Do not force derviation inputs, use booleans instead

In order to send email, the gitea user needs to be in the mail-robot
group.

Fixes: #220
Reviewed-by: Aleix Boné <abonerib@bsc.es>

m/module/tc1-board.nix

@@ -1,27 +0,0 @@
-{ lib, pkgs, ... }:
-
-{
-  # Allow user access to FTDI USB device
-  services.udev.packages = lib.singleton (pkgs.writeTextFile {
-    # Needs to be < 73
-    name = "60-ftdi-tc1.rules";
-    text = ''
-      # Bus 003 Device 003: ID 0403:6011 Future Technology Devices International, Ltd FT4232H Quad HS USB-UART/FIFO IC
-      # Use := to make sure it doesn't get changed later
-      SUBSYSTEMS=="usb", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6011", MODE:="0666", TAG+="uaccess"
-    '';
-    destination = "/etc/udev/rules.d/60-ftdi-tc1.rules";
-  });
-
-  # Allow access to USB for docker in GitLab runner
-  services.gitlab-runner = {
-    services.gitlab-bsc-docker = {
-      registrationFlags = [
-        # We need raw access to the USB port to reboot the board
-        "--docker-devices /dev/bus/usb/003/003"
-        # And TTY access for the serial port
-        "--docker-devices /dev/ttyUSB2"
-      ];
-    };
-  };
-}

m/owl1/configuration.nix

@@ -20,7 +20,7 @@
       address = "10.0.40.1";
       prefixLength = 24;
     } ];
-    interfaces.ibp5s0.ipv4.addresses = [ {
+    interfaces.ibs785.ipv4.addresses = [ {
       address = "10.0.42.1";
       prefixLength = 24;
     } ];

m/owl2/configuration.nix

@@ -21,7 +21,7 @@
       prefixLength = 24;
     } ];
     # Watch out! The OmniPath device is not in the same place here:
-    interfaces.ibp129s0.ipv4.addresses = [ {
+    interfaces.ibs801.ipv4.addresses = [ {
       address = "10.0.42.2";
       prefixLength = 24;
     } ];

m/tent/configuration.nix

@@ -16,7 +16,6 @@
     ../module/p.nix
     ../module/vpn-dac.nix
     ../module/hut-substituter.nix
-    ../module/tc1-board.nix
   ];
 
   # Select the this using the ID to avoid mismatches

overlay.nix

@@ -12,9 +12,9 @@ let
     bench6 = callPackage ./pkgs/bench6/default.nix { };
     bigotes = callPackage ./pkgs/bigotes/default.nix { };
     clangOmpss2 = callPackage ./pkgs/llvm-ompss2/default.nix { };
-    clangOmpss2Nanos6 = callPackage ./pkgs/llvm-ompss2/default.nix { ompss2rt = final.nanos6; };
+    clangOmpss2Nanos6 = callPackage ./pkgs/llvm-ompss2/default.nix { useNanos6 = true; };
-    clangOmpss2Nodes = callPackage ./pkgs/llvm-ompss2/default.nix { ompss2rt = final.nodes; openmp = final.openmp; };
+    clangOmpss2Nodes = callPackage ./pkgs/llvm-ompss2/default.nix { useNodes = true; useOpenmp = true; };
-    clangOmpss2NodesOmpv = callPackage ./pkgs/llvm-ompss2/default.nix { ompss2rt = final.nodes; openmp = final.openmpv; };
+    clangOmpss2NodesOmpv = callPackage ./pkgs/llvm-ompss2/default.nix { useNodes = true; useOpenmpV = true; };
     clangOmpss2Unwrapped = callPackage ./pkgs/llvm-ompss2/clang.nix { };
     cudainfo = prev.callPackage ./pkgs/cudainfo/default.nix { };
     #extrae = callPackage ./pkgs/extrae/default.nix { }; # Broken and outdated
@@ -49,16 +49,17 @@ let
     osumb = callPackage ./pkgs/osu/default.nix { };
     ovni = callPackage ./pkgs/ovni/default.nix { };
     ovniGit = final.ovni.override { useGit = true; };
+    papi = callPackage ./pkgs/papi/default.nix { papi = prev.papi; };
     paraverKernel = callPackage ./pkgs/paraver/kernel.nix { };
     prometheus-slurm-exporter = prev.callPackage ./pkgs/slurm-exporter/default.nix { };
     #pscom = callPackage ./pkgs/parastation/pscom.nix { }; # Unmaintaned
     #psmpi = callPackage ./pkgs/parastation/psmpi.nix { }; # Unmaintaned
     slurm = import ./pkgs/slurm/default.nix { slurm = prev.slurm; };
     sonar = callPackage ./pkgs/sonar/default.nix { };
-    stdenvClangOmpss2 = final.stdenv.override { cc = final.clangOmpss2; allowedRequisites = null; };
+    stdenvClangOmpss2 = final.stdenv.override { cc = final.buildPackages.clangOmpss2; allowedRequisites = null; };
-    stdenvClangOmpss2Nanos6 = final.stdenv.override { cc = final.clangOmpss2Nanos6; allowedRequisites = null; };
+    stdenvClangOmpss2Nanos6 = final.stdenv.override { cc = final.buildPackages.clangOmpss2Nanos6; allowedRequisites = null; };
-    stdenvClangOmpss2Nodes = final.stdenv.override { cc = final.clangOmpss2Nodes; allowedRequisites = null; };
+    stdenvClangOmpss2Nodes = final.stdenv.override { cc = final.buildPackages.clangOmpss2Nodes; allowedRequisites = null; };
-    stdenvClangOmpss2NodesOmpv = final.stdenv.override { cc = final.clangOmpss2NodesOmpv; allowedRequisites = null; };
+    stdenvClangOmpss2NodesOmpv = final.stdenv.override { cc = final.buildPackages.clangOmpss2NodesOmpv; allowedRequisites = null; };
     tagaspi = callPackage ./pkgs/tagaspi/default.nix { };
     tampi = callPackage ./pkgs/tampi/default.nix { };
     upc-qaire-exporter = prev.callPackage ./pkgs/upc-qaire-exporter/default.nix { };

pkgs/amd-uprof/default.nix

@@ -47,6 +47,7 @@ in
     inherit version;
     src = uprofSrc;
     dontStrip = true;
+    strictDeps = true;
     phases = [ "installPhase" "fixupPhase" ];
     nativeBuildInputs = [ autoPatchelfHook radare2 ];
     buildInputs = [

pkgs/amd-uprof/driver.nix

@@ -18,6 +18,7 @@ in stdenv.mkDerivation {
     set +x
   '';
   hardeningDisable = [ "pic" "format" ];
+  strictDeps = true;
   nativeBuildInputs = kernel.moduleBuildDependencies;
   patches = [ ./makefile.patch ./hrtimer.patch ./remove-wr-rdmsrq.patch ];
   makeFlags = [

pkgs/bench6/default.nix

@@ -59,6 +59,7 @@ stdenv.mkDerivation rec {
   ];
   hardeningDisable = [ "all" ];
   dontStrip = true;
+  strictDeps = true;
 
   meta = {
     homepage = "https://gitlab.pm.bsc.es/rarias/bench6";

pkgs/bigotes/default.nix

@@ -16,6 +16,8 @@ stdenv.mkDerivation {
   };
   nativeBuildInputs = [ cmake ];
 
+  strictDeps = true;
+
   meta = {
     homepage = "https://github.com/rodarima/bigotes";
     description = "Versatile benchmark tool";

pkgs/cudainfo/default.nix

@@ -10,11 +10,14 @@
 stdenv.mkDerivation (finalAttrs: {
   name = "cudainfo";
   src = ./.;
-  buildInputs = [
+  strictDeps = true;
+  nativeBuildInputs = [
     cudatoolkit # Required for nvcc
-    (lib.getOutput "static" cudaPackages.cuda_cudart) # Required for -lcudart_static
     autoAddDriverRunpath
   ];
+  buildInputs = [
+    (lib.getOutput "static" cudaPackages.cuda_cudart) # Required for -lcudart_static
+  ];
   installPhase = ''
     mkdir -p $out/bin
     cp -a cudainfo $out/bin
@@ -23,6 +26,7 @@ stdenv.mkDerivation (finalAttrs: {
     name = "cudainfo-test";
     requiredSystemFeatures = [ "cuda" ];
     dontBuild = true;
+    strictDeps = true;
     nativeCheckInputs = [
       finalAttrs.finalPackage # The cudainfo package from above
       strace # When it fails, it will show the trace

pkgs/extrae/default.nix

@@ -20,7 +20,7 @@
 #, python3Packages
 , installShellFiles
 , symlinkJoin
-, enablePapi ? stdenv.hostPlatform == stdenv.buildPlatform # Disabled when cross-compiling
+, enablePapi ? true
 }:
 
 let

pkgs/gpi-2/default.nix

@@ -33,6 +33,7 @@ stdenv.mkDerivation rec {
   };
 
   enableParallelBuilding = true;
+  strictDeps = true;
 
   patches = [ ./rdma-core.patch ./max-mem.patch ];
 

pkgs/intel-oneapi/2023.nix

@@ -128,6 +128,7 @@ let
 
     phases = [ "installPhase" "fixupPhase" ];
     dontStrip = true;
+    strictDeps = true;
     installPhase = ''
       mkdir -p $out/{bin,etc,lib,include}
       mkdir -p $out/share/man
@@ -179,6 +180,7 @@ let
     ];
     phases = [ "installPhase" "fixupPhase" ];
     dontStrip = true;
+    strictDeps = true;
 
     autoPatchelfIgnoreMissingDeps = [ "libhwloc.so.5" ];
 
@@ -222,6 +224,7 @@ let
     ];
     phases = [ "installPhase" "fixupPhase" ];
     dontStrip = true;
+    strictDeps = true;
 
     autoPatchelfIgnoreMissingDeps = [ "libsycl.so.6" ];
 
@@ -289,6 +292,7 @@ let
     phases = [ "installPhase" "fixupPhase" ];
 
     dontStrip = true;
+    strictDeps = true;
 
     installPhase = ''
       mkdir -p $out/{bin,lib,include}
@@ -377,6 +381,7 @@ let
     phases = [ "installPhase" "fixupPhase" ];
 
     dontStrip = true;
+    strictDeps = true;
 
     installPhase = ''
       mkdir -p $out/{bin,lib}

pkgs/llvm-ompss2/clang.nix

@@ -1,9 +1,9 @@
 {
-  llvmPackages_latest
+  stdenv
+, llvmPackages_latest
 , lib
 , fetchFromGitHub
 , cmake
-, bash
 , python3
 , perl
 , which
@@ -11,7 +11,6 @@
 , libffi
 , zlib
 , pkg-config
-, gcc # needed to set the rpath of libstdc++ for clang-tblgen
 , enableDebug ? false
 , useGit ? false
 , gitUrl ? "ssh://git@bscpm04.bsc.es/llvm-ompss/llvm-mono.git"
@@ -20,7 +19,10 @@
 }:
 
 let
-  stdenv = llvmPackages_latest.stdenv;
+  llvmPackages = llvmPackages_latest;
+  llvmStdenv = llvmPackages.stdenv;
+  # needed to set the rpath of libstdc++ for clang-tblgen
+  gcc = stdenv.cc;
 
   release = rec {
     version = "2025.11";
@@ -43,11 +45,12 @@ let
 
   source = if (useGit) then git else release;
 
-in stdenv.mkDerivation {
+in llvmStdenv.mkDerivation {
   pname = "clang-ompss2";
   inherit (source) src version;
 
   enableParallelBuilding = true;
+  strictDeps = true;
 
   passthru = {
     CC = "clang";
@@ -60,13 +63,12 @@ in stdenv.mkDerivation {
   };
 
   nativeBuildInputs = [
-    bash
     cmake
     elfutils
-    llvmPackages_latest.lld
+    llvmPackages.lld
+    perl
     pkg-config
     python3
-    perl
     which
     zlib
   ];
@@ -97,8 +99,13 @@ in stdenv.mkDerivation {
     cd build
     cmakeDir="../llvm"
     cmakeFlagsArray=(
-      "-DLLVM_HOST_TRIPLE=${stdenv.targetPlatform.config}"
+      "-DLLVM_HOST_TRIPLE=${llvmStdenv.targetPlatform.config}"
+    '' + (if "${llvmStdenv.targetPlatform.config}" == "riscv64-unknown-linux-gnu" then ''
+      "-DLLVM_DEFAULT_TARGET_TRIPLE=riscv64-unknown-linux-gnu"
+      "-DLLVM_TARGETS_TO_BUILD=RISCV"
+    '' else ''
       "-DLLVM_TARGETS_TO_BUILD=host"
+    '') + ''
       "-DLLVM_BUILD_LLVM_DYLIB=ON"
       "-DLLVM_LINK_LLVM_DYLIB=ON"
       # Required to run clang-ast-dump and clang-tblgen during build
@@ -107,7 +114,8 @@ in stdenv.mkDerivation {
       "-DCMAKE_CXX_FLAGS_DEBUG=-g -ggnu-pubnames"
       "-DCMAKE_EXE_LINKER_FLAGS_DEBUG=-Wl,--gdb-index"
       "-DLLVM_LIT_ARGS=-sv --xunit-xml-output=xunit.xml"
-      "-DLLVM_ENABLE_PROJECTS=clang;compiler-rt;lld"
+      "-DLLVM_ENABLE_PROJECTS=clang;lld"
+      "-DLLVM_ENABLE_RUNTIMES=compiler-rt"
       "-DLLVM_ENABLE_ASSERTIONS=ON"
       "-DLLVM_INSTALL_TOOLCHAIN_ONLY=ON"
       "-DCMAKE_INSTALL_BINDIR=bin"

pkgs/llvm-ompss2/default.nix

@@ -3,25 +3,42 @@
 , lib
 , gcc
 , clangOmpss2Unwrapped
-, openmp ? null
+
+, openmp
+, useOpenmp  ? false
+, openmpv
+, useOpenmpV ? false
+, nanos6
+, useNanos6 ? false
+, nodes
+, useNodes ? false
+
 , wrapCCWith
 , llvmPackages_latest
-, ompss2rt ? null
 }:
 
 with lib;
 
 let
-  usingNodesAndOmpv = (openmp.pname == "openmp-v" && ompss2rt.pname == "nodes");
+  getSplice = target: pkg: if pkg ? "__spliced" && pkg.__spliced ? target then pkg.__spliced."${target}" else pkg;
-  sameNosv = openmp.nosv == ompss2rt.nosv;
+  getSpliceTargetTarget = getSplice "targetTarget";
+  omp = if useOpenmp then openmp else if useOpenmpV then openmpv else null;
+  ompss2rtUnspliced = if useNanos6 then nanos6 else if useNodes then nodes else null;
+  ompss2rt = getSpliceTargetTarget ompss2rtUnspliced;
+  usingNodesAndOmpv = omp != null && ompss2rt != null && (omp.pname == "openmp-v" && ompss2rt.pname == "nodes");
+  sameNosvUnspliced = omp != null && ompss2rtUnspliced != null && omp.nosv == ompss2rtUnspliced.nosv;
+  sameNosvSpliced = (getSpliceTargetTarget omp.nosv) == ompss2rt.nosv;
 in
 
-assert assertMsg (usingNodesAndOmpv -> sameNosv) "OpenMP-V and NODES must share the same nOS-V";
+assert assertMsg (usingNodesAndOmpv -> sameNosvUnspliced) "OpenMP-V and NODES must share the same nOS-V before splice";
+assert assertMsg (usingNodesAndOmpv -> sameNosvSpliced) "OpenMP-V and NODES must share the same nOS-V after splice";
+assert assertMsg (useOpenmp -> !useOpenmpV) "Either OpenMP or OpenMP-V may be enabled, but not both";
+assert assertMsg (useNanos6 -> !useNodes) "Either Nanos6 or NODES may be enabled, but not both";
 
 let
   homevar = if ompss2rt.pname == "nanos6" then "NANOS6_HOME" else "NODES_HOME";
   rtname  = if ompss2rt.pname == "nanos6" then "libnanos6" else "libnodes";
-  ompname = if openmp.pname == "openmp-v" then  "libompv" else "libomp";
+  ompname = if omp.pname == "openmp-v" then  "libompv" else "libomp";
 
 
   # We need to replace the lld linker from bintools with our linker just built,
@@ -37,10 +54,10 @@ let
   inherit gcc;
   cc = clangOmpss2Unwrapped;
   gccVersion = with versions; let v = gcc.version; in concatStringsSep "." [(major v) (minor v) (patch v)];
-in wrapCCWith {
+in (wrapCCWith {
   inherit cc bintools;
   # extraPackages adds packages to depsTargetTargetPropagated
-  extraPackages = optional (openmp != null) openmp;
+  extraPackages = optional (omp != null) omp;
   extraBuildCommands = ''
     echo "-target ${targetConfig}" >> $out/nix-support/cc-cflags
     echo "-B${gcc.cc}/lib/gcc/${targetConfig}/${gccVersion}" >> $out/nix-support/cc-cflags
@@ -56,15 +73,15 @@ in wrapCCWith {
 
     echo "--gcc-toolchain=${gcc}" >> $out/nix-support/cc-cflags
 
-    wrap clang++  $wrapper $ccPath/clang++
+    wrap ${targetConfig}clang++  $wrapper $ccPath/clang++
+    wrap ${targetConfig}clang    $wrapper $ccPath/clang
 
-  '' + optionalString (openmp != null) ''
+  '' + optionalString (omp != null) ''
     echo "export OPENMP_RUNTIME=${ompname}" >> $out/nix-support/cc-wrapper-hook
   '' + optionalString (ompss2rt != null) ''
     echo "export OMPSS2_RUNTIME=${rtname}" >> $out/nix-support/cc-wrapper-hook
     echo "export ${homevar}=${ompss2rt}"   >> $out/nix-support/cc-wrapper-hook
   '' + optionalString (ompss2rt != null && ompss2rt.pname == "nodes") ''
-    echo "export NOSV_HOME=${ompss2rt.nosv}" >> $out/nix-support/cc-wrapper-hook
+    echo "export NOSV_HOME=${ompss2rt}" >> $out/nix-support/cc-wrapper-hook
   '';
-}
+}).overrideAttrs (prev: { passthru = (prev.passthru or {}) // { inherit ompss2rt; }; })
-

pkgs/llvm-ompss2/openmp.nix

@@ -39,7 +39,9 @@ stdenv.mkDerivation rec {
     perl
     pkg-config
     python3
-  ] ++ lib.optionals enableNosv [
+  ];
+
+  buildInputs = lib.optionals enableNosv [
     nosv
   ] ++ lib.optionals enableOvni [
     ovni
@@ -54,6 +56,7 @@ stdenv.mkDerivation rec {
   dontStrip = enableDebug;
 
   separateDebugInfo = true;
+  strictDeps = true;
 
   cmakeFlags = [
     "-DLIBOMP_OMPD_SUPPORT=OFF"
@@ -71,6 +74,28 @@ stdenv.mkDerivation rec {
     rm -f $out/libllvmrt/libomp.*
   '';
 
+  doInstallCheck = true;
+  # There are not cmake flags to force nOS-V, it enables it when found through
+  # pkg-config. If enableNosv is set, but we fail to find it at build time,
+  # the build will succeed but won't use nOS-V (libompv won't be created).
+  # This is a sanity check to ensure that after install we have the proper
+  # files.
+  installCheckPhase =
+    if enableNosv then
+      ''
+        test -f $out/lib/libompv.so
+        test -f $out/libllvmrt/libompv.so
+        test ! -f $out/lib/libomp.so
+        test ! -f $out/libllvmrt/libomp.so
+      ''
+    else
+      ''
+        test -f $out/lib/libomp.so
+        test -f $out/libllvmrt/libomp.so
+        test ! -f $out/lib/libompv.so
+        test ! -f $out/libllvmrt/libompv.so
+      '';
+
   passthru = {
     inherit nosv;
   };

pkgs/lmbench/default.nix

@@ -27,6 +27,7 @@ stdenv.mkDerivation rec {
   hardeningDisable = [ "all" ];
 
   enableParallelBuilding = false;
+  strictDeps = true;
 
   preBuild = ''
     makeFlagsArray+=(

pkgs/meteocat-exporter/default.nix

@@ -9,6 +9,7 @@ python3Packages.buildPythonApplication {
   src = ./.;
 
   doCheck = false;
+  strictDeps = true;
 
   build-system = with python3Packages; [
     setuptools

pkgs/mpich/default.nix

@@ -53,6 +53,7 @@ in mpich.overrideAttrs (old: {
   '';
 
   hardeningDisable = [ "all" ];
+  strictDeps = true;
 
   meta = old.meta // {
     maintainers = old.meta.maintainers ++ (with lib.maintainers.bsc; [ rarias ]);

pkgs/nanos6/default.nix

@@ -16,7 +16,7 @@
 , jemallocNanos6 ? null
 , cachelineBytes ? 64
 , enableGlibcxxDebug ? false
-, enablePapi ? stdenv.hostPlatform == stdenv.buildPlatform # Disabled when cross-compiling
+, enablePapi ? true
 , useGit ? false
 , gitUrl ? "ssh://git@bscpm04.bsc.es/nanos6/nanos6"
 , gitBranch ? "master"
@@ -80,7 +80,8 @@ in
       (optional enableGlibcxxDebug "CXXFLAGS=-D_GLIBCXX_DEBUG") ++
       # Most nanos6 api symbols are resolved at runtime, so prefer
       # ifunc by default
-      (optional isCross "--with-symbol-resolution=ifunc");
+      (optional isCross "--with-symbol-resolution=ifunc") ++
+      (optional enablePapi "--with-papi=${papi}");
 
     postConfigure = lib.optionalString (!enableDebug) ''
       # Disable debug
@@ -95,16 +96,14 @@ in
     dontStrip = enableDebug;
     separateDebugInfo = true;
 
+    strictDeps = true;
+
     nativeBuildInputs = [
       autoconf
       automake
       libtool
       pkg-config
-
+    ];
-      # TODO: papi_version is needed for configure:
-      # ./configure: line 27378: papi_version: command not found
-      # This probably breaks cross-compilation
-    ] ++ lib.optionals enablePapi [ papi ];
 
     buildInputs = [
       boost

pkgs/nixgen/default.nix

@@ -8,6 +8,7 @@ stdenv.mkDerivation {
   version = "0.0.1";
   src = ./nixgen;
   dontUnpack = true;
+  strictDeps = true;
   phases = [ "installPhase" ];
   installPhase = ''
     mkdir -p $out/bin

pkgs/nixtools/default.nix

@@ -16,6 +16,7 @@ stdenv.mkDerivation rec {
   makeFlags = [ "DESTDIR=$(out)" ];
   preBuild = "env";
   dontPatchShebangs = true;
+  strictDeps = true;
 
   meta = {
     homepage = "https://gitlab.pm.bsc.es/rarias/nixtools";

pkgs/nodes/default.nix

@@ -48,6 +48,7 @@ in
     enableParallelBuilding = true;
     dontStrip = true;
     separateDebugInfo = true;
+    strictDeps = true;
 
     configureFlags = [
       "--with-nosv=${nosv}"

pkgs/nosv/default.nix

@@ -7,7 +7,7 @@
 , numactl
 , hwloc
 , papi
-, enablePapi ? stdenv.hostPlatform == stdenv.buildPlatform # Disabled when cross-compiling
+, enablePapi ? true
 , cacheline ? 64 # bits
 , ovni ? null
 , useGit ? false
@@ -40,16 +40,17 @@ let
 
   source = if (useGit) then git else release;
 in
-  stdenv.mkDerivation rec {
+  stdenv.mkDerivation {
     pname = "nosv";
     inherit (source) src version;
     hardeningDisable = [ "all" ];
     dontStrip = true;
     separateDebugInfo = true;
+    strictDeps = true;
     configureFlags = [
       "--with-ovni=${ovni}"
       "CACHELINE_WIDTH=${toString cacheline}"
-    ];
+    ] ++ lib.optionals enablePapi [ "--with-papi=${papi}" ];
     nativeBuildInputs = [
       autoreconfHook
       pkg-config
@@ -59,6 +60,7 @@ in
       hwloc
       ovni
     ] ++ lib.optionals enablePapi [ papi ];
+    patches = [ ./fix-papi.patch ];
 
     meta = {
       homepage = "https://gitlab.bsc.es/nos-v/nos-v";

pkgs/nosv/fix-papi.patch

@@ -0,0 +1,136 @@
+Commit ID: c09633f172ce4075e0a05a33f6dcbe8e03e1202a
+Change ID: onmwypnnrysktutwsvotqovzponvwrxs
+Bookmarks: fix/papi fix/papi@git fix/papi@origin
+Author   : Aleix Boné <aleix.boneribo@bsc.es> (2025-12-10 11:14:14)
+Committer: Aleix Boné <aleix.boneribo@bsc.es> (2025-12-12 12:56:48)
+
+    Improve PAPI m4 module for cross compilation
+
+diff --git a/m4/papi.m4 b/m4/papi.m4
+index de90584870..8398f856f5 100644
+--- a/m4/papi.m4
++++ b/m4/papi.m4
+@@ -1,6 +1,6 @@
+ #	This file is part of Nanos6 and is licensed under the terms contained in the COPYING file.
+ #
+-#	Copyright (C) 2021-2022 Barcelona Supercomputing Center (BSC)
++#	Copyright (C) 2021-2025 Barcelona Supercomputing Center (BSC)
+ 
+ AC_DEFUN([AC_CHECK_PAPI],
+ 	[
+@@ -8,34 +8,38 @@
+ 			[papi],
+ 			[AS_HELP_STRING([--with-papi=prefix], [specify the installation prefix of PAPI])],
+ 			[ ac_cv_use_papi_prefix=$withval ],
+-			[ ac_cv_use_papi_prefix="" ]
++			[ ac_cv_use_papi_prefix="check" ]
+ 		)
+ 
+ 		if test x"${ac_cv_use_papi_prefix}" = x"no"; then
+ 			AC_MSG_CHECKING([the PAPI installation prefix])
+ 			AC_MSG_RESULT([${ac_cv_use_papi_prefix}])
+ 			ac_use_papi=no
+-		elif test x"${ac_cv_use_papi_prefix}" != x"" ; then
+-			AC_MSG_CHECKING([the PAPI installation prefix])
+-			AC_MSG_RESULT([${ac_cv_use_papi_prefix}])
+-			papi_LIBS="-L${ac_cv_use_papi_prefix}/lib -lpapi -Wl,-rpath,${ac_cv_use_papi_prefix}/lib"
+-			papi_CFLAGS="-I$ac_cv_use_papi_prefix/include"
+-			ac_use_papi=yes
+-		else
++		elif test x"${ac_cv_use_papi_prefix}" = x""; then
++			AC_MSG_RESULT([invalid prefix])
++			AC_MSG_ERROR([papi prefix specified but empty])
++		elif test x"${ac_cv_use_papi_prefix}" = x"yes" -o x"${ac_cv_use_papi_prefix}" = x"check"; then
+ 			PKG_CHECK_MODULES(
+ 				[papi],
+-				[papi],
++				[papi >= 5.6.0],
+ 				[
+ 					AC_MSG_CHECKING([the PAPI installation prefix])
+ 					AC_MSG_RESULT([retrieved from pkg-config])
+ 					papi_CFLAGS="${papi_CFLAGS}"
+ 					ac_use_papi=yes
++					ac_papi_version_correct=yes
+ 				], [
+ 					AC_MSG_CHECKING([the PAPI installation prefix])
+ 					AC_MSG_RESULT([not available])
+ 					ac_use_papi=no
+ 				]
+ 			)
++		else
++			AC_MSG_CHECKING([the PAPI installation prefix])
++			AC_MSG_RESULT([${ac_cv_use_papi_prefix}])
++			papi_LIBS="-L${ac_cv_use_papi_prefix}/lib -lpapi -Wl,-rpath,${ac_cv_use_papi_prefix}/lib"
++			papi_CFLAGS="-I$ac_cv_use_papi_prefix/include"
++			ac_use_papi=yes
+ 		fi
+ 
+ 		if test x"${ac_use_papi}" = x"yes" ; then
+@@ -53,10 +57,10 @@
+ 					ac_use_papi=yes
+ 				],
+ 				[
+-					if test x"${ac_cv_use_papi_prefix}" != x"" ; then
+-						AC_MSG_ERROR([PAPI cannot be found.])
++					if test x"${ac_cv_use_papi_prefix}" = x"yes" ; then
++						AC_MSG_ERROR([PAPI >= 5.6.0 cannot be found.])
+ 					else
+-						AC_MSG_WARN([PAPI cannot be found.])
++						AC_MSG_WARN([PAPI >= 5.6.0 not available.])
+ 					fi
+ 					ac_use_papi=no
+ 				]
+@@ -64,30 +68,38 @@
+ 
+ 			CFLAGS="${ac_save_CFLAGS}"
+ 			LIBS="${ac_save_LIBS}"
++		elif test x"${ac_cv_use_papi_prefix}" = x"yes" ; then
++			AC_MSG_ERROR([PAPI >= 5.6.0 cannot be found.])
+ 		fi
+ 
+-		if test x"${ac_use_papi}" = x"yes" ; then
+-			if test x"${ac_cv_use_papi_prefix}" != x"" ; then
++		if test x"${ac_use_papi}" = x"yes" -a x"${ac_papi_version_correct}" != x"yes" ; then
++			if test x"${ac_cv_use_papi_prefix}" != x"yes" -a x"${ac_cv_use_papi_prefix}" != x"check" ; then
+ 				papiBinary=${ac_cv_use_papi_prefix}/bin/papi_version
+ 			else
+ 				papiBinary=papi_version
+ 			fi
+-			papiVersion=`$papiBinary | sed 's/[[^0-9.]]*\([[0-9.]]*\).*/\1/'`
+ 
+-			AX_COMPARE_VERSION(
+-				[[${papiVersion}]],
+-				[[ge]],
+-				[[5.6.0]],
+-				[[ac_papi_version_correct=yes]],
+-				[[ac_papi_version_correct=no]]
+-			)
+ 
+-			if test x"${ac_papi_version_correct}" != x"yes" ; then
+-				AC_MSG_ERROR([PAPI version must be >= 5.6.0.])
+-				ac_use_papi=no
++			if test x"$cross_compiling" = x"yes" ; then
++				AC_MSG_WARN([Cross-compiling detected, skipping PAPI version check])
+ 			else
+-				AC_MSG_CHECKING([if the PAPI version >= 5.6.0.])
+-				AC_MSG_RESULT([${ac_papi_version_correct}])
++				papiVersion=`$papiBinary | sed 's/[[^0-9.]]*\([[0-9.]]*\).*/\1/'`
++
++				AX_COMPARE_VERSION(
++					[[${papiVersion}]],
++					[[ge]],
++					[[5.6.0]],
++					[[ac_papi_version_correct=yes]],
++					[[ac_papi_version_correct=no]]
++				)
++
++				if test x"${ac_papi_version_correct}" != x"yes" ; then
++					AC_MSG_ERROR([PAPI version must be >= 5.6.0.])
++					ac_use_papi=no
++				else
++					AC_MSG_CHECKING([if the PAPI version >= 5.6.0.])
++					AC_MSG_RESULT([${ac_papi_version_correct}])
++				fi
+ 			fi
+ 		fi
+ 

pkgs/osu/default.nix

@@ -24,6 +24,7 @@ stdenv.mkDerivation rec {
 
   doCheck = true;
   enableParallelBuilding = true;
+  strictDeps = true;
   nativeBuildInputs = [ mpiAll ];
   buildInputs = [ mpiAll ];
   hardeningDisable = [ "all" ];

pkgs/ovni/default.nix

@@ -40,6 +40,7 @@ in
     inherit (source) src version;
     dontStrip = true;
     separateDebugInfo = true;
+    strictDeps = true;
     postPatch = ''
       patchShebangs --build test/
     '';

pkgs/papi/default.nix

@@ -0,0 +1,22 @@
+{
+  stdenv,
+  papi,
+}:
+
+if stdenv.hostPlatform == stdenv.buildPlatform then
+  papi
+else
+  papi.overrideAttrs (old: {
+    configureFlags = (old.configureFlags or [ ]) ++ [
+      "--enable-perf_event_uncore=no"
+      "--with-sysdetect=no"
+      "--with-ffsll"
+      "--with-tls=__thread"
+      "--with-virtualtimer=clock_thread_cputime_id"
+      "--with-walltimer=clock_realtime"
+      "--with-perf-events"
+      "--with-CPU=${stdenv.hostPlatform.uname.processor}"
+      "--with-arch=${stdenv.hostPlatform.uname.processor}"
+    ];
+    patches = (old.patches or [ ]) ++ [ ./fix-ar-cross.patch ];
+  })

pkgs/papi/fix-ar-cross.patch

@@ -0,0 +1,19 @@
+diff --git a/sde_lib/Makefile b/sde_lib/Makefile
+index 8518f92..90a9953 100644
+--- a/sde_lib/Makefile
++++ b/sde_lib/Makefile
+@@ -1,4 +1,5 @@
+ CC ?= gcc
++AR ?= ar
+ SDE_INC = -I. -I..
+ SDE_LD = -ldl -pthread
+ CFLAGS += -Wextra -Wall -O2
+@@ -18,7 +19,7 @@ dynamic: $(DOBJS)
+ 	rm -f *_d.o
+ 
+ static: $(SOBJS)
+-	ar rs libsde.a $(SOBJS)
++	$(AR) rs libsde.a $(SOBJS)
+ 	rm -f *_s.o
+ 
+ clean:

pkgs/paraver/default.nix

@@ -47,6 +47,7 @@ stdenv.mkDerivation rec {
 
   dontStrip = true;
   enableParallelBuilding = true;
+  strictDeps = true;
 
   preConfigure = ''
     export CFLAGS="-O3"

pkgs/paraver/kernel.nix

@@ -34,6 +34,7 @@ stdenv.mkDerivation rec {
   enableParallelBuilding = true;
 
   dontStrip = true;
+  strictDeps = true;
 
   preConfigure = ''
     export CFLAGS="-O3 -DPARALLEL_ENABLED"

pkgs/slurm-exporter/default.nix

@@ -13,6 +13,7 @@ buildGoModule rec {
 
   vendorHash = "sha256-A1dd9T9SIEHDCiVT2UwV6T02BSLh9ej6LC/2l54hgwI=";
   doCheck = false;
+  strictDeps = true;
 
   meta = with lib; {
     description = "Prometheus SLURM Exporter";

pkgs/sonar/default.nix

@@ -18,6 +18,7 @@ stdenv.mkDerivation rec {
   };
   hardeningDisable = [ "all" ];
   dontStrip = true;
+  strictDeps = true;
   configureFlags = [ "--with-ovni=${ovni}" ];
 
   nativeBuildInputs = [

pkgs/tagaspi/default.nix

@@ -17,6 +17,7 @@ stdenv.mkDerivation rec {
   pname = "tagaspi";
   enableParallelBuilding = true;
   separateDebugInfo = true;
+  strictDeps = true;
 
   version = "2.0";
   src = fetchFromGitHub {

pkgs/tampi/default.nix

@@ -45,6 +45,7 @@ in stdenv.mkDerivation {
   inherit (source) src version;
   enableParallelBuilding = true;
   separateDebugInfo = true;
+  strictDeps = true;
 
   nativeBuildInputs = [
     autoconf

pkgs/upc-qaire-exporter/default.nix

@@ -9,6 +9,7 @@ python3Packages.buildPythonApplication {
   src = ./.;
 
   doCheck = false;
+  strictDeps = true;
 
   build-system = with python3Packages; [
     setuptools

test/compilers/clang-openmp-ld.nix

@@ -23,9 +23,6 @@ in stdenv.mkDerivation {
   dontUnpack = true;
   dontConfigure = true;
 
-  # nOS-V requires access to /sys/devices to request NUMA information
-  requiredSystemFeatures = [ "sys-devices" ];
-
   buildInputs = [ openmp ];
 
   buildPhase = ''