNjQgxTfNqKeaRl5ntcw1d+ZDyQ
+-> m$8`De%~-grease '85p}`by
+52zMpprONcawWDDtzHdWNwFoYXErPUnVjhSONbUBpDlqAmJmD1LcAnsU
+--- 0vZOPyXQIMMGTwgFfvm8Sn8O7vjrsjGUEy5m/BASCyc
+È| üœ)‡<>ËëË*_ËDóUS`<06><>‹àŠèr Âs<C382>¢NªÈ[ÖŒ^e+A1œ“G.í#âù°m˜¸Wß ’5·àƒµ( 

m/hut/slurm-daemon.nix

@@ -0,0 +1,11 @@
+{ ... }:
+
+{
+  services.slurm = {
+    server.enable = true;
+    partitionName = [
+      "owl Nodes=owl[1-2] Default=YES MaxTime=INFINITE State=UP"
+      "all Nodes=owl[1-2],hut Default=NO MaxTime=INFINITE State=UP"
+    ];
+  };
+}

m/hut/targets.yml

@@ -0,0 +1,11 @@
+- targets:
+  - 10.0.40.101
+  - 10.0.40.102
+  - 10.0.40.103
+  - 10.0.40.104
+  - 10.0.40.105
+  - 10.0.40.106
+  - 10.0.40.107
+  - 10.0.40.108
+  labels:
+    job: ipmi-lan

m/koro/configuration.nix

@@ -0,0 +1,37 @@
+{ config, pkgs, lib, modulesPath, ... }:
+
+{
+  imports = [
+    ../common/main.nix
+    #(modulesPath + "/installer/netboot/netboot-minimal.nix")
+
+    ../eudy/cpufreq.nix
+    ../eudy/users.nix
+    ../eudy/slurm.nix
+    ./users.nix
+    ./kernel.nix
+  ];
+
+  # Select this using the ID to avoid mismatches
+  boot.loader.grub.device = "/dev/disk/by-id/wwn-0x55cd2e414d5376d2";
+
+  # disable automatic garbage collector
+  nix.gc.automatic = lib.mkForce false;
+
+  # members of the tracing group can use the lttng-provided kernel events
+  # without root permissions
+  users.groups.tracing.members = [ "arocanon" "vlopez" ];
+
+  # set up both ethernet and infiniband ips
+  networking = {
+    hostName = "koro";
+    interfaces.eno1.ipv4.addresses = [ {
+      address = "10.0.40.5";
+      prefixLength = 24;
+    } ];
+    interfaces.ibp5s0.ipv4.addresses = [ {
+      address = "10.0.42.5";
+      prefixLength = 24;
+    } ];
+  };
+}

m/koro/kernel.nix

@@ -0,0 +1,64 @@
+{ pkgs, lib, ... }:
+
+let
+  kernel = nixos-fcsv4;
+
+  nixos-fcs-kernel = {gitCommit, lockStat ? false, preempt ? false, branch ? "fcs"}: pkgs.linuxPackagesFor (pkgs.buildLinux rec {
+    version = "6.2.8";
+    src = builtins.fetchGit {
+      url = "git@bscpm03.bsc.es:ompss-kernel/linux.git";
+      rev = gitCommit;
+      ref = branch;
+    };
+    structuredExtraConfig = with lib.kernel; {
+      # add general custom kernel options here
+    } // lib.optionalAttrs lockStat {
+      LOCK_STAT = yes;
+    } // lib.optionalAttrs preempt {
+      PREEMPT = lib.mkForce yes;
+      PREEMPT_VOLUNTARY = lib.mkForce no;
+    };
+    kernelPatches = [];
+    extraMeta.branch = lib.versions.majorMinor version;
+  });
+
+  nixos-fcsv1 = nixos-fcs-kernel {gitCommit = "bc11660676d3d68ce2459b9fb5d5e654e3f413be";};
+  nixos-fcsv2 = nixos-fcs-kernel {gitCommit = "db0f2eca0cd57a58bf456d7d2c7d5d8fdb25dfb1";};
+  nixos-fcsv3 = nixos-fcs-kernel {gitCommit = "6c17394890704c3345ac1a521bb547164b36b154";};
+  nixos-fcsv4 = nixos-fcs-kernel {gitCommit = "c94c3d946f33ac3e5782a02ee002cc1164c0cb4f";};
+
+  nixos-fcsv1-lockstat = nixos-fcs-kernel {
+    gitCommit = "bc11660676d3d68ce2459b9fb5d5e654e3f413be";
+    lockStat = true;
+  };
+  nixos-fcsv2-lockstat = nixos-fcs-kernel {
+    gitCommit = "db0f2eca0cd57a58bf456d7d2c7d5d8fdb25dfb1";
+    lockStat = true;
+  };
+  nixos-fcsv3-lockstat = nixos-fcs-kernel {
+    gitCommit = "6c17394890704c3345ac1a521bb547164b36b154";
+    lockStat = true;
+  };
+  nixos-fcsv3-lockstat-preempt = nixos-fcs-kernel {
+    gitCommit = "6c17394890704c3345ac1a521bb547164b36b154";
+    lockStat = true;
+    preempt = true;
+  };
+  latest = pkgs.linuxPackages_latest;
+
+in {
+  imports = [
+    ../eudy/kernel/lttng.nix
+    ../eudy/kernel/perf.nix
+  ];
+  boot.kernelPackages = lib.mkForce kernel;
+
+  # disable all cpu mitigations
+  boot.kernelParams = [
+    "mitigations=off"
+  ];
+  
+  # enable memory overcommit, needed to build a taglibc system using nix after
+  # increasing the openblas memory footprint
+  boot.kernel.sysctl."vm.overcommit_memory" = lib.mkForce 1;
+}

m/koro/users.nix

@@ -0,0 +1,17 @@
+{ ... }:
+
+{
+  users.users = {
+    vlopez = {
+      uid = 4334;
+      isNormalUser = true;
+      home = "/home/Computational/vlopez";
+      description = "Victor López";
+      group = "Computational";
+      hashedPassword = "$6$0ZBkgIYE/renVqtt$1uWlJsb0FEezRVNoETTzZMx4X2SvWiOsKvi0ppWCRqI66S6TqMBXBdP4fcQyvRRBt0e4Z7opZIvvITBsEtO0f0";
+      openssh.authorizedKeys.keys = [
+        "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIGMwlUZRf9jfG666Qa5Sb+KtEhXqkiMlBV2su3x/dXHq victor@arch"
+      ];
+    };
+  };
+}

m/lake2/configuration.nix

@@ -0,0 +1,74 @@
+{ config, pkgs, lib, modulesPath, ... }:
+
+{
+  imports = [
+    ../common/main.nix
+    ../common/monitoring.nix
+  ];
+
+  boot.loader.grub.device = "/dev/disk/by-id/wwn-0x55cd2e414d53563a";
+
+  environment.systemPackages = with pkgs; [
+    ceph
+  ];
+
+  services.slurm = {
+    client.enable = lib.mkForce false;
+  };
+
+  services.ceph = {
+    enable = true;
+    global = {
+      fsid = "9c8d06e0-485f-4aaf-b16b-06d6daf1232b";
+      monHost = "10.0.42.40";
+      monInitialMembers = "10.0.42.40";
+      publicNetwork = "10.0.42.40/24";
+      clusterNetwork = "10.0.42.40/24";
+    };
+    osd = {
+      enable = true;
+      # One daemon per NVME disk
+      daemons = [ "4" "5" "6" "7" ];
+      extraConfig = {
+        "osd crush chooseleaf type" = "0";
+        "osd journal size" = "10000";
+        "osd pool default min size" = "2";
+        "osd pool default pg num" = "200";
+        "osd pool default pgp num" = "200";
+        "osd pool default size" = "3";
+      };
+    };
+  };
+
+  networking = {
+    hostName = "lake2";
+    interfaces.eno1.ipv4.addresses = [ {
+      address = "10.0.40.42";
+      prefixLength = 24;
+    } ];
+    interfaces.ibp5s0.ipv4.addresses = [ {
+      address = "10.0.42.42";
+      prefixLength = 24;
+    } ];
+  };
+
+  # Missing service for volumes, see:
+  # https://www.reddit.com/r/ceph/comments/14otjyo/comment/jrd69vt/
+  systemd.services.ceph-volume = {
+    enable = true;
+    description = "Ceph Volume activation";
+    unitConfig = {
+      Type = "oneshot";
+      After = "local-fs.target";
+      Wants = "local-fs.target";
+    };
+    path = [ pkgs.ceph pkgs.util-linux pkgs.lvm2 pkgs.cryptsetup ];
+    serviceConfig = {
+      KillMode = "none";
+      Environment = "CEPH_VOLUME_TIMEOUT=10000";
+      ExecStart = "/bin/sh -c 'timeout $CEPH_VOLUME_TIMEOUT ${pkgs.ceph}/bin/ceph-volume lvm activate --all --no-systemd'";
+      TimeoutSec = "0";
+    };
+    wantedBy = [ "multi-user.target" ];
+  };
+}

m/owl1/configuration.nix

@@ -0,0 +1,20 @@
+{ config, pkgs, ... }:
+
+{
+  imports = [ ../common/main.nix ];
+
+  # Select the this using the ID to avoid mismatches
+  boot.loader.grub.device = "/dev/disk/by-id/wwn-0x55cd2e414d53566c";
+
+  networking = {
+    hostName = "owl1";
+    interfaces.eno1.ipv4.addresses = [ {
+      address = "10.0.40.1";
+      prefixLength = 24;
+    } ];
+    interfaces.ibp5s0.ipv4.addresses = [ {
+      address = "10.0.42.1";
+      prefixLength = 24;
+    } ];
+  };
+}

m/owl2/configuration.nix

@@ -0,0 +1,25 @@
+{ config, pkgs, modulesPath, lib, ... }:
+
+{
+  imports = [
+    #(modulesPath + "/installer/netboot/netboot-minimal.nix")
+    ../common/main.nix
+  ];
+
+  # Select the this using the ID to avoid mismatches
+  boot.loader.grub.device = "/dev/disk/by-id/wwn-0x55cd2e414d535629";
+  #programs.ssh.forwardX11 = false;
+  #programs.ssh.setXAuthLocation = lib.mkForce true;
+
+  networking = {
+    hostName = "owl2";
+    interfaces.eno1.ipv4.addresses = [ {
+      address = "10.0.40.2";
+      prefixLength = 24;
+    } ];
+    interfaces.ibp129s0.ipv4.addresses = [ {
+      address = "10.0.42.2";
+      prefixLength = 24;
+    } ];
+  };
+}

nixos-config.nix

@@ -0,0 +1 @@
+(builtins.getFlake (toString ./.)).nixosConfigurations

overlays-compat/overlays.nix

@@ -1,8 +0,0 @@
-self: super:
-with super.lib;
-let
-  # Load the system config and get the `nixpkgs.overlays` option
-  overlays = (import <nixpkgs/nixos> { }).config.nixpkgs.overlays;
-in
-  # Apply all overlays to the input of the current "main" overlay
-  foldl' (flip extends) (_: super) overlays self

pkgs/ceph.nix

@@ -0,0 +1,405 @@
+{ lib
+, stdenv
+, runCommand
+, fetchurl
+, fetchFromGitHub
+, fetchPypi
+
+# Build time
+, cmake
+, ensureNewerSourcesHook
+, fmt
+, git
+, makeWrapper
+, nasm
+, pkg-config
+, which
+
+# Tests
+, nixosTests
+
+# Runtime dependencies
+, arrow-cpp
+, babeltrace
+, boost179
+, bzip2
+, cryptsetup
+, cunit
+, doxygen
+, gperf
+, graphviz
+, gtest
+, icu
+, libcap
+, libcap_ng
+, libnl
+, libxml2
+, lttng-ust
+, lua
+, lz4
+, oath-toolkit
+, openldap
+, python310
+, rdkafka
+, rocksdb
+, snappy
+, sqlite
+, utf8proc
+, zlib
+, zstd
+
+# Optional Dependencies
+, curl ? null
+, expat ? null
+, fuse ? null
+, libatomic_ops ? null
+, libedit ? null
+, libs3 ? null
+, yasm ? null
+
+# Mallocs
+, gperftools ? null
+, jemalloc ? null
+
+# Crypto Dependencies
+, cryptopp ? null
+, nspr ? null
+, nss ? null
+
+# Linux Only Dependencies
+, linuxHeaders
+, util-linux
+, libuuid
+, udev
+, keyutils
+, rdma-core
+, rabbitmq-c
+, libaio ? null
+, libxfs ? null
+, liburing ? null
+, zfs ? null
+, ...
+}:
+
+# We must have one crypto library
+assert cryptopp != null || (nss != null && nspr != null);
+
+let
+  shouldUsePkg = pkg: if pkg != null && pkg.meta.available then pkg else null;
+
+  optYasm = shouldUsePkg yasm;
+  optExpat = shouldUsePkg expat;
+  optCurl = shouldUsePkg curl;
+  optFuse = shouldUsePkg fuse;
+  optLibedit = shouldUsePkg libedit;
+  optLibatomic_ops = shouldUsePkg libatomic_ops;
+  optLibs3 = shouldUsePkg libs3;
+
+  optJemalloc = shouldUsePkg jemalloc;
+  optGperftools = shouldUsePkg gperftools;
+
+  optCryptopp = shouldUsePkg cryptopp;
+  optNss = shouldUsePkg nss;
+  optNspr = shouldUsePkg nspr;
+
+  optLibaio = shouldUsePkg libaio;
+  optLibxfs = shouldUsePkg libxfs;
+  optZfs = shouldUsePkg zfs;
+
+  # Downgrade rocksdb, 7.10 breaks ceph
+  rocksdb' = rocksdb.overrideAttrs {
+    version = "7.9.2";
+    src = fetchFromGitHub {
+      owner = "facebook";
+      repo = "rocksdb";
+      rev = "refs/tags/v7.9.2";
+      hash = "sha256-5P7IqJ14EZzDkbjaBvbix04ceGGdlWBuVFH/5dpD5VM=";
+    };
+  };
+
+  hasRadosgw = optExpat != null && optCurl != null && optLibedit != null;
+
+  # Malloc implementation (can be jemalloc, tcmalloc or null)
+  malloc = if optJemalloc != null then optJemalloc else optGperftools;
+
+  # We prefer nss over cryptopp
+  cryptoStr = if optNss != null && optNspr != null then "nss" else
+    if optCryptopp != null then "cryptopp" else "none";
+
+  cryptoLibsMap = {
+    nss = [ optNss optNspr ];
+    cryptopp = [ optCryptopp ];
+    none = [ ];
+  };
+
+  getMeta = description: with lib; {
+     homepage = "https://ceph.io/en/";
+     inherit description;
+     license = with licenses; [ lgpl21 gpl2 bsd3 mit publicDomain ];
+     maintainers = with maintainers; [ adev ak johanot krav ];
+     platforms = [ "x86_64-linux" "aarch64-linux" ];
+   };
+
+  ceph-common = with python.pkgs; buildPythonPackage {
+    pname = "ceph-common";
+    inherit src version;
+
+    sourceRoot = "ceph-${version}/src/python-common";
+
+    propagatedBuildInputs = [
+      pyyaml
+    ];
+
+    nativeCheckInputs = [
+      pytestCheckHook
+    ];
+
+    disabledTests = [
+      # requires network access
+      "test_valid_addr"
+    ];
+
+    meta = getMeta "Ceph common module for code shared by manager modules";
+  };
+
+  # Watch out for python <> boost compatibility
+  python = python310.override {
+    packageOverrides = self: super: {
+      sqlalchemy = super.sqlalchemy.overridePythonAttrs rec {
+        version = "1.4.46";
+        src = fetchPypi {
+          pname = "SQLAlchemy";
+          inherit version;
+          hash = "sha256-aRO4JH2KKS74MVFipRkx4rQM6RaB8bbxj2lwRSAMSjA=";
+        };
+        disabledTestPaths = [
+          "test/aaa_profiling"
+          "test/ext/mypy"
+        ];
+      };
+    };
+  };
+
+  boost = boost179.override {
+    enablePython = true;
+    inherit python;
+  };
+
+  # TODO: split this off in build and runtime environment
+  ceph-python-env = python.withPackages (ps: with ps; [
+    ceph-common
+
+    # build time
+    cython
+
+    # debian/control
+    bcrypt
+    cherrypy
+    influxdb
+    jinja2
+    kubernetes
+    natsort
+    numpy
+    pecan
+    prettytable
+    pyjwt
+    pyopenssl
+    python-dateutil
+    pyyaml
+    requests
+    routes
+    scikit-learn
+    scipy
+    setuptools
+    sphinx
+    virtualenv
+    werkzeug
+
+    # src/pybind/mgr/requirements-required.txt
+    cryptography
+    jsonpatch
+
+    # src/tools/cephfs/shell/setup.py
+    cmd2
+    colorama
+  ]);
+  inherit (ceph-python-env.python) sitePackages;
+
+  version = "18.2.0";
+  src = fetchurl {
+    url = "https://download.ceph.com/tarballs/ceph-${version}.tar.gz";
+    hash = "sha256:0k9nl6xi5brva51rr14m7ig27mmmd7vrpchcmqc40q3c2khn6ns9";
+  };
+in rec {
+  ceph = stdenv.mkDerivation {
+    pname = "ceph";
+    inherit src version;
+
+    nativeBuildInputs = [
+      cmake
+      fmt
+      git
+      makeWrapper
+      nasm
+      pkg-config
+      python
+      python.pkgs.python # for the toPythonPath function
+      python.pkgs.wrapPython
+      which
+      (ensureNewerSourcesHook { year = "1980"; })
+      # for building docs/man-pages presumably
+      doxygen
+      graphviz
+    ];
+
+    enableParallelBuilding = true;
+
+    buildInputs = cryptoLibsMap.${cryptoStr} ++ [
+      arrow-cpp
+      babeltrace
+      boost
+      bzip2
+      ceph-python-env
+      cryptsetup
+      cunit
+      gperf
+      gtest
+      icu
+      libcap
+      libnl
+      libxml2
+      lttng-ust
+      lua
+      lz4
+      malloc
+      oath-toolkit
+      openldap
+      optLibatomic_ops
+      optLibs3
+      optYasm
+      rdkafka
+      rocksdb'
+      snappy
+      sqlite
+      utf8proc
+      zlib
+      zstd
+    ] ++ lib.optionals stdenv.isLinux [
+      keyutils
+      libcap_ng
+      liburing
+      libuuid
+      linuxHeaders
+      optLibaio
+      optLibxfs
+      optZfs
+      rabbitmq-c
+      rdma-core
+      udev
+      util-linux
+    ] ++ lib.optionals hasRadosgw [
+      optCurl
+      optExpat
+      optFuse
+      optLibedit
+    ];
+
+    pythonPath = [ ceph-python-env "${placeholder "out"}/${ceph-python-env.sitePackages}" ];
+
+    preConfigure =''
+      substituteInPlace src/common/module.c --replace "/sbin/modinfo"  "modinfo"
+      substituteInPlace src/common/module.c --replace "/sbin/modprobe" "modprobe"
+      substituteInPlace src/common/module.c --replace "/bin/grep" "grep"
+
+      # install target needs to be in PYTHONPATH for "*.pth support" check to succeed
+      # set PYTHONPATH, so the build system doesn't silently skip installing ceph-volume and others
+      export PYTHONPATH=${ceph-python-env}/${sitePackages}:$lib/${sitePackages}:$out/${sitePackages}
+      patchShebangs src/
+    '';
+
+    cmakeFlags = [
+      "-DCMAKE_INSTALL_DATADIR=${placeholder "lib"}/lib"
+
+      "-DWITH_CEPHFS_SHELL:BOOL=ON"
+      "-DWITH_SYSTEMD:BOOL=OFF"
+      # `WITH_JAEGER` requires `thrift` as a depenedncy (fine), but the build fails with:
+      #     CMake Error at src/opentelemetry-cpp-stamp/opentelemetry-cpp-build-Release.cmake:49 (message):
+      #     Command failed: 2
+      #
+      #        'make' 'opentelemetry_trace' 'opentelemetry_exporter_jaeger_trace'
+      #
+      #     See also
+      #
+      #        /build/ceph-18.2.0/build/src/opentelemetry-cpp/src/opentelemetry-cpp-stamp/opentelemetry-cpp-build-*.log
+      # and that file contains:
+      #     /build/ceph-18.2.0/src/jaegertracing/opentelemetry-cpp/exporters/jaeger/src/TUDPTransport.cc: In member function 'virtual void opentelemetry::v1::exporter::jaeger::TUDPTransport::close()':
+      #     /build/ceph-18.2.0/src/jaegertracing/opentelemetry-cpp/exporters/jaeger/src/TUDPTransport.cc:71:7: error: '::close' has not been declared; did you mean 'pclose'?
+      #       71 |     ::THRIFT_CLOSESOCKET(socket_);
+      #          |       ^~~~~~~~~~~~~~~~~~
+      # Looks like `close()` is somehow not included.
+      # But the relevant code is already removed in `open-telemetry` 1.10: https://github.com/open-telemetry/opentelemetry-cpp/pull/2031
+      # So it's proably not worth trying to fix that for this Ceph version,
+      # and instead just disable Ceph's Jaeger support.
+      "-DWITH_JAEGER:BOOL=OFF"
+      "-DWITH_TESTS:BOOL=OFF"
+
+      # Use our own libraries, where possible
+      "-DWITH_SYSTEM_ARROW:BOOL=ON" # Only used if other options enable Arrow support.
+      "-DWITH_SYSTEM_BOOST:BOOL=ON"
+      "-DWITH_SYSTEM_GTEST:BOOL=ON"
+      "-DWITH_SYSTEM_ROCKSDB:BOOL=ON"
+      "-DWITH_SYSTEM_UTF8PROC:BOOL=ON"
+      "-DWITH_SYSTEM_ZSTD:BOOL=ON"
+
+      # TODO breaks with sandbox, tries to download stuff with npm
+      "-DWITH_MGR_DASHBOARD_FRONTEND:BOOL=OFF"
+      # WITH_XFS has been set default ON from Ceph 16, keeping it optional in nixpkgs for now
+      ''-DWITH_XFS=${if optLibxfs != null then "ON" else "OFF"}''
+    ] ++ lib.optional stdenv.isLinux "-DWITH_SYSTEM_LIBURING=ON";
+
+    postFixup = ''
+      wrapPythonPrograms
+      wrapProgram $out/bin/ceph-mgr --prefix PYTHONPATH ":" "$(toPythonPath ${placeholder "out"}):$(toPythonPath ${ceph-python-env})"
+
+      # Test that ceph-volume exists since the build system has a tendency to
+      # silently drop it with misconfigurations.
+      test -f $out/bin/ceph-volume
+    '';
+
+    outputs = [ "out" "lib" "dev" "doc" "man" ];
+
+    doCheck = false; # uses pip to install things from the internet
+
+    # Takes 7+h to build with 2 cores.
+    requiredSystemFeatures = [ "big-parallel" ];
+
+    meta = getMeta "Distributed storage system";
+
+    passthru = {
+      inherit version;
+      tests = {
+        inherit (nixosTests)
+          ceph-multi-node
+          ceph-single-node
+          ceph-single-node-bluestore;
+      };
+    };
+  };
+
+  ceph-client = runCommand "ceph-client-${version}" {
+      meta = getMeta "Tools needed to mount Ceph's RADOS Block Devices/Cephfs";
+    } ''
+      mkdir -p $out/{bin,etc,${sitePackages},share/bash-completion/completions}
+      cp -r ${ceph}/bin/{ceph,.ceph-wrapped,rados,rbd,rbdmap} $out/bin
+      cp -r ${ceph}/bin/ceph-{authtool,conf,dencoder,rbdnamer,syn} $out/bin
+      cp -r ${ceph}/bin/rbd-replay* $out/bin
+      cp -r ${ceph}/sbin/mount.ceph $out/bin
+      cp -r ${ceph}/sbin/mount.fuse.ceph $out/bin
+      ln -s bin $out/sbin
+      cp -r ${ceph}/${sitePackages}/* $out/${sitePackages}
+      cp -r ${ceph}/etc/bash_completion.d $out/share/bash-completion/completions
+      # wrapPythonPrograms modifies .ceph-wrapped, so lets just update its paths
+      substituteInPlace $out/bin/ceph          --replace ${ceph} $out
+      substituteInPlace $out/bin/.ceph-wrapped --replace ${ceph} $out
+   '';
+}

pkgs/overlay.nix

@@ -0,0 +1,35 @@
+final: prev:
+{
+  bsc = prev.bsc.extend (bscFinal: bscPrev: {
+    # Set MPICH as default
+    mpi = bscFinal.mpich;
+
+    # Configure the network for MPICH
+    mpich = with final; prev.mpich.overrideAttrs (old: {
+      buildInput = old.buildInputs ++ [
+        libfabric
+        pmix
+      ];
+      configureFlags = [
+        "--enable-shared"
+        "--enable-sharedlib"
+        "--with-pm=no"
+        "--with-device=ch4:ofi"
+        "--with-pmi=pmix"
+        "--with-pmix=${final.pmix}"
+        "--with-libfabric=${final.libfabric}"
+        "--enable-g=log"
+      ] ++ lib.optionals (lib.versionAtLeast gfortran.version "10") [
+        "FFLAGS=-fallow-argument-mismatch" # https://github.com/pmodels/mpich/issues/4300
+        "FCFLAGS=-fallow-argument-mismatch"
+      ];
+    });
+  });
+
+  # Update ceph to 18.2.0 until it lands in nixpkgs, see:
+  # https://github.com/NixOS/nixpkgs/pull/247849
+  inherit (prev.callPackage ./ceph.nix {
+    lua = prev.lua5_4;
+    fmt = prev.fmt_8;
+  }) ceph ceph-client;
+}

rebuild.sh

@@ -0,0 +1,16 @@
+#!/bin/sh -ex
+
+if [ "$(id -u)" != 0 ]; then
+ echo "Needs root permissions"
+ exit 1
+fi
+
+if [ "$(hostname)" != "hut" ]; then
+  >&2 echo "must run from machine hut, not $(hostname)"
+  exit 1
+fi
+
+# Update all nodes
+nixos-rebuild switch --flake .
+nixos-rebuild switch --flake .#owl1 --target-host owl1
+nixos-rebuild switch --flake .#owl2 --target-host owl2

web/.gitignore

@@ -0,0 +1 @@
+./public

web/archetypes/default.md

@@ -0,0 +1,6 @@
+---
+title: "{{ replace .Name "-" " " | title }}"
+date: {{ .Date }}
+draft: true
+---
+

web/content/_index.md

@@ -0,0 +1,25 @@
+![Rainforest](jungle.jpg)
+
+Welcome to the jungle, a set of machines with no imposed rules that are fully
+controlled and maintained by their users.
+
+The configuration of all the machines is written in a centralized [git
+repository][config] using the Nix language for NixOS. Changes in the
+configuration of the machines are introduced by merge requests and pass a review
+step before being deployed.
+
+[config]: https://pm.bsc.es/gitlab/rarias/jungle
+
+The machines have access to the large list of packages available in
+[Nixpkgs][nixpkgs] and a custom set of packages named [bscpkgs][bscpkgs],
+specifically tailored to our needs for HPC machines. Users can install their own
+packages and made them system-wide available by opening a merge request.
+
+[nixpkgs]: https://github.com/NixOS/nixpkgs
+[bscpkgs]: https://pm.bsc.es/gitlab/rarias/bscpkgs
+
+We have put a lot of effort to guarantee very good reproducibility properties in
+the configuration of the machines and the software they use.
+
+To enter the jungle machines follow the [instructions](access) to submit a
+request.

web/content/access/index.md

@@ -0,0 +1,22 @@
+---
+title: "Enter the jungle"
+description: "Request access to the machines"
+---
+
+![Cave](./cave.jpg)
+
+Before requesting access to the jungle machines, you must be able to access the
+`ssfhead.bsc.es` node (only available via the intranet or VPN). You can request
+access to the login machine using a resource petition in the BSC intranet.
+
+Then, to request access to the machines we will need some information about you:
+
+1. Which machines you want access to (hut, owl1, owl2, eudy, koro...)
+1. Your user name and user id (to match the NFS permissions)
+1. Your real name and surname (for identification purposes)
+1. The salted hash of your login password, generated with `mkpasswd -m sha-512`
+1. An SSH public key of type Ed25519 (can be generated with `ssh-keygen -t ed25519`)
+
+You can send us both an email at <rodrigo.arias@bsc.es> and
+<aleix.rocanonell@bsc.es> with the details, or directly open a merge request in
+the [jungle repository](https://pm.bsc.es/gitlab/rarias/jungle/).

web/content/eudy/_index.md

@@ -0,0 +1,10 @@
+---
+title: "Eudy"
+description: "Linux kernel experiments"
+---
+
+[![Eudy](eudy.jpg)](https://commons.wikimedia.org/w/index.php?curid=5817408)
+
+The *eudy* machine is destined as a playground for Linux kernel experiments. The
+name is a shorthand of the Eudyptula species of little penguins found the New
+Zealand and Australia.

web/content/grafana/_index.md

@@ -0,0 +1,6 @@
+---
+title: "Grafana"
+description: "Monitor metrics"
+---
+
+If you are reading this page, the proxy to the Grafana service is not working.

web/content/hut/_index.md

@@ -0,0 +1,18 @@
+---
+title: "Hut"
+description: "Control node"
+date: 2023-06-13T19:36:57+02:00
+---
+
+![Hut](hut.jpg)
+
+From the hut we monitor and control other nodes. It consist of one node only,
+which is available at `hut` or `xeon07`. It runs the following services:
+
+- Prometheus: to store the monitoring data.
+- Grafana: to plot the data in the web browser.
+- Slurmctld: to manage the SLURM nodes.
+- Gitlab runner: to run CI jobs from Gitlab.
+
+This node is prone to interruptions from all the services it runs, so it is not
+a good candidate for low noise executions.

web/content/lake/_index.md

@@ -0,0 +1,10 @@
+---
+title: "Lake"
+description: "Data storage"
+date: 2023-06-13T19:36:57+02:00
+draft: true
+---
+
+![Lake](lake.jpg)
+
+Data storage

web/content/owl/_index.md

@@ -0,0 +1,10 @@
+---
+title: "Owl"
+description: "Low system noise"
+---
+
+![Owl](owl.jpg)
+
+Much like the silent flight of an owl at night, these nodes are configured to
+minimize the system noise and let programs run undisturbed. The list of nodes is
+`owl[1-2]` and are available for jobs with SLURM.

web/hugo.toml

@@ -0,0 +1,5 @@
+baseURL = 'https://jungle.bsc.es/'
+languageCode = 'en-us'
+title = 'The jungle'
+theme = 'PaperMod'
+sectionPagesMenu = "main"

web/themes/PaperMod/.github/ISSUE_TEMPLATE/bug_report.md

@@ -0,0 +1,50 @@
+---
+name: Bug report
+about: Create a report to help us improve
+title: "[BUG]"
+labels: bug
+assignees: ''
+
+---
+
+<!--
+
+## READ BEFORE OPENING ISSUES
+
+Please fill the template below
+- **DO NOT** ask for instructions.
+- Use Discussions section if you need help
+- See project wiki https://github.com/adityatelange/hugo-PaperMod/wiki
+- Read FAQs section https://github.com/adityatelange/hugo-PaperMod/wiki/FAQs
+- Search for previous issues/ pull requests
+
+-->
+
+**Describe the bug**
+<!-- A clear and concise description of what the bug is. -->
+
+ - Device/Os: [e.g. Android 10]
+ - Type: [e.g. Desktop/Mobile]
+ - Browser and version [e.g. Chrome 86.0]:
+ - Hugo Version [ >=0.97.1 expected]:
+ - Theme Version [e.g. v4.0, master, or commit-id ]:
+
+**Steps to reproduce the behavior:**
+<!--
+1. Go to '...'
+2. Click on '....'
+3. Scroll down to '....'
+4. See error
+-->
+
+**Expected behavior**:
+<!-- A clear and concise description of what you expected to happen. -->
+
+**Repo/Source where this issue can be reproduced**:
+<!-- Please link source code of website where the said issue can be reproduced -->
+
+**Screenshots**
+<!-- If applicable, add screenshots to help explain your problem. -->
+
+**Additional context**
+<!--Add any other context about the problem here. -->

web/themes/PaperMod/.github/ISSUE_TEMPLATE/config.yml

@@ -0,0 +1,5 @@
+blank_issues_enabled: false
+contact_links:
+  - name: PaperMod Discussions
+    url: https://github.com/adityatelange/hugo-PaperMod/discussions
+    about: Please ask and answer questions/doubts here, do not open an issue for questions.

web/themes/PaperMod/.github/ISSUE_TEMPLATE/new-blank-issue.md

@@ -0,0 +1,7 @@
+---
+name: New Blank Issue
+about: Anything other than bug report
+title: ""
+labels: ""
+assignees: ""
+---

web/themes/PaperMod/.github/PULL_REQUEST_TEMPLATE.md

@@ -0,0 +1,44 @@
+<!--
+
+## READ BEFORE OPENING A PR
+
+Thank you for contributing to hugo-PaperMod!
+Please fill out the following questions to make it easier for us to review your
+changes. You do not need to check all the boxes below.
+
+**NOTE**: PaperMod does not have any external dependencies fetched from 3rd party
+CDN servers. However we do have custom Head/Footer extender templates which you can use
+to add those to your website.
+https://github.com/adityatelange/hugo-PaperMod/wiki/FAQs#custom-head--footer
+
+-->
+
+
+**What does this PR change? What problem does it solve?**
+
+<!--
+Describe the changes and their purpose here, as detailed as and if  needed.
+
+Please do not add 2 unrelated changes in a single PR as it is difficult to track/revert those in future.
+-->
+
+
+**Was the change discussed in an issue or in the Discussions before?**
+
+<!--
+Link issues and relevant Discussions posts here.
+
+If this PR resolves an issue on GitHub, use "Closes #1234" so that the issue
+is closed automatically when this PR is merged.
+-->
+
+
+## PR Checklist
+
+- [ ] This change adds/updates translations and I have used the [template present here](https://github.com/adityatelange/hugo-PaperMod/wiki/Translations#want-to-add-your-language-).
+- [ ] I have enabled [maintainer edits for this PR](https://help.github.com/en/github/collaborating-with-issues-and-pull-requests/allowing-changes-to-a-pull-request-branch-created-from-a-fork).
+- [ ] I have verified that the code works as described/as intended.
+- [ ] This change adds a Social Icon which has a permissive license to use it.
+- [ ] This change **does not** include any CDN resources/links.
+- [ ] This change **does not** include any unrelated scripts such as bash and python scripts.
+- [ ] This change updates the overridden internal templates from HUGO's repository.

web/themes/PaperMod/.github/stale.yml

@@ -0,0 +1,17 @@
+# Number of days of inactivity before an issue becomes stale
+daysUntilStale: 7
+# Number of days of inactivity before a stale issue is closed
+daysUntilClose: 3
+# Issues with these labels will never be considered stale
+exemptLabels:
+  - pinned
+  - keep
+# Label to use when marking an issue as stale
+staleLabel: stale
+# Comment to post when marking an issue as stale. Set to `false` to disable
+markComment: >
+  This issue has been automatically marked as stale because it has not had
+  recent activity. It will be closed if no further activity occurs. Thank you
+  for your contributions.
+# Comment to post when closing a stale issue. Set to `false` to disable
+closeComment: false

web/themes/PaperMod/.github/workflows/gh-pages.yml

@@ -0,0 +1,80 @@
+name: Deploy Hugo PaperMod Demo to Pages
+
+on:
+  push:
+    paths-ignore:
+      - "images/**"
+      - "LICENSE"
+      - "README.md"
+    branches:
+      - master
+      - exampleSite
+  workflow_dispatch:
+    # manual run
+    inputs:
+      hugoVersion:
+        description: "Hugo Version"
+        required: false
+        default: "0.97.1"
+
+# Allow one concurrent deployment
+concurrency:
+  group: "pages"
+  cancel-in-progress: true
+
+# Default to bash
+defaults:
+  run:
+    shell: bash
+
+# Sets permissions of the GITHUB_TOKEN to allow deployment to GitHub Pages
+permissions:
+  contents: read
+  pages: write
+  id-token: write
+
+jobs:
+  # Build job
+  build:
+    runs-on: ubuntu-latest
+    env:
+      HUGO_VERSION: "0.97.1"
+    steps:
+      - name: Check version
+        if: ${{ github.event.inputs.hugoVersion }}
+        run: export HUGO_VERSION="${{ github.event.inputs.hugoVersion }}"
+      - name: Install Hugo CLI
+        run: |
+          wget -O ${{ runner.temp }}/hugo.deb https://github.com/gohugoio/hugo/releases/download/v${HUGO_VERSION}/hugo_${HUGO_VERSION}_Linux-64bit.deb \
+          && sudo dpkg -i ${{ runner.temp }}/hugo.deb
+      - name: Checkout
+        uses: actions/checkout@v3
+        with:
+          ref: exampleSite
+      - name: Setup Pages
+        id: pages
+        uses: actions/configure-pages@v1
+      - name: Get Theme
+        run: git submodule update --init --recursive
+      - name: Update theme to Latest commit
+        run: git submodule update --remote --merge
+      - name: Build with Hugo
+        run: |
+          hugo \
+            --buildDrafts --gc --verbose \
+            --baseURL ${{ steps.pages.outputs.base_url }}
+      - name: Upload artifact
+        uses: actions/upload-pages-artifact@v1
+        with:
+          path: ./public
+  # Deployment job
+  deploy:
+    environment:
+      name: github-pages
+      url: ${{ steps.deployment.outputs.page_url }}
+    runs-on: ubuntu-latest
+    needs: build
+    steps:
+      - name: Deploy to GitHub Pages
+        id: deployment
+        uses: actions/deploy-pages@v1

web/themes/PaperMod/LICENSE

@@ -0,0 +1,22 @@
+MIT License
+
+Copyright (c) 2020 nanxiaobei and adityatelange
+Copyright (c) 2021-2023 adityatelange
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.

web/themes/PaperMod/README.md

@@ -0,0 +1,103 @@
+<h1 align=center>Hugo PaperMod | <a href="https://adityatelange.github.io/hugo-PaperMod/" rel="nofollow">Demo</a></h1>
+
+<h4 align=center>☄️ Fast | ☁️ Fluent | 🌙 Smooth | 📱 Responsive</h4>
+<br>
+
+> Hugo PaperMod is a theme based on [hugo-paper](https://github.com/nanxiaobei/hugo-paper).
+> The goal of this project is to add more features and customization to the og theme.
+
+**Documentation** can be found here: [**📚 Wiki**](https://github.com/adityatelange/hugo-PaperMod/wiki)
+
+**ExampleSite** can be found here: [**exampleSite**](https://github.com/adityatelange/hugo-PaperMod/tree/exampleSite). Demo is built up with [exampleSite](https://github.com/adityatelange/hugo-PaperMod/tree/exampleSite) as source.
+
+[![hugo-papermod](https://img.shields.io/badge/Hugo--Themes-@PaperMod-blue)](https://themes.gohugo.io/themes/hugo-papermod/)
+[![Minimum Hugo Version](https://img.shields.io/static/v1?label=HUGO-version&message=>0.97.1&color=blue&logo=hugo)](https://github.com/gohugoio/hugo/releases/tag/v0.97.1)
+[![Discord](https://img.shields.io/discord/971046860317921340?label=Discord&logo=discord)](https://discord.gg/ahpmTvhVmp)
+[![GitHub](https://img.shields.io/github/license/adityatelange/hugo-PaperMod)](https://github.com/adityatelange/hugo-PaperMod/blob/master/LICENSE)
+![code-size](https://img.shields.io/github/languages/code-size/adityatelange/hugo-PaperMod)
+
+---
+
+<p align="center">
+  <kbd><img src="https://user-images.githubusercontent.com/21258296/114303440-bfc0ae80-9aeb-11eb-8cfa-48a4bb385a6d.png" alt="Mockup image" title="Mockup"/></kbd>
+</p>
+
+---
+
+## Features/Mods 💥
+
+-   Uses Hugo's asset generator with pipelining, fingerprinting, bundling and minification by default.
+-   3 Modes:
+    -   [Regular Mode.](https://github.com/adityatelange/hugo-PaperMod/wiki/Features#regular-mode-default-mode)
+    -   [Home-Info Mode.](https://github.com/adityatelange/hugo-PaperMod/wiki/Features#home-info-mode)
+    -   [Profile Mode.](https://github.com/adityatelange/hugo-PaperMod/wiki/Features#profile-mode)
+-   Table of Content Generation (newer implementation).
+-   Archive of posts.
+-   Social Icons (home-info and profile-mode)
+-   Social-Media Share buttons on posts.
+-   Menu location indicator.
+-   Multilingual support. (with language selector)
+-   Taxonomies
+-   Cover image for each post (with Responsive image support).
+-   Light/Dark theme (automatic theme switch a/c to browser theme and theme-switch button).
+-   SEO Friendly.
+-   Multiple Author support.
+-   Search Page with Fuse.js
+-   Other Posts suggestion below a post
+-   Breadcrumb Navigation
+-   Code Block Copy buttons
+-   No webpack, nodejs and other dependencies are required to edit the theme.
+
+Read Wiki For More Details => **[PaperMod - Features](https://github.com/adityatelange/hugo-PaperMod/wiki/Features)**
+
+---
+
+## Install/Update 📥
+
+Read Wiki For More Details => **[PaperMod - Installation](https://github.com/adityatelange/hugo-PaperMod/wiki/Installation)**
+
+---
+
+## FAQs / How To's Guide 🙋
+
+Read Wiki For More Details => **[PaperMod-FAQs](https://github.com/adityatelange/hugo-PaperMod/wiki/FAQs)**
+
+---
+
+## Social-Icons/Share-Icons 🖼️
+
+Read Wiki For More Details => **[PaperMod-Icons](https://github.com/adityatelange/hugo-PaperMod/wiki/Icons)**
+
+---
+
+## Release Changelog 📃
+
+Release ChangeLog has info about stuff added: **[Releases](https://github.com/adityatelange/hugo-PaperMod/releases)**
+
+---
+
+## [Pagespeed Insights (100% ?)](https://pagespeed.web.dev/report?url=https://adityatelange.github.io/hugo-PaperMod/) 👀
+
+---
+
+## Support 🫶
+
+-   Star 🌟 this repository.
+-   Help spread the word about PaperMod by sharing it on social media and recommending it to your friends. 🗣️
+-   You can also sponsor 🏅 on [Github Sponsors](https://github.com/sponsors/adityatelange) / [Ko-Fi](https://ko-fi.com/adityatelange).
+
+---
+
+## Special Thanks 🌟
+
+-   [**Highlight.js**](https://github.com/highlightjs/highlight.js)
+-   [**Fuse.js**](https://github.com/krisk/fuse)
+-   [**Feather Icons**](https://github.com/feathericons/feather)
+-   [**Simple Icons**](https://github.com/simple-icons/simple-icons)
+-   **All Contributors and Supporters**
+
+---
+
+## Stargazers over time 📈
+
+<kbd>[![Stargazers over time](https://starchart.cc/adityatelange/hugo-PaperMod.svg)](https://starchart.cc/adityatelange/hugo-PaperMod)</kbd>

web/themes/PaperMod/assets/css/common/404.css

@@ -0,0 +1,11 @@
+.not-found {
+    position: absolute;
+    left: 0;
+    right: 0;
+    display: flex;
+    align-items: center;
+    justify-content: center;
+    height: 80%;
+    font-size: 160px;
+    font-weight: 700;
+}

web/themes/PaperMod/assets/css/common/archive.css

@@ -0,0 +1,44 @@
+.archive-posts {
+    width: 100%;
+    font-size: 16px;
+}
+
+.archive-year {
+    margin-top: 40px;
+}
+
+.archive-year:not(:last-of-type) {
+    border-bottom: 2px solid var(--border);
+}
+
+.archive-month {
+    display: flex;
+    align-items: flex-start;
+    padding: 10px 0;
+}
+
+.archive-month-header {
+    margin: 25px 0;
+    width: 200px;
+}
+
+.archive-month:not(:last-of-type) {
+    border-bottom: 1px solid var(--border);
+}
+
+.archive-entry {
+    position: relative;
+    padding: 5px;
+    margin: 10px 0;
+}
+
+.archive-entry-title {
+    margin: 5px 0;
+    font-weight: 400;
+}
+
+.archive-count,
+.archive-meta {
+    color: var(--secondary);
+    font-size: 14px;
+}

web/themes/PaperMod/assets/css/common/footer.css

@@ -0,0 +1,60 @@
+.footer,
+.top-link {
+    font-size: 12px;
+    color: var(--secondary);
+}
+
+.footer {
+    max-width: calc(var(--main-width) + var(--gap) * 2);
+    margin: auto;
+    padding: calc((var(--footer-height) - var(--gap)) / 2) var(--gap);
+    text-align: center;
+    line-height: 24px;
+}
+
+.footer span {
+    margin-inline-start: 1px;
+    margin-inline-end: 1px;
+}
+
+.footer span:last-child {
+    white-space: nowrap;
+}
+
+.footer a {
+    color: inherit;
+    border-bottom: 1px solid var(--secondary);
+}
+
+.footer a:hover {
+    border-bottom: 1px solid var(--primary);
+}
+
+.top-link {
+    visibility: hidden;
+    position: fixed;
+    bottom: 60px;
+    right: 30px;
+    z-index: 99;
+    background: var(--tertiary);
+    width: 42px;
+    height: 42px;
+    padding: 12px;
+    border-radius: 64px;
+    transition: visibility 0.5s, opacity 0.8s linear;
+}
+
+.top-link,
+.top-link svg {
+    filter: drop-shadow(0px 0px 0px var(--theme));
+}
+
+.footer a:hover,
+.top-link:hover {
+    color: var(--primary);
+}
+
+.top-link:focus,
+#theme-toggle:focus {
+    outline: 0;
+}

web/themes/PaperMod/assets/css/common/header.css

@@ -0,0 +1,93 @@
+.nav {
+    display: flex;
+    flex-wrap: wrap;
+    justify-content: space-between;
+    max-width: calc(var(--nav-width) + var(--gap) * 2);
+    margin-inline-start: auto;
+    margin-inline-end: auto;
+    line-height: var(--header-height);
+}
+
+.nav a {
+    display: block;
+}
+
+.logo,
+#menu {
+    display: flex;
+    margin: auto var(--gap);
+}
+
+.logo {
+    flex-wrap: inherit;
+}
+
+.logo a {
+    font-size: 24px;
+    font-weight: 700;
+}
+
+.logo a img, .logo a svg {
+    display: inline;
+    vertical-align: middle;
+    pointer-events: none;
+    transform: translate(0, -10%);
+    border-radius: 6px;
+    margin-inline-end: 8px;
+}
+
+button#theme-toggle {
+    font-size: 26px;
+    margin: auto 4px;
+}
+
+body.dark #moon {
+    vertical-align: middle;
+    display: none;
+}
+
+body:not(.dark) #sun {
+    display: none;
+}
+
+#menu {
+    list-style: none;
+    word-break: keep-all;
+    overflow-x: auto;
+    white-space: nowrap;
+}
+
+#menu li + li {
+    margin-inline-start: var(--gap);
+}
+
+#menu a {
+    font-size: 16px;
+}
+
+#menu .active {
+    font-weight: 500;
+    border-bottom: 2px solid currentColor;
+}
+
+.lang-switch li,
+.lang-switch ul,
+.logo-switches {
+    display: inline-flex;
+    margin: auto 4px;
+}
+
+.lang-switch {
+    display: flex;
+    flex-wrap: inherit;
+}
+
+.lang-switch a {
+    margin: auto 3px;
+    font-size: 16px;
+    font-weight: 500;
+}
+
+.logo-switches {
+    flex-wrap: inherit;
+}

web/themes/PaperMod/assets/css/common/main.css

@@ -0,0 +1,68 @@
+.main {
+    position: relative;
+    min-height: calc(100vh - var(--header-height) - var(--footer-height));
+    max-width: calc(var(--main-width) + var(--gap) * 2);
+    margin: auto;
+    padding: var(--gap);
+}
+
+.page-header h1 {
+    font-size: 40px;
+}
+
+.pagination {
+    display: flex;
+}
+
+.pagination a {
+    color: var(--theme);
+    font-size: 13px;
+    line-height: 36px;
+    background: var(--primary);
+    border-radius: calc(36px / 2);
+    padding: 0 16px;
+}
+
+.pagination .next {
+    margin-inline-start: auto;
+}
+
+.social-icons {
+    padding: 12px 0;
+}
+
+.social-icons a:not(:last-of-type) {
+    margin-inline-end: 12px;
+}
+
+.social-icons a svg {
+    height: 26px;
+    width: 26px;
+}
+
+code {
+    direction: ltr;
+}
+
+div.highlight,
+pre {
+    position: relative;
+}
+
+.copy-code {
+    display: none;
+    position: absolute;
+    top: 4px;
+    right: 4px;
+    color: rgba(255, 255, 255, 0.8);
+    background: rgba(78, 78, 78, 0.8);
+    border-radius: var(--radius);
+    padding: 0 5px;
+    font-size: 14px;
+    user-select: none;
+}
+
+div.highlight:hover .copy-code,
+pre:hover .copy-code {
+    display: block;
+}

web/themes/PaperMod/assets/css/common/post-entry.css

@@ -0,0 +1,104 @@
+.first-entry {
+    position: relative;
+    display: flex;
+    flex-direction: column;
+    justify-content: center;
+    min-height: 320px;
+    margin: var(--gap) 0 calc(var(--gap) * 2) 0;
+}
+
+.first-entry .entry-header {
+    overflow: hidden;
+    display: -webkit-box;
+    -webkit-box-orient: vertical;
+    -webkit-line-clamp: 3;
+}
+
+.first-entry .entry-header h1 {
+    font-size: 34px;
+    line-height: 1.3;
+}
+
+.first-entry .entry-content {
+    margin: 14px 0;
+    font-size: 16px;
+    -webkit-line-clamp: 3;
+}
+
+.first-entry .entry-footer {
+    font-size: 14px;
+}
+
+.home-info .entry-content {
+    -webkit-line-clamp: unset;
+}
+
+.post-entry {
+    position: relative;
+    margin-bottom: var(--gap);
+    padding: var(--gap);
+    background: var(--entry);
+    border-radius: var(--radius);
+    transition: transform 0.1s;
+    border: 1px solid var(--border);
+}
+
+.post-entry:active {
+    transform: scale(0.96);
+}
+
+.tag-entry .entry-cover {
+    display: none;
+}
+
+.entry-header h2 {
+    font-size: 24px;
+    line-height: 1.3;
+}
+
+.entry-content {
+    margin: 8px 0;
+    color: var(--secondary);
+    font-size: 14px;
+    line-height: 1.6;
+    overflow: hidden;
+    display: -webkit-box;
+    -webkit-box-orient: vertical;
+    -webkit-line-clamp: 2;
+}
+
+.entry-footer {
+    color: var(--secondary);
+    font-size: 13px;
+}
+
+.entry-link {
+    position: absolute;
+    left: 0;
+    right: 0;
+    top: 0;
+    bottom: 0;
+}
+
+.entry-cover,
+.entry-isdraft {
+    font-size: 14px;
+    color: var(--secondary);
+}
+
+.entry-cover {
+    margin-bottom: var(--gap);
+    text-align: center;
+}
+
+.entry-cover img {
+    border-radius: var(--radius);
+    pointer-events: none;
+    width: 100%;
+    height: auto;
+}
+
+.entry-cover a {
+    color: var(--secondary);
+    box-shadow: 0 1px 0 var(--primary);
+}

web/themes/PaperMod/assets/css/common/post-single.css

@@ -0,0 +1,402 @@
+.page-header,
+.post-header {
+    margin: 24px auto var(--content-gap) auto;
+}
+
+.post-title {
+    margin-bottom: 2px;
+    font-size: 40px;
+}
+
+.post-description {
+    margin-top: 10px;
+    margin-bottom: 5px;
+}
+
+.post-meta,
+.breadcrumbs {
+    color: var(--secondary);
+    font-size: 14px;
+    display: flex;
+    flex-wrap: wrap;
+}
+
+.post-meta .i18n_list li {
+    display: inline-flex;
+    list-style: none;
+    margin: auto 3px;
+    box-shadow: 0 1px 0 var(--secondary);
+}
+
+.breadcrumbs a {
+    font-size: 16px;
+}
+
+.post-content {
+    color: var(--content);
+}
+
+.post-content h3,
+.post-content h4,
+.post-content h5,
+.post-content h6 {
+    margin: 24px 0 16px;
+}
+
+.post-content h1 {
+    margin: 40px auto 32px;
+    font-size: 40px;
+}
+
+.post-content h2 {
+    margin: 32px auto 24px;
+    font-size: 32px;
+}
+
+.post-content h3 {
+    font-size: 24px;
+}
+
+.post-content h4 {
+    font-size: 16px;
+}
+
+.post-content h5 {
+    font-size: 14px;
+}
+
+.post-content h6 {
+    font-size: 12px;
+}
+
+.post-content a,
+.toc a:hover {
+    box-shadow: 0 1px 0;
+    box-decoration-break: clone;
+    -webkit-box-decoration-break: clone;
+}
+
+.post-content a code {
+    margin: auto 0;
+    border-radius: 0;
+    box-shadow: 0 -1px 0 var(--primary) inset;
+}
+
+.post-content del {
+    text-decoration: line-through;
+}
+
+.post-content dl,
+.post-content ol,
+.post-content p,
+.post-content figure,
+.post-content ul {
+    margin-bottom: var(--content-gap);
+}
+
+.post-content ol,
+.post-content ul {
+    padding-inline-start: 20px;
+}
+
+.post-content li {
+    margin-top: 5px;
+}
+
+.post-content li p {
+    margin-bottom: 0;
+}
+
+.post-content dl {
+    display: flex;
+    flex-wrap: wrap;
+    margin: 0;
+}
+
+.post-content dt {
+    width: 25%;
+    font-weight: 700;
+}
+
+.post-content dd {
+    width: 75%;
+    margin-inline-start: 0;
+    padding-inline-start: 10px;
+}
+
+.post-content dd ~ dd,
+.post-content dt ~ dt {
+    margin-top: 10px;
+}
+
+.post-content table {
+    margin-bottom: 32px;
+}
+
+.post-content table th,
+.post-content table:not(.highlighttable, .highlight table, .gist .highlight) td {
+    min-width: 80px;
+    padding: 12px 8px;
+    line-height: 1.5;
+    border-bottom: 1px solid var(--border);
+}
+
+.post-content table th {
+    font-size: 14px;
+    text-align: start;
+}
+
+.post-content table:not(.highlighttable) td code:only-child {
+    margin: auto 0;
+}
+
+.post-content .highlight table {
+    border-radius: var(--radius);
+}
+
+.post-content .highlight:not(table) {
+    margin: 10px auto;
+    background: var(--hljs-bg) !important;
+    border-radius: var(--radius);
+    direction: ltr;
+}
+
+.post-content li > .highlight {
+    margin-inline-end: 0;
+}
+
+.post-content ul pre {
+    margin-inline-start: calc(var(--gap) * -2);
+}
+
+.post-content .highlight pre {
+    margin: 0;
+}
+
+.post-content .highlighttable {
+    table-layout: fixed;
+}
+
+.post-content .highlighttable td:first-child {
+    width: 40px;
+}
+
+.post-content .highlighttable td .linenodiv {
+    padding-inline-end: 0 !important;
+}
+
+.post-content .highlighttable td .highlight,
+.post-content .highlighttable td .linenodiv pre {
+    margin-bottom: 0;
+}
+
+.post-content code {
+    margin: auto 4px;
+    padding: 4px 6px;
+    font-size: 0.78em;
+    line-height: 1.5;
+    background: var(--code-bg);
+    border-radius: 2px;
+}
+
+.post-content pre code {
+    display: block;
+    margin: auto 0;
+    padding: 10px;
+    color: rgb(213, 213, 214);
+    background: var(--hljs-bg) !important;
+    border-radius: var(--radius);
+    overflow-x: auto;
+    word-break: break-all;
+}
+
+.post-content blockquote {
+    margin: 20px 0;
+    padding: 0 14px;
+    border-inline-start: 3px solid var(--primary);
+}
+
+.post-content hr {
+    margin: 30px 0;
+    height: 2px;
+    background: var(--tertiary);
+    border: 0;
+}
+
+.post-content iframe {
+    max-width: 100%;
+}
+
+.post-content img {
+    border-radius: 4px;
+    margin: 1rem 0;
+}
+
+.post-content img[src*="#center"] {
+    margin: 1rem auto;
+}
+
+.post-content figure.align-center {
+    text-align: center;
+}
+
+.post-content figure > figcaption {
+    color: var(--primary);
+    font-size: 16px;
+    font-weight: bold;
+    margin: 8px 0 16px;
+}
+
+.post-content figure > figcaption > p {
+    color: var(--secondary);
+    font-size: 14px;
+    font-weight: normal;
+}
+
+.toc {
+    margin: 0 2px 40px 2px;
+    border: 1px solid var(--border);
+    background: var(--code-bg);
+    border-radius: var(--radius);
+    padding: 0.4em;
+}
+
+.dark .toc {
+    background: var(--entry);
+}
+
+.toc details summary {
+    cursor: zoom-in;
+    margin-inline-start: 20px;
+}
+
+.toc details[open] summary {
+    cursor: zoom-out;
+}
+
+.toc .details {
+    display: inline;
+    font-weight: 500;
+}
+
+.toc .inner {
+    margin: 0 20px;
+    padding: 10px 20px;
+}
+
+.toc li ul {
+    margin-inline-start: var(--gap);
+}
+
+.toc summary:focus {
+    outline: 0;
+}
+
+.post-footer {
+    margin-top: 56px;
+}
+
+.post-tags li {
+    display: inline-block;
+    margin-inline-end: 3px;
+    margin-bottom: 5px;
+}
+
+.post-tags a,
+.share-buttons,
+.paginav {
+    border-radius: var(--radius);
+    background: var(--code-bg);
+    border: 1px solid var(--border);
+}
+
+.post-tags a {
+    display: block;
+    padding-inline-start: 14px;
+    padding-inline-end: 14px;
+    color: var(--secondary);
+    font-size: 14px;
+    line-height: 34px;
+    background: var(--code-bg);
+}
+
+.post-tags a:hover,
+.paginav a:hover {
+    background: var(--border);
+}
+
+.share-buttons {
+    margin: 14px 0;
+    padding-inline-start: var(--radius);
+    display: flex;
+    justify-content: center;
+    overflow-x: auto;
+}
+
+.share-buttons a {
+    margin-top: 10px;
+}
+
+.share-buttons a:not(:last-of-type) {
+    margin-inline-end: 12px;
+}
+
+h1:hover .anchor,
+h2:hover .anchor,
+h3:hover .anchor,
+h4:hover .anchor,
+h5:hover .anchor,
+h6:hover .anchor {
+    display: inline-flex;
+    color: var(--secondary);
+    margin-inline-start: 8px;
+    font-weight: 500;
+    user-select: none;
+}
+
+.paginav {
+    margin: 10px 0;
+    display: flex;
+    line-height: 30px;
+    border-radius: var(--radius);
+}
+
+.paginav a {
+    padding-inline-start: 14px;
+    padding-inline-end: 14px;
+    border-radius: var(--radius);
+}
+
+.paginav .title {
+    letter-spacing: 1px;
+    text-transform: uppercase;
+    font-size: small;
+    color: var(--secondary);
+}
+
+.paginav .prev,
+.paginav .next {
+    width: 50%;
+}
+
+.paginav span:hover:not(.title) {
+    box-shadow: 0 1px 0;
+}
+
+.paginav .next {
+    margin-inline-start: auto;
+    text-align: right;
+}
+
+[dir="rtl"] .paginav .next {
+    text-align: left;
+}
+
+h1>a>svg {
+    display: inline;
+}
+
+img.in-text {
+    display: inline;
+    margin: auto;
+}

web/themes/PaperMod/assets/css/common/profile-mode.css

@@ -0,0 +1,42 @@
+.buttons,
+.main .profile {
+    display: flex;
+    justify-content: center;
+}
+
+.main .profile {
+    align-items: center;
+    min-height: calc(100vh - var(--header-height) - var(--footer-height) - (var(--gap) * 2));
+    text-align: center;
+}
+
+.profile .profile_inner h1 {
+    padding: 12px 0;
+}
+
+.profile img {
+    display: inline-table;
+    border-radius: 50%;
+}
+
+.buttons {
+    flex-wrap: wrap;
+    max-width: 400px;
+    margin: 0 auto;
+}
+
+.button {
+    background: var(--tertiary);
+    border-radius: var(--radius);
+    margin: 8px;
+    padding: 6px;
+    transition: transform 0.1s;
+}
+
+.button-inner {
+    padding: 0 8px;
+}
+
+.button:active {
+    transform: scale(0.96);
+}

web/themes/PaperMod/assets/css/common/search.css

@@ -0,0 +1,45 @@
+#searchbox input {
+    padding: 4px 10px;
+    width: 100%;
+    color: var(--primary);
+    font-weight: bold;
+    border: 2px solid var(--tertiary);
+    border-radius: var(--radius);
+}
+
+#searchbox input:focus {
+    border-color: var(--secondary);
+}
+
+#searchResults li {
+    list-style: none;
+    border-radius: var(--radius);
+    padding: 10px;
+    margin: 10px 0;
+    position: relative;
+    font-weight: 500;
+}
+
+#searchResults {
+    margin: 10px 0;
+    width: 100%;
+}
+
+#searchResults li:active {
+    transition: transform 0.1s;
+    transform: scale(0.98);
+}
+
+#searchResults a {
+    position: absolute;
+    width: 100%;
+    height: 100%;
+    top: 0px;
+    left: 0px;
+    outline: none;
+}
+
+#searchResults .focus {
+    transform: scale(0.98);
+    border: 2px solid var(--tertiary);
+}

web/themes/PaperMod/assets/css/common/terms.css

@@ -0,0 +1,18 @@
+.terms-tags li {
+    display: inline-block;
+    margin: 10px;
+    font-weight: 500;
+}
+
+.terms-tags a {
+    display: block;
+    padding: 3px 10px;
+    background: var(--tertiary);
+    border-radius: 6px;
+    transition: transform 0.1s;
+}
+
+.terms-tags a:active {
+    background: var(--tertiary);
+    transform: scale(0.96);
+}

web/themes/PaperMod/assets/css/core/license.css

@@ -0,0 +1,6 @@
+/*
+  PaperMod v7
+  License: MIT https://github.com/adityatelange/hugo-PaperMod/blob/master/LICENSE
+  Copyright (c) 2020 nanxiaobei and adityatelange
+  Copyright (c) 2021-2023 adityatelange
+*/

web/themes/PaperMod/assets/css/core/reset.css

@@ -0,0 +1,116 @@
+*,
+::after,
+::before {
+    box-sizing: border-box;
+}
+
+html {
+    -webkit-tap-highlight-color: transparent;
+    overflow-y: scroll;
+}
+
+a,
+button,
+body,
+h1,
+h2,
+h3,
+h4,
+h5,
+h6 {
+    color: var(--primary);
+}
+
+body {
+    font-family: -apple-system, BlinkMacSystemFont, 'Segoe UI', Roboto, Oxygen, Ubuntu, Cantarell, 'Open Sans', 'Helvetica Neue', sans-serif;
+    font-size: 18px;
+    line-height: 1.6;
+    word-break: break-word;
+    background: var(--theme);
+}
+
+article,
+aside,
+figcaption,
+figure,
+footer,
+header,
+hgroup,
+main,
+nav,
+section,
+table {
+    display: block;
+}
+
+h1,
+h2,
+h3,
+h4,
+h5,
+h6 {
+    line-height: 1.2;
+}
+
+h1,
+h2,
+h3,
+h4,
+h5,
+h6,
+p {
+    margin-top: 0;
+    margin-bottom: 0;
+}
+
+ul {
+    padding: 0;
+}
+
+a {
+    text-decoration: none;
+}
+
+body,
+figure,
+ul {
+    margin: 0;
+}
+
+table {
+    width: 100%;
+    border-collapse: collapse;
+    border-spacing: 0;
+    overflow-x: auto;
+    word-break: keep-all;
+}
+
+button,
+input,
+textarea {
+    padding: 0;
+    font: inherit;
+    background: 0 0;
+    border: 0;
+}
+
+input,
+textarea {
+    outline: 0;
+}
+
+button,
+input[type=button],
+input[type=submit] {
+    cursor: pointer;
+}
+
+input:-webkit-autofill,
+textarea:-webkit-autofill {
+    box-shadow: 0 0 0 50px var(--theme) inset;
+}
+
+img {
+    display: block;
+    max-width: 100%;
+}

web/themes/PaperMod/assets/css/core/theme-vars.css

@@ -0,0 +1,38 @@
+:root {
+    --gap: 24px;
+    --content-gap: 20px;
+    --nav-width: 1024px;
+    --main-width: 720px;
+    --header-height: 60px;
+    --footer-height: 60px;
+    --radius: 8px;
+    --theme: rgb(255, 255, 255);
+    --entry: rgb(255, 255, 255);
+    --primary: rgb(30, 30, 30);
+    --secondary: rgb(108, 108, 108);
+    --tertiary: rgb(214, 214, 214);
+    --content: rgb(31, 31, 31);
+    --hljs-bg: rgb(28, 29, 33);
+    --code-bg: rgb(245, 245, 245);
+    --border: rgb(238, 238, 238);
+}
+
+.dark {
+    --theme: rgb(29, 30, 32);
+    --entry: rgb(46, 46, 51);
+    --primary: rgb(218, 218, 219);
+    --secondary: rgb(155, 156, 157);
+    --tertiary: rgb(65, 66, 68);
+    --content: rgb(196, 196, 197);
+    --hljs-bg: rgb(46, 46, 51);
+    --code-bg: rgb(55, 56, 62);
+    --border: rgb(51, 51, 51);
+}
+
+.list {
+    background: var(--code-bg);
+}
+
+.dark.list {
+    background: var(--theme);
+}

web/themes/PaperMod/assets/css/core/zmedia.css

@@ -0,0 +1,49 @@
+@media screen and (max-width: 768px) {
+    /* theme-vars */
+    :root {
+        --gap: 14px;
+    }
+
+    /* profile-mode */
+    .profile img {
+        transform: scale(0.85);
+    }
+
+    /* post-entry */
+    .first-entry {
+        min-height: 260px;
+    }
+
+    /* archive */
+    .archive-month {
+        flex-direction: column;
+    }
+
+    .archive-year {
+        margin-top: 20px;
+    }
+
+    /* footer */
+    .footer {
+        padding: calc((var(--footer-height) - var(--gap) - 10px) / 2) var(--gap);
+    }
+}
+
+/* footer */
+@media screen and (max-width: 900px) {
+    .list .top-link {
+        transform: translateY(-5rem);
+    }
+}
+
+@media (prefers-reduced-motion) {
+    /* terms; profile-mode; post-single; post-entry; post-entry; search; search */
+    .terms-tags a:active,
+    .button:active,
+    .post-entry:active,
+    .top-link,
+    #searchResults .focus,
+    #searchResults li:active {
+        transform: none;
+    }
+}

web/themes/PaperMod/assets/css/extended/blank.css

@@ -0,0 +1,5 @@
+/*
+This is just a placeholder blank stylesheet so as to support adding custom styles budled with theme's default styles
+
+Read https://github.com/adityatelange/hugo-PaperMod/wiki/FAQs#bundling-custom-css-with-themes-assets for more info
+*/

web/themes/PaperMod/assets/css/hljs/an-old-hope.min.css

@@ -0,0 +1,63 @@
+.hljs-comment,
+.hljs-quote {
+    color: #b6b18b;
+}
+
+.hljs-deletion,
+.hljs-name,
+.hljs-regexp,
+.hljs-selector-class,
+.hljs-selector-id,
+.hljs-tag,
+.hljs-template-variable,
+.hljs-variable {
+    color: #eb3c54;
+}
+
+.hljs-built_in,
+.hljs-builtin-name,
+.hljs-link,
+.hljs-literal,
+.hljs-meta,
+.hljs-number,
+.hljs-params,
+.hljs-type {
+    color: #e7ce56;
+}
+
+.hljs-attribute {
+    color: #ee7c2b;
+}
+
+.hljs-addition,
+.hljs-bullet,
+.hljs-string,
+.hljs-symbol {
+    color: #4fb4d7;
+}
+
+.hljs-section,
+.hljs-title {
+    color: #78bb65;
+}
+
+.hljs-keyword,
+.hljs-selector-tag {
+    color: #b45ea4;
+}
+
+.hljs {
+    display: block;
+    overflow-x: auto;
+    background: #1c1d21;
+    color: #c0c5ce;
+    padding: .5em;
+}
+
+.hljs-emphasis {
+    font-style: italic;
+}
+
+.hljs-strong {
+    font-weight: 700;
+}

web/themes/PaperMod/assets/css/includes/scroll-bar.css

@@ -0,0 +1,63 @@
+/* from reset */
+::-webkit-scrollbar-track {
+    background: 0 0;
+}
+
+.list:not(.dark)::-webkit-scrollbar-track {
+    background: var(--code-bg);
+}
+
+::-webkit-scrollbar-thumb {
+    background: var(--tertiary);
+    border: 5px solid var(--theme);
+    border-radius: var(--radius);
+}
+
+.list:not(.dark)::-webkit-scrollbar-thumb {
+    border: 5px solid var(--code-bg);
+}
+
+::-webkit-scrollbar-thumb:hover {
+    background: var(--secondary);
+}
+
+::-webkit-scrollbar:not(.highlighttable, .highlight table, .gist .highlight) {
+    background: var(--theme);
+}
+
+/* from post-single */
+.post-content .highlighttable td .highlight pre code::-webkit-scrollbar {
+    display: none;
+}
+
+.post-content :not(table) ::-webkit-scrollbar-thumb {
+    border: 2px solid var(--hljs-bg);
+    background: rgb(113, 113, 117);
+}
+
+.post-content :not(table) ::-webkit-scrollbar-thumb:hover {
+    background: rgb(163, 163, 165);
+}
+
+.gist table::-webkit-scrollbar-thumb {
+    border: 2px solid rgb(255, 255, 255);
+    background: rgb(173, 173, 173);
+}
+
+.gist table::-webkit-scrollbar-thumb:hover {
+    background: rgb(112, 112, 112);
+}
+
+.post-content table::-webkit-scrollbar-thumb {
+    border-width: 2px;
+}
+
+/* from zmedia */
+@media screen and (min-width: 768px) {
+
+    /* reset */
+    ::-webkit-scrollbar {
+        width: 19px;
+        height: 11px;
+    }
+}

web/themes/PaperMod/assets/js/fastsearch.js

@@ -0,0 +1,147 @@
+import * as params from '@params';
+
+let fuse; // holds our search engine
+let resList = document.getElementById('searchResults');
+let sInput = document.getElementById('searchInput');
+let first, last, current_elem = null
+let resultsAvailable = false;
+
+// load our search index
+window.onload = function () {
+    let xhr = new XMLHttpRequest();
+    xhr.onreadystatechange = function () {
+        if (xhr.readyState === 4) {
+            if (xhr.status === 200) {
+                let data = JSON.parse(xhr.responseText);
+                if (data) {
+                    // fuse.js options; check fuse.js website for details
+                    let options = {
+                        distance: 100,
+                        threshold: 0.4,
+                        ignoreLocation: true,
+                        keys: [
+                            'title',
+                            'permalink',
+                            'summary',
+                            'content'
+                        ]
+                    };
+                    if (params.fuseOpts) {
+                        options = {
+                            isCaseSensitive: params.fuseOpts.iscasesensitive ?? false,
+                            includeScore: params.fuseOpts.includescore ?? false,
+                            includeMatches: params.fuseOpts.includematches ?? false,
+                            minMatchCharLength: params.fuseOpts.minmatchcharlength ?? 1,
+                            shouldSort: params.fuseOpts.shouldsort ?? true,
+                            findAllMatches: params.fuseOpts.findallmatches ?? false,
+                            keys: params.fuseOpts.keys ?? ['title', 'permalink', 'summary', 'content'],
+                            location: params.fuseOpts.location ?? 0,
+                            threshold: params.fuseOpts.threshold ?? 0.4,
+                            distance: params.fuseOpts.distance ?? 100,
+                            ignoreLocation: params.fuseOpts.ignorelocation ?? true
+                        }
+                    }
+                    fuse = new Fuse(data, options); // build the index from the json file
+                }
+            } else {
+                console.log(xhr.responseText);
+            }
+        }
+    };
+    xhr.open('GET', "../index.json");
+    xhr.send();
+}
+
+function activeToggle(ae) {
+    document.querySelectorAll('.focus').forEach(function (element) {
+        // rm focus class
+        element.classList.remove("focus")
+    });
+    if (ae) {
+        ae.focus()
+        document.activeElement = current_elem = ae;
+        ae.parentElement.classList.add("focus")
+    } else {
+        document.activeElement.parentElement.classList.add("focus")
+    }
+}
+
+function reset() {
+    resultsAvailable = false;
+    resList.innerHTML = sInput.value = ''; // clear inputbox and searchResults
+    sInput.focus(); // shift focus to input box
+}
+
+// execute search as each character is typed
+sInput.onkeyup = function (e) {
+    // run a search query (for "term") every time a letter is typed
+    // in the search box
+    if (fuse) {
+        const results = fuse.search(this.value.trim()); // the actual query being run using fuse.js
+        if (results.length !== 0) {
+            // build our html if result exists
+            let resultSet = ''; // our results bucket
+
+            for (let item in results) {
+                resultSet += `<li class="post-entry"><header class="entry-header">${results[item].item.title}&nbsp;»</header>` +
+                    `<a href="${results[item].item.permalink}" aria-label="${results[item].item.title}"></a></li>`
+            }
+
+            resList.innerHTML = resultSet;
+            resultsAvailable = true;
+            first = resList.firstChild;
+            last = resList.lastChild;
+        } else {
+            resultsAvailable = false;
+            resList.innerHTML = '';
+        }
+    }
+}
+
+sInput.addEventListener('search', function (e) {
+    // clicked on x
+    if (!this.value) reset()
+})
+
+// kb bindings
+document.onkeydown = function (e) {
+    let key = e.key;
+    let ae = document.activeElement;
+
+    let inbox = document.getElementById("searchbox").contains(ae)
+
+    if (ae === sInput) {
+        let elements = document.getElementsByClassName('focus');
+        while (elements.length > 0) {
+            elements[0].classList.remove('focus');
+        }
+    } else if (current_elem) ae = current_elem;
+
+    if (key === "Escape") {
+        reset()
+    } else if (!resultsAvailable || !inbox) {
+        return
+    } else if (key === "ArrowDown") {
+        e.preventDefault();
+        if (ae == sInput) {
+            // if the currently focused element is the search input, focus the <a> of first <li>
+            activeToggle(resList.firstChild.lastChild);
+        } else if (ae.parentElement != last) {
+            // if the currently focused element's parent is last, do nothing
+            // otherwise select the next search result
+            activeToggle(ae.parentElement.nextSibling.lastChild);
+        }
+    } else if (key === "ArrowUp") {
+        e.preventDefault();
+        if (ae.parentElement == first) {
+            // if the currently focused element is first item, go to input box
+            activeToggle(sInput);
+        } else if (ae != sInput) {
+            // if the currently focused element is input box, do nothing
+            // otherwise select the previous search result
+            activeToggle(ae.parentElement.previousSibling.lastChild);
+        }
+    } else if (key === "ArrowRight") {
+        ae.click(); // click on active link
+    }
+}