These sensors are part of their air quality measurements, which just
happen to be very close to our server room.
Reviewed-by: Aleix Boné <abonerib@bsc.es>
Allows us to track ambient temperature changes and estimate the
temperature delta between the server room and exterior temperature.
We should be able to predict when we would need to stop the machines due
to excesive temperature as summer approaches.
Reviewed-by: Aleix Boné <abonerib@bsc.es>
Allows us to see which derivations are being built in realtime. It is a
bit of a hack, but it seems to work. We simply look at the environment
of the child processes of nix-daemon (usually bash) and then look for
the $name variable which should hold the current derivation being
built. Needs root to be able to read the environ file of the different
nix-daemon processes as they are owned by the nixbld* users.
See: https://discourse.nixos.org/t/query-ongoing-builds/23486
Reviewed-by: Aleix Boné <abonerib@bsc.es>
From the documentation of keep-outputs, setting it to true would prevent
the GC from removing build time dependencies:
If true, the garbage collector will keep the outputs of non-garbage
derivations. If false (default), outputs will be deleted unless they are
GC roots themselves (or reachable from other roots).
In general, outputs must be registered as roots separately. However,
even if the output of a derivation is registered as a root, the
collector will still delete store paths that are used only at build time
(e.g., the C compiler, or source tarballs downloaded from the network).
To prevent it from doing so, set this option to true.
See: https://nix.dev/manual/nix/2.24/command-ref/conf-file.html#conf-keep-outputs
Reviewed-by: Aleix Roca Nonell <aleix.rocanonell@bsc.es>
Now that we have more space, we can extend the retention time to 5 years
to hold the monitoring metrics. For a year we have:
# du -sh /var/lib/prometheus2
13G /var/lib/prometheus2
So we can expect it to increase to about 65 GiB. In the future we may
want to reduce some adquisition frequency.
Reviewed-by: Aleix Boné <abonerib@bsc.es>
Allows fetching repositories from hut and other machines in jungle
without the need to do any extra configuration.
Reviewed-by: Aleix Boné <abonerib@bsc.es>
For owl1 and owl2 directly connect to hut via LAN with HTTP, but for
raccoon pass via the proxy using jungle.bsc.es with HTTPS. There is no
risk of tampering as packages are signed.
Reviewed-by: Rodrigo Arias Mallo <rodrigo.arias@bsc.es>
Prevents the "iptables: Chain already exists." error by making sure that
we don't leave any chain on start. The ideal solution is to use
iptables-restore instead, which will do the right job. But this needs to
be changed in NixOS entirely.
Reviewed-by: Aleix Boné <abonerib@bsc.es>
Needed for local hosts to contact the nix cache via HTTP directly.
We also allow the incoming traffic on port 80.
Reviewed-by: Aleix Boné <abonerib@bsc.es>
It uses docker based on alpine and the host nix store, so we can perform
builds but isolate them from the system.
Reviewed-by: Aleix Boné <abonerib@bsc.es>
Ensure that all hut users have a paste directory in /ceph/p owned by
themselves. We need to wait for the ceph mount point to create them, so
we use a systemd service that waits for the remote-fs.target.
Reviewed-by: Aleix Boné <abonerib@bsc.es>
Instead of using multiple tunels to forward all our services to the VM
that serves jungle.bsc.es, just use nginx to redirect the traffic from
hut. This allows adding custom rules for paths that are not posible
otherwise.
Reviewed-by: Aleix Boné <abonerib@bsc.es>
Prevents starting the garbage collector before the remote FS are
mounted, in particular /home. Otherwise, all the gcroots which have
symlinks in /home will be considered stale and they will be removed.
See: rarias/jungle#79
Reviewed-by: Aleix Roca Nonell <aleix.rocanonell@bsc.es>
Apparently the ttyS0 console doesn't exist but ttyS1 does:
raccoon% sudo stty -F /dev/ttyS0
stty: /dev/ttyS0: Input/output error
raccoon% sudo stty -F /dev/ttyS1
speed 9600 baud; line = 0;
-brkint -imaxbel
The dmesg line agrees:
00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
The console configuration is then moved from base to xeon to allow
changing it for the raccoon machine.
Reviewed-by: Aleix Boné <abonerib@bsc.es>
They have been removed from NixOS. The "hardware.opengl" group is now
renamed to "hardware.graphics".
See: 98cef4c273
Reviewed-by: Aleix Boné <abonerib@bsc.es>
The shutdown timer will fire at slightly different times for the
different nodes, so we slowly decrease the power consumption.
Reviewed-by: Aleix Boné <abonerib@bsc.es>
Initially we planned to run jobs in those nodes by sharing the same nix
store from hut. However, these nodes are now used to build packages
which are not available in hut. Users also ssh to the nodes, which
doesn't mount the hut store, so it doesn't make much sense to keep
mounting it.
Reviewed-by: Aleix Boné <abonerib@bsc.es>
