Make lib imports in overlay explicit

Set strictDeps=true on our top level packages
2025-09-29 12:54:22 +02:00 · 2025-09-29 12:54:22 +02:00
154 changed files with 275 additions and 6005 deletions
--- a/.gitea/workflows/ci.yaml
+++ b/.gitea/workflows/ci.yaml
@ -1,15 +0,0 @@
-name: CI
-on:
-  push:
-    branches:
-      - master
-  pull_request:
-    branches:
-      - master
-
-jobs:
-  build:all:
-    runs-on: native
-    steps:
-      - uses: https://gitea.com/ScMi1/checkout@v1.4
-      - run: nix build -L --no-link --print-out-paths .#bsc-ci.all
--- a/.gitignore
+++ b/.gitignore
@ -1,3 +1,3 @@
+source
+result
 **.swp
-/result
-/misc
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@ -3,4 +3,4 @@ build:bsc-ci.all:
  tags:
    - nix
  script:
-    - nix build -L --no-link --print-out-paths .#bsc-ci.all
+    - nix build -L "jungle#bsc-ci.all" --override-input bscpkgs . -v --show-trace
--- a/2
+++ b/2
@ -1,4 +1,4 @@
-Copyright (c) 2020-2025 Barcelona Supercomputing Center
+Copyright (c) 2020-2021 Barcelona Supercomputing Center
 Copyright (c) 2003-2020 Eelco Dolstra and the Nixpkgs/NixOS contributors

 Permission is hereby granted, free of charge, to any person obtaining
--- a/README.md
+++ b/README.md
@ -1,9 +1 @@
-# Jungle
-
-This repository provides two components that can be used independently:
-
- A Nix overlay with packages used at BSC (formerly known as bscpkgs). Access
-  them directly with `nix shell .#<pkgname>`.
-
- NixOS configurations for jungle machines. Use `nixos-rebuild switch --flake .`
-  to upgrade the current machine.
+Nix overlay with BSC packages.
--- a/doc/install.md
+++ b/doc/install.md
@ -1,176 +0,0 @@
-# Installing NixOS in a new node
-
-This article shows the steps to install NixOS in a node following the
-configuration of the repo.
-
-## Enable the serial console
-
-By default, the nodes have the serial console disabled in the GRUB and also boot
-without the serial enabled.
-
-To enable the serial console in the GRUB, set in /etc/default/grub the following
-lines:
-
-```
-GRUB_TERMINAL="console serial"
-GRUB_SERIAL_COMMAND="serial --speed=115200 --unit=0 --word=8 --parity=no --stop=1"
-```
-
-To boot Linux with the serial enabled, so you can see the boot log and login via
-serial set:
-
-```
-GRUB_CMDLINE_LINUX="console=ttyS0,115200n8 console=tty0"
-```
-
-Then update the grub config:
-
-```
-# grub2-mkconfig -o /boot/grub2/grub.cfg
-```
-
-And reboot.
-
-## Prepare the disk
-
-Create a main partition and label it `nixos` following [the manual][1].
-
-[1]: https://nixos.org/manual/nixos/stable/index.html#sec-installation-manual-partitioning.
-
-```
-# disk=/dev/sdX
-# parted $disk -- mklabel msdos
-# parted $disk -- mkpart primary 1MB -8GB
-# parted $disk -- mkpart primary linux-swap -8GB 100%
-# parted $disk -- set 1 boot on
-```
-
-Then create an etx4 filesystem, labeled `nixos` where the system will be
-installed. **Ensure that no other partition has the same label.**
-
-```
-# mkfs.ext4 -L nixos "${disk}1"
-# mkswap -L swap "${disk}2"
-# mount ${disk}1 /mnt
-# lsblk -f $disk
-NAME   FSTYPE LABEL UUID                                 MOUNTPOINT
-sdX
-`-sdX1 ext4   nixos 10d73b75-809c-4fa3-b99d-4fab2f0d0d8e /mnt
-```
-
-## Prepare nix and nixos-install
-
-Mount the nix store from the hut node in read-only /nix.
-
-```
-# mkdir /nix
-# mount -o ro hut:/nix /nix
-```
-
-Get the nix binary and nixos-install tool from hut:
-
-```
-# ssh hut 'readlink -f $(which nix)'
-/nix/store/0sxbaj71c4c4n43qhdxm31f56gjalksw-nix-2.13.3/bin/nix
-# ssh hut 'readlink -f $(which nixos-install)'
-/nix/store/9yq8ps06ysr2pfiwiij39ny56yk3pdcs-nixos-install/bin/nixos-install
-```
-
-And add them to the PATH:
-
-```
-# export PATH=$PATH:/nix/store/0sxbaj71c4c4n43qhdxm31f56gjalksw-nix-2.13.3/bin
-# export PATH=$PATH:/nix/store/9yq8ps06ysr2pfiwiij39ny56yk3pdcs-nixos-install/bin/
-# nix --version
-nix (Nix) 2.13.3
-```
-
-## Adapt owl configuration
-
-Clone owl repo:
-
-```
-$ git clone git@bscpm03.bsc.es:rarias/owl.git
-$ cd owl
-```
-
-Edit the configuration to your needs.
-
-## Install from another Linux OS
-
-Install nixOS into the storage drive.
-
-```
-# nixos-install --flake --root /mnt .#xeon0X
-```
-
-At this point, the nixOS grub has been installed into the nixos device, which
-is not the default boot device. To keep both the old Linux and NixOS grubs, add
-an entry into the old Linux grub to jump into the new grub.
-
-```
-# echo "
-
-menuentry 'NixOS' {
-    insmod chain
-    search --no-floppy --label nixos --set root
-    configfile /boot/grub/grub.cfg
-} " >> /etc/grub.d/40_custom
-```
-
-Rebuild grub config.
-
-```
-# grub2-mkconfig -o /boot/grub/grub.cfg
-```
-
-To boot into NixOS manually, reboot and select NixOS in the grub menu to boot
-into NixOS.
-
-To temporarily boot into NixOS only on the next reboot run:
-
-```
-# grub2-reboot 'NixOS'
-```
-
-To permanently boot into NixOS as the default boot OS, edit `/etc/default/grub/`:
-
-```
-GRUB_DEFAULT='NixOS'
-```
-
-And update grub.
-
-```
-# grub2-mkconfig -o /boot/grub/grub.cfg
-```
-
-## Build the nixos kexec image
-
-```
-# nix build .#nixosConfigurations.xeon02.config.system.build.kexecTree -v
-```
-
-## Chain NixOS in same disk with other systems
-
-To install NixOS on a partition along another system which controls the GRUB,
-first disable the grub device, so the GRUB is not installed in the disk by
-NixOS (only the /boot files will be generated):
-
-```
-boot.loader.grub.device = "nodev";
-```
-
-Then add the following entry to the old GRUB configuration:
-
-```
-menuentry 'NixOS' {
-        insmod chain
-        search --no-floppy --label nixos --set root
-        configfile /boot/grub/grub.cfg
-}
-```
-
-The partition with NixOS must have the label "nixos" for it to be found. New
-system configuration entries will be stored in the GRUB configuration managed
-by NixOS, so there is no need to change the old GRUB settings.
--- a/doc/trim.sh
+++ b/doc/trim.sh
@ -1,46 +0,0 @@
-#!/bin/sh
-
-# Trims the jungle repository by moving the website to its own repository and
-# removing it from jungle. It also removes big pdf files and kernel
-# configurations so the jungle repository is small.
-
-set -e
-
-if [ -e oldjungle -o -e newjungle -o -e website ]; then
-  echo "remove oldjungle/, newjungle/ and website/ first"
-  exit 1
-fi
-
-# Clone the old jungle repo
-git clone gitea@tent:rarias/jungle.git oldjungle
-
-# First split the website into a new repository
-mkdir website && git -C website init -b master
-git-filter-repo \
-  --path web \
-  --subdirectory-filter web \
-  --source oldjungle \
-  --target website
-
-# Then remove the website, pdf files and big kernel configs
-mkdir newjungle && git -C newjungle init -b master
-git-filter-repo \
-  --invert-paths \
-  --path web \
-  --path-glob 'doc*.pdf' \
-  --path-glob '**/kernel/configs/lockdep' \
-  --path-glob '**/kernel/configs/defconfig' \
-  --source oldjungle \
-  --target newjungle
-
-set -x
-
-du -sh oldjungle newjungle website
-#  57M  oldjungle
-# 2,3M  newjungle
-# 6,4M  website
-
-du -sh --exclude=.git oldjungle newjungle website
-#  30M  oldjungle
-# 700K  newjungle
-# 3,5M  website
--- a/flake.lock
+++ b/flake.lock
@ -1,107 +1,22 @@
 {
  "nodes": {
-    "agenix": {
-      "inputs": {
-        "darwin": "darwin",
-        "home-manager": "home-manager",
-        "nixpkgs": [
-          "nixpkgs"
-        ],
-        "systems": "systems"
-      },
-      "locked": {
-        "lastModified": 1750173260,
-        "narHash": "sha256-9P1FziAwl5+3edkfFcr5HeGtQUtrSdk/MksX39GieoA=",
-        "owner": "ryantm",
-        "repo": "agenix",
-        "rev": "531beac616433bac6f9e2a19feb8e99a22a66baf",
-        "type": "github"
-      },
-      "original": {
-        "owner": "ryantm",
-        "repo": "agenix",
-        "type": "github"
-      }
-    },
-    "darwin": {
-      "inputs": {
-        "nixpkgs": [
-          "agenix",
-          "nixpkgs"
-        ]
-      },
-      "locked": {
-        "lastModified": 1744478979,
-        "narHash": "sha256-dyN+teG9G82G+m+PX/aSAagkC+vUv0SgUw3XkPhQodQ=",
-        "owner": "lnl7",
-        "repo": "nix-darwin",
-        "rev": "43975d782b418ebf4969e9ccba82466728c2851b",
-        "type": "github"
-      },
-      "original": {
-        "owner": "lnl7",
-        "ref": "master",
-        "repo": "nix-darwin",
-        "type": "github"
-      }
-    },
-    "home-manager": {
-      "inputs": {
-        "nixpkgs": [
-          "agenix",
-          "nixpkgs"
-        ]
-      },
-      "locked": {
-        "lastModified": 1745494811,
-        "narHash": "sha256-YZCh2o9Ua1n9uCvrvi5pRxtuVNml8X2a03qIFfRKpFs=",
-        "owner": "nix-community",
-        "repo": "home-manager",
-        "rev": "abfad3d2958c9e6300a883bd443512c55dfeb1be",
-        "type": "github"
-      },
-      "original": {
-        "owner": "nix-community",
-        "repo": "home-manager",
-        "type": "github"
-      }
-    },
    "nixpkgs": {
      "locked": {
        "lastModified": 1752436162,
        "narHash": "sha256-Kt1UIPi7kZqkSc5HVj6UY5YLHHEzPBkgpNUByuyxtlw=",
-        "owner": "NixOS",
-        "repo": "nixpkgs",
+        "path": "/nix/store/zk8v61cpk1wprp9ld5ayc1g5fq4pdkwv-source",
        "rev": "dfcd5b901dbab46c9c6e80b265648481aafb01f8",
-        "type": "github"
+        "type": "path"
      },
      "original": {
-        "owner": "NixOS",
-        "ref": "nixos-25.05",
-        "repo": "nixpkgs",
-        "type": "github"
+        "id": "nixpkgs",
+        "type": "indirect"
      }
    },
    "root": {
      "inputs": {
-        "agenix": "agenix",
        "nixpkgs": "nixpkgs"
      }
-    },
-    "systems": {
-      "locked": {
-        "lastModified": 1681028828,
-        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
-        "owner": "nix-systems",
-        "repo": "default",
-        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
-        "type": "github"
-      },
-      "original": {
-        "owner": "nix-systems",
-        "repo": "default",
-        "type": "github"
-      }
    }
  },
  "root": "root",
--- a/flake.nix
+++ b/flake.nix
@ -1,52 +1,26 @@
 {
-  inputs = {
-    nixpkgs.url = "github:NixOS/nixpkgs/nixos-25.05";
-    agenix.url = "github:ryantm/agenix";
-    agenix.inputs.nixpkgs.follows = "nixpkgs";
-  };
+  inputs.nixpkgs.url = "nixpkgs";

-  outputs = { self, nixpkgs, agenix, ... }:
-let
-  mkConf = name: nixpkgs.lib.nixosSystem {
-    system = "x86_64-linux";
-    specialArgs = { inherit nixpkgs agenix; theFlake = self; };
-    modules = [ "${self.outPath}/m/${name}/configuration.nix" ];
-  };
-  # For now we only support x86
-  system = "x86_64-linux";
-  pkgs = import nixpkgs {
-    inherit system;
-    overlays = [ self.overlays.default ];
-    config.allowUnfree = true;
-  };
-in
-  {
-    nixosConfigurations = {
-      hut     = mkConf "hut";
-      tent    = mkConf "tent";
-      owl1    = mkConf "owl1";
-      owl2    = mkConf "owl2";
-      eudy    = mkConf "eudy";
-      koro    = mkConf "koro";
-      bay     = mkConf "bay";
-      lake2   = mkConf "lake2";
-      raccoon = mkConf "raccoon";
-      fox     = mkConf "fox";
-      apex    = mkConf "apex";
-      weasel  = mkConf "weasel";
+  outputs = { self, nixpkgs, ...}:
+    let
+      # For now we only support x86
+      system = "x86_64-linux";
+      pkgs = import nixpkgs {
+        inherit system;
+        overlays = [ self.overlays.default ];
+      };
+    in
+    {
+      bscOverlay = import ./overlay.nix;
+      overlays.default = self.bscOverlay;
+      # full nixpkgs with our overlay applied
+      legacyPackages.${system} = pkgs;
+
+      hydraJobs = {
+        inherit (self.legacyPackages.${system}.bsc-ci) test pkgs;
+      };
+
+      # propagate nixpkgs lib, so we can do bscpkgs.lib
+      inherit (nixpkgs) lib;
    };
-
-    bscOverlay = import ./overlay.nix;
-    overlays.default = self.bscOverlay;
-
-    # full nixpkgs with our overlay applied
-    legacyPackages.${system} = pkgs;
-
-    hydraJobs = {
-      inherit (self.legacyPackages.${system}.bsc-ci) tests pkgs cross;
-    };
-
-    # propagate nixpkgs lib, so we can do bscpkgs.lib
-    inherit (nixpkgs) lib;
-  };
 }
--- a/keys.nix
+++ b/keys.nix
@ -1,37 +0,0 @@
-# As agenix needs to parse the secrets from a standalone .nix file, we describe
-# here all the public keys
-rec {
-  hosts = {
-    hut     = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAICO7jIp6JRnRWTMDsTB/aiaICJCl4x8qmKMPSs4lCqP1 hut";
-    owl1    = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIMqMEXO0ApVsBA6yjmb0xP2kWyoPDIWxBB0Q3+QbHVhv owl1";
-    owl2    = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIHurEYpQzNHqWYF6B9Pd7W8UPgF3BxEg0BvSbsA7BAdK owl2";
-    eudy    = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIL+WYPRRvZupqLAG0USKmd/juEPmisyyJaP8hAgYwXsG eudy";
-    koro    = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIImiTFDbxyUYPumvm8C4mEnHfuvtBY1H8undtd6oDd67 koro";
-    bay     = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAICvGBzpRQKuQYHdlUQeAk6jmdbkrhmdLwTBqf3el7IgU bay";
-    lake2   = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAINo66//S1yatpQHE/BuYD/Gfq64TY7ZN5XOGXmNchiO0 lake2";
-    fox     = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIDwItIk5uOJcQEVPoy/CVGRzfmE1ojrdDcI06FrU4NFT fox";
-    tent    = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFAtTpHtdYoelbknD/IcfBlThwLKJv/dSmylOgpg3FRM tent";
-    apex    = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIBvUFjSfoxXnKwXhEFXx5ckRKJ0oewJ82mRitSMNMKjh apex";
-    weasel  = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFLJrQ8BF6KcweQV8pLkSbFT+tbDxSG9qxrdQE65zJZp weasel";
-    raccoon = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIGNQttFvL0dNEyy7klIhLoK4xXOeM2/K9R7lPMTG3qvK raccoon";
-  };
-
-  hostGroup = with hosts; rec {
-    compute    = [ owl1 owl2 fox raccoon ];
-    playground = [ eudy koro weasel ];
-    storage    = [ bay lake2 ];
-    monitor    = [ hut ];
-    login      = [ apex ];
-
-    system     = storage ++ monitor ++ login;
-    safe       = system ++ compute;
-    all        = safe ++ playground;
-  };
-
-  admins = {
-    "rarias@hut"  = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIE1oZTPtlEXdGt0Ak+upeCIiBdaDQtcmuWoTUCVuSVIR rarias@hut";
-    "rarias@tent" = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIIwlWSBTZi74WTz5xn6gBvTmCoVltmtIAeM3RMmkh4QZ rarias@tent";
-    "rarias@fox"  = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIDSbw3REAKECV7E2c/e2XJITudJQWq2qDSe2N1JHqHZd rarias@fox";
-    root          = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIII/1TNArcwA6D47mgW4TArwlxQRpwmIGiZDysah40Gb root@hut";
-  };
-}
--- a/m/apex/configuration.nix
+++ b/m/apex/configuration.nix
@ -1,69 +0,0 @@
-{ lib, config, pkgs, ... }:
-
-{
-  imports = [
-    ../common/xeon.nix
-    ../common/ssf/hosts.nix
-    ../module/ceph.nix
-    ../module/hut-substituter.nix
-    ../module/slurm-server.nix
-    ./nfs.nix
-    ./wireguard.nix
-  ];
-
-  # Don't install grub MBR for now
-  boot.loader.grub.device = "nodev";
-
-  boot.initrd.kernelModules = [
-    "megaraid_sas" # For HW RAID
-  ];
-
-  environment.systemPackages = with pkgs; [
-    storcli # To manage HW RAID
-  ];
-
-  fileSystems."/home" = {
-    device = "/dev/disk/by-label/home";
-    fsType = "ext4";
-  };
-
-  # No swap, there is plenty of RAM
-  swapDevices = lib.mkForce [];
-
-  networking = {
-    hostName = "apex";
-    defaultGateway = "84.88.53.233";
-    nameservers = [ "8.8.8.8" ];
-
-    # Public facing interface
-    interfaces.eno1.ipv4.addresses = [ {
-      address = "84.88.53.236";
-      prefixLength = 29;
-    } ];
-
-    # Internal LAN to our Ethernet switch
-    interfaces.eno2.ipv4.addresses = [ {
-      address = "10.0.40.30";
-      prefixLength = 24;
-    } ];
-
-    # Infiniband over Omnipath switch (disconnected for now)
-    # interfaces.ibp5s0 = {};
-
-    nat = {
-      enable = true;
-      internalInterfaces = [ "eno2" ];
-      externalInterface = "eno1";
-    };
-  };
-
-  networking.firewall = {
-    extraCommands = ''
-      # Blackhole BSC vulnerability scanner (OpenVAS) as it is spamming our
-      # logs. Insert as first position so we also protect SSH.
-      iptables -I nixos-fw 1 -p tcp -s 192.168.8.16 -j nixos-fw-refuse
-      # Same with opsmonweb01.bsc.es which seems to be trying to access via SSH
-      iptables -I nixos-fw 2 -p tcp -s 84.88.52.176 -j nixos-fw-refuse
-    '';
-  };
-}
--- a/m/apex/nfs.nix
+++ b/m/apex/nfs.nix
@ -1,48 +0,0 @@
-{ ... }:
-
-{
-  services.nfs.server = {
-    enable = true;
-    lockdPort = 4001;
-    mountdPort = 4002;
-    statdPort = 4000;
-    exports = ''
-      /home 10.0.40.0/24(rw,async,no_subtree_check,no_root_squash)
-      /home 10.106.0.0/24(rw,async,no_subtree_check,no_root_squash)
-    '';
-  };
-  networking.firewall = {
-    # Check with `rpcinfo -p`
-    extraCommands = ''
-      # Accept NFS traffic from compute nodes but not from the outside
-      iptables -A nixos-fw -p tcp -s 10.0.40.0/24 --dport 111   -j nixos-fw-accept
-      iptables -A nixos-fw -p tcp -s 10.0.40.0/24 --dport 2049  -j nixos-fw-accept
-      iptables -A nixos-fw -p tcp -s 10.0.40.0/24 --dport 4000  -j nixos-fw-accept
-      iptables -A nixos-fw -p tcp -s 10.0.40.0/24 --dport 4001  -j nixos-fw-accept
-      iptables -A nixos-fw -p tcp -s 10.0.40.0/24 --dport 4002  -j nixos-fw-accept
-      iptables -A nixos-fw -p tcp -s 10.0.40.0/24 --dport 20048 -j nixos-fw-accept
-      # Same but UDP
-      iptables -A nixos-fw -p udp -s 10.0.40.0/24 --dport 111   -j nixos-fw-accept
-      iptables -A nixos-fw -p udp -s 10.0.40.0/24 --dport 2049  -j nixos-fw-accept
-      iptables -A nixos-fw -p udp -s 10.0.40.0/24 --dport 4000  -j nixos-fw-accept
-      iptables -A nixos-fw -p udp -s 10.0.40.0/24 --dport 4001  -j nixos-fw-accept
-      iptables -A nixos-fw -p udp -s 10.0.40.0/24 --dport 4002  -j nixos-fw-accept
-      iptables -A nixos-fw -p udp -s 10.0.40.0/24 --dport 20048 -j nixos-fw-accept
-
-      # Accept NFS traffic from wg0
-      iptables -A nixos-fw -p tcp -i wg0 -s 10.106.0.0/24 --dport 111   -j nixos-fw-accept
-      iptables -A nixos-fw -p tcp -i wg0 -s 10.106.0.0/24 --dport 2049  -j nixos-fw-accept
-      iptables -A nixos-fw -p tcp -i wg0 -s 10.106.0.0/24 --dport 4000  -j nixos-fw-accept
-      iptables -A nixos-fw -p tcp -i wg0 -s 10.106.0.0/24 --dport 4001  -j nixos-fw-accept
-      iptables -A nixos-fw -p tcp -i wg0 -s 10.106.0.0/24 --dport 4002  -j nixos-fw-accept
-      iptables -A nixos-fw -p tcp -i wg0 -s 10.106.0.0/24 --dport 20048 -j nixos-fw-accept
-      # Same but UDP
-      iptables -A nixos-fw -p udp -i wg0 -s 10.106.0.0/24 --dport 111   -j nixos-fw-accept
-      iptables -A nixos-fw -p udp -i wg0 -s 10.106.0.0/24 --dport 2049  -j nixos-fw-accept
-      iptables -A nixos-fw -p udp -i wg0 -s 10.106.0.0/24 --dport 4000  -j nixos-fw-accept
-      iptables -A nixos-fw -p udp -i wg0 -s 10.106.0.0/24 --dport 4001  -j nixos-fw-accept
-      iptables -A nixos-fw -p udp -i wg0 -s 10.106.0.0/24 --dport 4002  -j nixos-fw-accept
-      iptables -A nixos-fw -p udp -i wg0 -s 10.106.0.0/24 --dport 20048 -j nixos-fw-accept
-    '';
-  };
-}
--- a/m/apex/wireguard.nix
+++ b/m/apex/wireguard.nix
@ -1,42 +0,0 @@
-{ config, ... }:
-
-{
-  networking.firewall = {
-    allowedUDPPorts = [ 666 ];
-  };
-
-  age.secrets.wgApex.file = ../../secrets/wg-apex.age;
-
-  # Enable WireGuard
-  networking.wireguard.enable = true;
-  networking.wireguard.interfaces = {
-    # "wg0" is the network interface name. You can name the interface arbitrarily.
-    wg0 = {
-      ips = [ "10.106.0.30/24" ];
-      listenPort = 666;
-      privateKeyFile = config.age.secrets.wgApex.path;
-      # Public key: VwhcN8vSOzdJEotQTpmPHBC52x3Hbv1lkFIyKubrnUA=
-      peers = [
-        {
-          name = "fox";
-          publicKey = "VfMPBQLQTKeyXJSwv8wBhc6OV0j2qAxUpX3kLHunK2Y=";
-          allowedIPs = [ "10.106.0.1/32" ];
-          endpoint = "fox.ac.upc.edu:666";
-          # Send keepalives every 25 seconds. Important to keep NAT tables alive.
-          persistentKeepalive = 25;
-        }
-        {
-          name = "raccoon";
-          publicKey = "QUfnGXSMEgu2bviglsaSdCjidB51oEDBFpnSFcKGfDI=";
-          allowedIPs = [ "10.106.0.236/32" "192.168.0.0/16" "10.0.44.0/24" ];
-        }
-      ];
-    };
-  };
-
-  networking.hosts = {
-    "10.106.0.1" = [ "fox" ];
-    "10.106.0.236" = [ "raccoon" ];
-    "10.0.44.4" = [ "tent" ];
-  };
-}
--- a/m/bay/configuration.nix
+++ b/m/bay/configuration.nix
@ -1,108 +0,0 @@
-{ config, pkgs, lib, ... }:
-
-{
-  imports = [
-    ../common/ssf.nix
-    ../module/hut-substituter.nix
-    ../module/monitoring.nix
-  ];
-
-  # Select the this using the ID to avoid mismatches
-  boot.loader.grub.device = "/dev/disk/by-id/wwn-0x55cd2e414d53562d";
-
-  boot.kernel.sysctl = {
-    "kernel.yama.ptrace_scope" = lib.mkForce "1";
-  };
-
-  environment.systemPackages = with pkgs; [
-    ceph
-  ];
-
-  networking = {
-    hostName = "bay";
-    interfaces.eno1.ipv4.addresses = [ {
-      address = "10.0.40.40";
-      prefixLength = 24;
-    } ];
-    interfaces.ibp5s0.ipv4.addresses = [ {
-      address = "10.0.42.40";
-      prefixLength = 24;
-    } ];
-    firewall = {
-      extraCommands = ''
-        # Accept all incoming TCP traffic from lake2
-        iptables -A nixos-fw -p tcp -s lake2 -j nixos-fw-accept
-        # Accept monitoring requests from hut
-        iptables -A nixos-fw -p tcp -s hut -m multiport --dport 9283,9002 -j nixos-fw-accept
-        # Accept all Ceph traffic from the local network
-        iptables -A nixos-fw -p tcp -s 10.0.40.0/24 -m multiport --dport 3300,6789,6800:7568 -j nixos-fw-accept
-      '';
-    };
-  };
-
-  services.ceph = {
-    enable = true;
-    global = {
-      fsid = "9c8d06e0-485f-4aaf-b16b-06d6daf1232b";
-      monHost = "10.0.40.40";
-      monInitialMembers = "bay";
-      clusterNetwork = "10.0.40.40/24"; # Use Ethernet only
-    };
-    extraConfig = {
-      # Only log to stderr so it appears in the journal
-      "log_file" = "/dev/null";
-      "mon_cluster_log_file" = "/dev/null";
-      "log_to_stderr" = "true";
-      "err_to_stderr" = "true";
-      "log_to_file" = "false";
-    };
-    mds = {
-      enable = true;
-      daemons = [ "mds0" "mds1" ];
-      extraConfig = {
-        "host" = "bay";
-      };
-    };
-    mgr = {
-      enable = true;
-      daemons = [ "bay" ];
-    };
-    mon = {
-      enable = true;
-      daemons = [ "bay" ];
-    };
-    osd = {
-      enable = true;
-      # One daemon per NVME disk
-      daemons = [ "0" "1" "2" "3" ];
-      extraConfig = {
-        "osd crush chooseleaf type" = "0";
-        "osd journal size" = "10000";
-        "osd pool default min size" = "2";
-        "osd pool default pg num" = "200";
-        "osd pool default pgp num" = "200";
-        "osd pool default size" = "3";
-      };
-    };
-  };
-
-  # Missing service for volumes, see:
-  # https://www.reddit.com/r/ceph/comments/14otjyo/comment/jrd69vt/
-  systemd.services.ceph-volume = {
-    enable = true;
-    description = "Ceph Volume activation";
-    unitConfig = {
-      Type = "oneshot";
-      After = "local-fs.target";
-      Wants = "local-fs.target";
-    };
-    path = [ pkgs.ceph pkgs.util-linux pkgs.lvm2 pkgs.cryptsetup ];
-    serviceConfig = {
-      KillMode = "none";
-      Environment = "CEPH_VOLUME_TIMEOUT=10000";
-      ExecStart = "/bin/sh -c 'timeout $CEPH_VOLUME_TIMEOUT ${pkgs.ceph}/bin/ceph-volume lvm activate --all --no-systemd'";
-      TimeoutSec = "0";
-    };
-    wantedBy = [ "multi-user.target" ];
-  };
-}
--- a/m/common/base.nix
+++ b/m/common/base.nix
@ -1,21 +0,0 @@
-{
-  # All machines should include this profile.
-  # Includes the basic configuration for an Intel server.
-  imports = [
-    ./base/agenix.nix
-    ./base/always-power-on.nix
-    ./base/august-shutdown.nix
-    ./base/boot.nix
-    ./base/env.nix
-    ./base/fs.nix
-    ./base/hw.nix
-    ./base/net.nix
-    ./base/nix.nix
-    ./base/ntp.nix
-    ./base/rev.nix
-    ./base/ssh.nix
-    ./base/users.nix
-    ./base/watchdog.nix
-    ./base/zsh.nix
-  ];
-}
--- a/m/common/base/agenix.nix
+++ b/m/common/base/agenix.nix
@ -1,9 +0,0 @@
-{ agenix, ... }:
-
-{
-  imports = [ agenix.nixosModules.default ];
-
-  environment.systemPackages = [
-    agenix.packages.x86_64-linux.default
-  ];
-}
--- a/m/common/base/always-power-on.nix
+++ b/m/common/base/always-power-on.nix
@ -1,8 +0,0 @@
-{
-  imports = [
-    ../../module/power-policy.nix
-  ];
-
-  # Turn on as soon as we have power
-  power.policy = "always-on";
-}
--- a/m/common/base/august-shutdown.nix
+++ b/m/common/base/august-shutdown.nix
@ -1,14 +0,0 @@
-{
-  # Shutdown all machines on August 3rd at 22:00, so we can protect the
-  # hardware from spurious electrical peaks on the yearly electrical cut for
-  # manteinance that starts on August 4th.
-  systemd.timers.august-shutdown = {
-    description = "Shutdown on August 3rd for maintenance";
-    wantedBy = [ "timers.target" ];
-    timerConfig = {
-      OnCalendar = "*-08-03 22:00:00";
-      RandomizedDelaySec = "10min";
-      Unit = "systemd-poweroff.service";
-    };
-  };
-}
--- a/m/common/base/boot.nix
+++ b/m/common/base/boot.nix
@ -1,37 +0,0 @@
-{ lib, pkgs, ... }:
-
-{
-  # Use the GRUB 2 boot loader.
-  boot.loader.grub.enable = true;
-
-  # Enable GRUB2 serial console
-  boot.loader.grub.extraConfig = ''
-    serial --unit=0 --speed=115200 --word=8 --parity=no --stop=1
-    terminal_input --append serial
-    terminal_output --append serial
-  '';
-
-  boot.kernel.sysctl = {
-    "kernel.perf_event_paranoid" = lib.mkDefault "-1";
-
-    # Allow ptracing (i.e. attach with GDB) any process of the same user, see:
-    # https://www.kernel.org/doc/Documentation/security/Yama.txt
-    "kernel.yama.ptrace_scope" = "0";
-  };
-
-  boot.kernelPackages = pkgs.linuxPackages_latest;
-
-  #boot.kernelPatches = lib.singleton {
-  #  name = "osnoise-tracer";
-  #  patch = null;
-  #  extraStructuredConfig = with lib.kernel; {
-  #    OSNOISE_TRACER = yes;
-  #    HWLAT_TRACER = yes;
-  #  };
-  #};
-
-  boot.initrd.availableKernelModules = [ "ahci" "xhci_pci" "ehci_pci" "nvme" "usbhid" "sd_mod" ];
-  boot.initrd.kernelModules = [ ];
-  boot.kernelModules = [ "kvm-intel" ];
-  boot.extraModulePackages = [ ];
-}
--- a/m/common/base/env.nix
+++ b/m/common/base/env.nix
@ -1,37 +0,0 @@
-{ pkgs, config, ... }:
-
-{
-  environment.systemPackages = with pkgs; [
-    vim wget git htop tmux pciutils tcpdump ripgrep nix-index nixos-option
-    nix-diff ipmitool freeipmi ethtool lm_sensors cmake gnumake file tree
-    ncdu config.boot.kernelPackages.perf ldns pv
-    # From bsckgs overlay
-    osumb
-  ];
-
-  programs.direnv.enable = true;
-
-  # Increase limits
-  security.pam.loginLimits = [
-    {
-      domain = "*";
-      type = "-";
-      item = "memlock";
-      value = "1048576"; # 1 GiB of mem locked
-    }
-  ];
-
-  environment.enableAllTerminfo = true;
-
-  environment.variables = {
-    EDITOR = "vim";
-    VISUAL = "vim";
-  };
-
-  programs.bash.promptInit = ''
-    PS1="\h\\$ "
-  '';
-
-  time.timeZone = "Europe/Madrid";
-  i18n.defaultLocale = "en_DK.UTF-8";
-}
--- a/m/common/base/fs.nix
+++ b/m/common/base/fs.nix
@ -1,24 +0,0 @@
-{ ... }:
-
-{
-  fileSystems."/" =
-    { device = "/dev/disk/by-label/nixos";
-      fsType = "ext4";
-    };
-
-  # Trim unused blocks weekly
-  services.fstrim.enable = true;
-
-  swapDevices =
-    [ { device = "/dev/disk/by-label/swap"; }
-    ];
-
-  # Tracing
-  fileSystems."/sys/kernel/tracing" = {
-    device = "none";
-    fsType = "tracefs";
-  };
-
-  # Mount a tmpfs into /tmp
-  boot.tmp.useTmpfs = true;
-}
--- a/m/common/base/hw.nix
+++ b/m/common/base/hw.nix
@ -1,14 +0,0 @@
-# Do not modify this file!  It was generated by ‘nixos-generate-config’
-# and may be overwritten by future invocations.  Please make changes
-# to /etc/nixos/configuration.nix instead.
-{ config, lib, pkgs, modulesPath, ... }:
-
-{
-  imports =
-    [ (modulesPath + "/installer/scan/not-detected.nix")
-    ];
-
-  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
-  powerManagement.cpuFreqGovernor = lib.mkDefault "powersave";
-  hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
-}
--- a/m/common/base/net.nix
+++ b/m/common/base/net.nix
@ -1,23 +0,0 @@
-{ pkgs, lib, ... }:
-
-{
-  networking = {
-    enableIPv6 = false;
-    useDHCP = false;
-
-    firewall = {
-      enable = true;
-      allowedTCPPorts = [ 22 ];
-    };
-
-    # Make sure we use iptables
-    nftables.enable = lib.mkForce false;
-
-    hosts = {
-      "84.88.53.236" = [ "ssfhead.bsc.es" "ssfhead" ];
-      "84.88.51.142" = [ "raccoon-ipmi" ];
-      "192.168.11.12" = [ "bscpm04.bsc.es" ];
-      "192.168.11.15" = [ "gitlab-internal.bsc.es" ];
-    };
-  };
-}
--- a/m/common/base/nix.nix
+++ b/m/common/base/nix.nix
@ -1,59 +0,0 @@
-{ pkgs, nixpkgs, theFlake,  ... }:
-
-{
-  nixpkgs.overlays = [
-    (import ../../../overlay.nix)
-  ];
-
-  nixpkgs.config.allowUnfree = true;
-
-  nix = {
-    nixPath = [
-      "nixpkgs=${nixpkgs}"
-      "jungle=${theFlake.outPath}"
-    ];
-
-    registry = {
-      nixpkgs.flake = nixpkgs;
-      jungle.flake = theFlake;
-    };
-
-    settings = {
-      experimental-features = [ "nix-command" "flakes" ];
-      sandbox = "relaxed";
-      trusted-users = [ "@wheel" ];
-      flake-registry = pkgs.writeText "global-registry.json"
-        ''{"flakes":[],"version":2}'';
-      keep-outputs = true;
-    };
-
-    gc = {
-      automatic = true;
-      dates = "weekly";
-      options = "--delete-older-than 30d";
-    };
-  };
-
-  # The nix-gc.service can begin its execution *before* /home is mounted,
-  # causing it to remove all gcroots considering them as stale, as it cannot
-  # access the symlink. To prevent this problem, we force the service to wait
-  # until /home is mounted as well as other remote FS like /ceph.
-  systemd.services.nix-gc = {
-    # Start remote-fs.target if not already being started and fail if it fails
-    # to start. It will also be stopped if the remote-fs.target fails after
-    # starting successfully.
-    bindsTo = [ "remote-fs.target" ];
-    # Wait until remote-fs.target fully starts before starting this one.
-    after = [ "remote-fs.target"];
-    # Ensure we can access a remote path inside /home
-    unitConfig.ConditionPathExists = "/home/Computational";
-  };
-
-  # This value determines the NixOS release from which the default
-  # settings for stateful data, like file locations and database versions
-  # on your system were taken. It‘s perfectly fine and recommended to leave
-  # this value at the release version of the first install of this system.
-  # Before changing this value read the documentation for this option
-  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
-  system.stateVersion = "22.11"; # Did you read the comment?
-}
--- a/m/common/base/ntp.nix
+++ b/m/common/base/ntp.nix
@ -1,9 +0,0 @@
-{ pkgs, ... }:
-
-{
-  services.ntp.enable = true;
-
-  # Use the NTP server at BSC, as we don't have direct access
-  # to the outside world
-  networking.timeServers = [ "84.88.52.36" ];
-}
--- a/m/common/base/rev.nix
+++ b/m/common/base/rev.nix
@ -1,21 +0,0 @@
-{ theFlake, ... }:
-
-let
-  # Prevent building a configuration without revision
-  rev = if theFlake ? rev then theFlake.rev
-    else throw ("Refusing to build from a dirty Git tree!");
-in {
-  # Save the commit of the config in /etc/configrev
-  environment.etc.configrev.text = rev + "\n";
-
-  # Keep a log with the config over time
-  system.activationScripts.configRevLog.text = ''
-    BOOTED=$(cat /run/booted-system/etc/configrev 2>/dev/null || echo unknown)
-    CURRENT=$(cat /run/current-system/etc/configrev 2>/dev/null || echo unknown)
-    NEXT=${rev}
-    DATENOW=$(date --iso-8601=seconds)
-    echo "$DATENOW booted=$BOOTED current=$CURRENT next=$NEXT" >> /var/configrev.log
-  '';
-
-  system.configurationRevision = rev;
-}
--- a/m/common/base/ssh.nix
+++ b/m/common/base/ssh.nix
@ -1,18 +0,0 @@
-{ lib, ... }:
-
-let
-  keys = import ../../../keys.nix;
-  hostsKeys = lib.mapAttrs (name: value: { publicKey = value; }) keys.hosts;
-in
-{
-  # Enable the OpenSSH daemon.
-  services.openssh.enable = true;
-
-  programs.ssh.knownHosts = hostsKeys // {
-    "gitlab-internal.bsc.es".publicKey = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIF9arsAOSRB06hdy71oTvJHG2Mg8zfebADxpvc37lZo3";
-    "bscpm03.bsc.es".publicKey = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIM2NuSUPsEhqz1j5b4Gqd+MWFnRqyqY57+xMvBUqHYUS";
-    "bscpm04.bsc.es".publicKey = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIPx4mC0etyyjYUT2Ztc/bs4ZXSbVMrogs1ZTP924PDgT";
-    "glogin1.bsc.es".publicKey = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFsHsZGCrzpd4QDVn5xoDOtrNBkb0ylxKGlyBt6l9qCz";
-    "glogin2.bsc.es".publicKey = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFsHsZGCrzpd4QDVn5xoDOtrNBkb0ylxKGlyBt6l9qCz";
-  };
-}
--- a/m/common/base/users.nix
+++ b/m/common/base/users.nix
@ -1,190 +0,0 @@
-{ pkgs, ... }:
-
-{
-  imports = [
-    ../../module/jungle-users.nix
-  ];
-
-  users = {
-    mutableUsers = false;
-    users = {
-      # Generate hashedPassword with `mkpasswd -m sha-512`
-
-      root.openssh.authorizedKeys.keys = [
-        "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIKBOf4r4lzQfyO0bx5BaREePREw8Zw5+xYgZhXwOZoBO ram@hop"
-        "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAINa0tvnNgwkc5xOwd6xTtaIdFi5jv0j2FrE7jl5MTLoE ram@mio"
-        "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIF3zeB5KSimMBAjvzsp1GCkepVaquVZGPYwRIzyzaCba aleix@bsc"
-        "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIII/1TNArcwA6D47mgW4TArwlxQRpwmIGiZDysah40Gb root@hut"
-      ];
-
-      rarias = {
-        uid = 1880;
-        isNormalUser = true;
-        linger = true;
-        home = "/home/Computational/rarias";
-        description = "Rodrigo Arias";
-        group = "Computational";
-        extraGroups = [ "wheel" ];
-        hashedPassword = "$6$u06tkCy13enReBsb$xiI.twRvvTfH4jdS3s68NZ7U9PSbGKs5.LXU/UgoawSwNWhZo2hRAjNL5qG0/lAckzcho2LjD0r3NfVPvthY6/";
-        openssh.authorizedKeys.keys = [
-          "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIKBOf4r4lzQfyO0bx5BaREePREw8Zw5+xYgZhXwOZoBO ram@hop"
-          "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAINa0tvnNgwkc5xOwd6xTtaIdFi5jv0j2FrE7jl5MTLoE ram@mio"
-          "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIGYcXIxe0poOEGLpk8NjiRozls7fMRX0N3j3Ar94U+Gl rarias@hal"
-        ];
-        shell = pkgs.zsh;
-      };
-
-      arocanon = {
-        uid = 1042;
-        isNormalUser = true;
-        home = "/home/Computational/arocanon";
-        description = "Aleix Roca";
-        group = "Computational";
-        extraGroups = [ "wheel" "tracing" ];
-        hashedPassword = "$6$hliZiW4tULC/tH7p$pqZarwJkNZ7vS0G5llWQKx08UFG9DxDYgad7jplMD8WkZh5k58i4dfPoWtnEShfjTO6JHiIin05ny5lmSXzGM/";
-        openssh.authorizedKeys.keys = [
-          "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIF3zeB5KSimMBAjvzsp1GCkepVaquVZGPYwRIzyzaCba aleix@bsc"
-          "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIGdphWxLAEekicZ/WBrvP7phMyxKSSuLAZBovNX+hZXQ aleix@kerneland"
-        ];
-      };
-    };
-
-    jungleUsers = {
-      rpenacob = {
-        uid = 2761;
-        isNormalUser = true;
-        home = "/home/Computational/rpenacob";
-        description = "Raúl Peñacoba";
-        group = "Computational";
-        hosts = [ "apex" "owl1" "owl2" "hut" "tent" "fox" ];
-        hashedPassword = "$6$TZm3bDIFyPrMhj1E$uEDXoYYd1z2Wd5mMPfh3DZAjP7ztVjJ4ezIcn82C0ImqafPA.AnTmcVftHEzLB3tbe2O4SxDyPSDEQgJ4GOtj/";
-        openssh.authorizedKeys.keys = [
-          "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFYfXg37mauGeurqsLpedgA2XQ9d4Nm0ZGo/hI1f7wwH rpenacob@bsc"
-        ];
-      };
-
-      anavarro = {
-        uid = 1037;
-        isNormalUser = true;
-        home = "/home/Computational/anavarro";
-        description = "Antoni Navarro";
-        group = "Computational";
-        hosts = [ "apex" "hut" "tent" "raccoon" "fox" "weasel" ];
-        hashedPassword = "$6$EgturvVYXlKgP43g$gTN78LLHIhaF8hsrCXD.O6mKnZSASWSJmCyndTX8QBWT6wTlUhcWVAKz65lFJPXjlJA4u7G1ydYQ0GG6Wk07b1";
-        openssh.authorizedKeys.keys = [
-          "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIMsbM21uepnJwPrRe6jYFz8zrZ6AYMtSEvvt4c9spmFP toni@delltoni"
-        ];
-      };
-
-      abonerib = {
-        uid = 4541;
-        isNormalUser = true;
-        home = "/home/Computational/abonerib";
-        description = "Aleix Boné";
-        group = "Computational";
-        hosts = [ "apex" "owl1" "owl2" "hut" "tent" "raccoon" "fox" "weasel" ];
-        hashedPassword = "$6$V1EQWJr474whv7XJ$OfJ0wueM2l.dgiJiiah0Tip9ITcJ7S7qDvtSycsiQ43QBFyP4lU0e0HaXWps85nqB4TypttYR4hNLoz3bz662/";
-        openssh.authorizedKeys.keys = [
-          "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIIIFiqXqt88VuUfyANkZyLJNiuroIITaGlOOTMhVDKjf abonerib@bsc"
-        ];
-      };
-
-      vlopez = {
-        uid = 4334;
-        isNormalUser = true;
-        home = "/home/Computational/vlopez";
-        description = "Victor López";
-        group = "Computational";
-        hosts = [ "apex" "koro" ];
-        hashedPassword = "$6$0ZBkgIYE/renVqtt$1uWlJsb0FEezRVNoETTzZMx4X2SvWiOsKvi0ppWCRqI66S6TqMBXBdP4fcQyvRRBt0e4Z7opZIvvITBsEtO0f0";
-        openssh.authorizedKeys.keys = [
-          "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIGMwlUZRf9jfG666Qa5Sb+KtEhXqkiMlBV2su3x/dXHq victor@arch"
-        ];
-      };
-
-      dbautist = {
-        uid = 5649;
-        isNormalUser = true;
-        home = "/home/Computational/dbautist";
-        description = "Dylan Bautista Cases";
-        group = "Computational";
-        hosts = [ "apex" "hut" "tent" "raccoon" ];
-        hashedPassword = "$6$a2lpzMRVkG9nSgIm$12G6.ka0sFX1YimqJkBAjbvhRKZ.Hl090B27pdbnQOW0wzyxVWySWhyDDCILjQELky.HKYl9gqOeVXW49nW7q/";
-        openssh.authorizedKeys.keys = [
-          "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIAb+EQBoS98zrCwnGKkHKwMLdYABMTqv7q9E0+T0QmkS dbautist@bsc-848818791"
-        ];
-      };
-
-      dalvare1 = {
-        uid = 2758;
-        isNormalUser = true;
-        home = "/home/Computational/dalvare1";
-        description = "David Álvarez";
-        group = "Computational";
-        hosts = [ "apex" "hut" "tent" "fox" ];
-        hashedPassword = "$6$mpyIsV3mdq.rK8$FvfZdRH5OcEkUt5PnIUijWyUYZvB1SgeqxpJ2p91TTe.3eQIDTcLEQ5rxeg.e5IEXAZHHQ/aMsR5kPEujEghx0";
-        openssh.authorizedKeys.keys = [
-          "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIGEfy6F4rF80r4Cpo2H5xaWqhuUZzUsVsILSKGJzt5jF dalvare1@ssfhead"
-        ];
-      };
-
-      varcila = {
-        uid = 5650;
-        isNormalUser = true;
-        home = "/home/Computational/varcila";
-        description = "Vincent Arcila";
-        group = "Computational";
-        hosts = [ "apex" "hut" "tent" "fox" ];
-        hashedPassword = "$6$oB0Tcn99DcM4Ch$Vn1A0ulLTn/8B2oFPi9wWl/NOsJzaFAWjqekwcuC9sMC7cgxEVb.Nk5XSzQ2xzYcNe5MLtmzkVYnRS1CqP39Y0";
-        openssh.authorizedKeys.keys = [
-          "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIKGt0ESYxekBiHJQowmKpfdouw0hVm3N7tUMtAaeLejK vincent@varch"
-        ];
-      };
-
-      pmartin1 = {
-        # Arbitrary UID but large so it doesn't collide with other users on ssfhead.
-        uid = 9652;
-        isNormalUser = true;
-        home = "/home/Computational/pmartin1";
-        description = "Pedro J. Martinez-Ferrer";
-        group = "Computational";
-        hosts = [ "fox" ];
-        hashedPassword = "$6$nIgDMGnt4YIZl3G.$.JQ2jXLtDPRKsbsJfJAXdSvjDIzRrg7tNNjPkLPq3KJQhMjfDXRUvzagUHUU2TrE2hHM8/6uq8ex0UdxQ0ysl.";
-        openssh.authorizedKeys.keys = [
-          "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIIV5LEAII5rfe1hYqDYIIrhb1gOw7RcS1p2mhOTqG+zc pedro@pedro-ThinkPad-P14s-Gen-2a"
-        ];
-      };
-
-      csiringo = {
-        uid = 9653;
-        isNormalUser = true;
-        home = "/home/Computational/csiringo";
-        description = "Cesare Siringo";
-        group = "Computational";
-        hosts = [ ];
-        hashedPassword = "$6$0IsZlju8jFukLlAw$VKm0FUXbS.mVmPm3rcJeizTNU4IM5Nmmy21BvzFL.cQwvlGwFI1YWRQm6gsbd4nbg47mPDvYkr/ar0SlgF6GO1";
-        openssh.authorizedKeys.keys = [
-          "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIHA65zvvG50iuFEMf+guRwZB65jlGXfGLF4HO+THFaed csiringo@bsc.es"
-        ];
-      };
-
-      acinca = {
-        uid = 9654;
-        isNormalUser = true;
-        home = "/home/Computational/acinca";
-        description = "Arnau Cinca";
-        group = "Computational";
-        hosts = [ "apex" "hut" "fox" "owl1" "owl2" ];
-        hashedPassword = "$6$S6PUeRpdzYlidxzI$szyvWejQ4hEN76yBYhp1diVO5ew1FFg.cz4lKiXt2Idy4XdpifwrFTCIzLTs5dvYlR62m7ekA5MrhcVxR5F/q/";
-        openssh.authorizedKeys.keys = [
-          "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFmMqKqPg4uocNOr3O41kLbZMOMJn3m2ZdN1JvTR96z3 bsccns@arnau-bsc"
-        ];
-      };
-    };
-
-    groups = {
-      Computational = { gid = 564; };
-      tracing = { };
-    };
-  };
-}
--- a/m/common/base/watchdog.nix
+++ b/m/common/base/watchdog.nix
@ -1,9 +0,0 @@
-{ ... }:
-
-{
-  # The boards have a BMC watchdog controlled by IPMI
-  boot.kernelModules = [ "ipmi_watchdog" ];
-
-  # Enable systemd watchdog with 30 s interval
-  systemd.watchdog.runtimeTime = "30s";
-}
--- a/m/common/base/zsh.nix
+++ b/m/common/base/zsh.nix
@ -1,91 +0,0 @@
-{ pkgs, ... }:
-
-{
-  environment.systemPackages = with pkgs; [
-    zsh-completions
-    nix-zsh-completions
-  ];
-
-  programs.zsh = {
-    enable = true;
-    histSize = 1000000;
-
-    shellInit = ''
-      # Disable new user prompt
-      if [ ! -e ~/.zshrc ]; then
-        touch ~/.zshrc
-      fi
-    '';
-
-    promptInit = ''
-      # Note that to manually override this in ~/.zshrc you should run `prompt off`
-      # before setting your PS1 and etc. Otherwise this will likely to interact with
-      # your ~/.zshrc configuration in unexpected ways as the default prompt sets
-      # a lot of different prompt variables.
-      autoload -U promptinit && promptinit && prompt default && setopt prompt_sp
-    '';
-
-    # Taken from Ulli Kehrle config:
-    # https://git.hrnz.li/Ulli/nixos/src/commit/2e203b8d8d671f4e3ced0f1744a51d5c6ee19846/profiles/shell.nix#L199-L205
-    interactiveShellInit = ''
-      source "${pkgs.zsh-history-substring-search}/share/zsh-history-substring-search/zsh-history-substring-search.zsh"
-
-      # Save history immediately, but only load it when the shell starts
-      setopt inc_append_history
-
-      # dircolors doesn't support alacritty:
-      # https://lists.gnu.org/archive/html/bug-coreutils/2019-05/msg00029.html
-      export LS_COLORS='rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:mi=00:su=37;41:sg=30;43:ca=00:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arc=01;31:*.arj=01;31:*.taz=01;31:*.lha=01;31:*.lz4=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.tzo=01;31:*.t7z=01;31:*.zip=01;31:*.z=01;31:*.dz=01;31:*.gz=01;31:*.lrz=01;31:*.lz=01;31:*.lzo=01;31:*.xz=01;31:*.zst=01;31:*.tzst=01;31:*.bz2=01;31:*.bz=01;31:*.tbz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.war=01;31:*.ear=01;31:*.sar=01;31:*.rar=01;31:*.alz=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.cab=01;31:*.wim=01;31:*.swm=01;31:*.dwm=01;31:*.esd=01;31:*.avif=01;35:*.jpg=01;35:*.jpeg=01;35:*.mjpg=01;35:*.mjpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.webm=01;35:*.webp=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=00;36:*.au=00;36:*.flac=00;36:*.m4a=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:*.oga=00;36:*.opus=00;36:*.spx=00;36:*.xspf=00;36:*~=00;90:*#=00;90:*.bak=00;90:*.old=00;90:*.orig=00;90:*.part=00;90:*.rej=00;90:*.swp=00;90:*.tmp=00;90:*.dpkg-dist=00;90:*.dpkg-old=00;90:*.ucf-dist=00;90:*.ucf-new=00;90:*.ucf-old=00;90:*.rpmnew=00;90:*.rpmorig=00;90:*.rpmsave=00;90:';
-
-      # From Arch Linux and GRML
-      bindkey "^R" history-incremental-pattern-search-backward
-      bindkey "^S" history-incremental-pattern-search-forward
-
-      # Auto rehash for new binaries
-      zstyle ':completion:*' rehash true
-      # show a nice menu with the matches
-      zstyle ':completion:*' menu yes select
-
-      bindkey '^[OA' history-substring-search-up   # Up
-      bindkey '^[[A' history-substring-search-up   # Up
-
-      bindkey '^[OB' history-substring-search-down # Down
-      bindkey '^[[B' history-substring-search-down # Down
-
-      bindkey '\e[1~' beginning-of-line            # Home
-      bindkey '\e[7~' beginning-of-line            # Home
-      bindkey '\e[H'  beginning-of-line            # Home
-      bindkey '\eOH'  beginning-of-line            # Home
-
-      bindkey '\e[4~' end-of-line                  # End
-      bindkey '\e[8~' end-of-line                  # End
-      bindkey '\e[F ' end-of-line                  # End
-      bindkey '\eOF'  end-of-line                  # End
-
-      bindkey '^?'    backward-delete-char         # Backspace
-      bindkey '\e[3~' delete-char                  # Del
-      # bindkey '\e[3;5~' delete-char                # sometimes Del, sometimes C-Del
-      bindkey '\e[2~' overwrite-mode               # Ins
-
-      bindkey '^H'      backward-kill-word         # C-Backspace
-
-      bindkey '5~'      kill-word                  # C-Del
-      bindkey '^[[3;5~' kill-word                  # C-Del
-      bindkey '^[[3^'   kill-word                  # C-Del
-
-      bindkey "^[[1;5H" backward-kill-line         # C-Home
-      bindkey "^[[7^"   backward-kill-line         # C-Home
-
-      bindkey "^[[1;5F" kill-line                  # C-End
-      bindkey "^[[8^"   kill-line                  # C-End
-
-      bindkey '^[[1;5C' forward-word               # C-Right
-      bindkey '^[0c'    forward-word               # C-Right
-      bindkey '^[[5C'   forward-word               # C-Right
-
-      bindkey '^[[1;5D' backward-word              # C-Left
-      bindkey '^[0d'    backward-word              # C-Left
-      bindkey '^[[5D'   backward-word              # C-Left
-    '';
-  };
-}
--- a/m/common/ssf.nix
+++ b/m/common/ssf.nix
@ -1,10 +0,0 @@
-{
-  # Provides the base system for a xeon node in the SSF rack.
-  imports = [
-    ./xeon.nix
-    ./ssf/fs.nix
-    ./ssf/hosts.nix
-    ./ssf/hosts-remote.nix
-    ./ssf/net.nix
-  ];
-}
--- a/m/common/ssf/fs.nix
+++ b/m/common/ssf/fs.nix
@ -1,8 +0,0 @@
-{
-  # Mount the home via NFS
-  fileSystems."/home" = {
-    device = "10.0.40.30:/home";
-    fsType = "nfs";
-    options = [ "nfsvers=3" "rsize=1024" "wsize=1024" "cto" "nofail" ];
-  };
-}
--- a/m/common/ssf/hosts-remote.nix
+++ b/m/common/ssf/hosts-remote.nix
@ -1,9 +0,0 @@
-{ pkgs, ... }:
-
-{
-  networking.hosts = {
-    # Remote hosts visible from compute nodes
-    "10.106.0.236" = [ "raccoon" ];
-    "10.0.44.4" = [ "tent" ];
-  };
-}
--- a/m/common/ssf/hosts.nix
+++ b/m/common/ssf/hosts.nix
@ -1,23 +0,0 @@
-{ pkgs, ... }:
-
-{
-  networking.hosts = {
-    # Login
-    "10.0.40.30" = [ "apex" ];
-
-    # Storage
-    "10.0.40.40" = [ "bay" ];   "10.0.42.40" = [ "bay-ib" ];    "10.0.40.141" = [ "bay-ipmi" ];
-    "10.0.40.41" = [ "oss01" ]; "10.0.42.41" = [ "oss01-ib0" ]; "10.0.40.142" = [ "oss01-ipmi" ];
-    "10.0.40.42" = [ "lake2" ]; "10.0.42.42" = [ "lake2-ib" ];  "10.0.40.143" = [ "lake2-ipmi" ];
-
-    # Xeon compute
-    "10.0.40.1" = [ "owl1" ];   "10.0.42.1" = [ "owl1-ib" ];   "10.0.40.101" = [ "owl1-ipmi" ];
-    "10.0.40.2" = [ "owl2" ];   "10.0.42.2" = [ "owl2-ib" ];   "10.0.40.102" = [ "owl2-ipmi" ];
-    "10.0.40.3" = [ "xeon03" ]; "10.0.42.3" = [ "xeon03-ib" ]; "10.0.40.103" = [ "xeon03-ipmi" ];
-    #"10.0.40.4" = [ "tent" ];   "10.0.42.4" = [ "tent-ib" ];   "10.0.40.104" = [ "tent-ipmi" ];
-    "10.0.40.5" = [ "koro" ];   "10.0.42.5" = [ "koro-ib" ];   "10.0.40.105" = [ "koro-ipmi" ];
-    "10.0.40.6" = [ "weasel" ]; "10.0.42.6" = [ "weasel-ib" ]; "10.0.40.106" = [ "weasel-ipmi" ];
-    "10.0.40.7" = [ "hut" ];    "10.0.42.7" = [ "hut-ib" ];    "10.0.40.107" = [ "hut-ipmi" ];
-    "10.0.40.8" = [ "eudy" ];   "10.0.42.8" = [ "eudy-ib" ];   "10.0.40.108" = [ "eudy-ipmi" ];
-  };
-}
--- a/m/common/ssf/net.nix
+++ b/m/common/ssf/net.nix
@ -1,23 +0,0 @@
-{ pkgs, ... }:
-
-{
-  # Infiniband (IPoIB)
-  environment.systemPackages = [ pkgs.rdma-core ];
-  boot.kernelModules = [ "ib_umad" "ib_ipoib" ];
-
-  networking = {
-    defaultGateway = "10.0.40.30";
-    nameservers = ["8.8.8.8"];
-
-    firewall = {
-      extraCommands = ''
-        # Prevent ssfhead from contacting our slurmd daemon
-        iptables -A nixos-fw -p tcp -s ssfhead --dport 6817:6819 -j nixos-fw-refuse
-        # But accept traffic to slurm ports from any other node in the subnet
-        iptables -A nixos-fw -p tcp -s 10.0.40.0/24 --dport 6817:6819 -j nixos-fw-accept
-        # We also need to open the srun port range
-        iptables -A nixos-fw -p tcp -s 10.0.40.0/24 --dport 60000:61000 -j nixos-fw-accept
-      '';
-    };
-  };
-}
--- a/m/common/xeon.nix
+++ b/m/common/xeon.nix
@ -1,7 +0,0 @@
-{
-  # Provides the base system for a xeon node, not necessarily in the SSF rack.
-  imports = [
-    ./base.nix
-    ./xeon/console.nix
-  ];
-}
--- a/m/common/xeon/console.nix
+++ b/m/common/xeon/console.nix
@ -1,14 +0,0 @@
-{
-  # Restart the serial console
-  systemd.services."serial-getty@ttyS0" = {
-    enable = true;
-    wantedBy = [ "getty.target" ];
-    serviceConfig.Restart = "always";
-  };
-
-  # Enable serial console
-  boot.kernelParams = [
-    "console=tty1"
-    "console=ttyS0,115200"
-  ];
-}
--- a/m/eudy/configuration.nix
+++ b/m/eudy/configuration.nix
@ -1,38 +0,0 @@
-{ config, pkgs, lib, modulesPath, ... }:
-
-{
-  imports = [
-    ../common/ssf.nix
-    #(modulesPath + "/installer/netboot/netboot-minimal.nix")
-
-    ./kernel/kernel.nix
-    ./cpufreq.nix
-    ./fs.nix
-    ./users.nix
-    ../module/hut-substituter.nix
-    ../module/debuginfod.nix
-  ];
-
-  # Select this using the ID to avoid mismatches
-  boot.loader.grub.device = "/dev/disk/by-id/wwn-0x55cd2e414d53564b";
-
-  # disable automatic garbage collector
-  nix.gc.automatic = lib.mkForce false;
-
-  # members of the tracing group can use the lttng-provided kernel events
-  # without root permissions
-  users.groups.tracing.members = [ "arocanon" ];
-
-  # set up both ethernet and infiniband ips
-  networking = {
-    hostName = "eudy";
-    interfaces.eno1.ipv4.addresses = [ {
-      address = "10.0.40.8";
-      prefixLength = 24;
-    } ];
-    interfaces.ibp5s0.ipv4.addresses = [ {
-      address = "10.0.42.8";
-      prefixLength = 24;
-    } ];
-  };
-}
--- a/m/eudy/cpufreq.nix
+++ b/m/eudy/cpufreq.nix
@ -1,40 +0,0 @@
-{ lib, ... }:
-
-{
-  # Disable frequency boost by default. Use the intel_pstate driver instead of
-  # acpi_cpufreq driver because the acpi_cpufreq driver does not read the
-  # complete range of P-States [1]. Use the intel_pstate passive mode [2] to
-  # disable HWP, which allows a core to "select P-states by itself". Also, this
-  # disables intel governors, which confusingly, have the same names as the
-  # generic ones but behave differently [3].
-
-  # Essentially, we use the generic governors, but use the intel driver to read
-  # the P-state list.
-
-  # [1] - https://www.kernel.org/doc/html/latest/admin-guide/pm/intel_pstate.html#intel-pstate-vs-acpi-cpufreq
-  # [2] - https://www.kernel.org/doc/html/latest/admin-guide/pm/intel_pstate.html#passive-mode
-  # [3] - https://www.kernel.org/doc/html/latest/admin-guide/pm/intel_pstate.html#active-mode
-  # https://www.kernel.org/doc/html/latest/admin-guide/pm/cpufreq.html
-
-  # set intel_pstate to passive mode
-  boot.kernelParams = [
-    "intel_pstate=passive"
-  ];
-  # Disable frequency boost
-  system.activationScripts = {
-    disableFrequencyBoost.text = ''
-      echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo
-    '';
-  };
-
-  ## disable intel_pstate
-  #boot.kernelParams = [
-  #  "intel_pstate=disable"
-  #];
-  ## Disable frequency boost
-  #system.activationScripts = {
-  #  disableFrequencyBoost.text = ''
-  #    echo 0 > /sys/devices/system/cpu/cpufreq/boost
-  #  '';
-  #};
-}
--- a/m/eudy/fs.nix
+++ b/m/eudy/fs.nix
@ -1,13 +0,0 @@
-{ ... }:
-
-{
-  fileSystems."/nix" = {
-    device = "/dev/disk/by-label/optane";
-    fsType = "ext4";
-    neededForBoot = true;
-  };
-  fileSystems."/mnt/data" = {
-    device = "/dev/disk/by-label/data";
-    fsType = "ext4";
-  };
-}
--- a/m/eudy/kernel/kernel.nix
+++ b/m/eudy/kernel/kernel.nix
@ -1,70 +0,0 @@
-{ pkgs, lib, ... }:
-
-let
-  #fcs-devel = pkgs.linuxPackages_custom {
-  #   version = "6.2.8";
-  #   src = /mnt/data/kernel/fcs/kernel/src;
-  #   configfile = /mnt/data/kernel/fcs/kernel/configs/defconfig;
-  #};
-
-  #fcsv1 = fcs-kernel "bc11660676d3d68ce2459b9fb5d5e654e3f413be" false;
-  #fcsv2 = fcs-kernel "db0f2eca0cd57a58bf456d7d2c7d5d8fdb25dfb1" false;
-  #fcsv1-lockdep = fcs-kernel "bc11660676d3d68ce2459b9fb5d5e654e3f413be" true;
-  #fcsv2-lockdep = fcs-kernel "db0f2eca0cd57a58bf456d7d2c7d5d8fdb25dfb1" true;
-  #fcs-kernel = gitCommit: lockdep: pkgs.linuxPackages_custom {
-  #   version = "6.2.8";
-  #   src = builtins.fetchGit {
-  #     url = "git@bscpm03.bsc.es:ompss-kernel/linux.git";
-  #     rev = gitCommit;
-  #     ref = "fcs";
-  #   };
-  #   configfile = if lockdep then ./configs/lockdep else ./configs/defconfig;
-  #};
-
-  kernel = nixos-fcs;
-
-  nixos-fcs-kernel = lib.makeOverridable ({gitCommit, lockStat ? false, preempt ? false, branch ? "fcs"}: pkgs.linuxPackagesFor (pkgs.buildLinux rec {
-    version = "6.2.8";
-    src = builtins.fetchGit {
-      url = "git@bscpm03.bsc.es:ompss-kernel/linux.git";
-      rev = gitCommit;
-      ref = branch;
-    };
-    structuredExtraConfig = with lib.kernel; {
-      # add general custom kernel options here
-    } // lib.optionalAttrs lockStat {
-      LOCK_STAT = yes;
-    } // lib.optionalAttrs preempt {
-      PREEMPT = lib.mkForce yes;
-      PREEMPT_VOLUNTARY = lib.mkForce no;
-    };
-    kernelPatches = [];
-    extraMeta.branch = lib.versions.majorMinor version;
-  }));
-
-  nixos-fcs = nixos-fcs-kernel {gitCommit = "8a09822dfcc8f0626b209d6d2aec8b5da459dfee";};
-  nixos-fcs-lockstat = nixos-fcs.override {
-    lockStat = true;
-  };
-  nixos-fcs-lockstat-preempt = nixos-fcs.override {
-    lockStat = true;
-    preempt = true;
-  };
-  latest = pkgs.linuxPackages_latest;
-
-in {
-  imports = [
-    ./lttng.nix
-    ./perf.nix
-  ];
-  boot.kernelPackages = lib.mkForce kernel;
-
-  # disable all cpu mitigations
-  boot.kernelParams = [
-    "mitigations=off"
-  ];
-  
-  # enable memory overcommit, needed to build a taglibc system using nix after
-  # increasing the openblas memory footprint
-  boot.kernel.sysctl."vm.overcommit_memory" = 1;
-}
--- a/m/eudy/kernel/lttng.nix
+++ b/m/eudy/kernel/lttng.nix
@ -1,43 +0,0 @@
-{ config, pkgs, lib, ... }:
-
-let
-
-  # The lttng btrfs probe crashes at compile time because of an undefined
-  # function. This disables the btrfs tracepoints to avoid the issue.
-
-  # Also enable lockdep tracepoints, this is disabled by default because it
-  # does not work well on architectures other than x86_64 (i think that arm) as
-  # I was told on the mailing list.
-  lttng-modules-fixed = config.boot.kernelPackages.lttng-modules.overrideAttrs (finalAttrs: previousAttrs: {
-    patchPhase = (lib.optionalString (previousAttrs ? patchPhase) previousAttrs.patchPhase) + ''
-      # disable btrfs
-      substituteInPlace src/probes/Kbuild \
-        --replace "  obj-\$(CONFIG_LTTNG) += lttng-probe-btrfs.o" "  #obj-\$(CONFIG_LTTNG) += lttng-probe-btrfs.o"
-
-      # enable lockdep tracepoints
-      substituteInPlace src/probes/Kbuild \
-        --replace "#ifneq (\$(CONFIG_LOCKDEP),)"                  "ifneq (\$(CONFIG_LOCKDEP),)" \
-        --replace "#  obj-\$(CONFIG_LTTNG) += lttng-probe-lock.o" "  obj-\$(CONFIG_LTTNG) += lttng-probe-lock.o" \
-        --replace "#endif # CONFIG_LOCKDEP"                       "endif # CONFIG_LOCKDEP"
-    '';
-  });
-in {
-
-  # add the lttng tools and modules to the system environment
-  boot.extraModulePackages = [ lttng-modules-fixed ];
-  environment.systemPackages = with pkgs; [
-    lttng-tools lttng-ust babeltrace
-  ];
-
-  # start the lttng root daemon to manage kernel events
-  systemd.services.lttng-sessiond = {
-    wantedBy = [ "multi-user.target" ];
-    description = "LTTng session daemon for the root user";
-    serviceConfig = {
-      User = "root";
-      ExecStart = ''
-        ${pkgs.lttng-tools}/bin/lttng-sessiond
-      '';
-    };
-  };
-}
--- a/m/eudy/kernel/perf.nix
+++ b/m/eudy/kernel/perf.nix
@ -1,22 +0,0 @@
-{ config, pkgs, lib, ... }:
-
-{
-  # add the perf tool
-  environment.systemPackages = with pkgs; [
-    config.boot.kernelPackages.perf
-  ];
-
-  # allow non-root users to read tracing data from the kernel
-  boot.kernel.sysctl."kernel.perf_event_paranoid" = -2;
-  boot.kernel.sysctl."kernel.kptr_restrict" = 0;
-
-  # specify additionl options to the tracefs directory to allow members of the
-  # tracing group to access tracefs.
-  fileSystems."/sys/kernel/tracing" = {
-    options = [
-      "mode=755"
-      "gid=tracing"
-    ];
-  };
-}
-
--- a/m/eudy/users.nix
+++ b/m/eudy/users.nix
@ -1,11 +0,0 @@
-{ ... }:
-
-{
-  security.sudo.extraRules= [{
-    users = [ "arocanon" ];
-    commands = [{
-      command = "ALL" ;
-      options= [ "NOPASSWD" ]; # "SETENV" # Adding the following could be a good idea
-    }];
-  }];
-}
--- a/m/fox/configuration.nix
+++ b/m/fox/configuration.nix
@ -1,112 +0,0 @@
-{ lib, config, pkgs, ... }:
-
-{
-  imports = [
-    ../common/base.nix
-    ../common/xeon/console.nix
-    ../module/amd-uprof.nix
-    ../module/emulation.nix
-    ../module/nvidia.nix
-    ../module/slurm-client.nix
-    ../module/hut-substituter.nix
-    ./wireguard.nix
-  ];
-
-  # Don't turn off on August as UPC has different dates.
-  # Fox works fine on power cuts.
-  systemd.timers.august-shutdown.enable = false;
-
-  # Select the this using the ID to avoid mismatches
-  boot.loader.grub.device = "/dev/disk/by-id/wwn-0x500a07514b0c1103";
-
-  # No swap, there is plenty of RAM
-  swapDevices = lib.mkForce [];
-
-  boot.initrd.availableKernelModules = [ "xhci_pci" "ahci" "nvme" "usbhid" "usb_storage" "sd_mod" ];
-  boot.kernelModules = [ "kvm-amd" "amd_uncore" "amd_hsmp" ];
-
-  hardware.cpu.amd.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
-  hardware.cpu.intel.updateMicrocode = lib.mkForce false;
-
-  # Use performance for benchmarks
-  powerManagement.cpuFreqGovernor = "performance";
-
-  services.amd-uprof.enable = true;
-
-  # Disable NUMA balancing
-  boot.kernel.sysctl."kernel.numa_balancing" = 0;
-
-  # Expose kernel addresses
-  boot.kernel.sysctl."kernel.kptr_restrict" = 0;
-
-  # Disable NMI watchdog to save one hw counter (for AMD uProf)
-  boot.kernel.sysctl."kernel.nmi_watchdog" = 0;
-
-  services.openssh.settings.X11Forwarding = true;
-
-  services.fail2ban.enable = true;
-
-  networking = {
-    timeServers = [ "ntp1.upc.edu" "ntp2.upc.edu" ];
-    hostName = "fox";
-    # UPC network (may change over time, use DHCP)
-    # Public IP configuration:
-    # - Hostname: fox.ac.upc.edu
-    # - IP: 147.83.30.141
-    # - Gateway: 147.83.30.130
-    # - NetMask: 255.255.255.192
-    # Private IP configuration for BMC:
-    # - Hostname: fox-ipmi.ac.upc.edu
-    # - IP: 147.83.35.27
-    # - Gateway: 147.83.35.2
-    # - NetMask: 255.255.255.0
-    interfaces.enp1s0f0np0.useDHCP = true;
-  };
-
-  # Recommended for new graphics cards
-  hardware.nvidia.open = true;
-
-  # Mount NVME disks
-  fileSystems."/nvme0" = { device = "/dev/disk/by-label/nvme0"; fsType = "ext4"; };
-  fileSystems."/nvme1" = { device = "/dev/disk/by-label/nvme1"; fsType = "ext4"; };
-
-  # Mount the NFS home
-  fileSystems."/nfs/home" = {
-    device = "10.106.0.30:/home";
-    fsType = "nfs";
-    options = [ "nfsvers=3" "rsize=1024" "wsize=1024" "cto" "nofail" ];
-  };
-
-  # Make a /nvme{0,1}/$USER directory for each user.
-  systemd.services.create-nvme-dirs = let
-    # Take only normal users in fox
-    users = lib.filterAttrs (_: v: v.isNormalUser) config.users.users;
-    commands = lib.concatLists (lib.mapAttrsToList
-      (_: user: [
-        "install -d -o ${user.name} -g ${user.group} -m 0755 /nvme{0,1}/${user.name}"
-      ]) users);
-    script = pkgs.writeShellScript "create-nvme-dirs.sh" (lib.concatLines commands);
-  in {
-    enable = true;
-    wants = [ "local-fs.target" ];
-    after = [ "local-fs.target" ];
-    wantedBy = [ "multi-user.target" ];
-    serviceConfig.ExecStart = script;
-  };
-
-  # Only allow SSH connections from users who have a SLURM allocation
-  # See: https://slurm.schedmd.com/pam_slurm_adopt.html
-  security.pam.services.sshd.rules.account.slurm = {
-    control = "required";
-    enable = true;
-    modulePath = "${pkgs.slurm}/lib/security/pam_slurm_adopt.so";
-    args = [ "log_level=debug5" ];
-    order = 999999; # Make it last one
-  };
-
-  # Disable systemd session (pam_systemd.so) as it will conflict with the
-  # pam_slurm_adopt.so module. What happens is that the shell is first adopted
-  # into the slurmstepd task and then into the systemd session, which is not
-  # what we want, otherwise it will linger even if all jobs are gone.
-  security.pam.services.sshd.startSession = lib.mkForce false;
-}
--- a/m/fox/wireguard.nix
+++ b/m/fox/wireguard.nix
@ -1,54 +0,0 @@
-{ config, ... }:
-
-{
-  networking.firewall = {
-    allowedUDPPorts = [ 666 ];
-  };
-
-  age.secrets.wgFox.file = ../../secrets/wg-fox.age;
-
-  networking.wireguard.enable = true;
-  networking.wireguard.interfaces = {
-    # "wg0" is the network interface name. You can name the interface arbitrarily.
-    wg0 = {
-      # Determines the IP address and subnet of the server's end of the tunnel interface.
-      ips = [ "10.106.0.1/24" ];
-
-      # The port that WireGuard listens to. Must be accessible by the client.
-      listenPort = 666;
-
-      # Path to the private key file.
-      privateKeyFile = config.age.secrets.wgFox.path;
-      # Public key: VfMPBQLQTKeyXJSwv8wBhc6OV0j2qAxUpX3kLHunK2Y=
-
-      peers = [
-        # List of allowed peers.
-        {
-          name = "apex";
-          publicKey = "VwhcN8vSOzdJEotQTpmPHBC52x3Hbv1lkFIyKubrnUA=";
-          # List of IPs assigned to this peer within the tunnel subnet. Used to configure routing.
-          allowedIPs = [ "10.106.0.30/32" "10.0.40.7/32" ];
-        }
-        {
-          name = "raccoon";
-          publicKey = "QUfnGXSMEgu2bviglsaSdCjidB51oEDBFpnSFcKGfDI=";
-          allowedIPs = [ "10.106.0.236/32" "192.168.0.0/16" "10.0.44.0/24" ];
-        }
-      ];
-    };
-  };
-
-  networking.hosts = {
-    "10.106.0.30" = [ "apex" ];
-    "10.0.40.7" = [ "hut" ];
-    "10.106.0.236" = [ "raccoon" ];
-    "10.0.44.4" = [ "tent" ];
-  };
-
-  networking.firewall = {
-    extraCommands = ''
-      # Accept slurm connections to slurmd from apex (via wireguard)
-      iptables -A nixos-fw -p tcp -i wg0 -s 10.106.0.30/32 -d 10.106.0.1/32 --dport 6818 -j nixos-fw-accept
-    '';
-  };
-}
--- a/m/hut/blackbox.yml
+++ b/m/hut/blackbox.yml
@ -1,14 +0,0 @@
-modules:
-  http_2xx:
-    prober: http
-    timeout: 5s
-    http:
-      follow_redirects: true
-      preferred_ip_protocol: "ip4"
-      valid_status_codes: []  # Defaults to 2xx
-      method: GET
-  icmp:
-    prober: icmp
-    timeout: 5s
-    icmp:
-      preferred_ip_protocol: "ip4"
--- a/m/hut/configuration.nix
+++ b/m/hut/configuration.nix
@ -1,67 +0,0 @@
-{ config, pkgs, lib, ... }:
-
-{
-  imports = [
-    ../common/ssf.nix
-
-    ../module/ceph.nix
-    ../module/debuginfod.nix
-    ../module/emulation.nix
-    ./gitlab-runner.nix
-    ./monitoring.nix
-    ./nfs.nix
-    ./nix-serve.nix
-    ./public-inbox.nix
-    ./gitea.nix
-    ./msmtp.nix
-    ./postgresql.nix
-    ./nginx.nix
-    ./p.nix
-    #./pxe.nix
-  ];
-
-  # Select the this using the ID to avoid mismatches
-  boot.loader.grub.device = "/dev/disk/by-id/wwn-0x55cd2e414d53567f";
-
-  fileSystems = {
-    "/" = lib.mkForce {
-      device = "/dev/disk/by-label/nvme";
-      fsType = "ext4";
-      neededForBoot = true;
-      options = [ "noatime" ];
-    };
-
-    "/boot" = lib.mkForce {
-      device = "/dev/disk/by-label/nixos-boot";
-      fsType = "ext4";
-      neededForBoot = true;
-    };
-  };
-
-  networking = {
-    hostName = "hut";
-    interfaces.eno1.ipv4.addresses = [ {
-      address = "10.0.40.7";
-      prefixLength = 24;
-    } ];
-    interfaces.ibp5s0.ipv4.addresses = [ {
-      address = "10.0.42.7";
-      prefixLength = 24;
-    } ];
-    firewall = {
-      extraCommands = ''
-        # Accept all proxy traffic from compute nodes but not the login
-        iptables -A nixos-fw -p tcp -s 10.0.40.30 --dport 23080 -j nixos-fw-log-refuse
-        iptables -A nixos-fw -p tcp -s 10.0.40.0/24 --dport 23080 -j nixos-fw-accept
-      '';
-      # Flush all rules and chains on stop so it won't break on start
-      extraStopCommands = ''
-        iptables -F
-        iptables -X
-      '';
-    };
-  };
-
-  # Allow proxy to bind to the ethernet interface
-  services.openssh.settings.GatewayPorts = "clientspecified";
-}
--- a/m/hut/gitea.nix
+++ b/m/hut/gitea.nix
@ -1,63 +0,0 @@
-{ config, lib, ... }:
-{
-  age.secrets.giteaRunnerToken.file = ../../secrets/gitea-runner-token.age;
-
-  services.gitea = {
-    enable = true;
-    appName = "Gitea in the jungle";
-
-    settings = {
-      server = {
-        ROOT_URL = "https://jungle.bsc.es/git/";
-        LOCAL_ROOT_URL = "https://jungle.bsc.es/git/";
-        LANDING_PAGE = "explore";
-      };
-      metrics.ENABLED = true;
-      service = {
-        REGISTER_MANUAL_CONFIRM = true;
-        ENABLE_NOTIFY_MAIL = true;
-      };
-      log.LEVEL = "Warn";
-
-      mailer = {
-        ENABLED       = true;
-        FROM          = "jungle-robot@bsc.es";
-        PROTOCOL      = "sendmail";
-        SENDMAIL_PATH = "/run/wrappers/bin/sendmail";
-        SENDMAIL_ARGS = "--";
-      };
-    };
-  };
-
-  services.gitea-actions-runner.instances = {
-    runrun = {
-      enable = true;
-      name = "runrun";
-      url = "https://jungle.bsc.es/git/";
-      tokenFile = config.age.secrets.giteaRunnerToken.path;
-      labels = [ "native:host" ];
-      settings.runner.capacity = 8;
-    };
-  };
-
-  systemd.services.gitea-runner-runrun = {
-    path = [ "/run/current-system/sw" ];
-    serviceConfig = {
-      # DynamicUser doesn't work well with SSH
-      DynamicUser = lib.mkForce false;
-      User = "gitea-runner";
-      Group = "gitea-runner";
-    };
-  };
-
-  users.users.gitea-runner = {
-    isSystemUser = true;
-    home = "/var/lib/gitea-runner";
-    description = "Gitea Runner";
-    group = "gitea-runner";
-    extraGroups = [ "docker" ];
-    createHome = true;
-  };
-  users.groups.gitea-runner = {};
-}
-
--- a/m/hut/gitlab-runner.nix
+++ b/m/hut/gitlab-runner.nix
@ -1,126 +0,0 @@
-{ pkgs, lib, config, ... }:
-
-{
-  age.secrets.gitlab-pm-shell.file = ../../secrets/gitlab-runner-shell-token.age;
-  age.secrets.gitlab-pm-docker.file = ../../secrets/gitlab-runner-docker-token.age;
-  age.secrets.gitlab-bsc-docker.file = ../../secrets/gitlab-bsc-docker-token.age;
-
-  services.gitlab-runner = {
-    enable = true;
-    settings.concurrent = 5;
-    services = let
-      common-shell = {
-        executor = "shell";
-        environmentVariables = {
-          SHELL = "${pkgs.bash}/bin/bash";
-        };
-      };
-      common-docker = {
-        executor = "docker";
-        dockerImage = "debian:stable";
-        registrationFlags = [
-          "--docker-network-mode host"
-        ];
-        environmentVariables = {
-          https_proxy = "http://hut:23080";
-          http_proxy = "http://hut:23080";
-        };
-      };
-    in {
-      # For pm.bsc.es/gitlab
-      gitlab-pm-shell = common-shell // {
-        authenticationTokenConfigFile = config.age.secrets.gitlab-pm-shell.path;
-      };
-      gitlab-pm-docker = common-docker // {
-        authenticationTokenConfigFile = config.age.secrets.gitlab-pm-docker.path;
-      };
-
-      gitlab-bsc-docker = {
-        # gitlab.bsc.es still uses the old token mechanism
-        registrationConfigFile = config.age.secrets.gitlab-bsc-docker.path;
-        tagList = [ "docker" "hut" ];
-        environmentVariables = {
-          # We cannot access the hut local interface from docker, so we connect
-          # to hut directly via the ethernet one.
-          https_proxy = "http://hut:23080";
-          http_proxy = "http://hut:23080";
-        };
-        executor = "docker";
-        dockerImage = "alpine";
-        dockerVolumes = [
-          "/nix/store:/nix/store:ro"
-          "/nix/var/nix/db:/nix/var/nix/db:ro"
-          "/nix/var/nix/daemon-socket:/nix/var/nix/daemon-socket:ro"
-        ];
-        dockerExtraHosts = [
-          # Required to pass the proxy via hut
-          "hut:10.0.40.7"
-        ];
-        dockerDisableCache = true;
-        registrationFlags = [
-          # Increase build log length to 64 MiB
-          "--output-limit 65536"
-        ];
-        preBuildScript = pkgs.writeScript "setup-container" ''
-          mkdir -p -m 0755 /nix/var/log/nix/drvs
-          mkdir -p -m 0755 /nix/var/nix/gcroots
-          mkdir -p -m 0755 /nix/var/nix/profiles
-          mkdir -p -m 0755 /nix/var/nix/temproots
-          mkdir -p -m 0755 /nix/var/nix/userpool
-          mkdir -p -m 1777 /nix/var/nix/gcroots/per-user
-          mkdir -p -m 1777 /nix/var/nix/profiles/per-user
-          mkdir -p -m 0755 /nix/var/nix/profiles/per-user/root
-          mkdir -p -m 0700 "$HOME/.nix-defexpr"
-          mkdir -p -m 0700 "$HOME/.ssh"
-          cat > "$HOME/.ssh/config" << EOF
-          Host bscpm04.bsc.es gitlab-internal.bsc.es
-            User git
-            ProxyCommand nc -X connect -x hut:23080 %h %p
-          Host amdlogin1.bsc.es armlogin1.bsc.es hualogin1.bsc.es glogin1.bsc.es glogin2.bsc.es fpgalogin1.bsc.es
-            ProxyCommand nc -X connect -x hut:23080 %h %p
-          EOF
-          cat >> "$HOME/.ssh/known_hosts" << EOF
-          bscpm04.bsc.es ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIPx4mC0etyyjYUT2Ztc/bs4ZXSbVMrogs1ZTP924PDgT
-          gitlab-internal.bsc.es ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIF9arsAOSRB06hdy71oTvJHG2Mg8zfebADxpvc37lZo3
-          EOF
-          . ${pkgs.nix}/etc/profile.d/nix-daemon.sh
-          # Required to load SSL certificate paths
-          . ${pkgs.cacert}/nix-support/setup-hook
-        '';
-        environmentVariables = {
-          ENV = "/etc/profile";
-          USER = "root";
-          NIX_REMOTE = "daemon";
-          PATH = "${config.system.path}/bin:/bin:/sbin:/usr/bin:/usr/sbin";
-        };
-      };
-    };
-  };
-
-  # DOCKER* chains are useless, override at FORWARD and nixos-fw
-  networking.firewall.extraCommands = ''
-    # Don't forward any traffic from docker
-    iptables -I FORWARD 1 -p all -i docker0 -j nixos-fw-log-refuse
-
-    # Allow incoming traffic from docker to 23080
-    iptables -A nixos-fw -p tcp -i docker0 -d hut --dport 23080 -j ACCEPT
-  '';
-
-  #systemd.services.gitlab-runner.serviceConfig.Shell = "${pkgs.bash}/bin/bash";
-  systemd.services.gitlab-runner.serviceConfig.DynamicUser = lib.mkForce false;
-  systemd.services.gitlab-runner.serviceConfig.User = "gitlab-runner";
-  systemd.services.gitlab-runner.serviceConfig.Group = "gitlab-runner";
-  systemd.services.gitlab-runner.serviceConfig.ExecStart = lib.mkForce
-    ''${pkgs.gitlab-runner}/bin/gitlab-runner run --config ''${HOME}/.gitlab-runner/config.toml --listen-address "127.0.0.1:9252" --working-directory ''${HOME}'';
-
-  users.users.gitlab-runner = {
-    uid = config.ids.uids.gitlab-runner;
-    #isNormalUser = true;
-    home = "/var/lib/gitlab-runner";
-    description = "Gitlab Runner";
-    group = "gitlab-runner";
-    extraGroups = [ "docker" ];
-    createHome = true;
-  };
-  users.groups.gitlab-runner.gid = config.ids.gids.gitlab-runner;
-}
--- a/m/hut/gpfs-probe.nix
+++ b/m/hut/gpfs-probe.nix
@ -1,31 +0,0 @@
-{ pkgs, config, lib, ... }:
-let
-  gpfs-probe-script = pkgs.runCommand "gpfs-probe.sh" { }
-    ''
-      cp ${./gpfs-probe.sh} $out;
-      chmod +x $out
-    ''
-  ;
-in
-{
-  # Use a new user to handle the SSH keys
-  users.groups.ssh-robot = { };
-  users.users.ssh-robot = {
-    description = "SSH Robot";
-    isNormalUser = true;
-    home = "/var/lib/ssh-robot";
-  };
-
-  systemd.services.gpfs-probe = {
-    description = "Daemon to report GPFS latency via SSH";
-    path = [ pkgs.openssh pkgs.netcat ];
-    after = [ "network.target" ];
-    wantedBy = [ "default.target" ];
-    serviceConfig = {
-      Type = "simple";
-      ExecStart = "${pkgs.socat}/bin/socat TCP4-LISTEN:9966,fork EXEC:${gpfs-probe-script}";
-      User = "ssh-robot";
-      Group = "ssh-robot";
-    };
-  };
-}
--- a/m/hut/gpfs-probe.sh
+++ b/m/hut/gpfs-probe.sh
@ -1,18 +0,0 @@
-#!/bin/sh
-
-N=500
-
-t=$(timeout 5 ssh bsc015557@glogin2.bsc.es "timeout 3 command time -f %e touch /gpfs/projects/bsc15/bsc015557/gpfs.{1..$N} 2>&1; rm -f /gpfs/projects/bsc15/bsc015557/gpfs.{1..$N}")
-
-if [ -z "$t" ]; then
-  t="5.00"
-fi
-
-cat <<EOF
-HTTP/1.1 200 OK
-Content-Type: text/plain; version=0.0.4; charset=utf-8; escaping=values
-
-# HELP gpfs_touch_latency Time to create $N files.
-# TYPE gpfs_touch_latency gauge
-gpfs_touch_latency $t
-EOF
--- a/m/hut/monitoring.nix
+++ b/m/hut/monitoring.nix
@ -1,272 +0,0 @@
-{ config, lib, ... }:
-
-{
-  imports = [
-    ../module/slurm-exporter.nix
-    ../module/meteocat-exporter.nix
-    ../module/upc-qaire-exporter.nix
-    ./gpfs-probe.nix
-    ../module/nix-daemon-exporter.nix
-  ];
-
-  age.secrets.grafanaJungleRobotPassword = {
-    file = ../../secrets/jungle-robot-password.age;
-    owner = "grafana";
-    mode = "400";
-  };
-
-  age.secrets.ipmiYml.file = ../../secrets/ipmi.yml.age;
-
-  services.grafana = {
-    enable = true;
-    settings = {
-      server = {
-        domain = "jungle.bsc.es";
-        root_url = "%(protocol)s://%(domain)s/grafana";
-        serve_from_sub_path = true;
-        http_port = 2342;
-        http_addr = "127.0.0.1";
-      };
-      smtp = {
-        enabled = true;
-        from_address = "jungle-robot@bsc.es";
-        user = "jungle-robot";
-        # Read the password from a file, which is only readable by grafana user
-        # https://grafana.com/docs/grafana/latest/setup-grafana/configure-grafana/#file-provider
-        password = "$__file{${config.age.secrets.grafanaJungleRobotPassword.path}}";
-        host = "mail.bsc.es:465";
-        startTLS_policy = "NoStartTLS";
-      };
-      feature_toggles.publicDashboards = true;
-      "auth.anonymous".enabled = true;
-      log.level = "warn";
-    };
-  };
-
-  # Make grafana alerts also use the proxy
-  systemd.services.grafana.environment = config.networking.proxy.envVars;
-
-  services.prometheus = {
-    enable = true;
-    port = 9001;
-    retentionTime = "5y";
-    listenAddress = "127.0.0.1";
-  };
-
-  systemd.services.prometheus-ipmi-exporter.serviceConfig.DynamicUser = lib.mkForce false;
-  systemd.services.prometheus-ipmi-exporter.serviceConfig.PrivateDevices = lib.mkForce false;
-
-  # We need access to the devices to monitor the disk space
-  systemd.services.prometheus-node-exporter.serviceConfig.PrivateDevices = lib.mkForce false;
-  systemd.services.prometheus-node-exporter.serviceConfig.ProtectHome = lib.mkForce "read-only";
-
-  virtualisation.docker.daemon.settings = {
-    metrics-addr = "127.0.0.1:9323";
-  };
-
-  # Required to allow the smartctl exporter to read the nvme0 character device,
-  # see the commit message on:
-  # https://github.com/NixOS/nixpkgs/commit/12c26aca1fd55ab99f831bedc865a626eee39f80
-  services.udev.extraRules = ''
-    SUBSYSTEM=="nvme", KERNEL=="nvme[0-9]*", GROUP="disk"
-  '';
-
-  services.prometheus = {
-
-    exporters = {
-      ipmi = {
-        enable = true;
-        group = "root";
-        user = "root";
-        configFile = config.age.secrets.ipmiYml.path;
-        # extraFlags = [ "--log.level=debug" ];
-        listenAddress = "127.0.0.1";
-      };
-      node = {
-        enable = true;
-        enabledCollectors = [ "systemd" "logind" ];
-        port = 9002;
-        listenAddress = "127.0.0.1";
-      };
-      smartctl = {
-        enable = true;
-        listenAddress = "127.0.0.1";
-      };
-      blackbox = {
-        enable = true;
-        listenAddress = "127.0.0.1";
-        configFile = ./blackbox.yml;
-      };
-    };
-
-    scrapeConfigs = [
-      {
-        job_name = "xeon07";
-        static_configs = [{
-          targets = [
-            "127.0.0.1:${toString config.services.prometheus.exporters.node.port}"
-            "127.0.0.1:${toString config.services.prometheus.exporters.ipmi.port}"
-            "127.0.0.1:9323"
-            "127.0.0.1:9252"
-            "127.0.0.1:${toString config.services.prometheus.exporters.smartctl.port}"
-            "127.0.0.1:9341" # Slurm exporter
-            "127.0.0.1:9966" # GPFS custom exporter
-            "127.0.0.1:9999" # Nix-daemon custom exporter
-            "127.0.0.1:9929" # Meteocat custom exporter
-            "127.0.0.1:9928" # UPC Qaire custom exporter
-            "127.0.0.1:${toString config.services.prometheus.exporters.blackbox.port}"
-          ];
-        }];
-      }
-      {
-        job_name = "ceph";
-        static_configs = [{
-          targets = [
-            "10.0.40.40:9283" # Ceph statistics
-            "10.0.40.40:9002" # Node exporter
-            "10.0.40.42:9002" # Node exporter
-          ];
-        }];
-      }
-      {
-        job_name = "blackbox-http";
-        metrics_path = "/probe";
-        params = { module = [ "http_2xx" ]; };
-        static_configs = [{
-          targets = [
-            "https://www.google.com/robots.txt"
-            "https://pm.bsc.es/"
-            "https://pm.bsc.es/gitlab/"
-            "https://jungle.bsc.es/"
-            "https://gitlab.bsc.es/"
-          ];
-        }];
-        relabel_configs = [
-          {
-            # Takes the address and sets it in the "target=<xyz>" URL parameter
-            source_labels = [ "__address__" ];
-            target_label = "__param_target";
-          }
-          {
-            # Sets the "instance" label with the remote host we are querying
-            source_labels = [ "__param_target" ];
-            target_label = "instance";
-          }
-          {
-            # Shows the host target address instead of the blackbox address
-            target_label = "__address__";
-            replacement = "127.0.0.1:${toString config.services.prometheus.exporters.blackbox.port}";
-          }
-        ];
-      }
-      {
-        job_name = "blackbox-icmp";
-        metrics_path = "/probe";
-        params = { module = [ "icmp" ]; };
-        static_configs = [{
-          targets = [
-            "1.1.1.1"
-            "8.8.8.8"
-            "ssfhead"
-            "anella-bsc.cesca.cat"
-            "upc-anella.cesca.cat"
-            "fox.ac.upc.edu"
-            "arenys5.ac.upc.edu"
-          ];
-        }];
-        relabel_configs = [
-          {
-            # Takes the address and sets it in the "target=<xyz>" URL parameter
-            source_labels = [ "__address__" ];
-            target_label = "__param_target";
-          }
-          {
-            # Sets the "instance" label with the remote host we are querying
-            source_labels = [ "__param_target" ];
-            target_label = "instance";
-          }
-          {
-            # Shows the host target address instead of the blackbox address
-            target_label = "__address__";
-            replacement = "127.0.0.1:${toString config.services.prometheus.exporters.blackbox.port}";
-          }
-        ];
-      }
-      {
-        job_name = "gitea";
-        static_configs = [{ targets = [ "127.0.0.1:3000" ]; }];
-      }
-      {
-        # Scrape the IPMI info of the hosts remotely via LAN
-        job_name = "ipmi-lan";
-        scrape_interval = "1m";
-        scrape_timeout = "30s";
-        metrics_path = "/ipmi";
-        scheme = "http";
-        relabel_configs = [
-          {
-            # Takes the address and sets it in the "target=<xyz>" URL parameter
-            source_labels = [ "__address__" ];
-            separator = ";";
-            regex = "(.*)(:80)?";
-            target_label = "__param_target";
-            replacement = "\${1}";
-            action = "replace";
-          }
-          {
-            # Sets the "instance" label with the remote host we are querying
-            source_labels = [ "__param_target" ];
-            separator = ";";
-            regex = "(.*)-ipmi"; # Remove "-ipm̀i" at the end
-            target_label = "instance";
-            replacement = "\${1}";
-            action = "replace";
-          }
-          {
-            # Sets the fixed "module=lan" URL param
-            separator = ";";
-            regex = "(.*)";
-            target_label = "__param_module";
-            replacement = "lan";
-            action = "replace";
-          }
-          {
-            # Sets the target to query as the localhost IPMI exporter
-            separator = ";";
-            regex = ".*";
-            target_label = "__address__";
-            replacement = "127.0.0.1:9290";
-            action = "replace";
-          }
-        ];
-
-        # Load the list of targets from another file
-        file_sd_configs = [
-          {
-            files = [ "${./targets.yml}" ];
-            refresh_interval = "30s";
-          }
-        ];
-      }
-      {
-        job_name = "ipmi-raccoon";
-        metrics_path = "/ipmi";
-        static_configs = [
-          { targets = [ "127.0.0.1:9291" ]; }
-        ];
-        params = {
-          target = [ "84.88.51.142" ];
-          module = [ "raccoon" ];
-        };
-      }
-      {
-        job_name = "raccoon";
-        static_configs = [
-          {
-            targets = [ "127.0.0.1:19002" ]; # Node exporter
-          }
-        ];
-      }
-    ];
-  };
-}
--- a/m/hut/msmtp.nix
+++ b/m/hut/msmtp.nix
@ -1,24 +0,0 @@
-{ config, lib, ... }:
-{
-  age.secrets.jungleRobotPassword = {
-    file = ../../secrets/jungle-robot-password.age;
-    group = "gitea";
-    mode = "440";
-  };
-
-  programs.msmtp = {
-    enable = true;
-    accounts = {
-      default = {
-        auth = true;
-        tls = true;
-        tls_starttls = false;
-        port = 465;
-        host = "mail.bsc.es";
-        user = "jungle-robot";
-        passwordeval = "cat ${config.age.secrets.jungleRobotPassword.path}";
-        from = "jungle-robot@bsc.es";
-      };
-    };
-  };
-}
--- a/m/hut/nfs.nix
+++ b/m/hut/nfs.nix
@ -1,9 +0,0 @@
-{ ... }:
-
-{
-  services.nfs.server.enable = true;
-  services.nfs.server.exports = ''
-    /nix 10.0.40.0/24(ro,sync,no_subtree_check,root_squash)
-  '';
-  networking.firewall.allowedTCPPorts = [ 2049 ];
-}
--- a/m/hut/nginx.nix
+++ b/m/hut/nginx.nix
@ -1,76 +0,0 @@
-{ theFlake, pkgs, ... }:
-let
-  website = pkgs.stdenv.mkDerivation {
-    name = "jungle-web";
-    src = pkgs.fetchgit {
-      url = "https://jungle.bsc.es/git/rarias/jungle-website.git";
-      rev = "739bf0175a7f05380fe7ad7023ff1d60db1710e1";
-      hash = "sha256-ea5DzhYTzZ9TmqD+x95rdNdLbxPnBluqlYH2NmBYmc4=";
-    };
-    buildInputs = [ pkgs.hugo ];
-    buildPhase = ''
-      rm -rf public/
-      hugo
-    '';
-    installPhase = ''
-      cp -r public $out
-    '';
-    # Don't mess doc/
-    dontFixup = true;
-  };
-in
-{
-  networking.firewall.allowedTCPPorts = [ 80 ];
-  services.nginx = {
-    enable = true;
-    virtualHosts."jungle.bsc.es" = {
-      root = "${website}";
-      listen = [
-        {
-          addr = "0.0.0.0";
-          port = 80;
-        }
-      ];
-      extraConfig = ''
-        set_real_ip_from 127.0.0.1;
-        set_real_ip_from 84.88.52.107;
-        real_ip_recursive on;
-        real_ip_header X-Forwarded-For;
-
-        location /git {
-          rewrite ^/git$ / break;
-          rewrite ^/git/(.*) /$1 break;
-          proxy_pass http://127.0.0.1:3000;
-          proxy_redirect http:// $scheme://;
-        }
-        location /cache {
-          rewrite ^/cache/(.*) /$1 break;
-          proxy_pass http://127.0.0.1:5000;
-          proxy_redirect http:// $scheme://;
-        }
-        location /lists {
-          proxy_pass http://127.0.0.1:8081;
-          proxy_redirect http:// $scheme://;
-        }
-        location /grafana {
-          proxy_pass http://127.0.0.1:2342;
-          proxy_redirect http:// $scheme://;
-          proxy_set_header Host $host;
-          # Websockets
-          proxy_http_version 1.1;
-          proxy_set_header Upgrade $http_upgrade;
-          proxy_set_header Connection "upgrade";
-        }
-        location ~ ^/~(.+?)(/.*)?$ {
-          alias /ceph/home/$1/public_html$2;
-          index  index.html index.htm;
-          autoindex on;
-          absolute_redirect off;
-        }
-        location /p/ {
-          alias /ceph/p/;
-        }
-      '';
-    };
-  };
-}
--- a/m/hut/nix-serve.nix
+++ b/m/hut/nix-serve.nix
@ -1,16 +0,0 @@
-{ config, ... }:
-
-{
-  age.secrets.nixServe.file = ../../secrets/nix-serve.age;
-
-  services.nix-serve = {
-    enable = true;
-    # Only listen locally, as we serve it via ssh
-    bindAddress = "127.0.0.1";
-    port = 5000;
-
-    secretKeyFile = config.age.secrets.nixServe.path;
-    # Public key:
-    # jungle.bsc.es:pEc7MlAT0HEwLQYPtpkPLwRsGf80ZI26aj29zMw/HH0=
-  };
-}
--- a/m/hut/p.nix
+++ b/m/hut/p.nix
@ -1,43 +0,0 @@
-{ pkgs, lib, config, ... }:
-let
-  p = pkgs.writeShellScriptBin "p" ''
-    set -e
-    cd /ceph
-    pastedir="p/$USER"
-    mkdir -p "$pastedir"
-
-    ext="txt"
-
-    if [ -n "$1" ]; then
-      ext="$1"
-    fi
-
-    out=$(mktemp "$pastedir/XXXXXXXX.$ext")
-
-    cat > "$out"
-    chmod go+r "$out"
-    echo "https://jungle.bsc.es/$out"
-  '';
-in
-{
-  environment.systemPackages = with pkgs; [ p ];
-
-  # Make sure we have a directory per user. We cannot use the nice
-  # systemd-tmpfiles-setup.service service because this is a remote FS, and it
-  # may not be mounted when it runs.
-  systemd.services.create-paste-dirs = let
-    # Take only normal users in hut
-    users = lib.filterAttrs (_: v: v.isNormalUser) config.users.users;
-    commands = lib.concatLists (lib.mapAttrsToList
-      (_: user: [
-        "install -d -o ${user.name} -g ${user.group} -m 0755 /ceph/p/${user.name}"
-      ]) users);
-    script = pkgs.writeShellScript "create-paste-dirs.sh" (lib.concatLines commands);
-  in {
-    enable = true;
-    wants = [ "remote-fs.target" ];
-    after = [ "remote-fs.target" ];
-    wantedBy = [ "multi-user.target" ];
-    serviceConfig.ExecStart = script;
-  };
-}
--- a/m/hut/postgresql.nix
+++ b/m/hut/postgresql.nix
@ -1,19 +0,0 @@
-{ lib, ... }:
-
-{
-  services.postgresql = {
-    enable = true;
-    ensureDatabases = [ "perftestsdb" ];
-    ensureUsers = [
-      { name = "anavarro"; ensureClauses.superuser = true; }
-      { name = "rarias";   ensureClauses.superuser = true; }
-      { name = "grafana"; }
-    ];
-    authentication = ''
-      #type  database     DBuser    auth-method
-      local  perftestsdb  rarias    trust
-      local  perftestsdb  anavarro  trust
-      local  perftestsdb  grafana   trust
-    '';
-  };
-}
--- a/m/hut/public-inbox.css
+++ b/m/hut/public-inbox.css
@ -1,79 +0,0 @@
-/*
- * CC0-1.0 <https://creativecommons.org/publicdomain/zero/1.0/legalcode>
- * Dark color scheme using 216 web-safe colors, inspired
- * somewhat by the default color scheme in mutt.
- * It reduces eyestrain for me, and energy usage for all:
- * https://en.wikipedia.org/wiki/Light-on-dark_color_scheme
- */
-
-* {
-	font-size: 14px;
-	font-family: monospace;
-}
-
-pre {
-	white-space: pre-wrap;
-	padding: 10px;
-	background: #f5f5f5;
-}
-
-hr {
-	margin: 30px 0;
-}
-
-body {
-	max-width: 120ex; /* 120 columns wide */
-	margin: 50px auto;
-}
-
-/*
- * Underlined links add visual noise which make them hard-to-read.
- * Use colors to make them stand out, instead.
- */
-a:link {
-	color: #007;
-	text-decoration: none;
-}
-a:visited {
-	color:#504;
-}
-a:hover {
-	text-decoration: underline;
-}
-
-/* quoted text in emails gets a different color */
-*.q { color:gray }
-
-/*
- * these may be used with cgit <https://git.zx2c4.com/cgit/>, too.
- * (cgit uses <div>, public-inbox uses <span>)
- */
-*.add { color:darkgreen } /* diff post-image lines */
-*.del { color:darkred } /* diff pre-image lines */
-*.head { color:black } /* diff header (metainformation) */
-*.hunk { color:gray } /* diff hunk-header */
-
-/*
- * highlight 3.x colors (tested 3.18) for displaying blobs.
- * This doesn't use most of the colors available, as I find too
- * many colors overwhelming, so the default is commented out.
- */
-.hl.num { color:#f30 } /* number */
-.hl.esc { color:#f0f } /* escape character */
-.hl.str { color:#f30 } /* string */
-.hl.ppc { color:#f0f } /* preprocessor */
-.hl.pps { color:#f30 } /* preprocessor string */
-.hl.slc { color:#09f } /* single-line comment */
-.hl.com { color:#09f } /* multi-line comment */
-/* .hl.opt { color:#ccc } */ /* operator */
-/* .hl.ipl { color:#ccc } */ /* interpolation */
-
-/* keyword groups kw[a-z] */
-.hl.kwa { color:#ff0 }
-.hl.kwb { color:#0f0 }
-.hl.kwc { color:#ff0 }
-/* .hl.kwd { color:#ccc } */
-
-/* line-number (unused by public-inbox) */
-/* .hl.lin { color:#ccc } */
-
--- a/m/hut/public-inbox.nix
+++ b/m/hut/public-inbox.nix
@ -1,47 +0,0 @@
-{ lib, ... }:
-
-{
-  services.public-inbox = {
-    enable = true;
-    http = {
-      enable = true;
-      port = 8081;
-      mounts = [ "/lists" ];
-    };
-    settings.publicinbox = {
-      css = [ "${./public-inbox.css}" ];
-      wwwlisting = "all";
-    };
-    inboxes = {
-      bscpkgs = {
-        url = "https://jungle.bsc.es/lists/bscpkgs";
-        address = [ "~rodarima/bscpkgs@lists.sr.ht" ];
-        watch = [ "imaps://jungle-robot%40gmx.com@imap.gmx.com/INBOX" ];
-        description = "Patches for bscpkgs";
-        listid = "~rodarima/bscpkgs.lists.sr.ht";
-      };
-      jungle = {
-        url = "https://jungle.bsc.es/lists/jungle";
-        address = [ "~rodarima/jungle@lists.sr.ht" ];
-        watch = [ "imaps://jungle-robot%40gmx.com@imap.gmx.com/INBOX" ];
-        description = "Patches for jungle";
-        listid = "~rodarima/jungle.lists.sr.ht";
-      };
-    };
-  };
-
-  # We need access to the network for the watch service, as we will fetch the
-  # emails directly from the IMAP server.
-  systemd.services.public-inbox-watch.serviceConfig = {
-    PrivateNetwork = lib.mkForce false;
-    RestrictAddressFamilies = lib.mkForce [ "AF_UNIX"  "AF_INET" "AF_INET6" ];
-    KillSignal = "SIGKILL"; # Avoid slow shutdown
-
-    # Required for chmod(..., 02750) on directories by git, from
-    # systemd.exec(8):
-    # > Note that this restricts marking of any type of file system object with
-    # > these bits, including both regular files and directories (where the SGID
-    # > is a different meaning than for files, see documentation).
-    RestrictSUIDSGID = lib.mkForce false;
-  };
-}
--- a/m/hut/pxe.nix
+++ b/m/hut/pxe.nix
@ -1,35 +0,0 @@
-{ theFlake, pkgs, ... }:
-
-# This module describes a script that can launch the pixiecore daemon to serve a
-# NixOS image via PXE to a node to directly boot from there, without requiring a
-# working disk.
-
-let
-  # The host config must have the netboot-minimal.nix module too
-  host = theFlake.nixosConfigurations.lake2;
-  sys = host.config.system;
-  build = sys.build;
-  kernel = "${build.kernel}/bzImage";
-  initrd = "${build.netbootRamdisk}/initrd";
-  init = "${build.toplevel}/init";
-
-  script = pkgs.writeShellScriptBin "pixiecore-helper" ''
-    #!/usr/bin/env bash -x
-
-    ${pkgs.pixiecore}/bin/pixiecore \
-      boot ${kernel} ${initrd} --cmdline "init=${init} loglevel=4" \
-      --debug --dhcp-no-bind --port 64172 --status-port 64172 "$@"
-  '';
-in
-{
-  ## We need a DHCP server to provide the IP
-  #services.dnsmasq = {
-  #  enable = true;
-  #  settings = {
-  #    domain-needed = true;
-  #    dhcp-range = [ "192.168.0.2,192.168.0.254" ];
-  #  };
-  #};
-
-  environment.systemPackages = [ script ];
-}
--- a/m/hut/targets.yml
+++ b/m/hut/targets.yml
@ -1,15 +0,0 @@
- targets:
-  - owl1-ipmi
-  - owl2-ipmi
-  - xeon03-ipmi
-  - xeon04-ipmi
-  - koro-ipmi
-  - weasel-ipmi
-  - hut-ipmi
-  - eudy-ipmi
-  # Storage
-  - bay-ipmi
-  - oss01-ipmi
-  - lake2-ipmi
-  labels:
-    job: ipmi-lan
--- a/m/koro/configuration.nix
+++ b/m/koro/configuration.nix
@ -1,35 +0,0 @@
-{ config, pkgs, lib, modulesPath, ... }:
-
-{
-  imports = [
-    ../common/ssf.nix
-    #(modulesPath + "/installer/netboot/netboot-minimal.nix")
-
-    ../eudy/cpufreq.nix
-    ../eudy/users.nix
-    ./kernel.nix
-  ];
-
-  # Select this using the ID to avoid mismatches
-  boot.loader.grub.device = "/dev/disk/by-id/wwn-0x55cd2e414d5376d2";
-
-  # disable automatic garbage collector
-  nix.gc.automatic = lib.mkForce false;
-
-  # members of the tracing group can use the lttng-provided kernel events
-  # without root permissions
-  users.groups.tracing.members = [ "arocanon" "vlopez" ];
-
-  # set up both ethernet and infiniband ips
-  networking = {
-    hostName = "koro";
-    interfaces.eno1.ipv4.addresses = [ {
-      address = "10.0.40.5";
-      prefixLength = 24;
-    } ];
-    interfaces.ibp5s0.ipv4.addresses = [ {
-      address = "10.0.42.5";
-      prefixLength = 24;
-    } ];
-  };
-}
--- a/m/koro/kernel.nix
+++ b/m/koro/kernel.nix
@ -1,70 +0,0 @@
-{ pkgs, lib, ... }:
-
-let
-  #fcs-devel = pkgs.linuxPackages_custom {
-  #   version = "6.2.8";
-  #   src = /mnt/data/kernel/fcs/kernel/src;
-  #   configfile = /mnt/data/kernel/fcs/kernel/configs/defconfig;
-  #};
-
-  #fcsv1 = fcs-kernel "bc11660676d3d68ce2459b9fb5d5e654e3f413be" false;
-  #fcsv2 = fcs-kernel "db0f2eca0cd57a58bf456d7d2c7d5d8fdb25dfb1" false;
-  #fcsv1-lockdep = fcs-kernel "bc11660676d3d68ce2459b9fb5d5e654e3f413be" true;
-  #fcsv2-lockdep = fcs-kernel "db0f2eca0cd57a58bf456d7d2c7d5d8fdb25dfb1" true;
-  #fcs-kernel = gitCommit: lockdep: pkgs.linuxPackages_custom {
-  #   version = "6.2.8";
-  #   src = builtins.fetchGit {
-  #     url = "git@bscpm03.bsc.es:ompss-kernel/linux.git";
-  #     rev = gitCommit;
-  #     ref = "fcs";
-  #   };
-  #   configfile = if lockdep then ./configs/lockdep else ./configs/defconfig;
-  #};
-
-  kernel = nixos-fcs;
-
-  nixos-fcs-kernel = lib.makeOverridable ({gitCommit, lockStat ? false, preempt ? false, branch ? "fcs"}: pkgs.linuxPackagesFor (pkgs.buildLinux rec {
-    version = "6.2.8";
-    src = builtins.fetchGit {
-      url = "git@bscpm03.bsc.es:ompss-kernel/linux.git";
-      rev = gitCommit;
-      ref = branch;
-    };
-    structuredExtraConfig = with lib.kernel; {
-      # add general custom kernel options here
-    } // lib.optionalAttrs lockStat {
-      LOCK_STAT = yes;
-    } // lib.optionalAttrs preempt {
-      PREEMPT = lib.mkForce yes;
-      PREEMPT_VOLUNTARY = lib.mkForce no;
-    };
-    kernelPatches = [];
-    extraMeta.branch = lib.versions.majorMinor version;
-  }));
-
-  nixos-fcs = nixos-fcs-kernel {gitCommit = "8a09822dfcc8f0626b209d6d2aec8b5da459dfee";};
-  nixos-fcs-lockstat = nixos-fcs.override {
-    lockStat = true;
-  };
-  nixos-fcs-lockstat-preempt = nixos-fcs.override {
-    lockStat = true;
-    preempt = true;
-  };
-  latest = pkgs.linuxPackages_latest;
-
-in {
-  imports = [
-    ../eudy/kernel/lttng.nix
-    ../eudy/kernel/perf.nix
-  ];
-  boot.kernelPackages = lib.mkForce kernel;
-
-  # disable all cpu mitigations
-  boot.kernelParams = [
-    "mitigations=off"
-  ];
-  
-  # enable memory overcommit, needed to build a taglibc system using nix after
-  # increasing the openblas memory footprint
-  boot.kernel.sysctl."vm.overcommit_memory" = 1;
-}
--- a/m/lake2/configuration.nix
+++ b/m/lake2/configuration.nix
@ -1,84 +0,0 @@
-{ config, pkgs, lib, modulesPath, ... }:
-
-{
-  imports = [
-    ../common/ssf.nix
-    ../module/monitoring.nix
-    ../module/hut-substituter.nix
-  ];
-
-  boot.loader.grub.device = "/dev/disk/by-id/wwn-0x55cd2e414d53563a";
-
-  boot.kernel.sysctl = {
-    "kernel.yama.ptrace_scope" = lib.mkForce "1";
-  };
-
-  environment.systemPackages = with pkgs; [
-    ceph
-  ];
-
-  services.ceph = {
-    enable = true;
-    global = {
-      fsid = "9c8d06e0-485f-4aaf-b16b-06d6daf1232b";
-      monHost = "10.0.40.40";
-      monInitialMembers = "bay";
-      clusterNetwork = "10.0.40.40/24"; # Use Ethernet only
-    };
-    osd = {
-      enable = true;
-      # One daemon per NVME disk
-      daemons = [ "4" "5" "6" "7" ];
-      extraConfig = {
-        "osd crush chooseleaf type" = "0";
-        "osd journal size" = "10000";
-        "osd pool default min size" = "2";
-        "osd pool default pg num" = "200";
-        "osd pool default pgp num" = "200";
-        "osd pool default size" = "3";
-      };
-    };
-  };
-
-  networking = {
-    hostName = "lake2";
-    interfaces.eno1.ipv4.addresses = [ {
-      address = "10.0.40.42";
-      prefixLength = 24;
-    } ];
-    interfaces.ibp5s0.ipv4.addresses = [ {
-      address = "10.0.42.42";
-      prefixLength = 24;
-    } ];
-    firewall = {
-      extraCommands = ''
-        # Accept all incoming TCP traffic from bay
-        iptables -A nixos-fw -p tcp -s bay -j nixos-fw-accept
-        # Accept monitoring requests from hut
-        iptables -A nixos-fw -p tcp -s hut --dport 9002 -j nixos-fw-accept
-        # Accept all Ceph traffic from the local network
-        iptables -A nixos-fw -p tcp -s 10.0.40.0/24 -m multiport --dport 3300,6789,6800:7568 -j nixos-fw-accept
-      '';
-    };
-  };
-
-  # Missing service for volumes, see:
-  # https://www.reddit.com/r/ceph/comments/14otjyo/comment/jrd69vt/
-  systemd.services.ceph-volume = {
-    enable = true;
-    description = "Ceph Volume activation";
-    unitConfig = {
-      Type = "oneshot";
-      After = "local-fs.target";
-      Wants = "local-fs.target";
-    };
-    path = [ pkgs.ceph pkgs.util-linux pkgs.lvm2 pkgs.cryptsetup ];
-    serviceConfig = {
-      KillMode = "none";
-      Environment = "CEPH_VOLUME_TIMEOUT=10000";
-      ExecStart = "/bin/sh -c 'timeout $CEPH_VOLUME_TIMEOUT ${pkgs.ceph}/bin/ceph-volume lvm activate --all --no-systemd'";
-      TimeoutSec = "0";
-    };
-    wantedBy = [ "multi-user.target" ];
-  };
-}
--- a/m/map.nix
+++ b/m/map.nix
@ -1,70 +0,0 @@
-{
-  # In physical order from top to bottom (see note below)
-  ssf = {
-    # Switches for Ethernet and OmniPath
-    switch-C6-S1A-05 = { pos=42; size=1; model="Dell S3048-ON"; };
-    switch-opa = { pos=41; size=1; };
-
-    # SSF login
-    apex = { pos=39; size=2; label="SSFHEAD"; board="R2208WTTYSR"; contact="rodrigo.arias@bsc.es"; };
-
-    # Storage
-    bay   = { pos=38; size=1; label="MDS01"; board="S2600WT2R"; sn="BQWL64850303"; contact="rodrigo.arias@bsc.es"; };
-    lake1 = { pos=37; size=1; label="OSS01"; board="S2600WT2R"; sn="BQWL64850234"; contact="rodrigo.arias@bsc.es"; };
-    lake2 = { pos=36; size=1; label="OSS02"; board="S2600WT2R"; sn="BQWL64850266"; contact="rodrigo.arias@bsc.es"; };
-
-    # Compute xeon
-    owl1   = { pos=35; size=1; label="SSF-XEON01"; board="S2600WTTR"; sn="BQWL64954172"; contact="rodrigo.arias@bsc.es"; };
-    owl2   = { pos=34; size=1; label="SSF-XEON02"; board="S2600WTTR"; sn="BQWL64756560"; contact="rodrigo.arias@bsc.es"; };
-    xeon03 = { pos=33; size=1; label="SSF-XEON03"; board="S2600WTTR"; sn="BQWL64750826"; contact="rodrigo.arias@bsc.es"; };
-    # Slot 34 empty
-    koro   = { pos=31; size=1; label="SSF-XEON05"; board="S2600WTTR"; sn="BQWL64954293"; contact="rodrigo.arias@bsc.es"; };
-    weasel = { pos=30; size=1; label="SSF-XEON06"; board="S2600WTTR"; sn="BQWL64750846"; contact="antoni.navarro@bsc.es"; };
-    hut    = { pos=29; size=1; label="SSF-XEON07"; board="S2600WTTR"; sn="BQWL64751184"; contact="rodrigo.arias@bsc.es"; };
-    eudy   = { pos=28; size=1; label="SSF-XEON08"; board="S2600WTTR"; sn="BQWL64756586"; contact="aleix.rocanonell@bsc.es"; };
-
-    # 16 KNL nodes, 4 per chassis
-    knl01_04 = { pos=26; size=2; label="KNL01..KNL04"; board="HNS7200APX"; };
-    knl05_08 = { pos=24; size=2; label="KNL05..KNL18"; board="HNS7200APX"; };
-    knl09_12 = { pos=22; size=2; label="KNL09..KNL12"; board="HNS7200APX"; };
-    knl13_16 = { pos=20; size=2; label="KNL13..KNL16"; board="HNS7200APX"; };
-
-    # Slot 19 empty
-
-    # EPI (hw team, guessed order)
-    epi01 = { pos=18; size=1; contact="joan.cabre@bsc.es"; };
-    epi02 = { pos=17; size=1; contact="joan.cabre@bsc.es"; };
-    epi03 = { pos=16; size=1; contact="joan.cabre@bsc.es"; };
-    anon  = { pos=14; size=2; }; # Unlabeled machine. Operative
-
-    # These are old and decommissioned (off)
-    power8    = { pos=12; size=2; label="BSCPOWER8N3";   decommissioned=true; };
-    powern1   = { pos=8;  size=4; label="BSCPOWERN1";    decommissioned=true; };
-    gustafson = { pos=7;  size=1; label="gustafson";     decommissioned=true; };
-    odap01    = { pos=3;  size=4; label="ODAP01";        decommissioned=true; };
-    amhdal    = { pos=2;  size=1; label="AMHDAL";        decommissioned=true; }; # sic
-    moore     = { pos=1;  size=1; label="moore (earth)"; decommissioned=true; };
-  };
-
-  bsc2218 = {
-    raccoon = { board="W2600CR"; sn="QSIP22500829"; contact="rodrigo.arias@bsc.es"; };
-    tent    = { label="SSF-XEON04"; board="S2600WTTR"; sn="BQWL64751229"; contact="rodrigo.arias@bsc.es"; };
-  };
-
-  upc = {
-    fox = { board="H13DSG-O-CPU"; sn="UM24CS600392"; prod="AS-4125GS-TNRT"; prod_sn="E508839X5103339"; contact="rodrigo.arias@bsc.es"; };
-  };
-
-  # NOTE: Position is specified in "U" units (44.45 mm) and starts at 1 from the
-  # bottom. Example:
-  #
-  #  |   ...  | - [pos+size] <--- Label in chassis
-  #  +--------+
-  #  |  node  | - [pos+1]
-  #  |   2U   | - [pos]
-  #  +------- +
-  #  |   ...  | - [pos-1]
-  #
-  # NOTE: The board and sn refers to the FRU information (Board Product and
-  # Board Serial) via `ipmitool fru print 0`.
-}
--- a/m/module/amd-uprof.nix
+++ b/m/module/amd-uprof.nix
@ -1,49 +0,0 @@
-{ config, lib, pkgs, ... }:
-
-{
-  options = {
-    services.amd-uprof = {
-      enable = lib.mkOption {
-        type = lib.types.bool;
-        default = false;
-        description = "Whether to enable AMD uProf.";
-      };
-    };
-  };
-
-  # Only setup amd-uprof if enabled
-  config = lib.mkIf config.services.amd-uprof.enable {
-
-    # First make sure that we add the module to the list of available modules
-    # in the kernel matching the same kernel version of this configuration.
-    boot.extraModulePackages = with config.boot.kernelPackages; [ amd-uprof-driver ];
-    boot.kernelModules = [ "AMDPowerProfiler" ];
-
-    # Make the userspace tools available in $PATH.
-    environment.systemPackages = with pkgs; [ amd-uprof ];
-
-    # The AMDPowerProfiler module doesn't create the /dev device nor it emits
-    # any uevents, so we cannot use udev rules to automatically create the
-    # device. Instead, we run a systemd unit that does it after loading the
-    # modules.
-    systemd.services.amd-uprof-device = {
-      description = "Create /dev/AMDPowerProfiler device";
-      after = [ "systemd-modules-load.service" ];
-      wantedBy = [ "multi-user.target" ];
-      unitConfig.ConditionPathExists = [
-          "/proc/AMDPowerProfiler/device"
-          "!/dev/AMDPowerProfiler"
-      ];
-      serviceConfig = {
-        Type = "oneshot";
-        RemainAfterExit = true;
-        ExecStart = pkgs.writeShellScript "add-amd-uprof-dev.sh" ''
-          mknod /dev/AMDPowerProfiler -m 666 c $(< /proc/AMDPowerProfiler/device) 0
-        '';
-        ExecStop = pkgs.writeShellScript "remove-amd-uprof-dev.sh" ''
-          rm -f /dev/AMDPowerProfiler
-        '';
-      };
-    };
-  };
-}
--- a/m/module/ceph.nix
+++ b/m/module/ceph.nix
@ -1,24 +0,0 @@
-{ config, pkgs, ... }:
-
-# Mounts the /ceph filesystem at boot
-{
-  environment.systemPackages = with pkgs; [
-    ceph-client
-    fio # For benchmarks
-  ];
-
-  # We need the ceph module loaded as the mount.ceph binary fails to run the
-  # modprobe command.
-  boot.kernelModules = [ "ceph" ];
-
-  age.secrets.cephUser.file = ../../secrets/ceph-user.age;
-
-  fileSystems."/ceph" = {
-    fsType = "ceph";
-    device = "user@9c8d06e0-485f-4aaf-b16b-06d6daf1232b.cephfs=/";
-    options = [
-      "mon_addr=10.0.40.40"
-      "secretfile=${config.age.secrets.cephUser.path}"
-    ];
-  };
-}
--- a/m/module/debuginfod.nix
+++ b/m/module/debuginfod.nix
@ -1,3 +0,0 @@
-{
-  services.nixseparatedebuginfod.enable = true;
-}
--- a/m/module/emulation.nix
+++ b/m/module/emulation.nix
@ -1,3 +0,0 @@
-{
-  boot.binfmt.emulatedSystems = [ "armv7l-linux" "aarch64-linux" "powerpc64le-linux" "riscv64-linux" ];
-}
--- a/m/module/hut-substituter.nix
+++ b/m/module/hut-substituter.nix
@ -1,13 +0,0 @@
-{ config, ... }:
-{
-  nix.settings =
-    # Don't add hut as a cache to itself
-    assert config.networking.hostName != "hut";
-    {
-      extra-substituters = [ "http://hut/cache" ];
-      extra-trusted-public-keys = [ "jungle.bsc.es:pEc7MlAT0HEwLQYPtpkPLwRsGf80ZI26aj29zMw/HH0=" ];
-
-      # Set a low timeout in case hut is down
-      connect-timeout = 3; # seconds
-    };
-}
--- a/m/module/jungle-users.nix
+++ b/m/module/jungle-users.nix
@ -1,24 +0,0 @@
-{ config, lib, ... }:
-
-with lib;
-
-{
-  options = {
-    users.jungleUsers = mkOption {
-      type = types.attrsOf (types.anything // { check = (x: x ? "hosts"); });
-      description = ''
-        Same as users.users but with the extra `hosts` attribute, which controls
-        access to the nodes by `networking.hostName`.
-      '';
-    };
-  };
-
-  config = let
-    allowedUser = host: userConf: builtins.elem host userConf.hosts;
-    filterUsers = host: users: filterAttrs (n: v: allowedUser host v) users;
-    removeHosts = users: mapAttrs (n: v: builtins.removeAttrs v [ "hosts" ]) users;
-    currentHost = config.networking.hostName;
-  in {
-    users.users = removeHosts (filterUsers currentHost config.users.jungleUsers);
-  };
-}
--- a/m/module/meteocat-exporter.nix
+++ b/m/module/meteocat-exporter.nix
@ -1,17 +0,0 @@
-{ config, lib, pkgs, ... }:
-
-with lib;
-
-{
-  systemd.services."prometheus-meteocat-exporter" = {
-    wantedBy = [ "multi-user.target" ];
-    after = [ "network.target" ];
-    serviceConfig = {
-      Restart = mkDefault "always";
-      PrivateTmp = mkDefault true;
-      WorkingDirectory = mkDefault "/tmp";
-      DynamicUser = mkDefault true;
-      ExecStart = "${pkgs.meteocat-exporter}/bin/meteocat-exporter";
-    };
-  };
-}
--- a/m/module/monitoring.nix
+++ b/m/module/monitoring.nix
@ -1,25 +0,0 @@
-{ config, lib, ... }:
-
-{
-  # We need access to the devices to monitor the disk space
-  systemd.services.prometheus-node-exporter.serviceConfig.PrivateDevices = lib.mkForce false;
-  systemd.services.prometheus-node-exporter.serviceConfig.ProtectHome = lib.mkForce "read-only";
-
-  # Required to allow the smartctl exporter to read the nvme0 character device,
-  # see the commit message on:
-  # https://github.com/NixOS/nixpkgs/commit/12c26aca1fd55ab99f831bedc865a626eee39f80
-  services.udev.extraRules = ''
-    SUBSYSTEM=="nvme", KERNEL=="nvme[0-9]*", GROUP="disk"
-  '';
-
-  services.prometheus = {
-    exporters = {
-      node = {
-        enable = true;
-        enabledCollectors = [ "systemd" ];
-        port = 9002;
-      };
-      smartctl.enable = true;
-    };
-  };
-}
--- a/m/module/nix-daemon-builds.sh
+++ b/m/module/nix-daemon-builds.sh
@ -1,26 +0,0 @@
-#!/bin/sh
-
-# Locate nix daemon pid
-nd=$(pgrep -o nix-daemon)
-
-# Locate children of nix-daemon
-pids1=$(tr ' ' '\n' < "/proc/$nd/task/$nd/children")
-
-# For each children, locate 2nd level children
-pids2=$(echo "$pids1" | xargs -I @ /bin/sh -c 'cat /proc/@/task/*/children' | tr ' ' '\n')
-
-cat <<EOF
-HTTP/1.1 200 OK
-Content-Type: text/plain; version=0.0.4; charset=utf-8; escaping=values
-
-# HELP nix_daemon_build Nix daemon derivation build state.
-# TYPE nix_daemon_build gauge
-EOF
-
-for pid in $pids2; do
-  name=$(cat /proc/$pid/environ 2>/dev/null | tr '\0' '\n' | rg "^name=(.+)" - --replace '$1' | tr -dc ' [:alnum:]_\-\.')
-  user=$(ps -o uname= -p "$pid")
-  if [ -n "$name" -a -n "$user" ]; then
-    printf 'nix_daemon_build{user="%s",name="%s"} 1\n' "$user" "$name"
-  fi
-done
--- a/m/module/nix-daemon-exporter.nix
+++ b/m/module/nix-daemon-exporter.nix
@ -1,23 +0,0 @@
-{ pkgs, config, lib, ... }:
-let
-  script = pkgs.runCommand "nix-daemon-exporter.sh" { }
-    ''
-      cp ${./nix-daemon-builds.sh} $out;
-      chmod +x $out
-    ''
-  ;
-in
-{
-  systemd.services.nix-daemon-exporter = {
-    description = "Daemon to export nix-daemon metrics";
-    path = [ pkgs.procps pkgs.ripgrep ];
-    wantedBy = [ "default.target" ];
-    serviceConfig = {
-      Type = "simple";
-      ExecStart = "${pkgs.socat}/bin/socat TCP4-LISTEN:9999,fork EXEC:${script}";
-      # Needed root to read the environment, potentially unsafe
-      User = "root";
-      Group = "root";
-    };
-  };
-}
--- a/m/module/nvidia.nix
+++ b/m/module/nvidia.nix
@ -1,20 +0,0 @@
-{ lib, config, pkgs, ... }:
-{
-  # Configure Nvidia driver to use with CUDA
-  hardware.nvidia.package = config.boot.kernelPackages.nvidiaPackages.production;
-  hardware.nvidia.open = lib.mkDefault (builtins.abort "hardware.nvidia.open not set");
-  hardware.graphics.enable = true;
-  nixpkgs.config.nvidia.acceptLicense = true;
-  services.xserver.videoDrivers = [ "nvidia" ];
-
-  # enable support for derivations which require nvidia-gpu to be available
-  # > requiredSystemFeatures = [ "cuda" ];
-  programs.nix-required-mounts.enable = true;
-  programs.nix-required-mounts.presets.nvidia-gpu.enable = true;
-  # They forgot to add the symlink
-  programs.nix-required-mounts.allowedPatterns.nvidia-gpu.paths = [
-    config.systemd.tmpfiles.settings.graphics-driver."/run/opengl-driver"."L+".argument
-  ];
-
-  environment.systemPackages = [ pkgs.cudainfo ];
-}
--- a/m/module/p.nix
+++ b/m/module/p.nix
@ -1,68 +0,0 @@
-{ config, lib, pkgs, ... }:
-
-let
-  cfg = config.services.p;
-in
-{
-  options = {
-    services.p = {
-      enable = lib.mkOption {
-        type = lib.types.bool;
-        default = false;
-        description = "Whether to enable the p service.";
-      };
-      path = lib.mkOption {
-        type = lib.types.str;
-        default = "/var/lib/p";
-        description = "Where to save the pasted files on disk.";
-      };
-      url = lib.mkOption {
-        type = lib.types.str;
-        default = "https://jungle.bsc.es/p";
-        description = "URL prefix for the printed file.";
-      };
-    };
-  };
-
-  config = lib.mkIf cfg.enable {
-    environment.systemPackages = let 
-      p = pkgs.writeShellScriptBin "p" ''
-        set -e
-        pastedir="${cfg.path}/$USER"
-        cd "$pastedir"
-
-        ext="txt"
-        if [ -n "$1" ]; then
-          ext="$1"
-        fi
-
-        out=$(mktemp "XXXXXXXX.$ext")
-        cat > "$out"
-        chmod go+r "$out"
-        echo "${cfg.url}/$USER/$out"
-      '';
-    in [ p ];
-
-    systemd.services.p = let
-      # Take only normal users
-      users = lib.filterAttrs (_: v: v.isNormalUser) config.users.users;
-      # Create a directory for each user
-      commands = lib.concatLists (lib.mapAttrsToList (_: user: [
-        "install -d -o ${user.name} -g ${user.group} -m 0755 ${cfg.path}/${user.name}"
-      ]) users);
-    in {
-      description = "P service setup";
-      requires = [ "network-online.target" ];
-      #wants = [ "remote-fs.target" ];
-      #after = [ "remote-fs.target" ];
-      wantedBy = [ "multi-user.target" ];
-      serviceConfig = {
-        ExecStart = pkgs.writeShellScript "p-init.sh" (''
-
-          install -d -o root -g root -m 0755 ${cfg.path}
-
-        '' + (lib.concatLines commands));
-      };
-    };
-  };
-}
--- a/m/module/power-policy.nix
+++ b/m/module/power-policy.nix
@ -1,33 +0,0 @@
-{ config, lib, pkgs, ... }:
-
-with lib;
-
-let
-  cfg = config.power.policy;
-in
-{
-  options = {
-    power.policy = mkOption {
-      type = types.nullOr (types.enum [ "always-on" "previous" "always-off" ]);
-      default = null;
-      description = "Set power policy to use via IPMI.";
-    };
-  };
-
-  config = mkIf (cfg != null) {
-    systemd.services."power-policy" = {
-      description = "Set power policy to use via IPMI";
-      wantedBy = [ "multi-user.target" ];
-      unitConfig = {
-        StartLimitBurst = "10";
-        StartLimitIntervalSec = "10m";
-      };
-      serviceConfig = {
-        ExecStart = "${pkgs.ipmitool}/bin/ipmitool chassis policy ${cfg}";
-        Type = "oneshot";
-        Restart = "on-failure";
-        RestartSec = "5s";
-      };
-    };
-  };
-}
--- a/m/module/slurm-client.nix
+++ b/m/module/slurm-client.nix
@ -1,24 +0,0 @@
-{ lib, ... }:
-
-{
-  imports = [
-    ./slurm-common.nix
-  ];
-
-  systemd.services.slurmd.serviceConfig = {
-    # Kill all processes in the control group on stop/restart. This will kill
-    # all the jobs running, so ensure that we only upgrade when the nodes are
-    # not in use. See:
-    # https://github.com/NixOS/nixpkgs/commit/ae93ed0f0d4e7be0a286d1fca86446318c0c6ffb
-    # https://bugs.schedmd.com/show_bug.cgi?id=2095#c24
-    KillMode = lib.mkForce "control-group";
-
-    # If slurmd fails to contact the control server it will fail, causing the
-    # node to remain out of service until manually restarted. Always try to
-    # restart it.
-    Restart = "always";
-    RestartSec = "30s";
-  };
-
-  services.slurm.client.enable = true;
-}
--- a/m/module/slurm-common.nix
+++ b/m/module/slurm-common.nix
@ -1,115 +0,0 @@
-{ config, pkgs, ... }:
-
-let
-  suspendProgram = pkgs.writeShellScript "suspend.sh" ''
-    exec 1>>/var/log/power_save.log 2>>/var/log/power_save.log
-    set -x
-    export "PATH=/run/current-system/sw/bin:$PATH"
-    echo "$(date) Suspend invoked $0 $*" >> /var/log/power_save.log
-    hosts=$(scontrol show hostnames $1)
-    for host in $hosts; do
-      echo Shutting down host: $host
-      ipmitool -I lanplus -H ''${host}-ipmi -P "" -U "" chassis power off
-    done
-  '';
-
-  resumeProgram = pkgs.writeShellScript "resume.sh" ''
-    exec 1>>/var/log/power_save.log 2>>/var/log/power_save.log
-    set -x
-    export "PATH=/run/current-system/sw/bin:$PATH"
-    echo "$(date) Suspend invoked $0 $*" >> /var/log/power_save.log
-    hosts=$(scontrol show hostnames $1)
-    for host in $hosts; do
-      echo Starting host: $host
-      ipmitool -I lanplus -H ''${host}-ipmi -P "" -U "" chassis power on
-    done
-  '';
-
-in {
-  services.slurm = {
-    controlMachine = "apex";
-    clusterName = "jungle";
-    nodeName = [
-      "owl[1,2]  Sockets=2 CoresPerSocket=14 ThreadsPerCore=2 Feature=owl"
-      "fox       Sockets=8 CoresPerSocket=24 ThreadsPerCore=1"
-    ];
-
-    partitionName = [
-      "owl Nodes=owl[1-2]     Default=YES DefaultTime=01:00:00 MaxTime=INFINITE State=UP"
-      "fox Nodes=fox          Default=NO  DefaultTime=01:00:00 MaxTime=INFINITE State=UP"
-    ];
-
-    # See slurm.conf(5) for more details about these options.
-    extraConfig = ''
-      # Use PMIx for MPI by default. It works okay with MPICH and OpenMPI, but
-      # not with Intel MPI. For that use the compatibility shim libpmi.so
-      # setting I_MPI_PMI_LIBRARY=$pmix/lib/libpmi.so while maintaining the PMIx
-      # library in SLURM (--mpi=pmix). See more details here:
-      # https://pm.bsc.es/gitlab/rarias/jungle/-/issues/16
-      MpiDefault=pmix
-
-      # When a node reboots return that node to the slurm queue as soon as it
-      # becomes operative again.
-      ReturnToService=2
-
-      # Track all processes by using a cgroup
-      ProctrackType=proctrack/cgroup
-
-      # Enable task/affinity to allow the jobs to run in a specified subset of
-      # the resources. Use the task/cgroup plugin to enable process containment.
-      TaskPlugin=task/affinity,task/cgroup
-
-      # Power off unused nodes until they are requested
-      SuspendProgram=${suspendProgram}
-      SuspendTimeout=60
-      ResumeProgram=${resumeProgram}
-      ResumeTimeout=300
-      SuspendExcNodes=fox
-
-      # Turn the nodes off after 1 hour of inactivity
-      SuspendTime=3600
-
-      # Reduce port range so we can allow only this range in the firewall
-      SrunPortRange=60000-61000
-
-      # Use cores as consumable resources. In SLURM terms, a core may have
-      # multiple hardware threads (or CPUs).
-      SelectType=select/cons_tres
-
-      # Ignore memory constraints and only use unused cores to share a node with
-      # other jobs.
-      SelectTypeParameters=CR_Core
-
-      # Required for pam_slurm_adopt, see https://slurm.schedmd.com/pam_slurm_adopt.html
-      # This sets up the "extern" step into which ssh-launched processes will be
-      # adopted. Alloc runs the prolog at job allocation (salloc) rather than
-      # when a task runs (srun) so we can ssh early.
-      PrologFlags=Alloc,Contain,X11
-
-      # LaunchParameters=ulimit_pam_adopt will set RLIMIT_RSS in processes
-      # adopted by the external step, similar to tasks running in regular steps
-      # LaunchParameters=ulimit_pam_adopt
-      SlurmdDebug=debug5
-      #DebugFlags=Protocol,Cgroup
-    '';
-
-    extraCgroupConfig = ''
-      CgroupPlugin=cgroup/v2
-      #ConstrainCores=yes
-    '';
-  };
-
-  # Place the slurm config in /etc as this will be required by PAM
-  environment.etc.slurm.source = config.services.slurm.etcSlurm;
-
-  age.secrets.mungeKey = {
-    file = ../../secrets/munge-key.age;
-    owner = "munge";
-    group = "munge";
-  };
-
-  services.munge = {
-    enable = true;
-    password = config.age.secrets.mungeKey.path;
-  };
-}
--- a/m/module/slurm-exporter.nix
+++ b/m/module/slurm-exporter.nix
@ -1,28 +0,0 @@
-{ config, lib, pkgs, ... }:
-
-# See also: https://github.com/NixOS/nixpkgs/pull/112010
-# And: https://github.com/NixOS/nixpkgs/pull/115839
-
-with lib;
-
-{
-  systemd.services."prometheus-slurm-exporter" = {
-    wantedBy = [ "multi-user.target" ];
-    after = [ "network.target" ];
-    serviceConfig = {
-      Restart = mkDefault "always";
-      PrivateTmp = mkDefault true;
-      WorkingDirectory = mkDefault "/tmp";
-      DynamicUser = mkDefault true;
-      ExecStart = ''
-        ${pkgs.prometheus-slurm-exporter}/bin/prometheus-slurm-exporter --listen-address "127.0.0.1:9341"
-      '';
-      Environment = [
-        "PATH=${pkgs.slurm}/bin"
-        # We need to specify the slurm config to be able to talk to the slurmd
-        # daemon.
-        "SLURM_CONF=${config.services.slurm.etcSlurm}/slurm.conf"
-      ];
-    };
-  };
-}
--- a/m/module/slurm-firewall.nix
+++ b/m/module/slurm-firewall.nix
@ -1,8 +0,0 @@
-{ ... }:
-
-{
-  networking.firewall = {
-    # Required for PMIx in SLURM, we should find a better way
-    allowedTCPPortRanges = [ { from=1024; to=65535; } ];
-  };
-}
--- a/m/module/slurm-hut-nix-store.nix
+++ b/m/module/slurm-hut-nix-store.nix
@ -1,19 +0,0 @@
-{ ... }:
-
-{
-  # Mount the hut nix store via NFS
-  fileSystems."/mnt/hut-nix-store" = {
-    device = "hut:/nix/store";
-    fsType = "nfs";
-    options = [ "ro" ];
-  };
-
-  systemd.services.slurmd.serviceConfig = {
-    # When running a job, bind the hut store in /nix/store so the paths are
-    # available too.
-    # FIXME: This doesn't keep the programs in /run/current-system/sw/bin
-    # available in the store. Ideally they should be merged but the overlay FS
-    # doesn't work when the underlying directories change.
-    BindReadOnlyPaths = "/mnt/hut-nix-store:/nix/store";
-  };
-}
--- a/m/module/slurm-server.nix
+++ b/m/module/slurm-server.nix
@ -1,23 +0,0 @@
-{ ... }:
-
-{
-  imports = [
-    ./slurm-common.nix
-  ];
-
-  services.slurm.server.enable = true;
-
-  networking.firewall = {
-    extraCommands = ''
-      # Accept slurm connections to controller from compute nodes
-      iptables -A nixos-fw -p tcp -s 10.0.40.0/24 --dport 6817 -j nixos-fw-accept
-      # Accept slurm connections from compute nodes for srun
-      iptables -A nixos-fw -p tcp -s 10.0.40.0/24 --dport 60000:61000 -j nixos-fw-accept
-
-      # Accept slurm connections to controller from fox (via wireguard)
-      iptables -A nixos-fw -p tcp -i wg0 -s 10.106.0.1/32 --dport 6817 -j nixos-fw-accept
-      # Accept slurm connections from fox for srun (via wireguard)
-      iptables -A nixos-fw -p tcp -i wg0 -s 10.106.0.1/32 --dport 60000:61000 -j nixos-fw-accept
-    '';
-  };
-}
--- a/m/module/upc-qaire-exporter.nix
+++ b/m/module/upc-qaire-exporter.nix
@ -1,17 +0,0 @@
-{ config, lib, pkgs, ... }:
-
-with lib;
-
-{
-  systemd.services."prometheus-upc-qaire-exporter" = {
-    wantedBy = [ "multi-user.target" ];
-    after = [ "network.target" ];
-    serviceConfig = {
-      Restart = mkDefault "always";
-      PrivateTmp = mkDefault true;
-      WorkingDirectory = mkDefault "/tmp";
-      DynamicUser = mkDefault true;
-      ExecStart = "${pkgs.upc-qaire-exporter}/bin/upc-qaire-exporter";
-    };
-  };
-}
--- a/m/module/vpn-dac.nix
+++ b/m/module/vpn-dac.nix
@ -1,35 +0,0 @@
-{config, ...}:
-{
-  age.secrets.vpn-dac-login.file = ../../secrets/vpn-dac-login.age;
-  age.secrets.vpn-dac-client-key.file = ../../secrets/vpn-dac-client-key.age;
-
-  services.openvpn.servers = {
-    # systemctl status openvpn-dac.service
-    dac = {
-      config = ''
-        client
-        dev tun
-        proto tcp
-        remote vpn.ac.upc.edu 1194
-        remote vpn.ac.upc.edu 80
-        resolv-retry infinite
-        nobind
-        persist-key
-        persist-tun
-        ca ${./vpn-dac/ca.crt}
-        cert ${./vpn-dac/client.crt}
-        # Only key needs to be secret
-        key ${config.age.secrets.vpn-dac-client-key.path}
-        remote-cert-tls server
-        comp-lzo
-        verb 3
-        auth-user-pass ${config.age.secrets.vpn-dac-login.path}
-        reneg-sec 0
-
-        # Only route fox-ipmi
-        pull-filter ignore "route "
-        route 147.83.35.27 255.255.255.255
-      '';
-    };
-  };
-}
--- a/m/module/vpn-dac/ca.crt
+++ b/m/module/vpn-dac/ca.crt
@ -1,31 +0,0 @@
-----BEGIN CERTIFICATE-----
-MIIFUjCCBDqgAwIBAgIJAJH118PApk5hMA0GCSqGSIb3DQEBCwUAMIHLMQswCQYD
-VQQGEwJFUzESMBAGA1UECBMJQmFyY2Vsb25hMRIwEAYDVQQHEwlCYXJjZWxvbmEx
-LTArBgNVBAoTJFVuaXZlcnNpdGF0IFBvbGl0ZWNuaWNhIGRlIENhdGFsdW55YTEk
-MCIGA1UECxMbQXJxdWl0ZWN0dXJhIGRlIENvbXB1dGFkb3JzMRAwDgYDVQQDEwdM
-Q0FDIENBMQ0wCwYDVQQpEwRMQ0FDMR4wHAYJKoZIhvcNAQkBFg9sY2FjQGFjLnVw
-Yy5lZHUwHhcNMTYwMTEyMTI0NDIxWhcNNDYwMTEyMTI0NDIxWjCByzELMAkGA1UE
-BhMCRVMxEjAQBgNVBAgTCUJhcmNlbG9uYTESMBAGA1UEBxMJQmFyY2Vsb25hMS0w
-KwYDVQQKEyRVbml2ZXJzaXRhdCBQb2xpdGVjbmljYSBkZSBDYXRhbHVueWExJDAi
-BgNVBAsTG0FycXVpdGVjdHVyYSBkZSBDb21wdXRhZG9yczEQMA4GA1UEAxMHTENB
-QyBDQTENMAsGA1UEKRMETENBQzEeMBwGCSqGSIb3DQEJARYPbGNhY0BhYy51cGMu
-ZWR1MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEA0CteSeof7Xwi51kC
-F0nQ4E9iR5Lq7wtfRuVPn6JJcIxJJ6+F9gr4R/HIHTztW4XAzReE36DYfexupx3D
-6UgQIkMLlVyGqRbulNF+RnCx20GosF7Dm4RGBVvOxBP1PGjYq/A+XhaaDAFd0cOF
-LMNkzuYP7PF0bnBEaHnxmN8bPmuyDyas7fK9AAc3scyWT2jSBPbOVFvCJwPg8MH9
-V/h+hKwL/7hRt1MVfVv2qyIuKwTki8mUt0RcVbP7oJoRY5K1+R52phIz/GL/b4Fx
-L6MKXlQxLi8vzP4QZXgCMyV7oFNdU3VqCEXBA11YIRvsOZ4QS19otIk/ZWU5x+HH
-LAIJ7wIDAQABo4IBNTCCATEwHQYDVR0OBBYEFNyezX1cH1N4QR14ebBpljqmtE7q
-MIIBAAYDVR0jBIH4MIH1gBTcns19XB9TeEEdeHmwaZY6prRO6qGB0aSBzjCByzEL
-MAkGA1UEBhMCRVMxEjAQBgNVBAgTCUJhcmNlbG9uYTESMBAGA1UEBxMJQmFyY2Vs
-b25hMS0wKwYDVQQKEyRVbml2ZXJzaXRhdCBQb2xpdGVjbmljYSBkZSBDYXRhbHVu
-eWExJDAiBgNVBAsTG0FycXVpdGVjdHVyYSBkZSBDb21wdXRhZG9yczEQMA4GA1UE
-AxMHTENBQyBDQTENMAsGA1UEKRMETENBQzEeMBwGCSqGSIb3DQEJARYPbGNhY0Bh
-Yy51cGMuZWR1ggkAkfXXw8CmTmEwDAYDVR0TBAUwAwEB/zANBgkqhkiG9w0BAQsF
-AAOCAQEAUAmOvVXIQrR+aZVO0bOTeugKBHB75eTIZSIHIn2oDUvDbAP5GXIJ56A1
-6mZXxemSMY8/9k+pRcwJhfat3IgvAN159XSqf9kRv0NHgc3FWUI1Qv/BsAn0vJO/
-oK0dbmbbRWqt86qNrCN+cUfz5aovvxN73jFfnvfDQFBk/8enj9wXxYfokjjLPR1Q
-+oTkH8dY68qf71oaUB9MndppPEPSz0K1S6h1XxvJoSu9MVSXOQHiq1cdZdxRazI3
-4f7q9sTCL+khwDAuZxAYzlEYxFFa/NN8PWU6xPw6V+t/aDhOiXUPJQB/O/K7mw3Z
-TQQx5NqM7B5jjak5fauR3/oRD8XXsA==
-----END CERTIFICATE-----
--- a/m/module/vpn-dac/client.crt
+++ b/m/module/vpn-dac/client.crt
@ -1,100 +0,0 @@
-Certificate:
-    Data:
-        Version: 3 (0x2)
-        Serial Number: 2 (0x2)
-    Signature Algorithm: sha256WithRSAEncryption
-        Issuer: C=ES, ST=Barcelona, L=Barcelona, O=Universitat Politecnica de Catalunya, OU=Arquitectura de Computadors, CN=LCAC CA/name=LCAC/emailAddress=lcac@ac.upc.edu
-        Validity
-            Not Before: Jan 12 12:45:41 2016 GMT
-            Not After : Jan 12 12:45:41 2046 GMT
-        Subject: C=ES, ST=Barcelona, L=Barcelona, O=Universitat Politecnica de Catalunya, OU=Arquitectura de Computadors, CN=client/name=LCAC/emailAddress=lcac@ac.upc.edu
-        Subject Public Key Info:
-            Public Key Algorithm: rsaEncryption
-                Public-Key: (2048 bit)
-                Modulus:
-                    00:97:99:fa:7a:0e:4d:e2:1d:a5:b1:a8:14:18:64:
-                    c7:66:bf:de:99:1d:92:3b:86:82:4d:95:39:f7:a6:
-                    56:49:97:14:4f:e3:37:00:6c:f4:d0:1d:56:79:e7:
-                    19:b5:dd:36:15:8e:1d:57:7b:59:29:d2:11:bf:58:
-                    48:e0:f7:41:3d:16:64:8d:a2:0b:4a:ac:fa:c6:83:
-                    dc:10:2a:2c:d9:97:48:ee:11:2a:bc:4b:60:dd:b9:
-                    2e:8f:45:ca:87:0b:38:65:1c:f8:a2:1d:f9:50:aa:
-                    6e:60:f9:48:df:57:12:23:e1:e7:0c:81:5c:9f:c5:
-                    b2:e6:99:99:95:30:6d:57:36:06:8c:fd:fb:f9:4f:
-                    60:d2:3c:ba:ae:28:56:2f:da:58:5c:e8:c5:7b:ec:
-                    76:d9:28:6e:fb:8c:07:f9:d7:23:c3:72:76:3c:fa:
-                    dc:20:67:8f:cc:16:e0:91:07:d5:68:f9:20:4d:7d:
-                    5c:2d:02:04:16:76:52:f3:53:be:a3:dc:0d:d5:fb:
-                    6b:55:29:f3:52:35:c8:7d:99:d1:4a:94:be:b1:8e:
-                    fd:85:18:25:eb:41:e9:56:da:af:62:84:20:0a:00:
-                    17:94:92:94:91:6a:f8:54:37:17:ee:1e:bb:fb:93:
-                    71:91:d9:e4:e9:b8:3b:18:7d:6d:7d:4c:ce:58:55:
-                    f9:41
-                Exponent: 65537 (0x10001)
-        X509v3 extensions:
-            X509v3 Basic Constraints: 
-                CA:FALSE
-            Netscape Comment: 
-                Easy-RSA Generated Certificate
-            X509v3 Subject Key Identifier: 
-                1B:88:06:D5:33:1D:5C:48:46:B5:DE:78:89:36:96:91:3A:74:43:18
-            X509v3 Authority Key Identifier: 
-                keyid:DC:9E:CD:7D:5C:1F:53:78:41:1D:78:79:B0:69:96:3A:A6:B4:4E:EA
-                DirName:/C=ES/ST=Barcelona/L=Barcelona/O=Universitat Politecnica de Catalunya/OU=Arquitectura de Computadors/CN=LCAC CA/name=LCAC/emailAddress=lcac@ac.upc.edu
-                serial:91:F5:D7:C3:C0:A6:4E:61
-
-            X509v3 Extended Key Usage: 
-                TLS Web Client Authentication
-            X509v3 Key Usage: 
-                Digital Signature
-            X509v3 Subject Alternative Name: 
-                DNS:client
-    Signature Algorithm: sha256WithRSAEncryption
-         42:e8:50:b2:e7:88:75:86:0b:bb:29:e3:aa:c6:0e:4c:e8:ea:
-         3d:0c:02:31:7f:3b:80:0c:3f:80:af:45:d6:62:27:a0:0e:e7:
-         26:09:12:97:95:f8:d9:9b:89:b5:ef:56:64:f1:de:82:74:e0:
-         31:0a:cc:90:0a:bd:50:b8:54:95:0a:ae:3b:40:df:76:b6:d1:
-         01:2e:f3:96:9f:52:d4:e9:14:6d:b7:14:9d:45:99:33:36:2a:
-         01:0b:15:1a:ed:55:dc:64:83:65:1a:06:42:d9:c7:dc:97:d4:
-         02:81:c2:58:2b:ea:e4:b7:ae:84:3a:e4:3f:f1:2e:fa:ec:f3:
-         40:5d:b8:6a:d5:5e:e1:e8:2f:e2:2f:48:a4:38:a1:4f:22:e3:
-         4f:66:94:aa:02:78:9a:2b:7a:5d:aa:aa:51:a5:e3:d0:91:e9:
-         1d:f9:08:ed:8b:51:c9:a6:af:46:85:b5:1c:ed:12:a1:28:33:
-         75:36:00:d8:5c:14:65:96:c0:28:7d:47:50:a4:89:5f:b0:72:
-         1a:4b:13:17:26:0f:f0:b8:65:3c:e9:96:36:f9:bf:90:59:33:
-         87:1f:01:03:25:f8:f0:3a:9b:33:02:d0:0a:43:b5:0a:cf:62:
-         a1:45:38:37:07:9d:9c:94:0b:31:c6:3c:34:b7:fc:5a:0c:e4:
-         bf:23:f6:7d
-----BEGIN CERTIFICATE-----
-MIIFqjCCBJKgAwIBAgIBAjANBgkqhkiG9w0BAQsFADCByzELMAkGA1UEBhMCRVMx
-EjAQBgNVBAgTCUJhcmNlbG9uYTESMBAGA1UEBxMJQmFyY2Vsb25hMS0wKwYDVQQK
-EyRVbml2ZXJzaXRhdCBQb2xpdGVjbmljYSBkZSBDYXRhbHVueWExJDAiBgNVBAsT
-G0FycXVpdGVjdHVyYSBkZSBDb21wdXRhZG9yczEQMA4GA1UEAxMHTENBQyBDQTEN
-MAsGA1UEKRMETENBQzEeMBwGCSqGSIb3DQEJARYPbGNhY0BhYy51cGMuZWR1MB4X
-DTE2MDExMjEyNDU0MVoXDTQ2MDExMjEyNDU0MVowgcoxCzAJBgNVBAYTAkVTMRIw
-EAYDVQQIEwlCYXJjZWxvbmExEjAQBgNVBAcTCUJhcmNlbG9uYTEtMCsGA1UEChMk
-VW5pdmVyc2l0YXQgUG9saXRlY25pY2EgZGUgQ2F0YWx1bnlhMSQwIgYDVQQLExtB
-cnF1aXRlY3R1cmEgZGUgQ29tcHV0YWRvcnMxDzANBgNVBAMTBmNsaWVudDENMAsG
-A1UEKRMETENBQzEeMBwGCSqGSIb3DQEJARYPbGNhY0BhYy51cGMuZWR1MIIBIjAN
-BgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAl5n6eg5N4h2lsagUGGTHZr/emR2S
-O4aCTZU596ZWSZcUT+M3AGz00B1WeecZtd02FY4dV3tZKdIRv1hI4PdBPRZkjaIL
-Sqz6xoPcECos2ZdI7hEqvEtg3bkuj0XKhws4ZRz4oh35UKpuYPlI31cSI+HnDIFc
-n8Wy5pmZlTBtVzYGjP37+U9g0jy6rihWL9pYXOjFe+x22Shu+4wH+dcjw3J2PPrc
-IGePzBbgkQfVaPkgTX1cLQIEFnZS81O+o9wN1ftrVSnzUjXIfZnRSpS+sY79hRgl
-60HpVtqvYoQgCgAXlJKUkWr4VDcX7h67+5Nxkdnk6bg7GH1tfUzOWFX5QQIDAQAB
-o4IBljCCAZIwCQYDVR0TBAIwADAtBglghkgBhvhCAQ0EIBYeRWFzeS1SU0EgR2Vu
-ZXJhdGVkIENlcnRpZmljYXRlMB0GA1UdDgQWBBQbiAbVMx1cSEa13niJNpaROnRD
-GDCCAQAGA1UdIwSB+DCB9YAU3J7NfVwfU3hBHXh5sGmWOqa0TuqhgdGkgc4wgcsx
-CzAJBgNVBAYTAkVTMRIwEAYDVQQIEwlCYXJjZWxvbmExEjAQBgNVBAcTCUJhcmNl
-bG9uYTEtMCsGA1UEChMkVW5pdmVyc2l0YXQgUG9saXRlY25pY2EgZGUgQ2F0YWx1
-bnlhMSQwIgYDVQQLExtBcnF1aXRlY3R1cmEgZGUgQ29tcHV0YWRvcnMxEDAOBgNV
-BAMTB0xDQUMgQ0ExDTALBgNVBCkTBExDQUMxHjAcBgkqhkiG9w0BCQEWD2xjYWNA
-YWMudXBjLmVkdYIJAJH118PApk5hMBMGA1UdJQQMMAoGCCsGAQUFBwMCMAsGA1Ud
-DwQEAwIHgDARBgNVHREECjAIggZjbGllbnQwDQYJKoZIhvcNAQELBQADggEBAELo
-ULLniHWGC7sp46rGDkzo6j0MAjF/O4AMP4CvRdZiJ6AO5yYJEpeV+NmbibXvVmTx
-3oJ04DEKzJAKvVC4VJUKrjtA33a20QEu85afUtTpFG23FJ1FmTM2KgELFRrtVdxk
-g2UaBkLZx9yX1AKBwlgr6uS3roQ65D/xLvrs80BduGrVXuHoL+IvSKQ4oU8i409m
-lKoCeJorel2qqlGl49CR6R35CO2LUcmmr0aFtRztEqEoM3U2ANhcFGWWwCh9R1Ck
-iV+wchpLExcmD/C4ZTzpljb5v5BZM4cfAQMl+PA6mzMC0ApDtQrPYqFFODcHnZyU
-CzHGPDS3/FoM5L8j9n0=
-----END CERTIFICATE-----
--- a/m/owl1/configuration.nix
+++ b/m/owl1/configuration.nix
@ -1,28 +0,0 @@
-{ config, pkgs, ... }:
-
-{
-  imports = [
-    ../common/ssf.nix
-    ../module/ceph.nix
-    ../module/emulation.nix
-    ../module/slurm-client.nix
-    ../module/slurm-firewall.nix
-    ../module/debuginfod.nix
-    ../module/hut-substituter.nix
-  ];
-
-  # Select the this using the ID to avoid mismatches
-  boot.loader.grub.device = "/dev/disk/by-id/wwn-0x55cd2e414d53566c";
-
-  networking = {
-    hostName = "owl1";
-    interfaces.eno1.ipv4.addresses = [ {
-      address = "10.0.40.1";
-      prefixLength = 24;
-    } ];
-    interfaces.ibp5s0.ipv4.addresses = [ {
-      address = "10.0.42.1";
-      prefixLength = 24;
-    } ];
-  };
-}
--- a/m/owl2/configuration.nix
+++ b/m/owl2/configuration.nix
@ -1,29 +0,0 @@
-{ config, pkgs, ... }:
-
-{
-  imports = [
-    ../common/ssf.nix
-    ../module/ceph.nix
-    ../module/emulation.nix
-    ../module/slurm-client.nix
-    ../module/slurm-firewall.nix
-    ../module/debuginfod.nix
-    ../module/hut-substituter.nix
-  ];
-
-  # Select the this using the ID to avoid mismatches
-  boot.loader.grub.device = "/dev/disk/by-id/wwn-0x55cd2e414d535629";
-
-  networking = {
-    hostName = "owl2";
-    interfaces.eno1.ipv4.addresses = [ {
-      address = "10.0.40.2";
-      prefixLength = 24;
-    } ];
-    # Watch out! The OmniPath device is not in the same place here:
-    interfaces.ibp129s0.ipv4.addresses = [ {
-      address = "10.0.42.2";
-      prefixLength = 24;
-    } ];
-  };
-}
--- a/m/raccoon/configuration.nix
+++ b/m/raccoon/configuration.nix
@ -1,98 +0,0 @@
-{ config, pkgs, lib, modulesPath, ... }:
-
-{
-  imports = [
-    ../common/base.nix
-    ../common/ssf/hosts.nix
-    ../module/emulation.nix
-    ../module/debuginfod.nix
-    ../module/nvidia.nix
-    ../eudy/kernel/perf.nix
-    ./wireguard.nix
-    ../module/hut-substituter.nix
-  ];
-
-  # Don't install Grub on the disk yet
-  boot.loader.grub.device = "nodev";
-
-  # Enable serial console
-  boot.kernelParams = [
-    "console=tty1"
-    "console=ttyS1,115200"
-  ];
-
-  networking = {
-    hostName = "raccoon";
-    # Only BSC DNSs seem to be reachable from the office VLAN
-    nameservers = [ "84.88.52.35" "84.88.52.36" ];
-    defaultGateway = "84.88.51.129";
-    interfaces.eno0.ipv4.addresses = [ {
-      address = "84.88.51.152";
-      prefixLength = 25;
-    } ];
-    interfaces.enp5s0f1.ipv4.addresses = [ {
-      address = "10.0.44.1";
-      prefixLength = 24;
-    } ];
-    nat = {
-      enable = true;
-      internalInterfaces = [ "enp5s0f1" ];
-      externalInterface = "eno0";
-    };
-    hosts = {
-      "10.0.44.4" = [ "tent" ];
-      "84.88.53.236" = [ "apex" ];
-    };
-  };
-
-  # Mount the NFS home
-  fileSystems."/nfs/home" = {
-    device = "10.106.0.30:/home";
-    fsType = "nfs";
-    options = [ "nfsvers=3" "rsize=1024" "wsize=1024" "cto" "nofail" ];
-  };
-
-  # Enable performance governor
-  powerManagement.cpuFreqGovernor = "performance";
-
-  hardware.nvidia.open = false; # Maxwell is older than Turing architecture
-
-  services.openssh.settings.X11Forwarding = true;
-
-  services.prometheus.exporters.node = {
-    enable = true;
-    enabledCollectors = [ "systemd" ];
-    port = 9002;
-    listenAddress = "127.0.0.1";
-  };
-
-  users.motd = ''
-    ⠀⠀⠀⠀⠀⠀⠀⣀⣀⣄⣠⣀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
-    ⠀⠀⠀⠀⠀⠀⢰⠇⡀⠀⠙⠻⡿⣦⣀⡀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⡀⠀⠀⠀⠀
-    ⠀⠀⠀⠀⠀⠀⡎⢰⣧⠀⠀⠀⠁⠈⠛⢿⣦⡀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢀⣠⣴⡦⠶⠟⠓⠚⠻⡄⠀
-    ⠀⠀⠀⠀⠀⠀⣧⠀⣱⣀⣰⣧⠀⢀⠀⣘⣿⣿⣦⣶⣄⣠⡀⠀⠀⣀⣀⣤⣴⣄⣀⣀⡀⠀⠀⠀⠀⠀⠀⠀⠀⢀⣴⣿⠿⠏⠁⠀⣀⣠⣶⣿⡶⣿⠀
-    ⠀⠀⠀⠀⠀⠀⣹⣆⠘⣿⣿⣿⣇⢸⣷⣿⣿⣿⣿⣿⣿⣿⣿⣿⣾⣿⣿⣿⣿⣿⣿⣿⣿⣶⣶⣦⡀⣀⣤⣠⣤⡾⠋⠀⢀⣤⣶⣿⣿⣿⣿⣿⣿⣿⡀
-    ⠀⠀⠀⠀⠀⠀⠘⢿⡄⢼⣿⣿⣿⣿⣿⡟⠻⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣵⣾⡾⠙⣋⣩⣽⣿⣿⣿⣿⢋⡼⠁
-    ⠀⠀⠀⠀⠀⠀⠀⠈⢻⣄⠸⢿⣿⣿⠿⠷⠀⠈⠀⣭⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣷⣾⣿⣿⣿⣿⣿⣿⠇⡼⠁⠀
-    ⠀⠀⠀⠀⠀⠀⠀⠀⢾⣯⡀⠀⢼⡿⠀⠀⠀⢼⠿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡿⣿⡿⣿⣿⣿⠿⣿⣯⣼⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡿⢋⡼⠁⠀⠀
-    ⠀⠀⠀⠀⠀⠀⠀⠀⠀⢻⡏⠠⣦⠁⠀⠀⠀⠀⠀⠟⠛⠛⣿⣿⣿⣿⣿⠿⠁⠀⠁⢿⠙⠁⠀⠛⠹⣿⣏⣾⣿⣿⣿⣿⣿⣿⣿⣿⠿⠃⣹⠁⠀⠀⠀
-    ⠀⠀⠀⠀⠀⠀⠀⠀⠀⣘⣧⠀⠙⠀⠀⠀⠀⠀⠀⠀⠀⠀⣿⣿⣿⡿⡿⠀⠀⠀⠀⠈⠀⠀⠀⠀⠀⠀⢹⣿⠿⢿⣿⣿⣿⣿⣿⠋⢀⡤⠛⠀⠀⠀⠀
-    ⠀⠀⠀⠀⠀⠀⠀⠀⠀⢹⡯⠁⠀⠀⠀⠀⠀⠀⠀⠀⠀⠸⣿⣿⣿⠇⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠁⠀⢸⣿⣿⣿⠛⠉⠀⣰⠷⠀⠀⠀⠀⠀
-    ⠀⠀⠀⠀⠀⠀⠀⠀⠀⢸⠇⠀⠀⠀⠀⠀⢀⣿⡇⠀⠀⢻⣿⣿⠁⠀⠀⢠⣾⠁⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠸⠟⢿⣿⣄⡀⢸⣿⡀⠀⠀⠀⠀⠀
-    ⠀⠀⠀⠀⠀⠀⠀⠀⢀⣿⠀⠀⠀⢰⣿⣿⡛⣿⣿⡄⢠⡺⠿⡍⠁⢀⣤⣿⣿⣿⠿⣷⣮⣉⣀⡀⠀⠀⠀⠀⠀⠀⠀⠀⠈⣿⠀⠀⠈⣧⠀⠀⠀⠀⠀
-    ⠀⠀⠀⠀⠀⠀⠀⠀⢾⠉⠃⠀⣴⣿⣟⠻⣿⣿⣿⡇⢸⣿⣶⠀⢀⣾⣿⣿⣟⠿⣷⣾⣿⣿⣿⣿⣦⣤⣤⡤⠀⠀⠀⠀⠀⠁⠀⠀⠀⣼⠗⠀⠀⠀⠀
-    ⠀⠀⠐⢄⡀⠀⠀⠀⢘⡀⠀⢶⣾⣿⣿⣿⣿⡿⠋⠁⠈⠻⠉⠀⠚⠻⣿⣿⣿⣶⣾⣿⣿⣿⣿⣿⣿⣷⣬⣤⣶⣦⡀⣾⣶⣇⠀⠀⠈⢉⣷⠀⠀⠀⠀
-    ⠀⠀⠀⠀⠈⠓⠶⢦⡽⠄⣈⣿⣿⣿⣿⣿⠏⠀⠀⠀⠀⠀⠀⠀⠀⠀⠹⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡓⠙⣿⡟⠀⠀⠀⠈⠛⣷⣶⡄⠀
-    ⠀⠀⠀⠀⠀⠀⠀⢀⣬⠆⢠⣍⣛⠻⣿⡇⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠈⢿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣉⣀⡀⠀⠀⠈⠛⢿⣦⡀
-    ⠐⠒⠒⠶⠶⠶⢦⣬⣟⣥⣀⡉⠛⠻⠶⢁⣤⣾⣿⣿⣿⣷⡄⠀⠀⠀⠀⠀⢸⣿⣿⣿⣿⣿⣟⡛⠿⠭⠭⠭⠭⠭⠿⠿⠿⢿⣿⣟⠃⠀⠀⠀⠹⣟⠓
-    ⠀⣀⣠⠤⠤⢤⣤⣾⣤⡄⣉⣉⣙⣓⡂⣿⣿⣭⣹⣿⣿⣿⣿⡰⣂⣀⢀⠀⠻⣿⠛⠻⠟⠡⣶⣾⣿⣿⣿⣿⣿⣿⣿⡖⠒⠒⠒⠛⠷⢤⡀⢰⣴⣿⡆
-    ⠀⠀⠀⢀⣠⡴⠾⠟⠻⣟⡉⠉⠉⠉⢁⢿⣿⣿⣿⣿⣿⣿⡿⣱⣿⣭⡌⠤⠀⠀⠐⣶⣌⡻⣶⣭⡻⢿⣿⣿⣿⣿⣿⣯⣥⣤⣦⠀⠠⣴⣶⣶⣿⡟⢿
-    ⢀⠔⠊⠉⠀⠀⠀⠀⢸⣯⣤⠀⠀⠠⣼⣮⣟⣿⣿⣿⣻⣭⣾⣿⣿⣷⣶⣦⠶⣚⣾⣿⣿⣷⣜⣿⣿⣶⣝⢿⣿⣿⣿⣿⣷⣦⣄⣰⡄⠈⢿⣿⡿⣇⠀
-    ⠀⠀⠀⠀⠀⠀⠀⠀⠈⢡⢇⠀⠀⣠⣿⣿⣿⣯⣟⣛⣛⣛⣛⣛⣩⣭⣴⣶⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣷⣿⣿⣿⣿⣿⣿⣿⣿⣿⣦⣻⣿⣧⠀⠀
-    ⠀⠀⠀⠀⠀⠀⠀⠀⠀⣾⠏⠀⢹⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣦⣍⣿⣿⣿⣿⡄⠀
-    ⠀⠀⠀⠀⠀⠀⠀⠀⠀⣿⣾⡁⢈⣾⣿⡿⠛⣛⣿⣿⣿⣿ DO YOU BRING FEEDS? ⣿⣿⣿⣿⣿⣿⡏⠈⠙⠈⠁⠀
-    ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠛⡿⠛⠉⣽⣿⣷⣾⡿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡿⠷⠌⠛⠉⠀⠁⠀⠀⠀⠀⠀
-    ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠈⠀⠀⠹⠋⠀⢻⣿⣿⣿⣿⠿⢿⣿⣿⣿⣿⣿⣿⠿⣿⣿⣿⣿⠿⠛⠋⠉⠁⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
-    ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠉⠉⠁⠀⠀⠀⠀⠀⠈⠉⠉⠀⠀⠈⠋⠉⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ 
-  '';
-}
--- a/m/raccoon/wireguard.nix
+++ b/m/raccoon/wireguard.nix
@ -1,48 +0,0 @@
-{ config, pkgs, ... }:
-
-{
-  networking.nat = {
-    enable = true;
-    enableIPv6 = false;
-    externalInterface = "eno0";
-    internalInterfaces = [ "wg0" ];
-  };
-
-  networking.firewall = {
-    allowedUDPPorts = [ 666 ];
-  };
-
-  age.secrets.wgRaccoon.file = ../../secrets/wg-raccoon.age;
-
-  # Enable WireGuard
-  networking.wireguard.enable = true;
-  networking.wireguard.interfaces = {
-    wg0 = {
-      ips = [ "10.106.0.236/24" ];
-      listenPort = 666;
-      privateKeyFile = config.age.secrets.wgRaccoon.path;
-      # Public key: QUfnGXSMEgu2bviglsaSdCjidB51oEDBFpnSFcKGfDI=
-      peers = [
-        {
-          name = "fox";
-          publicKey = "VfMPBQLQTKeyXJSwv8wBhc6OV0j2qAxUpX3kLHunK2Y=";
-          allowedIPs = [ "10.106.0.1/32" ];
-          endpoint = "fox.ac.upc.edu:666";
-          persistentKeepalive = 25;
-        }
-        {
-          name = "apex";
-          publicKey = "VwhcN8vSOzdJEotQTpmPHBC52x3Hbv1lkFIyKubrnUA=";
-          allowedIPs = [ "10.106.0.30/32" "10.0.40.0/24" ];
-          endpoint = "ssfhead.bsc.es:666";
-          persistentKeepalive = 25;
-        }
-      ];
-    };
-  };
-
-  networking.hosts = {
-    "10.106.0.1"  = [ "fox.wg" ];
-    "10.106.0.30" = [ "apex.wg" ];
-  };
-}
--- a/m/tent/blackbox.yml
+++ b/m/tent/blackbox.yml
@ -1,14 +0,0 @@
-modules:
-  http_2xx:
-    prober: http
-    timeout: 5s
-    http:
-      preferred_ip_protocol: "ip4"
-      follow_redirects: true
-      valid_status_codes: []  # Defaults to 2xx
-      method: GET
-  icmp:
-    prober: icmp
-    timeout: 5s
-    icmp:
-      preferred_ip_protocol: "ip4"
--- a/m/tent/configuration.nix
+++ b/m/tent/configuration.nix
@ -1,85 +0,0 @@
-{ config, pkgs, lib, ... }:
-
-{
-  imports = [
-    ../common/xeon.nix
-    ../common/ssf/hosts.nix
-    ../module/emulation.nix
-    ../module/debuginfod.nix
-    ./monitoring.nix
-    ./nginx.nix
-    ./nix-serve.nix
-    ./gitlab-runner.nix
-    ./gitea.nix
-    ../hut/public-inbox.nix
-    ../hut/msmtp.nix
-    ../module/p.nix
-    ../module/vpn-dac.nix
-    ../module/hut-substituter.nix
-  ];
-
-  # Select the this using the ID to avoid mismatches
-  boot.loader.grub.device = "/dev/disk/by-id/wwn-0x55cd2e414d537675";
-
-  networking = {
-    hostName = "tent";
-    interfaces.eno1.ipv4.addresses = [
-      {
-        address = "10.0.44.4";
-        prefixLength = 24;
-      }
-    ];
-
-    # Only BSC DNSs seem to be reachable from the office VLAN
-    nameservers = [ "84.88.52.35" "84.88.52.36" ];
-    search = [ "bsc.es" "ac.upc.edu" ];
-    defaultGateway = "10.0.44.1";
-    hosts = {
-      "84.88.53.236" = [ "apex" ];
-      "10.0.44.1" = [ "raccoon" ];
-    };
-  };
-
-  services.p.enable = true;
-
-  services.prometheus.exporters.node = {
-    enable = true;
-    enabledCollectors = [ "systemd" ];
-    port = 9002;
-    listenAddress = "127.0.0.1";
-  };
-
-  boot.swraid = {
-    enable = true;
-    mdadmConf = ''
-      DEVICE partitions
-      ARRAY /dev/md0 metadata=1.2 UUID=496db1e2:056a92aa:a544543f:40db379d
-      MAILADDR root
-    '';
-  };
-
-  fileSystems."/vault" = {
-    device = "/dev/disk/by-label/vault";
-    fsType = "ext4";
-  };
-
-  # Make a /vault/$USER directory for each user.
-  systemd.services.create-vault-dirs = let
-    # Take only normal users in tent
-    users = lib.filterAttrs (_: v: v.isNormalUser) config.users.users;
-    commands = lib.concatLists (lib.mapAttrsToList
-      (_: user: [
-        "install -d -o ${user.name} -g ${user.group} -m 0711 /vault/home/${user.name}"
-      ]) users);
-    script = pkgs.writeShellScript "create-vault-dirs.sh" (lib.concatLines commands);
-  in {
-    enable = true;
-    wants = [ "local-fs.target" ];
-    after = [ "local-fs.target" ];
-    wantedBy = [ "multi-user.target" ];
-    serviceConfig.ExecStart = script;
-  };
-
-  # disable automatic garbage collector
-  nix.gc.automatic = lib.mkForce false;
-}
--- a/m/tent/gitea.nix
+++ b/m/tent/gitea.nix
@ -1,30 +0,0 @@
-{ config, lib, ... }:
-{
-  services.gitea = {
-    enable = true;
-    appName = "Gitea in the jungle";
-
-    settings = {
-      server = {
-        ROOT_URL = "https://jungle.bsc.es/git/";
-        LOCAL_ROOT_URL = "https://jungle.bsc.es/git/";
-        LANDING_PAGE = "explore";
-      };
-      metrics.ENABLED = true;
-      service = {
-        DISABLE_REGISTRATION = true;
-        REGISTER_MANUAL_CONFIRM = true;
-        ENABLE_NOTIFY_MAIL = true;
-      };
-      log.LEVEL = "Warn";
-
-      mailer = {
-        ENABLED       = true;
-        FROM          = "jungle-robot@bsc.es";
-        PROTOCOL      = "sendmail";
-        SENDMAIL_PATH = "/run/wrappers/bin/sendmail";
-        SENDMAIL_ARGS = "--";
-      };
-    };
-  };
-}
--- a/m/tent/gitlab-runner.nix
+++ b/m/tent/gitlab-runner.nix
@ -1,93 +0,0 @@
-{ pkgs, lib, config, ... }:
-
-{
-  age.secrets.tent-gitlab-runner-pm-shell.file = ../../secrets/tent-gitlab-runner-pm-shell-token.age;
-  age.secrets.tent-gitlab-runner-pm-docker.file = ../../secrets/tent-gitlab-runner-pm-docker-token.age;
-  age.secrets.tent-gitlab-runner-bsc-docker.file = ../../secrets/tent-gitlab-runner-bsc-docker-token.age;
-
-  services.gitlab-runner = let sec = config.age.secrets; in {
-    enable = true;
-    settings.concurrent = 5;
-    services = {
-      # For gitlab.pm.bsc.es
-      gitlab-pm-shell = {
-        executor = "shell";
-        environmentVariables = {
-          SHELL = "${pkgs.bash}/bin/bash";
-        };
-        authenticationTokenConfigFile = sec.tent-gitlab-runner-pm-shell.path;
-        preGetSourcesScript = pkgs.writeScript "setup" ''
-          echo "This is the preGetSources script running, brace for impact"
-          env
-        '';
-      };
-      gitlab-pm-docker = {
-        authenticationTokenConfigFile = sec.tent-gitlab-runner-pm-docker.path;
-        executor = "docker";
-        dockerImage = "debian:stable";
-      };
-
-      # For gitlab.bsc.es
-      gitlab-bsc-docker = {
-        # gitlab.bsc.es still uses the old token mechanism
-        registrationConfigFile = sec.tent-gitlab-runner-bsc-docker.path;
-        tagList = [ "docker" "tent" "nix" ];
-        executor = "docker";
-        dockerImage = "alpine";
-        dockerVolumes = [
-          "/nix/store:/nix/store:ro"
-          "/nix/var/nix/db:/nix/var/nix/db:ro"
-          "/nix/var/nix/daemon-socket:/nix/var/nix/daemon-socket:ro"
-        ];
-        dockerDisableCache = true;
-        registrationFlags = [
-          # Increase build log length to 64 MiB
-          "--output-limit 65536"
-        ];
-        preBuildScript = pkgs.writeScript "setup-container" ''
-          mkdir -p -m 0755 /nix/var/log/nix/drvs
-          mkdir -p -m 0755 /nix/var/nix/gcroots
-          mkdir -p -m 0755 /nix/var/nix/profiles
-          mkdir -p -m 0755 /nix/var/nix/temproots
-          mkdir -p -m 0755 /nix/var/nix/userpool
-          mkdir -p -m 1777 /nix/var/nix/gcroots/per-user
-          mkdir -p -m 1777 /nix/var/nix/profiles/per-user
-          mkdir -p -m 0755 /nix/var/nix/profiles/per-user/root
-          mkdir -p -m 0700 "$HOME/.nix-defexpr"
-          mkdir -p -m 0700 "$HOME/.ssh"
-          cat >> "$HOME/.ssh/known_hosts" << EOF
-          bscpm04.bsc.es ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIPx4mC0etyyjYUT2Ztc/bs4ZXSbVMrogs1ZTP924PDgT
-          gitlab-internal.bsc.es ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIF9arsAOSRB06hdy71oTvJHG2Mg8zfebADxpvc37lZo3
-          EOF
-          . ${pkgs.nix}/etc/profile.d/nix-daemon.sh
-          # Required to load SSL certificate paths
-          . ${pkgs.cacert}/nix-support/setup-hook
-        '';
-        environmentVariables = {
-          ENV = "/etc/profile";
-          USER = "root";
-          NIX_REMOTE = "daemon";
-          PATH = "${config.system.path}/bin:/bin:/sbin:/usr/bin:/usr/sbin";
-        };
-      };
-    };
-  };
-
-  systemd.services.gitlab-runner.serviceConfig = {
-    DynamicUser = lib.mkForce false;
-    User = "gitlab-runner";
-    Group = "gitlab-runner";
-    ExecStart = lib.mkForce
-      ''${pkgs.gitlab-runner}/bin/gitlab-runner run --config ''${HOME}/.gitlab-runner/config.toml --listen-address "127.0.0.1:9252" --working-directory ''${HOME}'';
-  };
-
-  users.users.gitlab-runner = {
-    uid = config.ids.uids.gitlab-runner;
-    home = "/var/lib/gitlab-runner";
-    description = "Gitlab Runner";
-    group = "gitlab-runner";
-    extraGroups = [ "docker" ];
-    createHome = true;
-  };
-  users.groups.gitlab-runner.gid = config.ids.gids.gitlab-runner;
-}
--- a/m/tent/monitoring.nix
+++ b/m/tent/monitoring.nix
@ -1,217 +0,0 @@
-{ config, lib, pkgs, ... }:
-
-{
-  imports = [
-    ../module/meteocat-exporter.nix
-    ../module/upc-qaire-exporter.nix
-    ../module/nix-daemon-exporter.nix
-  ];
-
-  age.secrets.grafanaJungleRobotPassword = {
-    file = ../../secrets/jungle-robot-password.age;
-    owner = "grafana";
-    mode = "400";
-  };
-
-  services.grafana = {
-    enable = true;
-    settings = {
-      server = {
-        domain = "jungle.bsc.es";
-        root_url = "%(protocol)s://%(domain)s/grafana";
-        serve_from_sub_path = true;
-        http_port = 2342;
-        http_addr = "127.0.0.1";
-      };
-      smtp = {
-        enabled = true;
-        from_address = "jungle-robot@bsc.es";
-        user = "jungle-robot";
-        # Read the password from a file, which is only readable by grafana user
-        # https://grafana.com/docs/grafana/latest/setup-grafana/configure-grafana/#file-provider
-        password = "$__file{${config.age.secrets.grafanaJungleRobotPassword.path}}";
-        host = "mail.bsc.es:465";
-        startTLS_policy = "NoStartTLS";
-      };
-      feature_toggles.publicDashboards = true;
-      "auth.anonymous".enabled = true;
-      log.level = "warn";
-    };
-  };
-
-  services.prometheus = {
-    enable = true;
-    port = 9001;
-    retentionTime = "5y";
-    listenAddress = "127.0.0.1";
-  };
-
-  # We need access to the devices to monitor the disk space
-  systemd.services.prometheus-node-exporter.serviceConfig.PrivateDevices = lib.mkForce false;
-  systemd.services.prometheus-node-exporter.serviceConfig.ProtectHome = lib.mkForce "read-only";
-
-  # Credentials for IPMI exporter
-  age.secrets.ipmiYml = {
-    file = ../../secrets/ipmi.yml.age;
-    owner = "ipmi-exporter";
-  };
-
-  # Create an IPMI group and assign the ipmi0 device
-  users.groups.ipmi = {};
-  services.udev.extraRules = ''
-    SUBSYSTEM=="ipmi", KERNEL=="ipmi0", GROUP="ipmi", MODE="0660"
-  '';
-
-  # Add a new ipmi-exporter user that can read the ipmi0 device
-  users.users.ipmi-exporter = {
-    isSystemUser = true;
-    group = "ipmi";
-  };
-
-  # Disable dynamic user so we have the ipmi-exporter user available for the credentials
-  systemd.services.prometheus-ipmi-exporter.serviceConfig = {
-    DynamicUser = lib.mkForce false;
-    PrivateDevices = lib.mkForce false;
-    User = lib.mkForce "ipmi-exporter";
-    Group = lib.mkForce "ipmi";
-    RestrictNamespaces = lib.mkForce false;
-    # Fake uid to 0 so it shuts up
-    ExecStart = let
-      cfg = config.services.prometheus.exporters.ipmi;
-    in lib.mkForce (lib.concatStringsSep " " ([
-      "${pkgs.util-linux}/bin/unshare --map-user 0"
-      "${pkgs.prometheus-ipmi-exporter}/bin/ipmi_exporter"
-      "--web.listen-address ${cfg.listenAddress}:${toString cfg.port}"
-      "--config.file ${lib.escapeShellArg cfg.configFile}"
-    ] ++ cfg.extraFlags));
-  };
-
-  services.prometheus = {
-    exporters = {
-      ipmi = {
-        enable = true;
-        configFile = config.age.secrets.ipmiYml.path;
-        #extraFlags = [ "--log.level=debug" ];
-        listenAddress = "127.0.0.1";
-      };
-      node = {
-        enable = true;
-        enabledCollectors = [ "logind" ];
-        port = 9002;
-        listenAddress = "127.0.0.1";
-      };
-      blackbox = {
-        enable = true;
-        listenAddress = "127.0.0.1";
-        configFile = ./blackbox.yml;
-      };
-    };
-
-    scrapeConfigs = [
-      {
-        job_name = "local";
-        static_configs = [{
-          targets = [
-            "127.0.0.1:9002" # Node exporter
-            #"127.0.0.1:9115" # Blackbox exporter
-            "127.0.0.1:9290" # IPMI exporter for local node
-            "127.0.0.1:9928" # UPC Qaire custom exporter
-            "127.0.0.1:9929" # Meteocat custom exporter
-            "127.0.0.1:9999" # Nix-daemon custom exporter
-          ];
-        }];
-      }
-      {
-        job_name = "blackbox-http";
-        metrics_path = "/probe";
-        params = { module = [ "http_2xx" ]; };
-        static_configs = [{
-          targets = [
-            "https://www.google.com/robots.txt"
-            "https://pm.bsc.es/"
-            "https://pm.bsc.es/gitlab/"
-            "https://jungle.bsc.es/"
-            "https://gitlab.bsc.es/"
-          ];
-        }];
-        relabel_configs = [
-          {
-            # Takes the address and sets it in the "target=<xyz>" URL parameter
-            source_labels = [ "__address__" ];
-            target_label = "__param_target";
-          }
-          {
-            # Sets the "instance" label with the remote host we are querying
-            source_labels = [ "__param_target" ];
-            target_label = "instance";
-          }
-          {
-            # Shows the host target address instead of the blackbox address
-            target_label = "__address__";
-            replacement = "127.0.0.1:9115";
-          }
-        ];
-      }
-      {
-        job_name = "blackbox-icmp";
-        metrics_path = "/probe";
-        params = { module = [ "icmp" ]; };
-        static_configs = [{
-          targets = [
-            "1.1.1.1"
-            "8.8.8.8"
-            "ssfhead"
-            "raccoon"
-            "anella-bsc.cesca.cat"
-            "upc-anella.cesca.cat"
-            "fox.ac.upc.edu"
-            "fox-ipmi.ac.upc.edu"
-            "arenys5.ac.upc.edu"
-            "arenys0-2.ac.upc.edu"
-            "epi01.bsc.es"
-            "axle.bsc.es"
-          ];
-        }];
-        relabel_configs = [
-          {
-            # Takes the address and sets it in the "target=<xyz>" URL parameter
-            source_labels = [ "__address__" ];
-            target_label = "__param_target";
-          }
-          {
-            # Sets the "instance" label with the remote host we are querying
-            source_labels = [ "__param_target" ];
-            target_label = "instance";
-          }
-          {
-            # Shows the host target address instead of the blackbox address
-            target_label = "__address__";
-            replacement = "127.0.0.1:9115";
-          }
-        ];
-      }
-      {
-        job_name = "ipmi-raccoon";
-        metrics_path = "/ipmi";
-        static_configs = [
-          { targets = [ "127.0.0.1:9290" ]; }
-        ];
-        params = {
-          target = [ "raccoon-ipmi" ];
-          module = [ "raccoon" ];
-        };
-      }
-      {
-        job_name = "ipmi-fox";
-        metrics_path = "/ipmi";
-        static_configs = [
-          { targets = [ "127.0.0.1:9290" ]; }
-        ];
-        params = {
-          target = [ "fox-ipmi.ac.upc.edu" ];
-          module = [ "fox" ];
-        };
-      }
-    ];
-  };
-}
--- a/m/tent/nginx.nix
+++ b/m/tent/nginx.nix
@ -1,79 +0,0 @@
-{ theFlake, pkgs, ... }:
-let
-  website = pkgs.stdenv.mkDerivation {
-    name = "jungle-web";
-    src = pkgs.fetchgit {
-      url = "https://jungle.bsc.es/git/rarias/jungle-website.git";
-      rev = "739bf0175a7f05380fe7ad7023ff1d60db1710e1";
-      hash = "sha256-ea5DzhYTzZ9TmqD+x95rdNdLbxPnBluqlYH2NmBYmc4=";
-    };
-    buildInputs = [ pkgs.hugo ];
-    buildPhase = ''
-      rm -rf public/
-      hugo
-    '';
-    installPhase = ''
-      cp -r public $out
-    '';
-    # Don't mess doc/
-    dontFixup = true;
-  };
-in
-{
-  networking.firewall.allowedTCPPorts = [ 80 ];
-  services.nginx = {
-    enable = true;
-    virtualHosts."jungle.bsc.es" = {
-      root = "${website}";
-      listen = [
-        {
-          addr = "0.0.0.0";
-          port = 80;
-        }
-      ];
-      extraConfig = ''
-        set_real_ip_from 127.0.0.1;
-        set_real_ip_from 84.88.52.107;
-        real_ip_recursive on;
-        real_ip_header X-Forwarded-For;
-
-        location /git {
-          rewrite ^/git$ / break;
-          rewrite ^/git/(.*) /$1 break;
-          proxy_pass http://127.0.0.1:3000;
-          proxy_redirect http:// $scheme://;
-        }
-        location /cache {
-          rewrite ^/cache/(.*) /$1 break;
-          proxy_pass http://127.0.0.1:5000;
-          proxy_redirect http:// $scheme://;
-        }
-        location /lists {
-          proxy_pass http://127.0.0.1:8081;
-          proxy_redirect http:// $scheme://;
-        }
-        location /grafana {
-          proxy_pass http://127.0.0.1:2342;
-          proxy_redirect http:// $scheme://;
-          proxy_set_header Host $host;
-          # Websockets
-          proxy_http_version 1.1;
-          proxy_set_header Upgrade $http_upgrade;
-          proxy_set_header Connection "upgrade";
-        }
-        location ~ ^/~(.+?)(/.*)?$ {
-          alias /vault/home/$1/public_html$2;
-          index  index.html index.htm;
-          autoindex on;
-          absolute_redirect off;
-        }
-        location /p/ {
-          alias /var/lib/p/;
-        }
-        location /pub/ {
-          alias /vault/pub/;
-        }
-      '';
-    };
-  };
-}
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Aleix Boné	cf3543690d	Make lib imports in overlay explicit	2025-09-29 12:54:22 +02:00
Aleix Boné	46524cd2ec	Set strictDeps=true on our top level packages	2025-09-29 12:54:22 +02:00