{ lib, config, pkgs, ... }: { imports = [ ../common/base.nix ../common/xeon/console.nix ../module/emulation.nix ../module/nvidia.nix ]; # Select the this using the ID to avoid mismatches boot.loader.grub.device = "/dev/disk/by-id/wwn-0x500a07514b0c1103"; # No swap, there is plenty of RAM swapDevices = lib.mkForce []; boot.initrd.availableKernelModules = [ "xhci_pci" "ahci" "nvme" "usbhid" "usb_storage" "sd_mod" ]; boot.kernelModules = [ "kvm-amd" "amd_uncore" ]; hardware.cpu.amd.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware; hardware.cpu.intel.updateMicrocode = lib.mkForce false; # Use performance for benchmarks powerManagement.cpuFreqGovernor = "performance"; # Disable NUMA balancing boot.kernel.sysctl."kernel.numa_balancing" = 0; # Expose kernel addresses boot.kernel.sysctl."kernel.kptr_restrict" = 0; services.openssh.settings.X11Forwarding = true; networking = { timeServers = [ "ntp1.upc.edu" "ntp2.upc.edu" ]; hostName = "fox"; # UPC network (may change over time, use DHCP) # Public IP configuration: # - Hostname: fox.ac.upc.edu # - IP: 147.83.30.141 # - Gateway: 147.83.30.130 # - NetMask: 255.255.255.192 # Private IP configuration for BMC: # - Hostname: fox-ipmi.ac.upc.edu # - IP: 147.83.35.27 # - Gateway: 147.83.35.2 # - NetMask: 255.255.255.0 interfaces.enp1s0f0np0.useDHCP = true; }; # Use hut for cache nix.settings = { extra-substituters = [ "https://jungle.bsc.es/cache" ]; extra-trusted-public-keys = [ "jungle.bsc.es:pEc7MlAT0HEwLQYPtpkPLwRsGf80ZI26aj29zMw/HH0=" ]; }; # Recommended for new graphics cards hardware.nvidia.open = true; # Mount NVME disks fileSystems."/nvme0" = { device = "/dev/disk/by-label/nvme0"; fsType = "ext4"; }; fileSystems."/nvme1" = { device = "/dev/disk/by-label/nvme1"; fsType = "ext4"; }; # Make a /nvme{0,1}/$USER directory for each user. systemd.services.create-nvme-dirs = let # Take only normal users in fox users = lib.filterAttrs (_: v: v.isNormalUser) config.users.users; commands = lib.concatLists (lib.mapAttrsToList (_: user: [ "install -d -o ${user.name} -g ${user.group} -m 0755 /nvme{0,1}/${user.name}" ]) users); script = pkgs.writeShellScript "create-nvme-dirs.sh" (lib.concatLines commands); in { enable = true; wants = [ "local-fs.target" ]; after = [ "local-fs.target" ]; wantedBy = [ "multi-user.target" ]; serviceConfig.ExecStart = script; }; }